Is Photoshop CC able to work with Bridge CS6 or other CS6 applications ?

Is Photoshop CC or any other CC application able to work with CS6 applications such as Bridge CS6?

Asking in the specific forums will give you answers from users of those programs
Not that Mylenium doesn't know, but this forum is not about using specific programs
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Similar Messages

Will Photoshop CC work with Bridge CS6

Hi
I'm about to download Photoshop CC (Windows 7). I already have Photoshop CS6 and Bridge CS6 installed. My questions is do I have to download and install Bridge CC or will Photoshop CC work ok with Bridge CS6.
Thanks

Like versions communicate with each other with the statup scripts. So CS6 Bridge is going to call CS6 PS when you select PS/Tools. It has no communication link to CC.
You can open images in CC from CS6 but you will not be able to use Tools/photoshop to call up Bridge CC.

Tried to run 'socksify firefox' command in RHEL. This Doesn't work with Firefox while all other internet applications could be socksified.

I use Red hat enterprise linux and I need to connect to AIX servers which host my J2EE applications. I connect mainly for using our application through browser, FTPing and SSH-ing. I use Dante socks client. I socksify every application explisitely that connects our AIX servers. Eg. socksify ssh, or socksify gftp etc. Even I could run 'socksify opera'. However my favourite browser says no for 'socksify firefox'. I do not know if its a issue or may be there are other ways to achieve this. I know I can mention SOCKS proxy in firefox preferences, however I need to connects to several AIX servers through different socks servers. This requires me to use socks.conf. Can anyone help me to use firefox for my J2EE applications? Thank you.

Works fine here if I click that link in your above post.<br />
<pre><nowiki> <a id="jelentkezes"> </a></nowiki></pre>
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size. How do I get the thumbnails back to the standard size and be able to work with them?

The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size. How do I get the thumbnails back to the standard size and be able to work with the photo files?

What version of iPhoto and system are you running? On the guess that you're running the latest iPhoto, 9.4.2, Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the thumnails, Option #2.
2 - It may take 2-3 attempts so don't give up after only one attempt.
OT

Adobe Photoshop CS5 is not working with Lion.

Adobe Photoshop CS5 is not working with Lion. It is totally non responsive to a point where i cannot work. all other CS5 programs seem to be running well so far. any advice? if no, then how do i revert back to Snow leopard?

I had real problems with all Adobe apps - it said I needed to install a version of Jave Runtime, but kept saying that I wasn't connected to the internet to complete the action. This was not the case - I was connected to the internet.
I followed this link : http://support.apple.com/kb/DL1421 to install a version of Java and all Adobe apps fire up now. Haven't done much testing within the apps, but at least I'm further ahead than I was.
So thanks to the message boards for helping me out.
Reg

Will ACR 5.6 RC work with Bridge CS3

I have gotten the RC to install for Elements 6.0 on OS X. Bridge CS3 however either displays very fuzzy previews if you use thumbnails generated from 5.5 or if you purge the cache, will not display any thumbnails for .CR2 files created with a 7D or ARW files created with a Sony A100.
Is it supposed to work with Bridge CS3 or are we going to have to upgrade to Elements 8 to have it work with 5.6?

Well, I guess it is a good thing I have already ordered Elements 8 which I think includes Bridge CS4.

I double-click on event to see all the photos in that event displayed, but all I get is 1 large photo on the edit page. To see the photos in that event, I have to scroll. Need to be able to work with all the photos in that event, not one at a time.

I double-click on event to see all the photos in that event displayed, but all I get is 1 large photo on the edit page. To see the photos in that event, I have to scroll. Need to be able to work with all the photos in that event, not one at a time.

Maybe you need to adjust the zoom slider in the lower left corner of the window?
Regards
Léonie

I cant upgrade camera raw and need to to be able to work with new camera files why?

i cant upgrade camera raw and need to to be able to work with new camera files why?

Boilerplate text from Best Practices FAQ
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    * Adobe product and version number
    * Operating system and version number
    * The full text of any error message(s)
    * What you were doing when the problem occurred
    * Screenshots of the problem
    * Computer hardware, such as CPU; GPU; amount of RAM; etc.

Problem with Bridge CS6 and MCXRedirector (OS X 10.9.5)

Good afternoon all, I have a very irritating issue with Bridge CS6 that I've pretty much given up on now, so I'm wondering if anyone out there can help me before I do.
The issue lies with Bridge CS6 running in a networked Mac environment, first, a little background: I am using OS X Server's Workgroup Manager facility for various restrictions and folder redirection. Our users had a nasty bug a little while ago that caused saved Photoshop files to end up in ~/Library/Caches/TemporaryItems instead of the actual network home location they selected to save in. While this was happening, a single entry was being used in the MCXRedirectory preference to redirect the entire of ~/Library/Caches/
This was resolved by changing that preference and branching it out a little more, so now the folders subject to redirection are as follows:
~/Library/Caches/Adobe
~/Library/Caches/Adobe Camera Raw
~/Library/Caches/Meta
~/Library/Application Support/Adobe
Doing this fixed the saving issue with Photoshop, but has in turn broken Bridge. When launched, Bridge immediately fails with the error "Adobe Bridge CS6 quit unexpectedly" and gives the three options to ignore, report or reopen.
Taking away the ~/Library/Caches/Adobe redirection allows Bridge to work as normal again, but then I'm back to square one with Photoshop files saving in TemporaryItems again.
Does anyone have any advice to remedy this annoying problem please?
Thanks in advance.
EDIT: Bridge version is 5.0.2.4

Sorry, did not solve the problem. The info given did not bear much relation to what I could see in the print drop down box. I have been through all settings I can access and every thing appears normal. The print preview in the print box appears normal and shows colour, but this does not translate to the actual print.
When printing a docuement of 3 pages or more using double sided the result is the first docuement page on one side of a sheet and the last page on the other side, but upside down, despite orientation set to long edge binding. All other pages between first and last are ignored.
When printing docuements originating from printer software such as Print Quality Diagnostic and Make The Most Of Your Printer, the printer performs correctly with good quality printing and colour.
I assume that the Mac update to 10.9.5 has corrupted something but I am not knowkedgeable enough to understand what. Any further assistance would be greatly appreciated.

Bridge CC cache not compatible with bridge CS6

Starting the Photoshop CC adventure. First install was Bridge. First test was to see if the Bridge CC cache is compatible with Bridge CS6 cache. First result is NO.
Test method:
1. Set the Bridge CC cache location to the same folder I use for CS6, which contains 10+ gigs of thumbs for my library.
2. Navigated Bridge CC to a sub-folder with about 30 images, see Bridge CC re-do the thumb extractions.
3. Close Bridge CC, launch Bridge CS6, navigate to the same sub-folder, see Bridge CS6 re-do the thumb extractions.
4. Close Bridge CS6, launch Bridge CC, still pointing to the same sub-folder, see it re-do thumb extractions again.
5. Repeat steps 3&4, always with same result, a redundant re-generation of thumbs.
Conclusion:
The actual thumbnail files in the cache are the same. But something happens in the index files (data/store) to make each version think it does not have thumbnails, so it re-generates them. IOW, when Bridge CC looks at the cache last used by Bridge CS6 it says "I have not been here, must re-cache", and visa-versa.
Solution:
Must let Bridge CC have its own separate cache, so the two versions don't walk over each other. Must let Bridge CC re-cache everything, which for me (and most users I assume) will be a long and time consuming process.
Not much surprise here. The same was true for CS5 vs. CS6.

Not much surprise here. The same was true for CS5 vs. CS6.
Then it also should not be a surprise for you that this behavior already started in the Filebrowser (Bridge predecessor that came with CS1 and by far the most stable and fast cache ever in the history of Bridge) and has not changed since. Nor is it likely it will chance in the future.
Hence my advice to not use Bridge for long term DAM because you need to recache the lot every new version...

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.
Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
Any suggestions, please?

Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

AIR SDK 17 (BETA) is not working with Flash CS6

Hi,
The latest AIR SDK 17 is not working with Flash CS6.
I tried to publish and install an iOS app to my connected device via USB but I always get an error "Check if iTunes is installed".
The latest stable AIR SDK 16 is working fine, and yes, iTunes is installed on my PC.
DETAILS:
- Flash CS6
- AIR SDK 17
- System: Windows 8,1
- iPodTouch with iOS 8.1
REPRODUCE:
Open new AIR iOS template and publish/install it to a USB connected iOS 8.1 device.
Anyone else got that error?

I was getting this intermittently. Not a super problem. A remove and install in iTunes gets it loaded (after you tell ITunes where it is).

Safari won't work with CNN Pipeline and other sites all of a sudden?

Safari won't work with CNN Pipeline and other sites all of a sudden? A few weeks ago Safari was working OK but now I often have to use Firefox to visit certain webpages.
Anyone else having this same problem?
Is there a quick fix?
I'm using Safari 2.0.4
Thanks.

Hi QuickTimeKirk,
I have WMP version 9, as well. I do not use F4M, for many users f4mac is what helps.
I find some items work while others do not. I always get an alert about the wmp , which version it is, takes very long to load, I find it is not consistant with Safari, as seems the poster of this topic has found.
Quoted from ms Mactopia site:
http://www.microsoft.com/windows/windowsmedia/player/mac/
Download and find information about Windows Media Player for Mac and playing Windows Media files in your QuickTime Player. Which download is right for you?
Windows Media Components for QuickTime
Windows Media Player 9 for Mac OS X
Windows Media Player 7.1 for Mac
Important Information
Microsoft will continue to offer Windows Media Player for Mac as a download free of charge, but has no plans to provide future updates or product support.
We are pleased to offer Windows Media® Components for Quicktime, by Flip4Mac™, as an alternative for Mac OS X users wanting to play Windows Media Audio and Windows Media Video.
~•~
Validation of the cnn home page using the W3C Validatior, http://validator.w3.org/
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.cnn.com%2F
though 41 errors is not as poor as some, Firefox handles the site better than Safari, imo.
Some sites just work better with Firefox or an other browser.
Cheers,
Eme '~[ )

Mb sound not working. Can i add a sound card to work with PP cs6?

I have a sabertooth x58, pc, win 7. I lost the audio monitoring all of a sudden. Also tryed windows media player & all windows sounds are not being played as well. Tryed absolutely everything. Need to go to plan B.
Can i add a sound card to work with PP cs6?
http://www.newegg.com/Product/Product.aspx?Item=N82E16829132052

>Tryed absolutely everything
What does that mean?
Have you removed the sound card driver via control panel and let Win7 reinstall?

Does Windows8 works with InDesign CS6?

We are about to install windows8 on all computers in the office, but I am worried if it will work with InDesign CS6.

Hi Kiod@,
You can find the minimum requirement for CS6 in the below mentioned link .
Min Requirement : http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-indesign.html#main_I nDesign_CS6_system_requirements
Regards,
Kartikay Sharma

Is Photoshop CC able to work with Bridge CS6 or other CS6 applications ?

Similar Messages

Maybe you are looking for