Is possible to connect a Remote Ressource with Windows Phone 8.1 ?

I am trying to connect the my mobile with Windows Phone 8.1 with a remote ressource (and not remote PC). The address is something like "https://xxx.xxxx.xx/...". This connection is possible wiith Androïd and Mac. Here I don't fond it.

Hi,
Current versions of Microsoft Remote Desktop Preview for Windows Phone 8.1 do not support connecting to Remote Resources. I will help to forward your concern to the product group.
Best Regards.
Jeremy Wu
TechNet Community Support

Similar Messages

  • It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?

    It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?
    I was using "remote" with a D-link modem, that works fine at my iPad. But now I´m using only the cell phone as modem 3G, and don´t want to intall a router to put new cables at my notebook.

    What?
    You want to control iTunes on your computer using the Remote app on your iPad?
    And you want to connect the iPad and computer through your Nokia?
    No, this will not work.
    Just create a network with your notebook.

  • It is possible to connect iphone 3G syncing with 2 apple machine?

    1. It is possible to connect iphone 3G syncing with 2 apple machine (1 imac which i using in home lower version &
    MacPro5,1 is i am using in office.) Please let know in which i can both the machine.
    2. And i not able to install any apps in which is compatability with iphone ios 4.2 ver.
    It says some error.
    Thanks & Regards
    JS

    By design, the iPhone syncs or manually manages iTunes content with ONE computer at a time. Thus, it is not possible to do what you want. You need to pick one computer & stick with that computer.
    You are correct, the iPhone 3G cannot be updated past iOS 4.2.1...the end of the line for that model iPhone. Thus, any apps that require a higher iOS version will not install or run on your phone.

  • Is possible to connect two i-phone4 with bluetooth?

    Is possible to connect two i-phone4 with bluetooth?

    For what reason.  Some apps were made to interact with another iPhone with the same app running over bluetooth.
    All info is in the manual if you mean for other reasons.
    http://manuals.apple.com

  • I am connected to the computer with my phone and it says there are 0 photos to import, however I have over 200 on my phone to import. I am trying to figure out why they aren't showing up.

    I am connected to the computer with my phone and it says there are 0 photos to import, however I have over 200 on my phone to import. I am trying to figure out how to get itunes to recognize the photos on my phone. This has never happened before.

    Have you tried to reset the iPhone and tried again to import?
    To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.

  • Hp Aio Remote Beta for Windows Phone 8.1

    Having installed this app on a Lumia 520 to integrate with a 5520,  I find that documents in my phone's 'documents' folder are not apparent to the app, hence they cannot be printed. This applies equally to 'documents' folder both on the phone and sd card. Appears lots of users are having this issue, is there a fix please?

    I have an issue with Windows phone though, that's why I'm using Android. Have you checked this webpage yet? http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c04387822&lc=en&jumpid=reg_r1002_us...
    Check on the FAQs on the App..

  • Error Integrating EWS 2.2 with Windows Phone 8.1 App

    Hi,
    I am new to Windows Phone development. I have a basic need to access the Exchange Calendar.
    I am using Windows Phone 8.1 SDK and Exchange Web Service 2.2 SDK.
    As a first step I tried to use the
    Microsoft.Exchange.WebServices.Autodiscover
    dll to find the end points of the Exchange Server.
    However on the first code statement
    Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService
    service = new
    AutodiscoverService();
    It throws an exception –
    An exception of type 'System.IO.FileNotFoundException' occurred in Microsoft.Exchange.WebServices.DLL but was not handled in user code
    'System.IO.FileNotFoundException' occurred in mscorlib.ni.dll
    I further tried some debugging and using Code Analyser I get following warnings –
    Microsoft.Exchange.WebServices.dll: warning CS1684: Reference to type 'System.Net.IPAddress' claims it is defined in 'c:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\WindowsPhoneApp\v8.1\System.dll',
    but it could not be found.
    And
    C:\Program Files\Microsoft\Exchange\Web Services\2.2\Microsoft.Exchange.WebServices.Auth.dll: warning MSB3817: The assembly "C:\Program Files\Microsoft\Exchange\Web Services\2.2\Microsoft.Exchange.WebServices.Auth.dll"
    does not have a NeutralResourcesLanguageAttribute on it. To be used in an app package, portable libraries must define a NeutralResourcesLanguageAttribute on their main assembly (ie, the one containing code, not a satellite assembly).
    I am not sure what the issue is, but when I try the same code it works in a Command Application. There are other errors but not the above ones. It at least executes few statements.
    Can someone please help resolve this error and point me to links where I can find sample code with Windows Phone 8.1 implementation?
    Thanks in Advance
    Nasir

    The EWS SDK 2.2 is a regular Desktop .Net DLL and therefore won't work in a WinRT App (CoreCLR). You should however be able to call the WebService directly.

  • Lumia 920 does not sync with Windows Phone for Mac

    I cannot sync any item between my Lumia 920 and with Mac.
    Many users indicated that the problem encountered when syncing the Lumia 920 with Windows Phone for Mac is resolved by using the option "Allow access to folder" to the iTunes library. However, I have tried several times with many folders but cannot sync anything between my phone and my Mac.
    I also modified the security options of my Mac by allowing the Windows Phone app to access my computer but with not success.
    Any suggestions?
    Thanks
    Solved!
    Go to Solution.

    Hi mate,
    As of yet, this appears to be an unresolved issue, but as this is a user to user forum only for Nokia products and services, you will need to contact Microsoft directly.
    You can do this by the link below:
    http://windowsphone.uservoice.com

  • SBH-52 with Windows Phone 8

    Hello Everyone!
    I just bought a Sony SBH52.
    I would like to use it with my Lumia 1520. But it appears that the SBH52 works only with Android!!!
    Does it exist a way to make SBH52 worked with a Windows Phone 8 ??
    Thank you very much for your help!!

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    It should work just as any Bluetooth headset to any device but you'll miss out on the special features if you don't have a Android device.
    No tests have been made with Windows phones I believe so I can't promise any functionality. But perhaps you could tell us more about the problem you run into?
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Can't Connect to Remote Server with DW CS6?

    In the last couple of days I'm having trouble connecting to my website host server (IPower) via Dreamweaver CS6.
    I've been using this program and setup for several years but this weekend it takes 4 times longer to try and connect and ends up cancelling the operation usually.
    Sometimes it connects for a few seconds then I get an error message: "the connection to the remote host has been lost."
    Just wondering if this issue is Hughes ISP related. I tried disabling web acceleration with the same result. All other web and email operations are working fine.
    A colleague with cable internet connects to my host with Dreamweaver with no problems.
    Any ideas? Thanks in advance, John

    It could also be a local hardware issue.
    I had a wireless router that went belly up once in a very odd manner. I could connect and see the files on my FTP server, but uploads wouldn't work. I connected the computer directly to the modem, bypassing the router all together, and everything worked fine.
    It's something to check before you call your ISP and start sending them off on a possible wild goose chase.

  • Deploying unity connection at remote site with CUCM at central site

    I am planning to deploy Unity connection at remote site while the CUCM is at central site only. Will appreciate of someone can shd some light on this, has anyone already deplyed same scenario , any specific requirements to take care of please ?
    Thanks in advnace,
    AB

    AB,
    Yes, having your Unity Connection server at a different location than your CUCM is supported.  
    I cannot really help you with specifc requirements as it largely depends on exactly how you intend to deploy it and what features you intend to enable.  Clustering, Digital Networking, Unified Inbox, etc.. all have their own additional requirements the whole of which would not fit into a message board post.
    However, specific bandwidth and latency requirements are listed in the "System Requirements for Cisco Unity Connection Release 8.X.   http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html
    The SRND and the System Requirements should get you on the  right  track.  I would encourage you to read both documents fully and  then  come back with any specific design questions you may have.
    -Steven

  • Connect to remote jmx with password

    Hello,
    now I�ve a problem to connect a remote jmx server with passord authentification. No idea why it does not work, here my configuration:
    jmxremote.password:
    ================
    # or specify another, less accessible file in the management config file
    # as described above.
    # Following are two commented-out entries. The "measureRole" role has
    # password "QED". The "controlRole" role has password "R&D".
    test test1
    jmxremote.access
    ================
    # Default access control entries:
    # o The "monitorRole" role has readonly access.
    # o The "controlRole" role has readwrite access.
    test readwrite
    This are my sys parameter:
    JAVA_OPTS="$JAVA_OPTS -Dcom.sun.management.jmxremote.port=9004"
    JAVA_OPTS="$JAVA_OPTS -Dcom.sun.management.jmxremote.ssl=false"
    JAVA_OPTS="$JAVA_OPTS -Dcom.sun.management.jmxremote"
    JAVA_OPTS="$JAVA_OPTS -Dcom.sun.management.jmxremote.access.file=/home/tomcat/jmxremote.access"
    JAVA_OPTS="$JAVA_OPTS -Dcom.sun.management.jmxremote.password.file=/home/tomcat/jmxremote.password"
    The .access and .password file is on the correct place and there is no exception because of the file access rights. If I start the remote jconsole with -J-Djava.security.debug=all, this is the end:
    jar:
    jar: beginEntry com/sun/crypto/provider/SunJCE_i.class
    jar: Manifest Entry: com/sun/crypto/provider/SunJCE_i.class digest=SHA1
    jar: manifest d462e6ef45ec12081028cd7ccf922cc2ec553358
    jar: computed d462e6ef45ec12081028cd7ccf922cc2ec553358
    jar:
    Cipher: Crypto Permission check failed
    Cipher: granted: (CryptoPermission * 128)
    Cipher: requesting: (CryptoPermission AES 256)
    I�ve found already a solution for that and connect with jconsole with the url service:jmx:rmi:///jndi/rmi://hostname:9004/jmxconsole
    Provider: Set SUN provider property [SecureRandom.SHA1PRNG ImplementedIn/Software]
    Provider: Set SUN provider property [CertificateFactory.X.509 ImplementedIn/Software]
    Provider: Set SUN provider property [KeyStore.JKS ImplementedIn/Software]
    Provider: Set SUN provider property [CertPathValidator.PKIX ImplementedIn/Software]
    Provider: Set SUN provider property [CertPathBuilder.PKIX ImplementedIn/Software]
    Provider: Set SUN provider property [CertStore.LDAP ImplementedIn/Software]
    Provider: Set SUN provider property [CertStore.Collection ImplementedIn/Software]
    Provider: Set SUN provider property [CertStore.com.sun.security.IndexedCollection ImplementedIn/Software]
    ProviderConfig: Loaded provider SUN version 1.6
    Although there is no exception I am unable to connect to the remote jmx server...
    Thx for any help!
    Cheers,
    Thilko
    Edited by: smilie79 on Jan 17, 2008 1:53 AM
    Edited by: smilie79 on Jan 21, 2008 2:51 AM

    Hi,
    You might need to specify explicitely -Dcom.sun.management.jmxremote.authenticate=true on the command line.
    Hope this helps,
    -- daniel
    http://blogs.sun.com/jmxetc

  • HT3500 Is it possible to connect via wi-fi a Windows 7 PC to a printer configured to print wirelessly using Macs?

    We have three Macs and a PC using Windows 7 in our family. While the three Mac users are able to print wirelessly to the printer using an Airport Express, I haven't been able to figure out how to connect the PC to the printer. The printer is simply not seen by the PC on the same network. Is it possible to connect both a PC and a Mac to the same printer using w-fi?

    http://support.apple.com/kb/DL999
    Download and run the installer from there (just like installing any other program on Windows). Windows systems require this to be installed and bizarrely it doesn't auto-install along with AirPort Utility.

  • Problem connecting wirelessly to TC with Windows computers

    This is not a new problem for me. I connect to my TC with ethernet. I connect with my ibook wirelessly with NO problem. However, I can't connect with an XP machine upstairs (great signal btw) Nor can my daughter connect via her new laptop with Vista (we had words about that purchase). I have my TC set up wep, via N (b g compatible). When we enter the password, all we get is an "connecting" that never connects. It sees the TC just fine, and reports it as wep and N configuration.
    Anyone have any ideas?

    Happy to help.
    I have an idea. Since you can "see" the wireless network from the PC it may be a password issue. Different companies do not use the same formula, or algorithm to be more more accurate, to generate the actual code when you enter your password.
    For example, when you entered your password for the Time Capsule in AirPort Utility, it was converted to a long complex code of numbers and letters using Apple's code generator.
    The PC manufacturer is probably not using the same algorithm, so although you are entering your "password" correctly, it is being changed to a different code which the Time Capsule interprets as incorrect and you get the log on error.
    Open AirPort Utility to the Wireless page again and click in the area where your password is shown as a series of dots (do not change anything, just click in the box). Now go click on the Base Station menu at the top of the screen and click on Equivalent Network Password. You will probably see a very long code.
    I think that this is the code,or password you will need to enter when you are trying to log on with the PC. Give it a try and post back on your findings.

  • Not able to connect SAP through internet with Windows 7 OS

    Hi,
    I am trying to use use latest version of SAP GUI 720 with Windows 7 Home Edition.
    When I am connecting through Local Area Connection I am able to connet to the sap servers.
    But when I am trying to connect through Internet with sap router string it displays error 
    """""hostname 'mypublicip/s/3299/w/solman' unknown
    Check your application server name
    Do you want to see the detailed error desciption?
    Yes/No """""
    With same router string I am able to connect to SAP server through internet on Windows XP pro.
    Does SAP router string needs some modification for Windows 7?
    Kindly help.
    With Best Regards,
    Rajkumar

    hi,
    Can you try to input the private ip address of the SAP router server instead of the public. Client should be connected in your network. 
    Thanks.
    newbie

Maybe you are looking for

  • How many computers can I have my Creative Cloud on?

    Hello, I just have a question. Since I use my Adobe programs for school and business. I have a Macbook Pro and an iMac that I have the creative cloud synced too. Im getting another Macbook Pro and was wondering if Id be able to sync that laptop with

  • Where is Expiry date & Rule that is triggered in CRMXIF_ORDER_SAVE_M

    Hi All, I am trying to troubleshoot an issue in the idoc CRMXIF_ORDER_SAVE_M. Segment name is E101CRMXIF_APPOINTMENT_XT under E101CRMXIF_BUSTRANS. 1st node should be populated with Expirydate. But it is populating the approve date. When I try to debu

  • WSRP File Upload with Struts

    Hello there I've been trying to integrate with WSRP a Struts 1.1 web app which provides a simple File Upload functionality. It works fine as a standalone web application (direct access to the web app). But I can't get it to work through WSRP from BEA

  • Installing Oracle Apex in a PDB

    Hi Guys, I just want to know when you install Apex in a PDB does the CDB and PDB have to have the same port number in order to access the Apex Admin page. I have the following set up: PDB1   Port - 5502   (With successful Apex install) CDB     Port -

  • Am I need to Eliminate the object after used??

    Am I need to Eliminate the object after used to release the resource ? Which like C code: free(Dynamic variable). And why and how they works in java?? Thank alot !!!