Is Personnel Number cross company code?

Hi,
Have a very fundermental question. Is Personnel number cross company codes? For example, if there are 2 company codes (A and B) in one SAP box and there is an employee in company code A who has the personnel number 900001. Can another employee in company code B has the same peronnel number 900001?
Thanks,
Ting

Hi,
It is not. You may not have two persons with same Personnel number, no matter if they are in differents Company Codes. There is just one Personnel number and it must be assigned to only one employee.
Regards,
Edoardo

Similar Messages

Cross-company code posting BAPI_ACC_DOCUMENT_POST number range

When I use BAPI_ACC_DOCUMENT_POST for cross-company code - I put the first company code in the header and first line item and the second company code in the second line item.
This posts - however there is a BIG problem with the document numbers it posts:
1. It posts both company codes using the number range of the second company code.
2. It updates NRIV for only the second company code.
How do I get this to work properly and post with the correct number range for the first company code.

Not sure if this applies to you or not - check Note OSS 419588 - Distributing cash discount base amounts in tax calculation.

How to use Cross Company Code document number as Reffrence.

Hi
Actually user wants to post the same debit credit line items with Editing the amounts which he has posted last month
So i suggested him to use post refference of the previous month document number.
Since that is Cross company document number. There is no source to give in T.Code FBR2. There is a fecility to give only document number of a company code not cross company code.
Assume that there are 3 company's involved in that document.
company X --- 25 line items
company Y -- 75 line items
Company Z -- 100 line items
Since he given in header data X Co code it has generated the Cross company code document number 1000X 08 ( which means 1000 is doc.number X is company code 08 is year. This is sap standard cross company code doc number format)
and individual document number is
X - 1000
Y- 2000
Y- 3000
If he post with the reffrence of X company only 25 lines will come remaining 175 line he as to post manually.
If he take Y Doc number only 75 lines will come
If he take Z Doc number only 100 lines will come
To bring all lines there is no provision to give Cross company Doc number.
Please advice how to use cross company doc number as refference.
Tks
Shivaji

Hi guru
This is answered
Thanks
shivaji

How to configure Funds Transfers, Cross Company Code Vendor Payments, Bill

Hi All,
Can any one help me, How to configure Funds Transfers, Cross Company Code Vendor Payments, Bill of Exchnage Payments with Automatic Payment Program?
Regards
Chandra

Hi Chandra,
This is what you need to do to configure Cross Company Code Vendor Payments.
Execute transaction code OBYA, when prompted, type in 1st coy code, say A and then 2nd coy code, say B. This would take you to the "Maintain FI Configuration: Automatic Posting - Clearing Accounts" screen.
In the first frame, where you have
Posted in : A
Cleared Against : B
Under Receivable
Debit Posting Key : 01
Account Debit : Account Number (The account can be a G/L account, a customer account or a vendor account)
Under Payable
Credit Posting Key : 31
Account Credit : Account Number (The account can be a G/L account, a customer account or a vendor account).
In the second Frame
Posted in : B
Cleared Against : A
Under Receivable
Debit Posting Key : 01
Account Debit : Account Number (The account can be a G/L account, a customer account or a vendor account)
Under Payable
Credit Posting Key : 31
Account Credit : Account Number (The account can be a G/L account, a customer account or a vendor account).
So, if you are using the Customer/Vendor approach, company A must be set up as both a Customer(Use Txn Code XD01) and a Vendor(USe Txn Code XK01) in Company B and vice versa.
Once you have completed this set-up, you can then use transaction F.13 and/or F13E to carry out your automatic clearing. Alternatively, whenever Payment Run is executed via transaction code F110, this would automatically clear out the payables and receivables in each company code.
However, if you intend to use the G/L approach, then the account numbers would be Inter-coy G/L account for each coy code as defined in the chart of accounts.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

Automatically clear the open items for a GL account cross company codes

Hi FICO experts,
Can anyone help me on the following issue urgently?
There are journal entries posted to same GL account with different company code. Is there any way to automatically clear the open items sitting in the GL account in company code A to against the open items for the same GL account in company code B.
The example is below:
Journal in company code A
Dr. 840410      $100
Cr. 111300       $100
Journal in company code B
Dr. 111301   $100
Cr. 840410      $100
Now I want to automatically clear account 840410 by using assignment or text in the journal entry.
It will be highly appreciated for any instructions.
Adele

Hello Adele Wang,
You can enter cross-company code transactions in one step in the General Ledger, Accounts Receivable, and Accounts Payable application components. This function would be used, for example, for centralized procurement or payment.
Integration:For centralized payments, each individual company code enters its own invoices separately, while a central company code pays them. When you are clearing open items, the system makes clearing entries between the company codes participating in the clearing procedure. These clearing entries represent the receivables and payables that exist between the company codes in centralized payment.
Prerequisites:You have specified which company codes are to be processed via a single company code. In this specification, you can distinguish between clearing transactions. You can therefore have different combinations of company codes for incoming and outgoing payments.
You have specified the clearing accounts that record the receivables and payables between the individual company codes. The system posts to these accounts automatically when clearing the open items.
You need to make the required settings in the activity Prepare Cross-Company Code Manual Payments in Customizing for Financial Accounting (Accounts Receivable and Accounts Payable->Business Transactions->Outgoing Payments->Manual Outgoing Payments).
Features:For each company code, the system generates a separate clearing document. A joint transaction number marks these documents as belonging together.
Example:For a clearing transaction (incoming payment, outgoing payment), you have agreed in Customizing that if company code 0001 is specified, open items are also selected from other company codes (0002 and 0003).
Hope I had been able to help you. Please assign points.
Rgds
manish
Clearing can then also be carried out if the account to be cleared has not been created in company code 0001. As long as no items have to be posted to this account in company code 0001, it is not necessary to create a master record for the account in company code 0001.
See also:

Directly display cross company code document overview in FBL1N

Hi Buddy
My user wants to display cross company code document overview in FBL1N Directly, after execute.
Instead of going FBL1N --> execute --> Vendor line item display --> once click on cross company code document number than it will take to Display document at lie item level --> once click on call up document overview (F9) than it will display cross company code document overview in FBL1N
It suggested to user we can use FBU3 for cross company code document overview.
But user wants in FBL1N --> execute --> Vendor line item display --> once click on cross company code document number -->than it has to display cross company code document overview in FBL1N.
Is there any possibility in FBL1N or ells we need to create Z. T CODE? For the same.
Thanks in advance.
Regards
asuvamsi

Hi, Experts,
Once i execute the report FBL1N with user's user ID, i have double click on docuement and i click on document overview(At mountain button) it is displaying the respective comapny code wise docuement overview
if i am executing with our user ID it is displaying cross company code docuement overview once click on document overview (At mountain button)
How it possible i have checked SU53 T.code also, there are no authorization problem for both user ID's
Could any body please give me suggestions on the same.
Thanks.
Regards
asuvamsi
Edited by: asuvamsi on Dec 28, 2011 11:24 AM

While doing cross company code postings I get an error

Hi experts,
I have an issue on cross company code postings through FB60. There is a vendor account which has been extended to both company codes. The amount of invoice is Rs.10000 of which 6000 to be accounted in company code 1000 and 4000 in company code 5000. When this is done we get an error 'A unique company code has not been assigned to company number A001'.
After trying several options, I have found one solution. In the test system I Went to classify FI document types for document splitting, against document type KR transaction 0300 (Vendor invoice) was there. I changed to 0000 (unspecified posting). Once this was done, I was able to post cross company transactions without any problem.
I would like to know as to what would be the impact? Would this change create any other issue?
I request you to give your expert opinion on this.
Regards,
Ramkumar B.
Duplicate thread, therefore it will be locked, please avoid creating different threads for the same subject.
check the responses in thread While doing cross company code postings I get an error
FI Moderator

Dear,
When you are posting vendor Invoice through FB60 then system creates accounting document "KR" and when document splitting is activated in system the you have to assign Doc type KR to Transaction 0300 and 0001.
This is standard requirement. There will not be any changes by doing this.
Hope it is clear..
Br,Vivek

Creating Cross Company Code Vendors/Customers.

Hi All,
I'm trying to understand how to create cross company code Vendors and Customers. I've already established the link with configuring OBYA. What I'm not clear is on which company code I should be creating the vendor and customer.
We have two company codes, 2100 & 0980. CC 2100 has the central bank tha pays invoices for CC 0980. I have two issues.
1. What kind of configuration is needed to accept incoming payments into CC 2100 House banks and lockboxes?
2. For intercompany activity between 2100 & 0980 how are the vendor and customer master records set up? I know there needs to be a vendor on the customer master and a customer on the vendor master.
So for 0980 acting like a vendor for 2100 I'm assuming the vendor number for 0980 is set up as a 2100 vendor.
The same is true when acting as a customer. The difference being is that this vendor entered into a field on the customer master and the customer number is entered on a field in the vendor master.
I'm missing how the Vendor record, if created on Company Code 2100 gets linked to Company Code 0980.

For SAP to 'know' that a particular vendor / customer master records represents a specific company code, all these needs to be linked to the same 'company'.
Companies are maintained in T880 (IMG : enterprise structure -> definition -> Fin Acctg -> Define Company
Company code is linked to a company in the cocode config. IMG enterprise structure -> Assignment -> Fin Acctg -> Assign comp. code to company
And finally, the Trading Partner field in the Customer/vendor master is where you assign the company to the cust/vendor.
This setup will eventually allow you to consolidate interco A/R, A/P, etc.. if you need to but is not necessary for the interco process to post.(although you'd want to have it rght from the get go)

Version 4.6c Cross Company Code Incoming payment to lockbox.

In version 4.6c I am trying to find out the correct IMG configuration for processing incoming payments to a lockbox when multiple companies are using one company for banking. Here is what I have done so far:
Here are the company codes: 2100 has house banks and lockbox set up.
0980 does not have house bank or lockbox.
OX16 - all both company codes involved are assigned to the same Company.
OBVU - Non-bank company code 0980 has 2100 set up as Paying Company Code
OBYA - Clearing accounts have been set up between 0980-2100.
OB05 - Accounting Clerk has been set up for both company codes.
OB10 - Lockbox from 2100 has been set up for 0980. Even though 0980 does not have a House bank set up, IMG Configuration did allow the lockbox and house bank for 2100 to be saved under 0980.
OB96 - Forms to be used were linked to 0980
One issue we are having is that when we attempt to set up a Customer for 0980 a field for Lockbox is required to be entered. When the 2100 Lockbox is input, an error message pops up saying that 0980 does not have a House Bank.
Can someone please explain how to complete the configuration for this type of activity in version 4.6c? Also should we be using F-28, FB05 or some other t-code to post incoming payments.

Hello,
You can post the cross company code postings even between two controlling areas. The system does not prevent to post documents between two company codes in two controlling area. Need not necessarily they should be under one operating concern. Provided you have to make sure that you have followed the following points:
In OBY6 - To company codes must be assigned to same Company, meaning that you mus thave created a Company and that company must have been assigned to these two company codes.
OBYA - You should maintain the clearing accounts in both the company codes. Meaning that you are posting one leg in one company code and the other leg in the other company. Therefore, it is required to have the missing legs in each company code.
Company Code1 - Posting Key 40 - Clearing Account
Company Code1 - Posting Key 50 - Clearing Account
Company Code2 - Positng Key 40 - Clearing Account
Company Code2 - Posting Key 50 - Clearing Account
OB08 - In case if the two company codes have different local (company code) currencies, you may maintain the exchange rates.
You can now go to F-02 and post a cross company code transaction giving the first leg in first company code and the second leg in second company code. Missing leg in the first company code will be posted to the GL Account mentioned in OBYA and the missing leg in the second company code will be posted to the GL Account mentioned in OBYA. That means you will have four line items overall.
The system will post three document.
Document 1 in First Company Code
Document 2 in Second Company Code
and
Document3 - Cross Company Code Document.
The cross company code document consists of the first company code document number plus company code plus last two digits of the fiscal year.
Hope this must have clarified your doubts.
Please let me know in case if you need further details.
Thanks,
Ravi

Cross-company code postings - FI validation

Hi,
We start using the cross-company code postings (transaction OBYA) between company code A and company code B and have to give authorizations both company codes to the Finance users. The idea is to have a set of G/L accounts which are allowed to be used when company code A and B are posted via cross-company code posting.
SAP recommends to implement a validation in FI to restrict the Intercompany scenatios. I attempted to create a FI validation for complete document (call-point 3) with no success:
1)
IC Rule: BSEG-BUKRS = A and BSEG-BUKRS = B and BSEG-HKONT IN ACCOUNTSET
Prerequisite: TRUE
Check: IC rule
Message: E- Account & not allowed for cross-company postings
When I test it, the Intercompany clearing account configured in OBYA, and which is in ACCOUNTSET, shows up in the error message, which unwanted.
2)
IC Rule 1: BKPF-BUKRS = '0017' AND BKPF-BUKRS = '0005'
IC Rule 2: BSEG-HKONT IN ACCOUNTSET
Prerequisite: TRUE
Check: IC Rule 1 --> IC Rule 2
Message: E- Account & not allowed for cross-company postings
No error message is issued at all, even if the G/L account is not in ACCOUNTSET.
Please advise what I am missing.

Hi Nitin,
Thank you for your feeback.
I just wanted to clarify that the cross-company code posting is when company code A can intitiate a posting to company code B simultaneously (for example Intercompany re-charge, cash concentration, etc.). The trigger for cross-company code posting is the company code field on the line item. If company code A is in the header (BKPF-BUKRS) and at least one document line item filled up as company code B, the system created two documents for each company code, offsetting the Intercompany clearing account, configured in OBYA.
For example:
Posting via FB50: Leading company code = company code A (BKPF-BUKRS)
Item 1: Debit; G/L account 1; Cost Center 1; Amount 200; Company code A (as a default)
Item 2: Debit; G/L account 1; Cost Center 2; Amount 100; Company code B (manually changed)
Item 2: Credit; G/L account 2;                        Amount 300; Company code A (as a default)
The systen creates two postings:
Posting 1: company code A
Item 1: Debit; G/L account 1; Cost Center 1; Amount 200;
Item 2: Credit; G/L account 2;                        Amount 300;
Item 2: Debit ; I/C Clearing Account;              Amount 100;
Posting 2: company code B
Item 1: Debit; G/L account 1; Cost Center 2; Amount 100;
Item 2: Credit;I/C Clearing Account;              Amount 100;
The only connection between the two is the cross-company code number (BKPF-BVORG), which assigned by the system once posted, as a logical connection.
I guess we could use a dedicated document type. If that's the case, how would the validation work then?
Coudl you please share more details on the BTE option?
Thank you,
Inna

Cross Company Code Incoming Payment Clearing

Dear All
Good day to you.
I would be grateful if I could get advice on the following:
Process:
Company Code A is receiving Payment from Customer Z of Company Code B
Present SAP Treatment
F-02 Company Code A Bank Account is debited and Customer Z of Company Code B is credited.
F-32 Customer Z's Invoice of Company Code B cleared against the Payment received by Company Code A.
Hence this has become a two step process.
Ideal solution needed
In F-28 or similar other transaction
Company Code A Bank Account is debited and Customer Z of Company Code B is credited and clearing also carried out then and there?
To achieve the ideal solution above what are the configurations (if any) needed.
Thanking you in advance.
Regards
Siddique

Hello,
You can post the cross company code postings even between two controlling areas. The system does not prevent to post documents between two company codes in two controlling area. Need not necessarily they should be under one operating concern. Provided you have to make sure that you have followed the following points:
In OBY6 - To company codes must be assigned to same Company, meaning that you mus thave created a Company and that company must have been assigned to these two company codes.
OBYA - You should maintain the clearing accounts in both the company codes. Meaning that you are posting one leg in one company code and the other leg in the other company. Therefore, it is required to have the missing legs in each company code.
Company Code1 - Posting Key 40 - Clearing Account
Company Code1 - Posting Key 50 - Clearing Account
Company Code2 - Positng Key 40 - Clearing Account
Company Code2 - Posting Key 50 - Clearing Account
OB08 - In case if the two company codes have different local (company code) currencies, you may maintain the exchange rates.
You can now go to F-02 and post a cross company code transaction giving the first leg in first company code and the second leg in second company code. Missing leg in the first company code will be posted to the GL Account mentioned in OBYA and the missing leg in the second company code will be posted to the GL Account mentioned in OBYA. That means you will have four line items overall.
The system will post three document.
Document 1 in First Company Code
Document 2 in Second Company Code
and
Document3 - Cross Company Code Document.
The cross company code document consists of the first company code document number plus company code plus last two digits of the fiscal year.
Hope this must have clarified your doubts.
Please let me know in case if you need further details.
Thanks,
Ravi

Cross company code transaction error in F-48

Dear all
I have a problem in cross company code posting. I have done all the settings like company codes are assigned to company(OX16) and i maintained gl accounts in OBYA also. When i am trying to post cross company code posting i am getting the error:
A unique company code has not been assigned to company number XXXXXX
Message no. GLT0001
Diagnosis
Document breakdown is active in your system. In certain cases, a company code is derived from the company ID number, and this must lead to the assignment of a unique company code.
A unique company code could not be assigned to company number XXXXXX.
System Response
You cannot carry out the required posting.
Procedure
Assign one company code to company number XXXXXX.
Please tel me wt setting i have to do in system.
Thanks in advance
Thanks and Regards
Girish.

Hi Chandra,
Thanks for your information.
I tried in OB60 BUT still same error i am facing. we have activated document splitting .IF document splitting is deactivated then its working fine ,When document splitting is activated then we have facing this error,
If any notes or any setting please guide me.
Thanks and Regards
Girish

The question about EDI in scenario 'Cross-Company Code Sales Processing'?

I'm doing the exercise with IDES system for the scenario 'Cross-Company Code Sales Processing'.
But when posting the EDI, it gave me the error as followings:
there are related data in table EDPP1, including customer and vendor data, but it still informed me the questions.
pls help!
Object 0090033869
Output type: tst IV for MM by ken
Processing log for program RSNASTED routine EDI_PROCESSING
EDI: Partner profile not available
EDI: Partner profile not available
    Message no. E0332
Diagnosis
    A partner profile could not be found with the following key:
    /0000000000/LI/
    This involves the key fields of the table EDPP1:
    -PARNUM partner number
    -PARTYP partner type
Procedure
    Please check the EDI partner profiles.
    Execute function

Hi
Partner profile is not seems to be maintained in tcode WE20.
Please maintain in WE20.
Kind Regards
sandeep

BAPI for cross company-code stock transport order

Hello experts,
I need to create cross company-code stock transport orders, is there any bapi that can perform this? If you guys have some sample code it will be great.
PD: i found the bapi BAPI_PO_CREATE1, but i don't really know if it'll work for this requirement.

Hi Team,
I have created two company codes 5000 and 5005 and then assigned the plants 5000 and 5005 to company code respectively.
Here my supplying plant is 5005 and receiving plant is 5000.
Also I have created a vendor 1000 with account group 0007 and assigned the supplying plant 5005 to it.
1. How do we assign sales and distribution (SD) organizational units to the supplying plant?
2. Whether we have to create customer master (using Tcode XD01) for the supplying plant?
3. While creating the customer master, the company code and sales area (sales organization, distribution channel, division) must be of supplying company code / plant?
4. Whether we have to create customer master for receiving plant?
5. While assigning the customer master to plant, which sales area info (sales organization, distribution channel, division) has to give?
Please give the detail from customer master creation and assigning it to plant.
Thanks in advance,
Regards,
Shyjith
REPLY -
Hi Shyjith,
1. Create vendor 1000 as internal vendor in company code 5000 & assign supplying plant 5005 in additional data in Purchasing tab.
2. Create receiving plant as 5000 as internal customer in company code 5005 & respective sales area of 5005 , if you have no other numbre range for internal customer.
3.In SPRO do the following settings,
a.efine shipping data for both receiving & supplying plant --- SPRO - MM -- Purchasing -- Purchase order --- Set up stock transport order -- define shipping data for plants
b. Assign delivery type as NLCC to supplying plant 5005.
Craete Purchase order with vendor as 1000 & plant in purchase order as 5000 ( If not defined any external number for customer)
Please note if you have defined external muber for customer 5000, the n you have to define that number, when you will be defining shipping data for receiving plant as customer.
Thanks,
Charu

Settlement of WBS/Project Profile (Cross Company Code)

Hello All,
At my current client, we are having 45 company codes assigned to one controlling area.My question is around setting of Project Profile/Settlement Profile. How do I manage project profiles?
Also If I am managing few project profiles allowing cross company code settlement, what are the pros and cons of doing this? What are the bare minimums for this with respect to configuration
Thanks
Shiv

projects are cross company codes but must be wuithin oine controlling area - so you are ok
the settlement will be from an object either WBS or network activity
the settlement will happen in the company code that is assigned to either the WBS or network activity
regards project profile create as less as possible - if the only difference is the company code then use templates for different companies, or make company code mandatory forcing the user to enter on creation - this will limit the number of project profiles

Is Personnel Number cross company code?

Similar Messages

Maybe you are looking for