Is possible to use PCI 6250 card for order power spectrum in sound and vibration

Hai all,
Iam new to Labview sound and vibration. In my application i need to extract the order power spectrum, for that iam using PCI 6250 NIcard. I tried with our NI example program i cant able to get the prober result. Whether this card is suitable for my apllication ?. If it is suitable can any one explain to me to get the order power spectrum...
In my application iam using one analog signal and one encoder signal(Speed) . Can any one Help...
Thanks in advance,
Vijay

iam using one accelerometer to get the signal from transaxle gear box. This accelerometer signal iam passing to charge amplifier card to get 0-10v signal. This signal iam passing to PCI6250 ai- 0 channel and encoder is connected with motor is passing to ai-1channel for analog tacho. iam using NI example program (Order power spectrum - analog tacho. VI).
sampling rate is 1000 S/s and no. of samples 1000 for acquiring data. But i cant able to get speed and order magnitude value proberly. Encoder PPR -1000. Can u help me....
Regards,
Vijay.

Similar Messages

Anybody using MOTU PCI 424e card for 2408 with new MacPro Cylinder?

I upgraded my older Mac PRO tower which accepted multiple PCI 424e cards for the new Mac Pro cylinder. I purchased from Magma their Express card cage with Thunderbold output in anticipation. Computer arrived and I removed the card and inserted into the card cage, directed audio to the card but no go. iTunes, for example freezes when the card is selected. My MOTU Digital Performer also does not allow Analog in or out with the card.
I have contacted MOTU, they do not have a solution. Magma, the card cage manufacturer has not come back with a solution. Apple suggested visiting these forums for possible ideas.
My studio is dead in the water until I solve this OR I need to go back to the slower old MacPro.
Thanks in advance.

Did you install the FCS suite onto the new computer by using the original disks?
You should. Don't forget to run all updates, repair permissions and restart.
Or did you migrate the applications from the older Mac? You should not do this.
http://discussions.apple.com/thread.jspa?threadID=2113535

Hi! I have 1 credit card and 2 more apple id. Is it possible to use this credit card information for all my apple id?

Hi! I have 1 credit card and 2 more apple id. Is it possible to use this credit card information for all my apple id?

Though you are being asked for card details it doesn't necessarily mean that the card will be charged for the purchase (unless you want to gift content). Have you tried entering your card's details to confirm the account ? You should then be able to remove it.
From http://support.apple.com/kb/HT5582 :
When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance
Is it a new account ? If it is then unless a new account is created by following the instructions on this page (the instructions won't work with existing accounts) : http://support.apple.com/kb/HT2534
then you will need to enter card details (debit cards are no longer accepted in all countries) before the account can be used to download any item from the store.

Is it possible to use PCI-1200 on the DAQ Signal Accessory?

Is it possible to use PCI-1200 on the DAQ Signal Accessory? The documentation for the Daq signal accessory did not mention explicitly whether it
supports the PCI-1200 specifically or not?

Hi,
Yes, you can. According to the manual, the DAQ Signal Accessory is compatible with Lab / 1200 series devices -- this includes the PCI-1200 card.
Regards,
RamziH.

Can I use 2 graphic card for optimisation in adobe?

Hi, I am using Adobe CS6, Premiere pro, After effect, Photoshop, InDesign.
Current set up is Dell XPS 8700, GTX 650 Ti, 128gb Plex SSD, 2TB 72krpm HDD, 16DDR3 non-ECC ram.
I am looking to build a LGA 1366 dual xeon processor workstation.
Plextor M5 Pro as main hardisk for application cache
2x Intel Xeon X5570
16ddr3 10600Registered/ECC ram
SAS 10k rpm HDDs support 6gbps but I only using 3gbps controller (media drives)
Graphic cards:
1x Nvidia Geforce GTX 650 Ti
1x Nvidia Quadro FX 1800
Need advice on the possibility of using both graphic cards in my upcoming set up.
eg, ulitilising the Cudas on my GTX while still enabling the use of quadro fx 1800. (not sure if Quadro fx1800 can enhance the flow..)
If able, pls share some light on how to go about enabling both graphic to use in adobe
My work is mainly, photo and video editing.

Hi Stormancer,
You cannot use two different graphics cards in SLI which is the main benefit of having two cards.
As far as I am aware the FX1800 is optimised for CAD use when you state mainly editing photo and video so I can't see that card being particularly beneficial to you.
If you can afford it why not just buy a better spec single card either the Quadro or GTX?
I currently run a Windows 7 64-bit system with an i7 3700k, three SSD 6/Gbps, RAID 6/Gbps and 2300 Mhz memory with a recently upgraded GTX 680 and find it more than capable of both photo and HD video editing plus some After Effects work. I would class myself as a serious Hobbyist (with 30 years PC experience) and suspect that yes you need the latest kit if you are editing professionally because of the deadlines and high quality required but once you reach a certain level, the gains are very negligible.
While I was looking to upgrade my card, people on here suggested the Quadro K5000 mainly because I have a 10-bit NEC PA301W (25th anniversary present off hubbie) but this card was out of my budget so I settled on the GXT680 and find it more than capable for my needs. It is much faster than the old Radeon 5770 I had. However, while researching I came across this site which explains the way Mercury GPU is utilised, you may find it helpful:
http://blogs.adobe.com/genesisproject/2011/10/diving-into-nvidia-gpus-and-what-they-mean-f or-premiere-pro.html

Is it possible to use Magnetic Strip Card in Java Card

Can Any body knows that is it possible to use magnetic strip card instead of IC MicroProssesor card in Java Card technology ?
is it possible to write java card applet on magnetic strip card ?
Please Help me in this topic
Thanx in advance

If you mean having a combo of mag stripe and cpu/memory on a card, which support javacard tech, then yes.
If you mean having a mag stripe only card which supports javacard, then no, it does not support javacard technology. Correct me if I am wrong but a mag stripe only holds a couple of bytes of datd doesn't it? Regardless no way enough for jcre, applets etc.
Apu

Are there PCI thunderbolt cards for mac pro 3.1?

are there PCI thunderbolt cards for mac pro 3.1?

DCWinton wrote:
Rick
It's that last sentence I'm curious about. "However a MacPro already has much more capability already built in than Thunderbolt can add."
I'm thinking of getting a Mac Pro, but see that it doesn't seem to have Thunderbolt. I'm not sure if I care. The reason for the Mac Pro is that I'm topping out my 8gb RAM 27" iMac capacity with the volume of work going through it, and my tech tells me I'm pushing it too hard. I use it to run a small law office, but usually have about 15 apps open, with lots going on in the network in the background.
Is there any reason to wait until Apple puts Thunderbolt into the Mac Pro?
Thunderbolt will not increase the performance capability of the MacPro. It will add a bus that can be convenient, especially later on when Thunderbolt devices become more common, more mature and better supported - oh, and with more common will come less costly. From a pure performance standpoint the existing PCIe slots are much more capable and cheaper to implement. You would be giving up nothing with a current MacPro.
My opinion. Thunderbolt is really a great move forward in the long run - needed something to replace Firewire and this is it. But there is no reason to wait on Thunderbolt on MacPro - it is redundant.
Rick

What is the best e-Sata PCI RAID card for Mavericks.

What is the best e-Sata PCI RAID card for Mavericks. Bought a new MAC PRO with Mavericks and the older PCI 1095,3124 that I used on older MAC Pro does not work. The MAC sees it, but the drivers never show up as being installed. If I could find drivers that work or a recommended PCI card it would be appreciated.
Thanks

PM made sense - 6 yrs ago when disk drives were much slower. Today it is a bottleneck.
SAS makes more sense. Outside of SSD, no disk drive maxes out by itself one PM interface (an SSD will) but it also means just two drives are enough to do so. So check out why to avoid PM:
www.macperformanceguide.com

HT3702 Isn't it possible to use my debit card information in payment method information?

Isn't it possible to use my debit card information in payment method information?

As far as I know debit cards are no longer accepted as a valid payment method - they are not listed on this page and there have been a number of posts about them being declined. Do you have any of the other payment methods that are shown for your country ?

HT201454 How do you handle family members outside the household being a part of the Family Sharing program? I don't want them using my credit card for itunes and/or apps on their phones - just want to be able to share pictures/videos.

Wanted to include my sister and parents in the Family Sharing group under the iCloud app, but I don't want them using my credit card for their purchases. We just wanted to be able to share pictures and/or videos and find each other, if necessary. Is there a way around my card being the default for them when they go to purchase something?

If you don't want your sister to make purchases on your credit card, then Family Sharing is not an appropriate way to do what you want. You can use Find my Friends to locate each other and you can use Shared Photo Streams to share photos.

I have registered for Apple ID. How do i use my credit card for me to be able to purchase apps?

I have registered for Apple ID. How do i use my credit card for me to be able to purchase apps?

You edit your account and add the credit card as a payment method. See:
iTunes Store: Changing Account Information

How to not use a credit card for my apple id

how to not use a credit card for my apple id

Check this out it should help:
http://support.apple.com/kb/HT2534

TS1646 We have several apple devices in our family who use my debit card for itune charges. I need to find out which device (itune account) these charges are coming from. Can you help?

We have several apple devices in our family who use my debit card for itune charges. I need to find out which device (itune account) these charges are coming from. Can you help?

You can't tell which device a purhcase was made on, but if your family members each have their own iTunes account to which your card is linked then you can check the purchase history on each of those accounts via the Store > View Account menu option on your computer's iTunes - that should have 'purchase history' section with a 'see all' link to the right of it

How would I use a credit card for In-app purchases instead of my gift card credit?

I have a gift card credits linked to my account, but I do not want to use it for an in-app purchase. I want to use my credit card for the purchase. Is there any way around this?

You can't for in-app purchases, when you have a balance on your account then that will automatically be used for your purchases.
For other types of purchase you can try gifting the item to yourself so that your credit card is charged (gifting can only be done via a credit card), but you can't do that with IAPs.

HT3702 I can t use my visa card for perchasig befor it was working?

Please help me i can't use my visa card for perchasing befor ot was working

my visa card is debit card.
My country is VietNam. I has use my visa card for old my ID apple before but now i don't remember this id apple. I want use my card for different my ID but itune not accept

Is possible to use PCI 6250 card for order power spectrum in sound and vibration

Similar Messages

Maybe you are looking for