Is Preferred vendor approved automatically. Is preferred vendor called VL

Hi friends
Is Preferred vendor approved automatically. Is preferred vendor called Vendor List.
Regards
Surya
Edited by: surya K on Dec 29, 2008 4:03 PM

Hi Surya,
Whenevr you do "SHOP", under source of supply system will propose preferred vendor based on the list which we maintained on product level or product category level....if we not maintained these lists then system will propose you the last vendor of shopping cart.....
Thanks
Ravi

Similar Messages

  • PO Workflow: PO needs to approved automatically when need-by-date changed

    Hello All,
    Please help me in suggesting ideas on below requirement.
    Requirement: PO needs to be approved automatically when ever Need-By-Date/Promised-Date changed by buyer.
    Currently it is going and checking for the buyer approval limit and keeping the PO in 'Requires_Re_approval' status.
    Please suggest me on this.
    Thanks/ReddyS

    Hello Team,
    Please give us some suggestions/ideas on how to proceed furthur.
    Thanks/

  • When i try to make a call it automatically goes to end call and back to my contacts

    when i try to make a call it automatically goes to end call and back to my contacts

    This is a common problem with iPhone 4s (and IOS 5)  There isn't ' anything you can do about it, so you're best bet is to go down to the store and get an exchange. If you have an older iPhone (3gs/4) roll back your update from IOS 5 to IOS 4.

  • Automatic mute in outgoing calls

    Hi all,
    after upgrade to V6 bundle 1879 mute goes on automatically in all outgoing calls (Curve 9300).
    Someone has some suggestions?
    Thanks in advance 

    Hello,
    In this case we can try to reload the software on the BlackBerry smartphone to make sure it is running the latest version and there are no issues with the OS.
    Here is how to backup your BlackBerry smartphone http://bit.ly/aSediX
    Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
    Link: http://www.blackberry.com/btsc/KB11320
    Once completed test it and proceed with selective restore here is how to restore http://bit.ly/bSbfl3
    Thank you
    -DrP
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Can you make core center automatically close after being called on startup?

    Can you make core center automatically close after being called on startup so it can set cpu fan speed to a slower fixed speed then exit?
    If core center really cant do such a simple task then can speedfan or another program?

    Quote from: bassmadrigal on 13-July-05, 07:42:36
    Why don't you want them running. Speedfan has a very small footprint.
    Just seems unnecesary seeming as it does its task as soon as it runs and its changes then stay applied. Speed fan is probably better but core center takes 10mb.
    Quote from: syar2003 on 13-July-05, 07:57:02
    You dont have to have it running to set a user specified fan rpm .
    Once it's set it is stored in the corecell/cmos chip on the motherboard .(until a cmos reset) .
    So to answer your question .
    There is no need to have it autostarted at each boot ...
    Thats how i have used it .
    Only reason to have it running is with MSI's "CnQ" control of the fan , varies with the load of the processor
    Thats strange for me the speed resets to default as soon as I restart my pc (about when the bios engages which is however tangibly after the graphics card fan revves up to its full speed). Depending on the temperature of the proccessor it goes to 3300rpm (less than 42c) or 4500rpm (too loud for ~45c IMO and MSIs "cool&quiet" option seems to agree, it doesn't even set it as high as 3300rpm)

  • System needs to approve automatically when the same user has different role

    Hi Gurus,
    My issue relates to approval in Shopping cart.
    Say this is my Issue.
    This is the Approval detemined by the system.
    1 - X
    2 - Y
    3-  Z
    4-  X
    5- Y
    X & Y are the Same user but with different role in the Approvals.
    First time 'X' would get the cart to approve it manually but second time system should automatically approve it. Same should happen for 'Y' as well. So now both X & Y needs to approve the cart only once.
    Please advice me how to approach this issue or If anyone experience the same kind of issue please let me know how to resolve.
    Thanks for your time to spend on it.
    Thanks,
    SNMPkumar

    Hi,
    You can handle it with N-Step BADI Workflow.
    Regards,
    Masa

  • Role approver - automatical approver

    Hi,
    We are testing IDM in our organization and we have following scenario. Managers of department are defined as role approvers. For example manager of operative is defined as role approver for role RW_access_operative. As manager of department is also responsible for adding this role to users in his department. Is it possible to setup IDM this way: If manager add role to the user and he is also role approver (and he is only one approver) the IDM will automatically approve this role assignment for it. As managers are complain that they must assign role and then approve it :-( which is time consuming ...
    Thanks for answer

    In your workflow, add a condition where you generate the approvers list.
    1. Read all the approvers for the role selected.(May be a configuration)
    2. If the above list contains only 1 approver = WF owner (Who initiated the workflow), set the list to null and set the variable to approved or true, (so that the rest of the workflow will proceed as if the request is approved).
    3. If the list from #1 has more than 1 approver id, remove the case owner id from the list and generate the approval workitem for the rest of the approvers.
    Thanks,

  • DX650 Directory prefers to call SIP URI

    Hello,
    I have some DX650's deployed, and at least one of them, when using the corporate directory to look up a user, attempts to dial that user at his SIP URI address rather than dialing the DN.  I confirmed that the telephone number in active directory is populated and it imports into the CUCM properly.
    Has anyone run across this issue before?
    Thanks,
    Brian

    Hello,
    Do you know how to get the DX-650 corporate directory to show the DN/Extension of the user in search results instead of the Directory URI, or show both in the search results?

  • When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, then when I unlock the phone it automatically redials the failed call,

    When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, the problem arises whenever I unlock the phone, it automatically redials the last failed call, it doesn't do this with missed calls that are on the locked screen, if any. It is really annoying as sometimes the phone doesn't respond to attempts to end the call before it connects to the number. I then have to explain that it was my phone and not me, I look like an idiot, which I don't really need any extra help with!! Does anyone have any ideas? I don't want to stop missed call from showing in the locked screen but it might be associated with the failed calls and therefore be the only resolution

    I have had the same issue which was driving me mad but think I have just found a way around it. In iOS 7 if you swipe up on the lock screen to access quick settings and go into timer then click the home button you get into the phone without calling the person back. Not a great 'fix' but hope it works for you. Come on Apple this isn't good enough, fix this bug otherwise you will lose your customers.

  • How do I turn off automatic dail on dropped calls

    How do I turn off automatic dial back when phone drops call?

    This is a cellular carrier feature.  Contact your cellular carrier to turn it off.

  • Podcast automatically playing after missed call?

    Hi,
    Using the iPhone 5 and the last 2 days I've had missed calls while the phone is on silent then once the call is missed my podcast I last listened to starts automatically playing? Bit of a pain when you work in an office...
    Any idea why this is happening people?
    Thanks alot
    Martin

    anybody?

  • Skype automatic left group while calling or not.

    HELP!
    Been using skype but once after 6.18 release, skype has been automatic leaving conversion especially in group for no reason. It just kick me out of the group randomly but for 1 to 1 is fine.

    I am also facing the same issue.
    Each time I join a group, it automatically shows up the message that "You have left the group".

  • Speakerphone automatically on when answering calls

    For some reason the speakerphone is automatically on everytime I answer a call. I have to turn it off every time.  I looked all through the settings but couldn't find anything related.  Anyone else have this happen?  Any ideas what it might be??  Thanks.

    The speakerphone is only be available while on a call. Once the call is ended the speakerphone is disabled. While on a call, select the Speaker symbolto enable / disable. To resolve your issue, try a soft reset on your device. Remove your battery while your device is powered on, wait about 30 seconds, replace battery and power on your device. 

  • Help -- Automatic Fax answers ALL calls

    I have Tiger 10.4.3.
    I have set up the Fax to answer automatically. Unfortunately, when the phone rings, the fax modem answers ALL of the calls.
    My telephone and fax modem share the same telephone line.
    What can I do to enable the phone, and my answering machine, to be able to receive calls without the FAX engaging?
    ibook G3   Mac OS X (10.4.3)  
    ibook G3   Mac OS X (10.4.3)  

    Hi:
    Did you get your fax/voicemail/voice line problem solved yet? If you didn't, might I suggest that you check out an earlier post of mine at http://discussions.apple.com/click.jspa?searchID=-1&messageID=728269 ? My configuration has updated a little since then, PhoneValet 3.1 for call logging and voice mail - doesn't sound like PhoneValet is applicable in your case but the solution should still work (so long as your computer's modem can recognize distinctive ring, aka custom ring) -- and OS 10.4.5. And you'll need distinctive ring feature from your phone company. The setup decribed in my earlier post, taking into account the software version updates described here, is still working great for me. The only potential issue that I could envision for you is whether your modem will recognize distinctive ring or not -- a review of posts in this forum suggests that some computers' modems do, and some computers' modems don't. Maybe a search in this forum on the search terms "distinctive ring" AND "iBook G3" could shed some light on that.
    2001 Quicksilver G4   Mac OS X (10.4.5)  

  • Automatic Partner Confirmation in Call List Management

    Hi guys,
    There are two possible ways to deal with Call Lists and the confirmation of accounts that are in this Call List. One is that after selecting the account and ending the call, the account will be removed from the call list. The other is, that the account will not be removed, this is done by call list profile NO_AUTO_PARTNER_CONFIRMATION.
    We are using profile NO_AUTO_PARTNER_CONFIRMATION now because it can happen that an employee selects an account from the call list without calling at all. The problem is that even those accounts stay in the list that have been completed, Interaction Record for their planned call gets status completed. This way it is impossible to get an overview of the real status of the call list.
    We are looking for a solution to remove the account from the call list once the status is complete.
    Looking forward to any hints and help
    Thanks
    Nicole Lange

    Hi Nuno,
    it seems like this is going into the right direction! I copied the confirmation profile, selected both fields and assigned it to the role.
    I also went to Business Transaction Synchronization > Define Call State Mapping Profile and made the following settings:
    1. Call State Mapping: Call State "Complete" and User status "E0003"
    2. Alternative Statuses: Call State "Complete" and User status "E0007", alternative Status CANC
    3. Status Mapping: User Status "Complete" and Status mapping "completed".
    Unfortunately, the system behaviour has not changed. So when I set an Interaction Record to complete and end the call (all is being done manually by the way) the call will not be removed from the call list. Also, the percentage of progress does not change.
    When I unflag the field "No-auto completion" all calls will be removed from the list once I selected one. No matter if I set the Interaction Record to complete or not.
    I found out that in order to synchronise from transaction to call list an action profile is needed. So I used action profile CALL_LIST_SYNCHRONIZATION and added it to the transaction. However, still the same problem.
    Any config that I am missing?
    Thanks
    Nicole
    Edited by: Nicole Patrizia Lange on May 15, 2011 1:49 AM

Maybe you are looking for

  • How to purge the workflow which is in process

    Hi Friends, I am facing one problem in the AME Workflow. when a user submit a page for approval process, workflow engine invokes . and in the hr_api_transcations table transacation id is created for that workflow transacation. now the problem is, if

  • Where can I find some appications' source code  written by swing

    hello, everyone I have studied swing for one month, and I have some basic idea of the swing. but I want to learn more about the swing. can anybody tell me how can I improve myself now or show me where can I find some appications' source code written

  • Adding columns to a single documents in facing pages

    I am using facing pages, and I dont need columns to all pages, but I would like to know how I can add the columns to the pages that I do need them ?

  • Flash with AS3 not loading properly in browser on mac

    I am having a strange problem.  I have a flash swf file that has AS3.  It works fine on all MACs and PCs with client, except I have found one client MAC that displays the swf file as if the AS3 did not run to hide the layers.  It loads the swf file,

  • Why do i have a lot of "other" storage?

    I just restored my iPod touch 5. It was having problems syncing doubles of all my music. I restored my iPod and re synced all my music. All my music synced properly but now I have over 11 GB of "other" storage. How do i get rid of the other storage.