Is possible Block the batch stock in the run MRP

Dear gurus,
i have a stock in the batch A , is possible block the stock for run MRP ( don't see the stock in the esecution MRP ) and create a planned order?
Thanks a lot
Daniele Pistilli
PP TEAM

Dear
MRP can't be run on Batch and the stock of the batch should be transferd to special stock like QI , Block stock so that MRP do not consider during Net Requirement Calcualtion even it is avaliable in the same storage loaction which is relevent for MRP run .
Basically , In order to exclude few Batches stock from MRP, SAP has come up with different categories of stock like blocked stock, restricted-use stock... etc.
you can transfer these stock into blocked/restricted use stock and enable the respective check box in T-code: OPPQ in "Available Stocks'Option (Maintain Plant Paramters screen) -Here Mark Block Stock so that MRP will not cosider the same .
After transfer of stock & Check Box enabled in OPPQ, execute MRP, system will not consider this stock.
Hope it helps
Regars
JH
Edited by: Jiaul Haque on Dec 21, 2010 1:09 PM
Edited by: Jiaul Haque on Dec 21, 2010 1:11 PM

Similar Messages

Transaction to view the Batch Stock as on any date

Is there any Transaction to view the Batch Stock as on any date?
Regrads
Soumen

I had already tried this. But it does not show the batches, it shows the material docs with batches.
I want like this:
Material Batch S Stock
Regards

Material forgot to tick the batch management but the GR and IR is done

Hello,
Material A should be in batch managed but the settings in the material master is forgot to ticked. PO is created as well as GR and IR is already completed. The invoice is posted and according to finance it is paid already and cannot cancel the invoice anymore. When trying to tick the batch management in the material master, an error is "Stocks already exist at plant level". Checking also MMBE, stocks showing in the Open Order quantity since the GR is cancelled.
Is there anyway I can tick the batch managed in the material master?

to set the indicator is less restrictiv than removing it. so just make the inventory in current and previous period zero.
you can see how much inventory you have in thosee 2 periods in MM03 valuation view or plant stock view.
follow instructions given in oss note 30656

Issue in printing the batch document with the T-code COPI

Issue in printing the batch document with the T-code COPI.
So Batch document is not printing not printing.
Kindly help.

I would suggest to read this blog as a starting point: Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers
then rephrase and enhance your question with some facts because in the moment it is not at all sufficient enough for anybody to help you further on your particular issue.
I am even in doubt that you posted this issue in the right forum, has this PP transaction really something to do with ABAP Connectivity. Check the space overview page of ABAP Connectivity , under the picture you can read what this space is about.

How to Print the Batch no in the AR Invoice , AR Credit memo

hi
Dear experts my client using SAP Business One 2007 B Patch 15 and i want to print the batch no in the AR Invoice print.
How can i do this? Please help me
I have already done setting in the Administration>>system intialization >>print Preference but then also system do not print the batch no in the AR Invoice document is created based on the Delivery
Please Reply ASAP
Regards
Rajani P Patel

Dear Joseph
I have also tried with the Document Printing but problem is not solved
do u have another way for this problem?
Regards
Rajani P Patel

Report to view the batch details of the products sold month wise

Report to view the batch details of the products sold month wise.
Please send it .

Dear Goutam
Use <b>MB51</b> where you can select the field "Batch".
Thanks
G. Lakshmipathi

Track the changes to the batch jobs in the PRD system.

Hello Basis Guru's,
Need your help in a Query. --> Is there any best practice that can be implemented to trace all the changes done to batch jobs in the past 3 months and going forward. Be it in its scheduling or its variant changes etc, i would like to track the changes to the batch jobs in the PRD system.
Any pointers would be really helpful.
Thanks in advance.
Rgds,
Sri

Hello Raghu,
Third party tools can only help you but not SAP. . A lot of us may think that for example if a Job 'X' runs daily then SAP considers this job as a single object.However actually SAP will treat each run of a job seperately infact as seperate jobs. If you would have noticed each job in SAP has a job id which is unique. So actually each run is unique. Now change logs can exist for only those objects that get changed. But change logs can not exist for objects that are newly created everytime !!
If you would have noticed you can two jobs with the name A but running two different reports/variants whatver. This is because job name is not that important it is the job id.
Every time a job runs a new entry gets stored in TBTCO,TBTCP etc.. tables. It is not that the existing entires are updated.However yes when a job is scheduled periodically there is some kind of a link that is created in the job series but it does not showo up in any of the tables!!
As far as 3rd party tool is concerned I can name a tool like UC4. UC4 has its own database in which the job name will always be unique. For that you can easily find change logs. I think Chronicle (Redwood Scheduler) also supports this.
Regards.
Ruchit.

My printer has stop printing from the photo tray. I need to place the photo stock in the main tray

I've a HP PhotoSmart Plus printer B210a. The printer will no longer print from the photo tray. I'm still able to get prints; but I must place the photo stock in the main tray. It becomes a problem, because I sometimes forget the photo stock is the main tray and I waste photo stock when I do my regular printing and only get part it because the photo was still in the tray. Anyway to fix this?

Hi there wmcook,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using and are there any errors when attempting to print from the photo tray?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Update the MTO stock into the total consumption list

Hi experts,
Is there any methods to update the MTO stock into the total consumption list?
Thanks,
Nadali

Hi,
What is your question exactly?
Consumption and stock are two different categories. Stock is the amount of goods you have and consumption is the amount of goods you consumed e.g. for production purpose.
If you consume you stock in MTS, MTO environment, the consumption of your stock will be realised trough movement types (e.g. 261) and you can report this. (MB51, MB53, COOIS)
So, if the consumption takes place, these reports (e.g. MB51) will show you the latest movements as well (if you run it after goods movement).
Please clarify your question.
BR
Csaba

How to upload the batch stock to bin level

Dear gurus
My client are going to implement WM i want to know how to upload existing batch stock to bin level.
regards
sam
Edited by: Csaba Szommer on May 25, 2011 12:10 PM

Hi,
You can use LSMW for Tcode LT01 to upload inital stock in WH.
So here u can enter all relevant data required like material, qty, batch, plant, Sloc etc..
Hope this helps you...
Rgds,
Kris.

Standard report to see the Batch numbers for the materials

Hi Gur's
I am searching for a standard report that would give out details from the purchase order. The details that i need are as following fields 1. Purchase order batch, 2. Purchase order number 3. material
can you any one help me on this
regards
AM

Hi Teja
You can use T-Code - MB51, here you can generate report material wise purchase order with batch numbers and here to see stock in so give movement type 101 to see all Batches received against purchase orders
regards
madhu

How to find out the batch class link of the batch record in the MSC3N

Hi,
I would like to know how to pull out the class type and the characteristic value for a batch which is found in MSC3N.
For example, the following is MSC3N screen showing material (INM000000001724945) and batch (A000001117) tie to batch class “XXXXXXXX”.
Hence, I would like to know:
How to pull out the class type and the characteristic value for a batch record which is found in MSC3N? What are the table? The table show in the F1 key is not a table.
There are two batch classes setup in the system “XXXXXXX” and “YYYYYYY”, my question is why system decides to use the batch class “XXXXXXX”? Where is the system setup to determine this?
Thanks
Tuff

Hi
The table MCH1 keeps the information about Material, Batch and Internal object no.: Batch classification (CUOBJ_BM).
The field CUOBJ_BM in MCHA represent the 'Key of object to be classified' (AUSP-OBJEK). The first 18 characters of AUSP-OBJEK.
In CABN (Characteristic) the field ATINN and ATNAM is important. The link between CABN and AUSP is through ATINN.

Need a bapi r fn module to update the batch classification in the bom

hi,
iam working a exit : exit_saplcoml_001.This exit is for material quantity calculation.the materials are currently classified in the material master under the classification tab.Ans due to this the classification becomes cross plant.
To make the material classification plant specific i have decided to maintain the classification in the batch classification of bom.i am finding for a function module r a bapi to update the calculated values in to the batch classification characteristics.please help mi with this.
thanks.

Hi
U can try to use BAPI_MATERIAL_SAVEREPLICA
Max

In MIGO, how to check if the batch numbers are the same.

Dear all,
in MIGO, when i try to transfer a material. how can i write some code to check if the batch number of From and Dest are the same?
Desmond

closed

Where is the batch description in the new Photo?

Where is the batch editing description and title we used in iPhoto? I did find how to edit description in a single image, but where is the batch? I really need it in my workflow, having to expor lots of photo's on a daily basis to external corporate systems, that sort on descriptions.

There was a post that discussed some ability to automate titles based on filenames:
Where are photo file names?
From that inspiration I wrote this little Applescript that will take all items selected, ask you for a description, and then apply it to all selected:
tell application "Photos"
activate
set imageSel to (get selection)
if imageSel is {} then
error "Please select an image."
else
set theAnswer to text returned of (display dialog "Title:" default answer "")
repeat with im in imageSel
-- set the name of im to theAnswer
set the description of im to theAnswer
end repeat
end if
end tell
you can see from the commented out line that you could do the titles (names) as batches the same way.
I haven't finished it out yet, but wanted to post it here to give you a start. I have tested it on a handful of items, so I know it at least works. You could save this as an app from within applescript editor, and then just run it after making a selection, or you could paste it into an automator action and tie it to the services menu as mentioned in the forum post above.
Photos luckily does seem to have applescript hooks for the following when dealing with a "media item" - looks like you can add/edit most of the metdadata you have access to in the GUI. I initially missed this when I looked, so was very glad to see the forum post that pointed me in the right direction.
Property
Access
Type
Description
altitude
get
real
The GPS altitude in meters.
date
get/set
date
The date of the media item
description
get/set
text
A description of the media item.
favorite
get/set
boolean
Whether the media item has been favorited.
filename
get
text
The name of the file on disk.
height
get
integer
The height of the media item in pixels.
id
get
text
The unique ID of the media item
keywords
get/set
list of text
A list of keywords to associate with a media item
location
get
list of real
The GPS latitude and longitude, in an ordered list of 2 numbers. Latitude in range -90.0 to 90.0, longitude in range -180.0 to 180.0.
name
get/set
text
The name (title) of the media item.
width
get
integer
The width of the media item in pixels.

Is possible Block the batch stock in the run MRP

Similar Messages

Maybe you are looking for