Is possible to avoid requester have to accept after a partial rejection?

Hi,
We are in SRM 4 SP10.
We'd like that after a partial rejection, the accepted items continue in the workflow. I mean not workitem receive for the requester.
BBP_WFL_SECURITY is high.
could BBP_WFL_EMPL_WI_BADI be the solution??
Thanks
Regards

Hi Jorge,
Try to use BBP_WFL_SECUR_BADI.
You can use this BADI to determine whether:
- a SC can be changed during approval process
- the approval WF restarts when changes are made to the document
- a reviewer/approver can be added or changed
- these are the call scenarios (see import parameter SCENARIO).
You use this BAdI to overwrite the settings for the authorization level of approver
Regards,
Marcin Gajewski

Similar Messages

Expense request getting errored out after Expense approver rejected

Dear Experts,
I am facing issues where employee expense request is getting errored out when the expenses approver reject the Request.
We are using a workflow to move this request.
Once the employee submitted the expense request. We are having 2 level approval of his/her. Supervisor at the 1st and Expense approver at 2nd level
In the 2nd phase the Expense approver rejecting the travel request to make modifications, however the rejected request is NOT routing back to the employee.
Any assistance highly appreciated

Hi Venkat,
Many thanks for your reply
The required work flow is properly configured. I can see after rejection it has been routed to the employee again.
However after rejection its getting errored out, any idea on the possible reasons, does er approver is selecting or inputing any incorrect parameters.
Regards,
Tamiz

TA38633 is it possible to avoid having to do a "restore" entirely ? Also if i have to do a restore, i have windows 7- do i follow the steps for Windows XP?

Regarding error 1601 - is it possible to avoid having to do a "restore" entirely ?
Also if i have to do a restore, i have windows 7- do i follow the steps for Windows XP?
Many thanks

I'd refer to this
http://support.apple.com/kb/TS3694 (talks about security software and this error)
and this
http://support.apple.com/kb/HT1414
I've had Windows 7 for a while, but it seems the steps in iTunes are identical.

I use photoshop 6 (mac) if I subscribe to Premier CC do I have to subscribe to Photoshop CC also I want to use 6 as long as possible to avoid the subscriptions fees

I use photoshop 6 (mac) if I subscribe to Premier CC do I have to subscribe to Photoshop CC also I want to use 6 as long as possible to avoid the subscriptions fees

Completely separate products, so nothing to fear.
Mylenium

Sql developer 3.0: could be possible to avoid creating connections

Hi, when connecting from oracle forms, you don't have to create a connection, in the same way I don't know if could be possible to avoid creating connections when you are using a tnsnames.ora archive.
simple to choose the connection as in oracle forms, and the posibility to save the password.
thank you

As stated in the forum announcement, you can request this at the SQL Developer Exchange, so other users can vote and add weight for possible future implementation.
Regards,
K.

In RSRT - Is it possible to check request wise data in RSRT only.

Hi,
In RSRT - Is it possible to check request wise data in RSRT only.
Kindly advise me on the same.
Thanks
Bujji

Saveen,
Here is my problem.
I have a infocube in which Material No and Base Unit are there.
I have a DSO in which Material, (Alternate unit, Numerator and Denominator) which are associated to that material are there .
I need to match the same material number from both infocube and DSO and load the associated Alternate unit, Numerator and denominator in the infocube.
Since the infocube is non cumulative, I am not able to build Infoset.
So I added the Infoobjects of (Alternate unit, Numerator and Denominator) to the cube.
Now the cube has Material no, base unit-------For Both data is filled.
and extra Alt unit, Numerator and Denominator- For these data empty.
I need to load the alt unit Numerator and denominator from the DSO for which the Material no matches with the Infocube.
I am not very good in explanation.Hope u understand. Pls adjust with the long text...
Pls help me.
Thanks.
Guru

Encore CS6 not possible to avoid transcoding

Why does encore CS6 transcode some H.264 streams and some not? They are different sequences exported from the same project with the same settings out of premiere CS6. The parameters of all streams equal the settings in encore. But for some it is not possible to change the setting in encore to not transcode.

Yes, I used H.264 Bluray 1440x1080 anamorph. I guess Encore ignored the anamorph flag for some files and transcoded them a second time to 1440x1080 - the result is a visible frame with a distorted 4:3 aspect ratio. I have found a resolution. I replaced the transcoded files in the encore transcode folder with copies of the original files and renamed them like the transcoded files: "original filename"_sessionFiles_Asf_session_1_video.m4v
Perhaps its possible to avoid transcoding by simply placing renamed copies (in that name system above) of the original files in the transcode folder. I will try it in the future.

I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable

I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable and request to connect to itunes and no activate.

4 possible causes of that message:
1] Activation server is actually down. Very rare occurrence, but it does happen.
When it does occur, down time is very short. Solution - try again.
2] Your firewall or antivirus are blocking the connection. Solution - temporarily
deactivate your firewall or antivirus until the update completes.
3] Computer being used for the activation has previously been used to jailbreak
an iOS device. Solution - use a computer that has not been used to jailbreak an
iOs device.
4] Your iPhone is jailbroken. Google may provide some direction. Be advised the jailbreak
may have made changes that will prevent the iPhone from successfully activating.
Terms of Use for this forum prohibit discussion of jailbroken iPhones.

Is it possible in IOS to have two static routes for the same subnet, one a higher priority and "failover" between the 2?

Hi All
Is it possible in IOS to have for a particular subnet:
a) Two static routes?
b) Make one static route a higher priority than the other?
c) If one static router "goes down", failover to the lower priority static route?
We have a l2tp/vpdn connection to a supplier which can be accessed via two vlans/routes. I would like to make one route the preferred one but the "route" to failover if the preferred route goes down.
Again, many thanks in advance for all responses!
Thanks
John

Hi John,
Hope the below explaination will help you...
R1(config)# ip route 0.0.0.0 0.0.0.0 2.2.2.2
R1(config)# ip route 0.0.0.0 0.0.0.0 3.3.3.3 10
If you notice the Administrative Distance for the secondary route pointing to ISP2 is increased to 10 so that it becomes the backup link.
The above configuration with just two floating static routes partially accomplishes our requirement as it will work only in the scenario where the routers interfaces connected to the WAN link are in up/down or down/down status. But in a lot of situations we see that even though the links remain up but we are not able to reach the gateway, this usually happens when the issue is at the ISP side.
In such scenarios, IP SLAs becomes an engineer's best friend. With around six additional IOS commands we can have a more reliable automatic failover environment.
Using IP SLA the Cisco IOS gets the ability to use Internet Control Message Protocol (ICMP) pings to identify when a WAN link goes down at the remote end and hence allows the initiation of a backup connection from an alternative port. The Reliable Static Routing Backup using Object Tracking feature can ensure reliable backup in the case of several catastrophic events, such as Internet circuit failure or peer device failure.
IP SLA is configured to ping a target, such as a publicly routable IP address or a target inside the corporate network or your next-hop IP on the ISP's router. The pings are routed from the primary interface only. Following a sample configuration of IP SLA to generate icmp ping targeted at the ISP1s next-hop IP.
R1(config)# ip sla 1
R1(config)# icmp-echo 2.2.2.2 source-interface FastEthernet0/0
R1(config)# timeout 1000
R1(config)# threshold 2
R1(config)# frequency 3
R1(config)# ip sla schedule 1 life forever start-time now
The above configuration defines and starts an IP SLA probe.
The ICMP Echo probe sends an ICMP Echo packet to next-hop IP 2.2.2.2 every 3 seconds, as defined by the “frequency” parameter.
Timeout sets the amount of time (in milliseconds) for which the Cisco IOS IP SLAs operation waits for a response from its request packet.
Threshold sets the rising threshold that generates a reaction event and stores history information for the Cisco IOS IP SLAs operation.
After defining the IP SLA operation our next step is to define an object that tracks the SLA probe. This can be accomplished by using the IOS Track Object as shown below:
R1(config)# track 1 ip sla 1 reachability
The above command will track the state of the IP SLA operation. If there are no ping responses from the next-hop IP the track will go down and it will come up when the ip sla operation starts receiving ping response.
To verify the track status use the use the “show track” command as shown below:
R1# show track
Track 1
IP SLA 1 reachability
Reachability is Down
1 change, last change 00:03:19
Latest operation return code: Unknown
The above output shows that the track status is down. Every IP SLAs operation maintains an operation return-code value. This return code is interpreted by the tracking process. The return code may return OK, OverThreshold, and several other return codes.
Different operations may have different return-code values, so only values common to all operation types are used. The below table shows the track states as per the IP SLA return code.
Tracking
Return Code
Track State
Reachability
OK or over threshold
(all other return codes)
Up
Down
The Last step in the IP SLA Reliable Static Route configuration is to add the “track” statement to the default routes pointing to the ISP routers as shown below:
R1(config)# ip route 0.0.0.0 0.0.0.0 2.2.2.2 track 1
R1(config)# ip route 0.0.0.0 0.0.0.0 3.3.3.3 10
The track number keyword and argument combination specifies that the static route will be installed only if the state of the configured track object is up. Hence if the track status is down the secondary route will be used to forward all the traffic.
Please rate the helpfull posts.
Regards,
Naidu.

I've got Photoshop Elements 11 on my mac-book Now I want to copy the programm to my Mac Pro too. Is it possible or do I have to buy another license?

I've got Photoshop Elements 11 on my mac-book Now I want to copy the programm to my Mac Pro too.
Is it possible or do I have to buy another license?

Thx a lot, Barbara!
Your answer helped me to install the program to my Mac Pro
You made my day!
I wanted to give You points, but I am new in the forum and I am not quiet sure how to do it.
Salute
Erwin
Am 02.10.2014 um 17:37 schrieb Barbara B. <[email protected]>:
I've got Photoshop Elements 11 on my mac-book Now I want to copy the programm to my Mac Pro too. Is it possible or do I have to buy another license?
created by Barbara B. in Photoshop Elements - View the full discussion
You're allowed to have it installed and activated on two computers at once but you can never copy an installed copy of PSE. You need to install it from scratch on the Mac Pro. If you need the file, you can download it here:
Download Photoshop Elements products | 12, 11, 10
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6784746#6784746
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Is it possible to transport requests to 2 QA clients with ChaRM?

Hi
If there are 2 QA clients and requests need to be tranported to both clients at the same time,
can SolMan ChaRM handle this?
Transport route is as follows.
DEV_______QA_______PRD
200___->__300___->_100
______--->__500
Anybody has experience?
My version is SolMan 7.0 SP16
Thank you

hello,
I have the same behaviour in my landscape. Only the systems in the main path is available in SDHF task list
I would say this is normal.
Why is this normal ?
Because the ur.gent correction is to be considered like an emergency process that doesn't superseed the normal maintenance but that complement it to have a faster change in place.
That means the ur.gent transport will follow the normal maintance process anyway
If you miss the ur.gent transport in the other QA client you may schedule the following task in your project tasklist
/TMWFLOW/SCMA_BTCH_SYNC_TEST or online
/TMWFLOW/SCMA_TRIMP_SYNC_TEST
This is not obvious how this is working and I am currently evaluating this solution in another thread
[Is it possible to transport requests to 2 QA clients with ChaRM?|Is it possible to transport requests to 2 QA clients with ChaRM?]
on your side you may also want to evaluate this tasks ?
br
Xavier

Some or all of the samples requested have not yet been acquired?

Hi,
I'm running the labview codes (8.5) on Mac platform. The Daq part number is USB-6211. Here are more details:
Mode: differential, continuous sample
Samples per channel: 250,000
Sample rate: 250 kHz
Channel: A1, A9
The data acquisition goes well in the first hour and suddenly it shows error-200284, Some or all of the samples requested have not yet been acquired. The timeout is much higher than samples / sample rate, which is 100 s. Is anyone can help me with this? I attached the labview codes.
Attachments:
Screen Shot 2012-10-31 at 6.20.22 PM.png ‏265 KB

1. As said, you should not be using the Run Continuously button. Use a while loop to acquire your data. Setup the task before the loop and close it out after the loop.
2. When you have the while loop, put a wait in there (1 second might be good). This will help avoid the timeout issue.
3. Propagate your errors. Have the while loop stop on the error or your stop button. Use the Simple Error Handler at the end.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Invited to a repeating event - have to accept EACH time!

I have been invited to an event that happens five days a week (i.e. the weekdays). For some reason I have to accept each occurrence and I have never had the option to just accept all. This is getting pretty frustrating and time-consuming. How do I just accept all?
Thanks!

Greetings Sarah,
It sounds like the sender of the event is sending you 1 invite per occurrence rather than sending you a single event which is set to repeat. If the event was set to repeat you would only be prompted one time to accept.
Here is how you can tell:
If the invite shows a unique date for each and every invitation, then they are in fact sending you a single invite for each and every event.
--- If this is what you see then you need to contact the sender of the event and request that they set their event to repeat, rather than making multiple unique events. iCal does not have an "accept-all" button (which would be a very bad thing if you had a list of 20 invites and hit this hypothetical button by mistake).
If the invite shows the same date over and over (March 3rd, March 3rd, March 3rd, etc.) then something is wrong with iCal.
--- Reply back and we can suggest steps to take.
Hope that helps.

Ungatewayed portlet requests have no portal settings

Hello,
I'm getting the following error when hitting search to search in our staff directory. Anyone know what's going on?
Ungatewayed portlet requests have no portal settings.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Plumtree.Remote.Portlet.NotGatewayedException: Ungatewayed portlet requests have no portal settings.
Source Error:
Line 48: context = PortletContextFactory.CreatePortletContext(HttpContext.Current.Request, HttpContext.Current.Response)
Line 49: groupID = CInt(context.GetRequest.GetSettingValue(SettingType.Admin, GROUPNAME))
Source File: xxxxxxxx\AppPage.vb Line: 49
Stack Trace:
[NotGatewayedException: Ungatewayed portlet requests have no portal settings.]
Plumtree.Remote.Portlet.PortletRequestWrapper.GetSettingValue(SettingType type, String name) +204
xxx.PTL.StaffDirectory.Web.AppPage.isAdmin() in xxxxxx\xxx.PTL.StaffDirectory.Web\AppPage.vb:49
xxx.PTL.StaffDirectory.Web.StaffSearch.AddIncludeTerminatedRow(Int32 controlIndex) in xxxxxxxx\StaffSearch.aspx.vb:285
xxx.PTL.StaffDirectory.Web.StaffSearch.LoadLOVs() in xxxxxxxx\StaffSearch.aspx.vb:188
xxx.PTL.StaffDirectory.Web.StaffSearch.Page_Load(Object sender, EventArgs e) in xxxxxxxx\StaffSearch.aspx.vb:76
System.EventHandler.Invoke(Object sender, EventArgs e) +0
System.Web.UI.Control.OnLoad(EventArgs e) +127
System.Web.UI.Control.LoadRecursive() +92
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3360
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3614

Hello and thank you for your response. This is a custom application through a remote portlet. It is a popup window where this error occurs. The weird thing is that it works on another server but not this particular one where I need to get it working on.
The Gateway URL Prefixes are all set to the application server. I'm sure that this is correct as it is working like this on our production environment. The difference is that the app was .NET 1.1 on Portal 6.1 and now it is .NET 2.0 on Portal 10.3.
Is it possible that something was missed during the Portal upgrade to 10.3? If yes, do you have any idea what it could be?

Can't open my photo library after upgrading to iPhoto 11. is it possible to load iPhoto 9.0.1 after loading 11? have followed all other instructions but it still won't let me open iPhoto.

can't open my photo library after upgrading to iphoto 11. Is it possible to download iphoto 9.0.1 after installing '11. Have followed all the other instructions and am in a loop which doesn't allow me to access iphoto or my photos.

when iphoto wouldnt open we read the trouble shooting info and it said that we may have needed to download 9.0.1 if we had an older version. We obviously didn't download it before the upgrade and wondered if it would cause problems or indeed solve the problem if we downloaded it now!
When we try to open iphoto is says:
To open your library with this version of iphoto it first needs to be prepared
To prepare the library use the iphoto library upgrader available from Apple.
We have downloaded this twice now and it still sends us this message when we try to open iphoto.

Is possible to avoid requester have to accept after a partial rejection?

Similar Messages

Maybe you are looking for