Is possible to have a time machine backup on an external hd connected to either a primary or secondary router and not have "back to my mac" using 10.7.3?

The bottom line is that Apple does not support Time Machine backups at the USB port of the AirPort Extreme. If they don't support their own router, they certainly don't support other routers from other manufacturers.
Connect the drive directly to the Mac using either USB or FireWire.....or....use a Time Capsule. Either of these setups will be supported.
If you want to try the unsupported method(s), you can certainly do so. But, I would suggest that you have a secondary backup plan in place if this is important data that you will be backing up.

Similar Messages

Cannot transfer Time Machine backups from one external drive to another

Since I bought my 13 inch MacBook Pro in September 2014 I've been keeping Time Machine backups on an external 1TB Lacie Rugged. This is partitioned into three and one of the partitions contains my iPhoto library.
Last weekend I left my MBP disconnected from the power source but with the external hard drive still plugged in. Long story short - the battery level fell below the minimum needed to operate so it turned itself off and 'disconnected' the external hard drive. This resulted in a corrupted iPhoto library which is no longer accessible.
In order to restore my iPhoto Library from another backup I needed to buy a second external hard drive. Yesterday I bought a 2TB Lacie Rugged which I've now partitioned into 5.
I want to move my Time Machine backups from the 1TB Lacie Rugged to a partition on the 2TB Lacie Rugged (to take advantage of the new Lacie's Thunderbolt connection).
I read the Apple article -
HT202380: Time Machine: How to transfer backups from the current backup drive to a new backup drive
and followed the instructions precisely. About 2 hours into the transfer I came back to my MacBook Pro and saw a message saying that it was not possible to complete the transfer because I did not have the correct permissions. The only option was to click the OK button which stopped the transfer.
Can anyone advise what I should do next?
Cheers
Tricia

Hi Eric,
Thank you for your response. I came across another thread yesterday which suggested the Restore via Disk Utility method. It worked for me, too. This was after I had tried following the method suggested in the Apple article above three times but each time the message was the same ....
The operation can't be completed because you don't have permission to access some of the items.
I dare say that Apple would like to have us believe that it's a simple matter of 'drag and drop' but it certainly wasn't for me. From what I've read the permission problem crops up fairly frequently. Before the second and third attempts I had already amended Permissions on the Time Machine backups so that everyone could read and write, so that mustn't have been the problem. I'm the only person who uses my computer so that's not a problem.
The next problem I have is that I decided I would use the Restore route to transfer my SuperDuper clone rather than start from scratch. Unfortunately, the partition size on my original backup disk where SuperDuper clone is is 350GB and the size of the SuperDuper clone partition on my new backup is 300GB.
Of course, Apple says you can resize partitions using Disk Utility. What they don't say is you can downsize partitions but (in my experience and that of many other frustrated users on various forums) you CANNOT upsize using Disk Utility. I have 100GB spare on my external hard drive (from downsizing two partitions by 50GB each) BUT there is no way Disk Utility will let me increase the size of SuperDuper partition to 350GB :-(((
Cheers
Tricia

Transfer Time Machine backup from one external drive to another

Surely this has been covered, but I can't find it.
If you have your time machine backup on an external drive and get a new (larger) external drive, what is the best way to transfer the backup from one drive to the other (and define the new drive as the backup drive)? Straight copy ? Then to define the new drive, rename old drive to something else and name new drive the backup name?

I haven't tried this yet but a few other methods are described at http://www.macosxhints.com/article.php?story=20071128055047339

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
http://pondini.org/TM/18.html
Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason. At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups. At that point, you can erase the USB drive and use it for another purpose.

I am out of space on my Macbook Air and have a Time Machine Backup. I want to complete reset my mac, but wonder if I can pick and choose what I restore to my computer? Can I also use my time machine backup and external storage as well?

I am out of space on my Macbook Air and have a Time Machine Backup. I want to complete reset my mac, but wonder if I can pick and choose what I restore to my computer? Can I also use my time machine backup as external storage as well for the files I don't need everyday?

If you are using "Restore from Time Machine Backup" option from OS X Recovery, you can only choose from the broad categories presented.
... Can I also use my time machine backup as external storage as well for the files I don't need everyday?
To be clear, if you are asking if you can use the volume containing your Time Machine backup to store additional, non-Time Machine files, the short answer is yes.
It's not a good idea though, since the Time Machine backup will eventually fill all available space, after which it begins to remove old, "expired" backups to make room for newer ones. The presence of additional files doesn't change that fact, and Time Machine will not erase them, but you will encounter a dilemma should you want to store additional files on that volume when there is no remaining space. You will have to make room for them on your own, by deleting existing files. Furthermore, since Time Machine cannot back up its own volume, those additional files will not be backed up by Time Machine.
The easy solution for what you describe is to purchase additional external storage. External USB hard disk drives have become very inexpensive; about $55 will buy a perfectly suitable 1 TB drive.
You can also choose to replace your MacBook Air's internal storage with a larger capacity one. Look for a suitable replacement from OWC / MacSales:
http://eshop.macsales.com/shop/SSD/OWC/Air-Retina
That gets a little more expensive but it is the optimum solution.

Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

It would be much better if you had separate drives for the pictures and Time Machine backups.....but, if you want to use the same drive for both purposes, temporarily move the folder with the pictures to another location for safe storage.
Run the Time Machine backup on the hard drive and verify that everything is working correctly. Time Machine will format the disk for you in Mac OS Extended (Journaled) as part of the backup process.
Then move the folder with the pictures back to the hard drive with the Time Machine backups.
When you have tested to make sure that everything is working again, then and only then should you delete the folder with pictures from the temporary storage area.
Again....it would be much better to keep Time Machine backups on a drive just for that purpose, and other data on another drive for that purpose. This is clearly one of those times when the fact that you can do something does not mean to imply that you should do it.

Is it possible to reassemble a Time Machine backup from recovered files?

I have kind of a sad story that I'm sure some of you can relate to. My Macbook was briefly stolen but by the time I got it back, the partitions had been erased. I had an external backup... but the backup disk failed catastrophically a couple days before it was stolen. The external backup doesn't even mount anymore and makes grinding noises if it's plugged in...
The MacBook had two hard drives in it and one was rather large, so there was space for a partition that I used only for Time Machine. It was erased during the theft, but since nothing had been written to the disk yet, I figured that the chances of recovering data were pretty high. So I went online and looked around for utilities (I used StellarPhoenix... Not sure I'd recommend it to a friend) and managed to spend the next four days recovering the time machine backup to an external computer. I recovered a lot of directories with raw directory IDs attached to them and interesting recovered files inside.
I want to put these files back together as a Time Machine backup (haha, I know right?), because the alternative is around 60 gigabytes of data to sift through by hand.
Here's the top level structure:
MacBook:Root alleygator$ ls -a
.fseventsd
.journal
.DS_Store
.journal_info_block
.HFS+ Private Directory Data?
Lost Folder(s)
.Trashes
"HFS+ Private Directory Data?" and "Lost Folder(s)" directories contain about three hundred thousand directories altogether.
.journal is 33 megs of unicode-looking data that I have to believe is the HFS+ "Journal" part of a journaling file system.
.journal_info_block appears to be an empty file.
.fseventsd contains only a few tiny files that appear to be the the heads of .plists.
Anyway.
The HFS+ folder looks like this:
dir_2243617          dir_2255418          dir_2283556          dir_2383839          dir_880892
dir_2243619          dir_2255421          dir_2283558          dir_2383860          dir_880907
dir_2243621          dir_2255424          dir_2283560          dir_2383882          dir_880909
dir_2243623          dir_2255427          dir_2283562          dir_2383927          dir_880916
dir_2243626          dir_2255430          dir_2283564          dir_2383980
dir_2243628          dir_2255436          dir_2283566          dir_2383986
dir_2243630          dir_2255439          dir_2283571          dir_2383989
dir_2243632          dir_2255442          dir_2283574          dir_2383992
While Lost Folder(s) looks like this:
Folder 1919459          Folder 236881          Folder 346820          Folder 640530          Folder 999005
Folder 1919462          Folder 2368812          Folder 346824          Folder 640534          Folder 999016
Folder 1919465          Folder 2368813          Folder 346826          Folder 640591          Folder 999021
Folder 1919468          Folder 2368817          Folder 34683          Folder 640595          Folder 999024
Folder 1919471          Folder 2368820          Folder 346879          Folder 640599          Folder 999027
Folder 1919474          Folder 2368823          Folder 3468793          Folder 640603          Folder 999030
Folder 1919477          Folder 2368826          Folder 347019          Folder 640607          Folder 999035
Folder 19196          Folder 2368829          Folder 347083          Folder 640611          Folder 999044
Each of these directories seems to contain a few files that I'd want to keep, and Stellar Phoenix tells me that it recovered a couple million files total. A bit of "light reading" into the HFS+ file system suggests that HFS+ uses these integer file descriptors instead of file names, and that the file names are stored elsewhere?
I've looked around on the web for anybody who's had a similar problem and have yet to find anything. It'd be really neat if all you had to do was create a new .sparsebundle and throw all the files into it, but I somehow doubt that'd work...
I'm really concerned that I can't put humpty dumpty back together again at all.
If I can't, what would be the next best thing? I've considered copying the files back to the drive and letting Spotlight chew on them. Eventually, I would probably be able to find the most important files on the drive. But I would prefer something more user friendly than that.
Oh, and feel free to suggest your favorite online backup solution.
Thanks for reading,
Bill

Are you trying to bring all the stuff over? Use Migration Assistant in Applications / Utilities.

If I update from 10.6.8 to Mavericks and I have a time machine backup, can I do a full restore back to 10.6.8 and resume as if I had never updated?

If I update from 10.6.8 to Mavericks and I have a time machine backup, can I do a full restore back to 10.6.8 and resume as if I had never updated if there is a problem? Probably an answer I should know but I don't. Thanks in advance! (instruction suggestions welcomed)

Upgrading the OS is a system wide thing. So all users will receive the upgrade.
It should not delete files and such. However, if you have for example files made with Pages '09. Then the new Pages that comes with Mavericks will make a copy of those files so you can continue to edit them. But those new files can not be opened in Pages '09. BUT again, some people perfer Pages '09 and they use that still. Mavericks will just hide Pages '09, it's still usable in Mavericks just hidden.
To be safe, make a back up of your system before doing any major upgrade.
KOT

HT201250 How can I migrate a Time Machine backup from an external hard drive to a new TimeCapsuls?

I just got a 2TB Time Capsule. I want to migrate my time machine backups on an external hard drive to the new Time Capsule. I have about 430Gb of files to back up; I don't want to wait 7-8 days for the backup, unless I have to. I am using OS 10.7.5 (forget which cat that is). I have mounted the TC drive as 10.0.1.1; I tried to drag and drop from old to "data" on TC, but I get the error "The volume is the wrong format for a backup." Any ideas how I can move my old files to the new, and bypass creating a brand new backup file?
Thanks.

Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
The instructions on that are here
If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.

Is there a way to get my photos off an old time machine backup from an external hard drive?

Is there a way to get my photos off an old time machine backup from an external hard drive?

You will have to connect the Time Machine HDD and click on the Icon. You will see one folder called Backups.backupdb. Click on that and you will have to continue until you find the home folder. The iPhoto library (where the pictures are, not the application) will probably be in your pictures folder. You will have to drag that to your desk top. Then you will have access to individual images.
Ciao.

Errors when transferring my Time Machine backup to an external drive.

Hello,
I need some help transferring my Time Machine backup to an external drive. Let me explain what happened.
I have a Mac OSX Mountain Lion that was upgraded to Mavericks when the upgrade came out. Prior to upgrading, I've been backing up WD Passport Mac with the proprietary software "WD Unlocker on it". It worked flawlessly but after upgrading to Mavericks, I decided to backup and noticed that once i inserted the WD Passport, my screen will flicker, windows will close and reappear.
I decided to read up on this and discovered that Mavericks is not compatible with the "WD Unlocker " program on the Passport drive. Since I already have a backup in place, i decided to restore my computer to factory settings and when I attached the Passport drive with my backup on it, My device will see the backup but it will keep spinning for hours without restoring my backup. I decided to read further on this and I got the same Mavericks compatibility conclusion.
I then copied my entire backups.backupdb folder to my Mac desktop and formatted my WD Passport external drive and got rid of the proprietary software "WD Unlocker".. Once this was completed, I then tried to copy my backups.backupdb folder to my external drive within finder. Each time i tried, i get error messages and permission messages. Even when i changed the permission on the backups.backupdb folder to read & write for everyone, i still get the permissions error.
Please helppppp. I have over 500gb of vital data in my backup.
Thank you.

Since you don't really have a question, I will give you a very broad information source for the next time you have a Time Machine question.
Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
Oh, you cannot use a computer whose only disk drive is the target of a an OS X cloning operation regardless of what software is used for the clone. You can, however, use the source drive except if you try to clone using Disk Utility.

If I back up my iOS devices on my iMac in the US, then do a time machine backup to an external HD, will I be able to plug the external HD into a brand new iMac in the UK and restore the new machine as per the old one, and restore my iOS devices?

If I back up my iOS devices on my iMac in the US, then do a time machine backup to an external HD, will I be able to plug the external HD into a brand new iMac in the UK and restore the new machine as per the old one, and restore my iOS devices?

Since you don't really have a question, I will give you a very broad information source for the next time you have a Time Machine question.
Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
Oh, you cannot use a computer whose only disk drive is the target of a an OS X cloning operation regardless of what software is used for the clone. You can, however, use the source drive except if you try to clone using Disk Utility.

How do I encrypt my Time Machine Backup on the External Hard disk

I have taken a backup of my data onto an external Hard Disk. I have used the Time Machine application to take the back up.
I want to encrypt this time machine backup on the External Hard disk. Any suggestions???

jcorroon wrote:
The Encrypt Backup Disk is greyed out for me. Any suggestions?
Many thanks!
Have you selected the disk?
You can only encrypt disks that are directly-connected (ie, not on a network), with the GUID partition map scheme.
Put your mouse pointer on the dimmed checkbox, and after a moment an explanation should appear.

Time Machine backups fail after initial drive connection, cannot eject drive

I have a Macbook Pro 13" Retina Display, 8GB running OS X Mavericks 10.9.4 and have set Time Machine backups to a 1TB WD My Passport. When I first connect the drive the backup will run fine, but subsequent backups always fail. In addition I typically cannot eject the drive. I've scoured online forums and have completely reformatted the drive, and have even deleted some backup settings files from the hard drive, none of these has resolved my issue.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

I've mistakenly deleted Time Machine backups from my external HDD. How do I fix this?!

I manually deleted several Time Machine backups from my external HDD. Whenever I attempt to empty trash, it states (error code -22) has occurred. How do I fix my predicament?
I understand (now) that I should never do this and ONLY delete from the Time Machine app itself but I did not assume this would be so complex by taking a blind stab at it. How do I either a) place the Time Machine backups where the originated (Put Back is not an option when right-clicked) or b) successfully delete these so I can clear my bin.
I am running Mac OS 10.10 on a 13" MacBook Air (mid-2013) w/ 4GB of RAM and 128GB SSD. My external drive is a 5400 RPM WD USB 2.0 External Hard Drive.

Try Trash won't empty deleted time machine backups

Is possible to have a time machine backup on an external hd connected to either a primary or secondary router and not have "back to my mac" using 10.7.3?

Similar Messages

Maybe you are looking for