Is Prelude really a replacement for OnLocation?

Hi,
I've been reading up and it seems that adobe means for Prelude to replace OnLocation. That seems odd to me. I use OnLocation to create shot lists during pre production and then as a video assist and audio monitor on set (Bypassing the need to ingest later on and more importantly for me, bypassing the need for SD cards or any kind of media drive other than my computer's drive). Does Prelude do any of these things? I haven't seen any of this functionality.
In fact Prelude starts exactly after OnLocation does it's thing. Or rather OnLocation bypasses the need for Prelude in many cases but not the other way around. I'm hoping I just haven't found these features on Prelude yet. (I have been playing with it for a short time really). Are these on set features expected at least?

Thanks Wes. I actually have requested the features. I was honestly asking if these features are actually on Prelude as I have little experience with it. I didn't think so and your answer suggests what I was afraid of. OnLocation has been discontinued and there is nothing on CS6 that effectively allows users to continue doing the things OnLocation's feature set allowed them to do. Maybe only a small group of people found it useful I guess. That's a shame.
However, I do believe Adobe intends to market Prelude as a replacement to OnLocation here's a quote from the adobe site:
Try Adobe Prelude CS6. We encourage our valued Adobe OnLocation users to transition to Adobe Prelude CS6.
Here's the link to that: http://www.adobe.com/products/onlocation.html
Also:
Effective May 7, 2012, Adobe Prelude CS6 replaces Adobe OnLocation in both Adobe Creative Suite® 6 Production Premium and CS6 Master Collection software, as well as in the new Adobe Creative CloudTM membership.
from: http://www.adobe.com/content/dam/Adobe/en/products/onlocation/pdfs/adobe-onlocation-eol-fa q-ue-v1.pdf
I should mention I think Prelude is cool for what it does. I could see real use for it. I just expected that since they meant Prelude as something you could transition to from OnLocation, it would have similar features. Thanks for clarifying.
Though if it is not meant as a replacement then I would suggest changing some of the wording on the site. I found it a bit misleading. To me, asking people to transition from one app to another implies similar feature sets. You wouldn't ask people to transition from Premiere (if it were discontinued) to Indesign after all.

Similar Messages

Is MacBook Pro really a replacement for my Mac Pro

I've had a Mac Pro for the past six years but it's recently started playing up and seems to need a new graphics cards.
But I think it's getting to the point where this beast of a computer that is still very powerful, fast and reliable up till now, needs replacing.
All my peers are saying that I should use a MacBookPro as a replacement since I do work outside part of the time and then I've only got one computer to worry about and no need to keep transferring information.
But I'm not sure about just having a laptop. At the moment it's what I'm relying on while the MacPro is being looked at, but already it's got 3 things plugged into it, an external 1TB hard drive because its internal HD at 160gb is too small, a USB for a laser printer and an amplifier to play my music through proper speakers.
Then I'm being told I should hook up the laptop to a 20+ inch monitor while working in my studio.
Can a little computer like this cope with all those peripherals and power demands, plus others like iphone/ipad charging/syncing, plus other bits and pieces from time to time?
I read that my MacPro has a 900W power supply, so it can easily handle all those peripherals of course but can a little laptop cope, and most importantly over a long period, for years. There's no point me investing in a laptop that could easily cost as much as a new iMac if it's going to collapse under the strain after a couple of years when my MacPro has had 6 good years of solid use.
Any advice, experiences out there of the same scenario as me?

A MacBookPro is not a substitute for a workstation like a Mac Pro.
Depending on your usage, it may well be enough for you, but when simply comparing raw power, the MacPro will eat the laptop's lunch.
Tha said, I have have 4 things plugged into mine, including a 24" monitor, two HDs external speakers and it's used for charging iPads and iPhones and it deals with that effortlessly.
The key question is: what do you use your Mac for? Video? Graphics? Text? Development? That'll decide which Mac to get.

Will you replace the add-on "CaptureFox". I really need it for my work. Thanks

Will you replace the add-on "CaptureFox".
I really need it for my work.
Thanks

If it is on silent mode, then it will still vibrate when it rings. Ring the phone.
Other than this, what on earth do you expect anyone here to do really!!!

QuickJog 1.0 - Shuttle/Jog Replacement for Premiere CS6... almost

quickJog 1.0 - "fixing what Adobe broke in CS6"
a shuttle/jog replacement for Premiere/Prelude CS6
* see below for download links and instructions *
Introduction
I'll waste no time in expressing my opinion on this one: I loved the jog control in previous versions of Premiere, and a small part of my heart died when I realised that those beloved controls couldn't be reinstated in CS6 (though an ever larger chunk died when I realised that Q and W don't work by default in Prelude... ).
JKL is great as a concept, but in practice, not very responsive - it's difficult to make precise jumps in speed quickly, and I'd hate to log footage in CS6 using the JKL keys alone.
It was whilst reading through a different thread on the forums that I had an idea. Why not just jog with the middle mouse button? REAPER uses a similar idea to great effect for scrubbing.
And so the journey began.
Installing/using quickJog
Pre-requisites
Glovepie is only available for Windows. The script, therefore, only works on Windows.
Sorry Mac users.
To use quickJog, you'll need to download the following:
GlovePie, from glovepie.org. Doesn't matter whether you grab the version with or without emotiv support, as long as it's a recent version
The quickJog script, from bit.ly/getQuickJog (unreserved thanks go to Creative Inlet Films for hosting this)
A mouse with a middle-mouse button/clickable scroll wheel
You'll also need to ensure:
The JKL keys have not been re-mapped in Premiere. This is essential, as quickJog 'presses' the JKL keys to alter the jog speed in Premiere.
Installation/usage
Is currently as simple as...
Start Glovepie
From the File menu, select Open...
Navigate to wherever you unzipped the quickJog script. Open it.
Click the Run button
Click the [ .] button at the end of the menu bar to minimise Glovepie to the system tray
To shuttle, click on the program monitor, source monitor or trim monitor, and scroll the mouse wheel. This functionality is built-into Premiere. You can hold Shift for bigger jumps.
To jog, click and hold the middle-mouse button over the source monitor, program monitor, or timeline, and move left or right to increase/decrese the jog speed (just like the old jog slider).
QuickJog tracks the position of the mouse itself, not the position of your mouse cursor, so don't worry about the cursor touching the edge of your screen.
Keep your eyes on the video, not the mouse!
To exit, right-click the glovePie icon, and select Exit.
quickJog works in Prelude too, which is pretty cool.
Links/Misc
HOW AWESOME WOULD SOME EXTRA BITS OF INFORMATION BE FOR THE WORLD? Like information on how to tweak the configuration variables??
Pretty awesome, I'd say James. Have you thought about actually writing this section, then?
Paha! Don't be crass.
Aww.

I stand humbly informed!
In hindsight, I'm not surprised that the JKL keys are a popular choice amongst editors (especially for those who've moved across from other NLEs), but it does rest somewhat uncomfortably in my heart. It feels like Adobe have replaced the pedals and gearstick in my car with a keyboard: not great for those moments when a child runs into the road.
The Shuttle Pro (and Bella to my knowledge?) controllers emulate left/right arrow keypresses to do their work, making the playback 'glitchy' during shuttle operations - I don't like that. I didn't particularly like the feel of the Shuttle Pro when I tried it either. I do like controllers like this (I have one), but have been working for some time on interfacing between the Sony 9-pin protocol and Premiere.
As such, my intermediate preference has been to use a graphics tablet (with a keyboard) for NLE work - hence why having the jog/shuttle controls on screen was so darn useful! Now that I have quickJog mapped to the stylus eraser, edits are much faster.
Quick aside: Huge commendations on just how much can be mapped to keyboard shortcuts in Premiere, huzzah!

I could not get my iPhone 5 which purchased in Australia repaired by apple in the US. Guys from apple retail store verified a replacement for me and asked to call apple care. However, apple care said they cannot get it fixed nor repaired.

My iPhone 5 got some defects and I went to a apple reatil store yesterday. The guy from the genius bar told me that he verified a replacement for me. And I need to call 1-800-apple care to finish that process. I called apple care and one of the senior supervisors told me that I have to send it back to Australia (where I bought this iPhone) to get it repaired. Turns out I could not solve the problem after a apple store vist and several calls. I just want to know if there any way to solve this. This iPhone is a factory unlocked one that purchased in an apple retail store in Melbourne at the day it was first released. And my experience today is not what I can tell as fair. I will be really appreciate for any helps and advices. Thanks.

Warranty on iPhone is not international, but valid only in country of
original sale. Since you purchased the iPhone in Australia, your warranty
is valid only in Australia. You must either personally return the iPhone
to Australia for evaluation and possible replacement or sent it to someone
in Australia to take into Apple for the evaluation. Apple will not accept
international shipments for repair nor will Apple ship out of the country
after replacement.
Sorry to be the bearer of this news, but it is the way iPhone warranty and
replacement has always worked.

Is Apple about to introduce a replacement for iWeb?? and where can I download iWeb to replace the one I lost??

Having spent a little time searching for a replacement download for iWeb (details of why below) it seems that I cannot find it anywhere in Apple Land. From my limited experience here (iphone, macbook pro, airport extreme and airport express) it looks like Apple gradually withdraws stuff prior to introducing something really exciting to replace it.
So
Question:   Is there a new super replacement for iWeb about to be introduced?
I cannot believe that Apple would take away something as great as iWeb (having read reviews and used it myself as a complete web novice) without giving us something better.
I foolishly followed some genius advice and did a wipe/reload of Lion, prior to updating to Mountain Lion (my fault, I thought my lovely Macbook Pro was running a little slow - probably wasnt - just me being impatient.) Anyway, long story short, I lost iphoto (got it back by re-purchasing but would like a refund - another string running with this),   iWeb - can't find it anywhere - asked questions here in Apple Land and am getting some conflicting answers.
I am sat in London without my iweb for a some days and would really like to get on with a bit of web stuff.
Question: is there anywhere in Apple Land where I can download iWeb
Question: can you confirm that the iweb programme will be on one of the disks that came with the machine?   (they are 100 miles away so I will have to wait, unless there is an easier way)
Sorry, rambling a bit.
Hope you can help out there
Thanks
Steve

The iWeb application was specifically created to be used with .Mac and then MobileMe and Apple withdrew support for iWeb several months ago, when it was announced that MobileMe would be no longer and would be replaced by iCloud. MobileMe ceased at the end of June this year and has been replaced by iCloud, that does not offer web hosting, so no need for iWeb.
Apple stopped selling iWeb in its stores several months ago and has withdrawn support for iWeb, so no, you won't find either iWeb or iDVD for sale in the Mac App Store because Apple no longer sells it.
You cannot download iWeb, so if you want iWeb, you will have to purchase the iLife 11 boxed set from Amazon and this contains iWeb 09 which is the latest version of iWeb. Apple does not sell this either.
If your Mac was running Snow Leopard, then it would have come with installation CD's, so yes, you should be able to re-load the whole of the iLife series, which includes iWeb, iDVD and iPhoto back onto your Mac running Mountain Lion. You did not need to make an additional purcahse of iPhoto from the Mac App Store - you could have re-loaded from these CD's. The only place you will get a refund is by contacting the Mac App Store. Nobody here can help you with that.
So if you want iWeb back, check to see if it is on you installation CD's - it should be if you have a Mac running Snow Leopard and put it back on your Mac from there. If not, then your only option is to purchase the iLife 11 boxed set from Amazon and you can load iWeb from there.
As Apple no longer supports iWeb and there is no MobileMe any longer, then there are unikely to be any further updates to the programme and nothing else will come along. You can still use the app though if you have it and it works with Mountain Lion, however, there may come a time when it won't work with future iOS updates, so it would pay you to look at the alternatives out there which are many and varied. Take a look at RapidWeaver, Sandvox, Freeway Pro/Express, Flux 4 etc. You can download free trials of most and some are for sale in the Mac App Store.
Also, please be advised that this is a user to user forum and everyone here who replies to you is a user, so you are not talking directly to Apple here.
Give Apple feedback directly by going to http://www.apple.com/feedback.

A replacement for the Quicksort function in the C++ library

Hi every one,
I'd like to introduce and share a new Triple State Quicksort algorithm which was the result of my research in sorting algorithms during the last few years. The new algorithm reduces the number of swaps to about two thirds (2/3) of classical Quicksort. A multitude
of other improvements are implemented. Test results against the std::sort() function shows an average of 43% improvement in speed throughout various input array types. It does this by trading space for performance at the price of n/2 temporary extra spaces.
The extra space is allocated automatically and efficiently in a way that reduces memory fragmentation and optimizes performance.
Triple State Algorithm
The classical way of doing Quicksort is as follows:
- Choose one element p. Called pivot. Try to make it close to the median.
- Divide the array into two parts. A lower (left) part that is all less than p. And a higher (right) part that is all greater than p.
- Recursively sort the left and right parts using the same method above.
- Stop recursion when a part reaches a size that can be trivially sorted.
The difference between the various implementations is in how they choose the pivot p, and where equal elements to the pivot are placed. There are several schemes as follows:
[ <=p | ? | >=p ]
[ =p | ? ]
[ <=p | =p | ? | >p ]
[ =p | p ] Then swap = part to middle at the end
[ =p | p | =p ] Then swap = parts to middle at the end
Where the goal (or the ideal goal) of the above schemes (at the end of a recursive stage) is to reach the following:
[ p ]
The above would allow exclusion of the =p part from further recursive calls thus reducing the number of comparisons. However, there is a difficulty in reaching the above scheme with minimal swaps. All previous implementation of Quicksort could not immediately
put =p elements in the middle using minimal swaps, first because p might not be in the perfect middle (i.e. median), second because we don’t know how many elements are in the =p part until we finish the current recursive stage.
The new Triple State method first enters a monitoring state 1 while comparing and swapping. Elements equal to p are immediately copied to the middle if they are not already there, following this scheme:
[ p ]
Then when either the left (<p) part or the right (>p) part meet the middle (=p) part, the algorithm will jump to one of two specialized states. One state handles the case for a relatively small =p part. And the other state handles the case for a relatively
large =p part. This method adapts to the nature of the input array better than the ordinary classical Quicksort.
Further reducing number of swaps
A typical quicksort loop scans from left, then scans from right. Then swaps. As follows:
while (l<=r)
while (ar[l]<p)
l++;
while (ar[r]>p)
r--;
if (l<r)
{ Swap(ar[l],ar[r]);
l++; r--;
else if (l==r)
{ l++; r--; break;
The Swap macro above does three copy operations:
Temp=ar[l]; ar[l]=ar[r]; ar[r]=temp;
There exists another method that will almost eliminate the need for that third temporary variable copy operation. By copying only the first ar[r] that is less than or equal to p, to the temp variable, we create an empty space in the array. Then we proceed scanning
from left to find the first ar[l] that is greater than or equal to p. Then copy ar[r]=ar[l]. Now the empty space is at ar[l]. We scan from right again then copy ar[l]=ar[r] and continue as such. As long as the temp variable hasn’t been copied back to the array,
the empty space will remain there juggling left and right. The following code snippet explains.
// Pre-scan from the right
while (ar[r]>p)
r--;
temp = ar[r];
// Main loop
while (l<r)
while (l<r && ar[l]<p)
l++;
if (l<r) ar[r--] = ar[l];
while (l<r && ar[r]>p)
r--;
if (l<r) ar[l++] = ar[r];
// After loop finishes, copy temp to left side
ar[r] = temp; l++;
if (temp==p) r--;
(For simplicity, the code above does not handle equal values efficiently. Refer to the complete code for the elaborate version).
This method is not new, a similar method has been used before (read: http://www.azillionmonkeys.com/qed/sort.html)
However it has a negative side effect on some common cases like nearly sorted or nearly reversed arrays causing undesirable shifting that renders it less efficient in those cases. However, when used with the Triple State algorithm combined with further common
cases handling, it eventually proves more efficient than the classical swapping approach.
Run time tests
Here are some test results, done on an i5 2.9Ghz with 6Gb of RAM. Sorting a random array of integers. Each test is repeated 5000 times. Times shown in milliseconds.
size std::sort() Triple State QuickSort
5000 2039 1609
6000 2412 1900
7000 2733 2220
8000 2993 2484
9000 3361 2778
10000 3591 3093
It gets even faster when used with other types of input or when the size of each element is large. The following test is done for random large arrays of up to 1000000 elements where each element size is 56 bytes. Test is repeated 25 times.
size std::sort() Triple State QuickSort
100000 1607 424
200000 3165 845
300000 4534 1287
400000 6461 1700
500000 7668 2123
600000 9794 2548
700000 10745 3001
800000 12343 3425
900000 13790 3865
1000000 15663 4348
Further extensive tests has been done following Jon Bentley’s framework of tests for the following input array types:
sawtooth: ar[i] = i % arange
random: ar[i] = GenRand() % arange + 1
stagger: ar[i] = (i* arange + i) % n
plateau: ar[i] = min(i, arange)
shuffle: ar[i] = rand()%arange? (j+=2): (k+=2)
I also add the following two input types, just to add a little torture:
Hill: ar[i] = min(i<(size>>1)? i:size-i,arange);
Organ Pipes: (see full code for details)
Where each case above is sorted then reordered in 6 deferent ways then sorted again after each reorder as follows:
Sorted, reversed, front half reversed, back half reversed, dithered, fort.
Note: GenRand() above is a certified random number generator based on Park-Miller method. This is to avoid any non-uniform behavior in C++ rand().
The complete test results can be found here:
http://solostuff.net/tsqsort/Tests_Percentage_Improvement_VC++.xls
or:
https://docs.google.com/spreadsheets/d/1wxNOAcuWT8CgFfaZzvjoX8x_WpusYQAlg0bXGWlLbzk/edit?usp=sharing
Theoretical Analysis
A Classical Quicksort algorithm performs less than 2n*ln(n) comparisons on the average (check JACEK CICHON’s paper) and less than 0.333n*ln(n) swaps on the average (check Wild and Nebel’s paper). Triple state will perform about the same number of comparisons
but with less swaps of about 0.222n*ln(n) in theory. In practice however, Triple State Quicksort will perform even less comparisons in large arrays because of a new 5 stage pivot selection algorithm that is used. Here is the detailed theoretical analysis:
http://solostuff.net/tsqsort/Asymptotic_analysis_of_Triple_State_Quicksort.pdf
Using SSE2 instruction set
SSE2 uses the 128bit sized XMM registers that can do memory copy operations in parallel since there are 8 registers of them. SSE2 is primarily used in speeding up copying large memory blocks in real-time graphics demanding applications.
In order to use SSE2, copied memory blocks have to be 16byte aligned. Triple State Quicksort will automatically detect if element size and the array starting address are 16byte aligned and if so, will switch to using SSE2 instructions for extra speedup. This
decision is made only once when the function is called so it has minor overhead.
Few other notes
- The standard C++ sorting function in almost all platforms religiously takes a “call back pointer” to a comparison function that the user/programmer provides. This is obviously for flexibility and to allow closed sourced libraries. Triple State
defaults to using a call back function. However, call back functions have bad overhead when called millions of times. Using inline/operator or macro based comparisons will greatly improve performance. An improvement of about 30% to 40% can be expected. Thus,
I seriously advise against using a call back function when ever possible. You can disable the call back function in my code by #undefining CALL_BACK precompiler directive.
- Like most other efficient implementations, Triple State switches to insertion sort for tiny arrays, whenever the size of a sub-part of the array is less than TINY_THRESH directive. This threshold is empirically chosen. I set it to 15. Increasing this
threshold will improve the speed when sorting nearly sorted and reversed arrays, or arrays that are concatenations of both cases (which are common). But will slow down sorting random or other types of arrays. To remedy this, I provide a dual threshold method
that can be enabled by #defining DUAL_THRESH directive. Once enabled, another threshold TINY_THRESH2 will be used which should be set lower than TINY_THRESH. I set it to 9. The algorithm is able to “guess” if the array or sub part of the array is already sorted
or reversed, and if so will use TINY_THRESH as it’s threshold, otherwise it will use the smaller threshold TINY_THRESH2. Notice that the “guessing” here is NOT fool proof, it can miss. So set both thresholds wisely.
- You can #define the RANDOM_SAMPLES precompiler directive to add randomness to the pivoting system to lower the chances of the worst case happening at a minor performance hit.
-When element size is very large (320 bytes or more). The function/algorithm uses a new “late swapping” method. This will auto create an internal array of pointers, sort the pointers array, then swap the original array elements to sorted order using minimal
swaps for a maximum of n/2 swaps. You can change the 320 bytes threshold with the LATE_SWAP_THRESH directive.
- The function provided here is optimized to the bone for performance. It is one monolithic piece of complex code that is ugly, and almost unreadable. Sorry about that, but inorder to achieve improved speed, I had to ignore common and good coding standards
a little. I don’t advise anyone to code like this, and I my self don’t. This is really a special case for sorting only. So please don’t trip if you see weird code, most of it have a good reason.
Finally, I would like to present the new function to Microsoft and the community for further investigation and possibly, inclusion in VC++ or any C++ library as a replacement for the sorting function.
You can find the complete VC++ project/code along with a minimal test program here:
http://solostuff.net/tsqsort/
Important: To fairly compare two sorting functions, both should either use or NOT use a call back function. If one uses and another doesn’t, then you will get unfair results, the one that doesn’t use a call back function will most likely win no matter how bad
it is!!
Ammar Muqaddas

Thanks for your interest.
Excuse my ignorance as I'm not sure what you meant by "1 of 5" optimization. Did you mean median of 5 ?
Regarding swapping pointers, yes it is common sense and rather common among programmers to swap pointers instead of swapping large data types, at the small price of indirect access to the actual data through the pointers.
However, there is a rather unobvious and quite terrible side effect of using this trick. After the pointer array is sorted, sequential (sorted) access to the actual data throughout the remaining of the program will suffer heavily because of cache misses.
Memory is being accessed randomly because the pointers still point to the unsorted data causing many many cache misses, which will render the program itself slow, although the sort was fast!!.
Multi-threaded qsort is a good idea in principle and easy to implement obviously because qsort itself is recursive. The thing is Multi-threaded qsort is actually just stealing CPU time from other cores that might be busy running other apps, this might slow
down other apps, which might not be ideal for servers. The thing researchers usually try to do is to do the improvement in the algorithm it self.
I Will try to look at your sorting code, lets see if I can compile it.

IWeb - looking for replacements for 'blog' & 'photos'

With a deep Sigh..., I am finally facing up to the fact that I must move my iWeb Websites to another hosting sight and deal with the loss of the intergrated blog & photo pages that come with iWeb. I kept hoping for a miracle but now I must get on with it. I would be grateful for advice from those who have dealt with this issue already.
My biggest concern is finding suitable replacements for the blog and photo galleries that can be embedded into iWeb having a matching 'look and feel'.
I have developed many robust (well of 50) websites with iWeb and they are active websites.   The websites have:
Custom layouts (i.e. not using the suppled defalut template)
Blog pages (used as 'News' entries)
Photo pages
iMovie
HTML Snipits
Many have been designed for use with charity events and recieve quite a bit of traffic (see stats below) before and during the event.
As for the hosting - we will use GoDaddy or other Domain Provide with Hosting services.   We have already moved some of the more less complicated websites over.
I love iWeb (I know it has it's faults and I have probably pushed it to it's limits but it has handled it well). I have tried looking at other products like Rapidweaver & Freeway Pro (Dreamweaver would be out of the question for me as I'm not a programmer - I can deal with some basic html code for snippets and such - but that's my limit). My partner has begun looking at Wordpress. However, the biggest drawback from what I've seen from these other products is that I can't duplicate the freedom and ease of designing a template/layout the way I want it. I have tried to duplicate a website I have done in iWeb and I simply can't do it with these other products (at least without a great deal of work - if at all).
So, I wish to continue using iWeb for the main website desgin but desparately need to find good replacements for the blog and photo galleries to move over my existing websites.
Please HELP!
This is my 1st time up on the forums so I do apologise if this has been dealt with before. In my searches - I just haven't really found an answer which is why I'm submitting this question.
Many thanks, MichelleSC
P.S. I have been an Apple user since Apple began and have always raved about their products.   This is the 1st time I have been frustration with Apple. I really wish they would continue to develop iWeb and keep Mobileme.

Do you have visitors post comments to your blog or it is one the only includes your entries? If it's the atter then you can continue to use the iWeb blog. If you currently have visitors comment on the entires you will have to move to a new blogging system, one of those suggested by Ethmoid and Jeff.
As for photo albums I've just run across a new site called ZangZig which offers albums similar to MobileMe galleries with most of it's features plus one that MMe didn't have. The capability of selling your photos.
One convenient feature of it is that it can move/copy photos from your existing MMe galleries as well as your iPhoto library and other sources:
As for for iWeb can do after MMe is gone read the following:
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
Currently if the site is published directly from iWeb to the 3rd party server the RSS feed and slideshow subscription features will work. However, if the site is first published to a folder on the hard drive and then uploaded to the sever with a 3rd party FTP client those two features will be broken.
All of these features can be replaced with 3rd party options.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: iW14 - Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued. There's a link in the tutorial to download the file that one needs to be edited and replaced in existing slideshows and in the iWeb application for future slideshows. Once replaced in the application it's back to life as usual for iWeb.
OT

Photo sharing replacement for mobileme galleries

HI all,
I'm sure there are others out there, like me, who built their entire gallery strategy on using Apple's "mobileme galleries," and now you have had to find a replacement for that becuase as we all know....There will be no replacement for Galleries in iCloud, you'll need to find another service to host your photos.
So..what have you people done to solve the issue.
I'd love to know. I am still using iWeb and have a host for my site, but I need something to get some galleries on display. I used to love using the "mobileme galleries" and really miss that so much. It was so elegant and simple.
If there are any suggestions you can share, please fire away.
Thanks in advance, and so long for now, TOM

The following if from iCloud: Photo Stream FAQ
What resolution are My Photo Stream photos?
On your Mac or PC, your photos are downloaded and stored in full resolution. On your iPhone, iPad, iPod touch, and Apple TV, your Photo Stream photos are delivered in a device-optimized resolution that speeds downloads and saves storage space. While actual dimensions will vary, an optimized version of a photo taken by a standard point-and-shoot camera will have a 2048 x 1536 pixel resolution when pushed to your devices. Panoramic photos can be up to 5400 pixels wide.

Word Replacements for Non- English Characters

Hi
Does anyone have an idea on implementing Word Replacements for non- english characters in TCA- DQM 11i.
We are trying to identify, capture and cleanse common accented characters like à, â , ê
However, the default language for replacement is American English , So even if we add these in the existing lists it will not take any effect
Is creating a new Word replacement list for every language the solution ?? any patch recommendations???
Thanks in advance

It seems that this is an issue that has popped up in various forums before, here's one example from last year:
http://forum.java.sun.com/thread.jspa?forumID=16&threadID=490722
This entry has some suggestions for handling mnemonics in resource bundles, and they would take care of translated mnemonics - as long as the translated values are restricted to the values contained in the VK_XXX keycodes.
And since those values are basically the English (ASCII) character set + a bunch of function keys, it doesn't solve the original problem - how to specify mnemonics that are not part of the English character set. The more I look at this I don't really understand the reason for making setMnemonic (char mnemonic) obsolete and making setMnemonic (int mnemonic) the default. If anything this has made the method more difficult to use.
I also don't understand the statement in the API about setMnemonic (char mnemonic):
"This method is only designed to handle character values which fall between 'a' and 'z' or 'A' and 'Z'."
If the type is "char", why would the character values be restricted to values between 'a' and 'z' or 'A' and 'Z'? I understand the need for the value to be restricted to one keystroke (eliminating the possibility of using ideographic characters), but why make it impossible to use all the Latin-1 and Latin-2 characters, for instance? (and is that in fact the case?) It is established practice on other platforms to be able to use characters such as '�', '�' and '�', for instance.
And if changes were made, why not enable the simple way of specifying a mnemonic that other platforms have implemented, by adding an '&' in front of the character?
Sorry if this disintegrated into a rant - didn't mean to... :-) I'm sure there must be good reasons for the changes, would love to understand them.

Time stamp from DV capture -- replacement for dvdate?

In CS3, there is a plugin dvdate that can extract the date/time from captured DV avi file and overlay this information.
In CS4, this plugin no longer works (crash) and author simply said it does not work.
Is there any replacement for dvdate? Or CS4 now supports it natively?
Thanks!

I don't really understand why Adobe has to break such a basic function in CS4.
Does DVMP work with Premiere? It does not look like a plugin. There is a feature to fix start timecode. However, the Premiere CS4 Timecode effect only shows time, not date. So it does not seem to be an easy workaround.

Requesting guidance on repair versus replace for iBook G4 (2005)

I'm looking for some guidance in deciding to upgrade/repair for my iBook G4, operating Mac OS X 10.4.11. I've gotten to the point where I don't seem to be able to run more than one application at a time (for example be online and listen to music at the same time), download more photos into iPhoto (get an outa short term memory message), or watch most video online. It seems that I can't get the most recent versions of some applications as well, for example can't upgrade to the most recent version of flash player, which rules out online TV. I'm not knowledgeable enough to be able to tell if I should just give up on this old workhorse or not. I'd be totally willing to spend $200 ish and have someone clean things up, delete useless stuff, etc, but I don't even know if that is worth it and I'd just be throwing money away. The only other problems it has is lousy battery (can't really be unplugged for more than 5 minutes) but I can live with that for my purposes. I'm open to suggestions about how to troubleshoot, ie decision matrix for the mostly clueless. Thanks.

Hi, and welcome to Apple Support Communities.
I would strongly recommend upgrading to a newer MacBook or MacBook Pro.
Chances are the hard drive is full (or nearly so), and also getting old, since the very newest iBook is over five years old at this point.
If you start replacing things, you could soon approach the cost of a newer computer.

Any word on a replacement for mavericks

I'm wondering if anyone has heard any word about a replacement for Mavericks. Even after this long using it I still think it is a really poor os. If it were not such a chore I woud revert back to Mountain lion or Snow Leopard.

No one here has any idea of when Apple will release the next version of OS X.
I have found Mavericks to be significatantly better then its preciessors.
Maybe if you tell us why you think Mavericks is worst, we might be able to help you.
Allan

Replacement for iTunes

I recently, after using iTunes for years, started having big problems with iTunes 7.7.1. Songs are stopping and starting (to update info?), when just picking a new song it hangs up for a few seconds, and in general iTunes seems to be hogging all of the CPU. After exhausting all possibilities, I reinstalled my system, installed iTunes 7.6.2, and re-imported my 160 GB library.
This did not fix my problem. If I play any of these files in the preview window they do not skip. iTunes is really a pathetic JOKE!
Does anyone know of a good replacement for iTunes. I write music for a living, so setting up playlists and cross-referencing etc. is a very important for me professionally.
Thanks.

Hi William.
Just to add to the equasion. I am running Tiger 10.4.11 and have installed the latest iTunes update. I've been lucky with the new update, so I can't speak to that. But before and since the update I have never had any issues with iTunes using Tiger. If I had to pick, my guess would be the update (or backdate) is causing the problems. Here is the link to iTunes support:
http://www.apple.com/support/itunes/store/browser/
I hope this helps.
mwn
Message was edited by: much wiser now

Is my Apple-Issued Replacement for a Verizon-Issued iPhone 5 Unlocked?

Due to a water accident I went to Apple and they sold me a replacement for my Verizon-Issued iPhone 5. If I understand correctly, Verizon's iPhone 5 was shipped to customers unlocked. Is the phone that I got from Apple as a replacement (and I was told that I was getting exactly what I already had) unlocked? I really need to know as I am about to go overseas.
Thanks

Yes, the GSM side of your replacement phone is unlocked.

Is Prelude really a replacement for OnLocation?

Similar Messages

Maybe you are looking for