Is possible to work without extending the schema sccm2012? as I can do?

I am implementing SCCM 2102
and will not let me extend the schema
in the forest. that I can make my
implementation work seamlessly. Is it possible?
thks

Ok, thks,  I'm new to this and wanted
to be sure because when shipping to
discover both active directoryusers and devices
have errors like 4913
On 12/17/13 15:01:11, component SMS_SITE_COMPONENT_MANAGER on computer AOESCCMUIO.AgipOilEcuador.pri reported:  Configuration Manager cannot create the object "cn=SMS-MP-C01-AOESCCMUIO.AGIPOILECUADOR.PRI" in Active Directory (pri).
Possible cause: The site server's machine account may not have full control rights for the "System Management" container in Active Directory
Solution: Give the site server's machine account full control rights to the "System Management" container, and all child objects in Active Directory.
Possible cause: Another Active Directory object named "cn=SMS-MP-C01-AOESCCMUIO.AGIPOILECUADOR.PRI" already exists somewhere outside of the "System Management" container
Solution: Locate the other object with the same name, and delete the object from its current location.  Then allow the site to create a new object.
Possible cause: The Active Directory schema has not been extended with the correct ConfigMgr Active Directory classes and attributes.
Solution: Turn off Active Directory publishing for each site in the forest, until the schema can be extended.  The schema can be extended with the tool "extadsch.exe" from the installation media

Similar Messages

  • I need to extend the schema for iPlanet Dir. 5.0 and add custom objectclasses and atributes. I do this by adding entries in the 99user.ldif file. Its not working. Any ideas?

    Hi
    I need to extend the schema for iPlanet Dir. 5.0 and I do not want to do so from the console. As per the documentation, I need to either add entries in the 99user.ldif file or define my own custom [00-99]myname.ldif file. I tried this but its not working.
    I have made the assumption that there is no explicit import step for the 'user defined' schema files (as it is for user data ldif files). I assume that on start (or on opening the console), I'd be able to see the new schema after the server has read the schema file.
    I have verified that entering new objectclasses and attributes from the console adds entries into the 99user.ldif file. So why is the reverse process not working. Can anybody throw some light on this? Also in case my assumptions are faulty, please let me know.
    I did not change the aci entries in the existing ldif file. Is any modification needed there? I was logged in as the Directory Manager during this testing process.
    regards
    Sikka ([email protected])

    Hi Sikka,
    The server reads its schema configuration on startup. If you manually modify the schema files while the server is running, it will not have any effect. You have to restart the server.
    The console adds the new schema elements over LDAP (you could do that as well, you only have to modify the cn=schema entry), so the server is aware of the changes immediately and thus restarting is not needed.
    I hope this helps.
    Bertold

  • Steps to extend the schema if I have no access to the web console

    Hello,
    I am usin DS 6.2. The web console is not applicable in my case. So I must extend the schema manually.
    I want to add an attribute type and an objectclass. I do have a test server and I did
    ldapsearch -L -b "cn=schema" objectclass='*'
    and then took what I need:
    dn: cn=schema
    changetype: add
    attributeTypes: ( 1.3.6.1.4.1.42.2.27.9.1.333 NAME 'orclnetdescstring' SYNTAX 1.3.6.1.4.1.1466.115.121.1.40 X-ORIGIN 'user defined' )
    objectClasses: ( orclservice-oid NAME 'orclservice' SUP top STRUCTURAL MUST cn MAY orclnetdescstring X-ORIGIN 'user defined' )
    When I do:
    ldapadd -c -h hostname -p 389 -D "cn=Directory manager" -w password -f myldif
    adding new entry cn=schema
    ldap_add: Object class violation
    I tried to add these lines
    attributeTypes: ( 1.3.6.1.4.1.42.2.27.9.1.333 NAME 'orclnetdescstring' SYNTAX 1.3.6.1.4.1.1466.115.121.1.40 X-ORIGIN 'user defined' )
    objectClasses: ( orclservice-oid NAME 'orclservice' SUP top STRUCTURAL MUST cn MAY orclnetdescstring X-ORIGIN 'user defined' )
    to 99users.ldif and restarted the server. No progress.
    any idea please?

    You can either use 2 "changetype:modify" operations (not changetype:add since you're trying to modify an existing entry), or you can stop you DS, then edit the 99user.ldif by hand and start it again .

  • I find I am unable to print any photo because the program "Can't find a theme and the Print command wont work without at least one theme. How can I overcome this problem?

    I find I am unable to print any photo because the program "Can't find a theme and the Print command wont work without at least one theme. How can I overcome this problem?

    reinstall iPhoto
    see this discussion down a few from your post
    https://discussions.apple.com/thread/5426566?tstart=0
    LN

  • Access other schema's table without specify the schema name

    Hi, need ur help again,
    I would like to access other schema's table without specify the schema name. for example,
    select * from hr.jobs;
    What priviledges i need if i want to select the data in this way:
    select * from jobs;
    Thanks!

    Public synonyms have their place, but are not generally a good idea as they will cause conflicts with other schemas and applications. Another think that you can do is issue the
    ALTER SESSION set CURRENT_SCHEMA = schema;
    The CURRENT_SCHEMA (8i and above) parameter changes the current schema of the session to the specified schema. Subsequent nqualified references to schema objects during the session will resolve to objects in the specified schema. The setting persists for the duration of the session or until you issue another ALTER SESSION SET CURRENT_SCHEMA statement. CURRENT_SCHEMA is a session parameter only, not an initialization parameter.
    This setting offers a convenient way to perform operations on objects in a schema other than that of the current user without having to qualify the objects with the schema name. This setting changes the current schema, but it does not change the session user or the current user, nor does it give you any additional system or object privileges for the session.

  • After a few minutes, the page down won't work without clicking the mouse pointer on the page I am reading to activate page down again. Is there a way to go back to page down working every time without having to click the page first?

    Question
    After a few minutes, the page down won't work without clicking the mouse pointer on the page I am reading to activate page down again. Is there a way to go back to page down working every time without having to click the page first?

    Today, two other users reported issues with the back-forward history list dropping down if they hovered the mouse pointer over the back or forward button -- without clicking -- and then moved the pointer downwards. One user was on a touchpad, I don't know about the other user. Are you experiencing anything like that?

  • First timer.  Just installed Time Capsule.  The first backup looks like it will take two days at the pressent speed.  Can I close MacBook Pro and have first back up  continue, and can I unplug and plug in at work without affecting the backup?

    I'm a first timer on this (or any) help site. I just installed Time Capsule.  The first backup looks like it will take two days at the present speed.  Can I close MacBook Pro and have first back up continue, and can I unplug tomorrow and plug in at work without affecting the backup?

    Hi Oneinspirit,
    Time Machine backups can be paused by choosing "Stop Backing Up" from the Time Machine icon on the right hand side of your menu bar ( ). Once you're ready to resume the backup, you can choose "Back Up Now" from the same icon.
    Start a backup: Click the Time Machine icon  in the menu bar, then choose Back Up Now.
    Pause a backup: Click the Time Machine icon  in the menu bar, then choose Stop Backing Up.
    OS X Yosemite: Start, pause, and resume a Time Machine backup
    http://support.apple.com/kb/PH18851
    All my best,
    Allen

  • I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software

  • Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this?

    Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this? While Apple's headphones have (finally) admittedly gotten better of late, I still prefer the much more comfortable headphones & sound quality that Bose makes and that I spent the money for.

    Bose Product Support

  • HT204492 can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

    can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

    As this is the forum for PPC (pre-2006, non Intel) iMacs I assume that is what you have.
    Try pairing the remote again:
    How to Pair your Remote to your Mac:
    http://support.apple.com/kb/HT1619?viewlocale=en_US

  • I did a presentation with many images and animations, now I need to change only the images without modify the related animations. How can I do it?

    I did a presentation with many images and animations, now I need to change only the images without modify the related animations. How can I do it?
    I use Keynote 09

    Select the image you want to change and go to Format Menu>Advanced>Define as Media Placeholder (or command, option, control i).

  • HT4356 I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

    I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

    Have you tried restarting the printer? Reboot the iPad as well.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I have a mac pro 1,1. I would like to know if its possible for me to upgrade the parts to where i can install osx mountain lion, or osx mavericks?

    I have a mac pro 1,1. I would like to know if its possible for me to upgrade the parts to where i can install osx mountain lion, or osx mavericks? I am currently adding more ram so it will have 32gb of ram, i have 2 250gb HDD but adding a 250gb SSD , and have a ATI Radeon HD 4870 512mb that i will most likely upgrade to an ATi Radeon HD 5570 1gb.

    The SSD will boot fast, but the real change is launching 10 programs in 10 seconds and being able to use them. (20 seconds for a few big suites).
    I would not add or upgrade to 32GB RAM. You can get 8 x 2GB for $100 on Amazon.
    Those 250GB HDD are "old" and slow and overdue to be replaced, reformat and use t o backup the system.
    Samsung 250GB SSD is down to $150 or so on Amazon also.
    The 5770 is gone, hard to find, EOL and over charged for when you do find one.
    you could look into how to use a PC 6870 or others.
    Or, you could hold out and wait for a refresh of Mac-Mini which can be just as fast or faster and run Mavericks.

  • Can I leave my mac book air plugged in all the time at work, without damaging the battery?

    I know people may have asked this questions many times, however I intend on using my mac book air at work and would like know I I can leave it on powered on in the office and the unplugged at night?. Would it damage my MacBook?

    Yes. It will not damage the battery. You do not need to unplug it at night. If you use it from the AC charage all the time, then about once every two months you should use it on battery power until the battery drops below 20%. Then fully recharge the battery after which you should allow the battery to "rest" for about one hour. It is OK to use the computer during that time but do not yet connect the AC adaptor. Follow this practice and your battery should have a good life.
    About Batteries in Modern Apple Laptops
    Apple - Batteries - Notebooks
    Extending the Life of Your Laptop Battery
    Apple - Batteries
    MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
    Battery University
    Apple - Batteries - iPod
    Apple - Batteries - iPhone
    Apple - Batteries - iPad
    Apple Portables- Calibrating your computer's battery for best performance
    Mac notebooks- Determining battery cycle count
    How to Calibrate Your Mac, iPhone, or iPad Battery | MacBlend

  • How do I extend the schema with a new auxiliary objectclass in Directory Server 4.11?

    There seems to be no way to mark a new objectclass as AUXILIARY from the Netscape Console with Directory Server 4.11. Likewise, there is no mention of auxiliary objectclasses in the Administrator's Guide or Deployment Guide. When I simply mark the new objectclass with a superior of 'top', I get an Object class violation error when I try to add the objectclass and new attributes to an existing entry.
    So my questions are:
    1. Are auxiliary objectclasses supported in Directory Server 4.x?
    2. If so, how do I add them with the Netscape Console or directory in the configuration files?
    3. If not, is there a workaround that mimics the behavior of auxiliary objectclasses?
    Thanks.

    Even if 4.x supports marking objectclasses as Auxiliary (which I don't think it does. iDS 5.x does), the Directory Server ignores the flags when it comes to schema checking, ie you can mimic behavior of auxiliary objectclasses without tagging the objectclass as Auxialiry in the schema.
    Regards,
    Ludovic

Maybe you are looking for