Is possible to add 2 conditions in a view that is used from an extractor?

Hi alls.. that´s my question:
Is possible to add 2 conditions in a view that is used from an extractor?
I have an extrator in R/3 that´s a table view, so i want that this filter from 2 differents fields when this has the same value.
For example:
filter when FIELD1 = ZZ or when FIELD2 = ZZ .
..different fields, but the same type of data and value!
is it possible?
When i trying to activate the view, then show me an error that this is impossible to do.
Help me..please!!!
TY

The error is :
Only be able to 'OR' connects for the same fields.
You are trying to connect with 'OR' select conditions from differents fields.
(sorry but the sistem is in another language ---> not english)

Similar Messages

Is the "Juke Box View" that I used on my music in the I-Phone 4 not available on the I-Phone 5S?

Is the "Juke Box View" that I used on my music in the i-Phone 4 not available for the i-Phone 5S?

Hi Jerry165,
I apologize, I'm a bit unclear on the exact view that you are describing. If you are looking for more information on the view options available for Music in iOS 7, you may find the Music section of the following document helpful (pg. 60):
iPhone User Guide For iOS 7.1 Software
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Regards,
- Brenden

Is it possible to add markups to a PDF that I am not the author of

Most of the PDFs I generate are from other applications (like Autocad) where I "print to PDF" to create the file.   Most of the PDFs I recevie are generated the same way.   Prior to Acrobat Reader 8, it was simple for me and my collueges to exchange information on these PDFs by using markup tools and resending them with markups.   Since Acrobat 8 has come along, I now find it impossible to markup a drawing (no matter if I have created it using Print to PDF or if someone has sent it to me). I went to the knowledge base and see that the drawing has to be enabled for markup in one of 2 ways
In an open PDF, choose Comments > Enable For Commenting In Adobe Reader, and then save the PDF.
Start the wizard to initiate a shared review or an email-based review and follow the on-screen instructions. When you’re finished, commenting is enabled in the PDF that you specify for the review.
Well, there is no Comments selection in my toolbar.   Second method is given by
Quickstart: Start an email review
An email-based review lets you track review status and merge received comments into the PDF.
Click Review & Comment and choose Attach For Email Review.
If prompted, enter your identity information to create a reviewer profile.
Follow the on-screen instructions to select the PDF, invite reviewers, and send the email invitation.
If your email application doesn’t send email automatically, you may need to answer alert messages and switch to your email application to finish sending the message
But there is no Review & Comment button to click.
So, can someone tell me, can I still do a simple markup of any PDF?   Even if I have to jump through hoops can I?    I guess I can understand Why Adobe has done away with this feature in their free tool, as they were not getting any revenue off of it, but it greatly diminishes the usefulness of Acrobat Reader and therefore all PDFs for me.
Thanks in advance for your response.

To enable this right you need Acrobat, not the free Reader.
However, starting from Reader X it is possible to add simple markups to any file, unless it has been specifically disallowed by the creator of the file.

Is it possible to add text to a non-fillable form using Reader DC?

TLDR: Can I add text to a form (e.g., fill it out) using Adobe Reader DC on Windows, or can that only be done with "fillable" forms? If so, how?
I'm attempting to fill out a fairly lengthy "paper" form. The form is not a fillable form, it is a government form that is downloadable for printing but for whatever reason the government agency chose not to enable the "fillable" feature.
On my Mac, I can just use the "text box" tool in the Preview app to add all of the text that I need to complete this form.
On Adobe Reader DC, which is installed on my Work PC running Windows 8, nothing happens when I click the "fill and sign" button and the features displayed in the online tutorial simply don't show up. There's no text tool. I just see the "hand" icon. When I right-click, I get an option for the Select tool, which enables me to select text, but doesn't allow me to add a text box. The web tutorial says there should be a menu somewhere with an icon to add a text box, but that icon is just straight up missing.
I am very confused by this software. I am not an idiot with computers; but I am a bit old, and I'm more used to keyboards, toolbars, and windows than this "pane" based touch-oriented approach. The toolbar up top seems to be limited to a "pane selector" between Home, Tools (which just reveals a panel of icons most of which are links to cloud services that I don't want), an then a few file handling icons. On the right there is a little panel that says "get started" and offers only two clickable functions, "Send & Track" and "Get Others to Sign" neither of which reveals any text tools.
Now, the answer to my question very well may be "no" which is fine, I'll just keep using my Mac for the task since I know that it works, but I'd really like to be able to leave my personal computer and get everything done within Windows. Surely this isn't one of those things that can only be done on a Mac or with expensive third-party software on a PC. But the web seems to insist that this is a thing that should be both possible and simple. Is it?

You can try the comments tools.

How to add table Z to infoset that is using PNP or PNPCE

hello my friends... i thing that the subject explains my situation... i want to add a Z table to infoset that is using PNP or PNPCE database, then i want to use the fields of Z table to selection criteria
regards and thanks in advance
Mário

Hi Mario,
As you go to GOTO - Global Properties while maintaining the infoset, you will realize that an infoset can either have a logical database or table join-not both at the same time-.
However, in your case, you can use References - Text field for respective fields in field group.
If it is a custom infotype, you can directly relate the text table to the domain of the data element of the infotype field.
-Please check IT0002 Country of birth as reference-
Regards,
Dilek

Is it possible to add a "Thank you for your submission" using Adobe Muse Forms

Instead of the form resetting I was wondering if it were possible for a message to appear.
Sometimes the words Form Received appear next to the Submit button, can this be edited?
Penny

Hi Penny,
You have a couple options:
1 - You can indeed edit the text that appears next to the button using the states panel and then just edit the text.
2 - If you need to add more info that such as going to a full thank you page with perhaps a download or some other information; you can select another page to be redirected to after submitting in the form properties panel.

Is it possible to add code to a button that would save the form as a jpeg file?

Hi,
I currently use pdf forms to create records for the work I do, these end up being 5-8MB large and not much smaller when 'flattened'. I currently use a 3rd party app to convert them to jpeg before uploading them to dropbox for the clients. Is there a way to create code that i could add to a button which would save the pdf as a jpeg file?

Hi,
The PDF forms are large because they include a large diagram which I then elaborate on with the drawing tools. I actually use acrobat to make and edit the form but PDF Expert on my iPad to edit them etc sorry probably should have clarified that. It is a single page however with form field and the diagram. I also attach a picture to the file before opening it in an app to convert to jpeg and then sending it back to pdf expert.
The save as button only allows me to save it as a flattened or original document within PDF Experts guidelines hence why i was wondering if there was someway to curcumvent that and save it as a jpeg directly, somehow integrating the other app with the pdf expert programm t stop me having to switch between the two.
The more I write the more I see how impossible this might be apologies for my ignorance if so.

Is it possible to add a Filmratings like PG or R using template made in FCP

I want to know if FCP has a prebuilt film ratings template we can use?

Obviously since you cannot pretend you have an official rating . . but may on the other hand want to give end viewers some warning as to content . . you could make your own ratings system.
In other words if its a horror give it a "hiding behind the couch" rating if it has adult themes give it a "blush factor" . . . . etc

Howto add user role in OID for PORTAL use from wihtin SSO SERVER plugin

Hi all,
Can someone help me with this issue:
I'm developing a custom authentication module for SSO Server. From this plugin I would like to set the roles/groups to which that user belongs, before the redirect to the Portal is done.
I'm adding the user attributes to the OID via the DirContext.modifyAttributes(..) method from within the plugin. However I don't know how to add the roles/group definition to the user entry in the OID so that Oracle Portal can show a personalized desktop when the user logs on.
Hope someone can point me in the right direction.
Many thanks in advance!
Kind regards,
Chris

Chris ,
Do you know how to get user role in OID? Did you fix this issue. i have same job in this point.
Thanks

HT203428 Is it possible to read the distorted text message that I received from someone?

It was a message from the carrier T-Mobile to the carrier Airtel (which is the network I use). The message has imcomprehensible characters. Is there a way to read them, how do I change them to normal ASCII format?

no, but there are 3rd party software solutions that can probably do this for you. try google.

Is it possible to configure TimeMachine in a manner, that it use only ethernet for backup?

i have Airport and ethernet connections but if TimeMachine starts it use Airport instead of the 1GBit EThernet Connection...
thx for replies
frank

You should make sure that the disk you want to use for TM backup is not connected to Wireless also, then assign it in TM prefs.

I installed an update to firefox yesterday and it wiped out the photo viewer that I USE everyday for my real estate listings.. How do I get it back

I cannot remember what it was called.. but I seriously cannot work my real estate business without it. All my listings have photos and I cannot see them now.
Help

The easiest solution would be to use your backup, if you don't have one you have no one to blame but yourself.
If you also lost your extensions, preferences, and history, perhaps you created a new profile and are in the wrong one. Find out if you have multiple profiles and check the date-timestamps on places.sqlite or the files with bookmarkbackups folder Your current profile can be located typing about:support into the location bar then click on "Open Containing Folder" which places you in your current profile now go up one level to your "Profiles" folder to see if you have other profiles as well.
If you are in the correct profile see if you have a bookmark backup that you can restore in your current profile. Mozilla will create 5 or 10 backups (one per day of use) the number of backups can be changed they were increased from 5 to 10 (but that won't help now, you have what you have). Use "Ctrl+Shift+B" to get to the Bookmarks Library List then "Import and Backup" menu then "Restore" if you see a list of several days and on the day before your problem you might use that or even the day of the problem to restore your bookmarks. If available easier than using your own backup and is done with Firefox up -- but is not a substitution for the need to back up your user files to an external device.
There may be a bookmarks.html file in your profile but it is probably way too old to do you much good.
<br><small>Once you resolve the problem, mark "Solved" one answer that will best help others with a similar problem, and let us know what the resolution was.</small>

Is It Possible to add the Actual Quicktime player to a page?

Does anyone know if it is possible to add the actual quicktime player that you see on your desktop to a page? I want to add a Quicktime movie to a page and still end up with the whole controller not just the little control bar.

Kyn's response is also your answer.
To open the QuickTime Player (instead of playing your file in a browser window) is a feature of iWeb that is "missing". Maybe next version?
I use the special html "tags" in many of my .Mac hosted Web pages:
http://homepage.mac.com/kkirkster/04war/
As an example.
You need to edit the iWeb created page code after publishing to do this work. It may be more work than you've planned because it does require a lot of "hand coding" to your "Published" HTML page code. And, because iWeb also uses special javascripts (.js files) to showcase your QuickTime file, you'll need to hand edit them also.
There is some freeware software (PAGEot) that can help a bit with the page coding. A Google search for it is easy.
Editing "published" pages is not for the faint of heart and may be necessary each time your iWeb site is updated.
Does this answer your personal email to me?
We can show you the steps when you're ready to implement them.

Is it possible to add a user in Win NT using Java?

Hi,
Is it possible to add a new user to Win NT using Java, assuming that the user running the application is an administrator?
If it can't be done in Java, can anyone point me in the right direction to research this?
I appreciate your help.
Regards,
Liam.

Okay, I might have a solution already.
I'm going to try using JIntegra from www.linar.com as a COM bridge, to access the Win32 API function NetAddUser.
Regards,
Liam.

Is it possible to add tooltip when using REUSE_ALV_GRID_DISPLAY

All,
Is it possible to add tool-tip when using REUSE_ALV_GRID_DISPLAY. I am using
i_fieldcat_alv TYPE slis_t_fieldcat_alv.
slis_t_fieldcat_alv does not have a tool tip option.
Your earlier response is much appreciated.
Regards
Kasi

Looks like it is NOT possible to add our own text for tooltip when using REUSE_ALV_GRID_DISPLAY.
See attached thread
Re: quickinfo in ALV

Is possible to add 2 conditions in a view that is used from an extractor?

Similar Messages

Maybe you are looking for