Is Premier Pro available as a 'stand alone' without CC?

Is Premier Pro available as a stand alone product that can be used without going to the cloud?

I believe one can still purchase the CS6 version and license ... which is the last pre-CC version.
Note, there is some confusion about Adobe's "Cloud" concept. The software is all fully downloaded & installed on your machine, it just checks in every so often to make sure the license is "current" ... and is paid by monthly or yearly subscription-type payments. Non of your files are actually uploaded unless you choose to take advantage of say, uploading your workspace settings to your account "on the cloud" so you can sit down at another CC computer, and immediately have your workspace available on it.
Neil

Similar Messages

  • Will Compressor 4 run as a stand alone without FCPX?

    Will Compressor 4 run as a stand alone without FCPX?
    I use FCP 7.0.3 and have COmpressor 3. I wondered if Compressor 4 would run on my MacPro and would I see any improvement over Compressor 3?
    4 isn't tied down to FCPX I hope.
    Thoughts?
    Thanks!
    Steve

    Unless you need some special encoding that compressor 3.5 can't do, I would not "upgrade" to version 4.  I bought the new version after FCP X hosed my version of 3.5 thinking it would solve my problem.  It only created more problems for me. (BTW, I was subsequently able to resurrect the 3.5 version with compressor repair and doing a bunch of other stuff!)  The new version has Apple Qmaster incorporated into it which on the surface looks like an advantage.  But I have not been able to get it to form a quick cluster despite numerous attempts.  I have "spoken" to Russ on the forum here and he can't figure it out.  I have spoken several times to a seemingly knowlegable Apple care  specialist- they can reproduce my problem but they can't fix it  either.  Consequently, encoding is much slower in Compressor  4 vs 3.  If compressor 3 is doing what you need it to do, stick with it.  If it ain't broke, don't fix it!!!!!
    Steve

  • I am looking to buy Final Cut Pro X is this stand alone App.?

    I have Final Cut 2 Studio Witch it has Motion, Live, Compressor, sound,dvd maker My question is is Final Cut Pro X Comes with it or if is Compatible With my Older versions Programs (of Final cut Pro 6) or is this a Stand alone app. My computer is a Mac Pro Early 2008 3.2 Hrtz 8 Cores.

    So that means I can still use my older version (Final Cut Studio 2 ) and use it just in case the Final Cut X gets to complicate is cheaper than before so I can get Motion 5 no problem. thanks

  • HP 820MFP can scanner be used as stand alone without pc?

    Hello,
      We have a HP Designjet 820 MFP system.  The computer and printer has now died and will be replaced with a newer model.  I am familure with these scanners being made by Contex and resold through Oce Idel and HP.
      Is it possibile to use this scanner without the supplied HP PC, as stand alone?  I have tried the Context wide system connecting the scanner using the firewire cable.  The system does not have the drivers correct.  If i had the drivers i would be able to use the scanner we bought and paid for. 
      The scanner is still good shape and low useage and in good shape,  still supoorted by the parent vendor, simular models being sold as stand alone for over 10k, it would be a shame to have to junk this unit out.
    Thansk for your help.
    Ed

    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • WaveBurner available as a stand-alone app.?

    Is WaveBurner available independently, or is it bundled with Logic Pro?
    Thanks.
    -ptfigg.

    It is
    bundled with Logic Pro
    Martin

  • Why is Forms/Reports 6i not available as a stand alone product?

    Mr. Regis Louis (Senior Group Manager/Oracle Forms Product Management),
    thank you for your posting to my original question/suggestion. Unfortunately, I can not say that it was an answer to my original question (or suggestion). Therefore I am opening a new thread as you suggested.
    Here it goes:
    I know that you are not going to change your strategy for the new product/s (9iDS and 9iAS). My question or suggestion was simply for the forms/reports developer 6i and marketing it as a separate product. By "marketing" I meant that making the forms/reports developer 6i easier to obtain and deploy for the end users (ESPECIALLY from the licensing point of view). You did NOT answer/mention any of the licensing issues/difficulties. Could you please answer the following questions:
    1. Can we tell our customers to download form/reports developer 6i from OTN?
    2. I was told by Oracle Partnership that our customers need to obtain an iDS license for forms/reports developer 6i to be able to run our client/server application which is developed by using forms/reports developer 6i. If the customers do NOT need other tools/programs that iDS license covers, why not making
    forms/reports developer 6i a separate product (like JDeveloper 9i) so that the customers will pay ONLY for the forms/reports developer 6i? Why not paying $995 (like JDeveloper 9i) versus $5000 (for iDS license)?
    3. Why not having a freely downloadable RUNTIME ONLY option (via OTN) - which will eliminate the licensing problems given that the we (the developers) are properly licensed for the forms/reports developer 6i?
    I hope you will answer these questions without feeling that you should justify your decision for 9iDS and 9iAS combination. Let me emphasize again here, I am not interested in 9iDS - this is a for 6i only.
    If you can not answer any licensing related questions, could you please forward it to the proper people at Oracle. There must be someone at Oracle who can say "yes we can do this or no we do not want to do it." Licensing for forms/reports developer 6i is a total mess and I want someone to fix it. I don't care about 9iDS and your push for 9iAS. This is for 6i ONLY.
    Best regards

    Zaffer,
    Thank you to have created this new thread to address this specific question.
    1. Can we tell our customers to download form/reports developer 6i from OTN? Yes, You can tell your customers to download the software from OTN, as long as they accept the OTN Licence terms.
    2. I was told by Oracle Partnership that our customers need to obtain an iDS license for forms/reports
    developer 6i to be able to run our client/server application which is developed by using forms/reports
    developer 6i. If the customers do NOT need other tools/programs that iDS license covers, why not making
    forms/reports developer 6i a separate product (like JDeveloper 9i) so that the customers will pay ONLY for
    the forms/reports developer 6i? Why not paying $995 (like JDeveloper 9i) versus $5000 (for iDS license)? The Forms/Reports runtime Client/Server is free. If your customers are only using the Client/Server runtime, there is no need to purchase iDS.
    3. Why not having a freely downloadable RUNTIME ONLY option (via OTN) - which will eliminate the licensing > problems given that the we (the developers) are properly licensed for the forms/reports developer 6i? When installing Forms/Reports 6i downloaded from OTN, you already have the option, when doing a custom install, to install the client/server runtime only. As I mention in the previous point, the deployment with Forms/reports 6i in client/server is already free.
    I hope this answers your question.
    Thank you for your feedback.
    Regis Louis
    Forms Product Management

  • Stand alone scan to email w/out HP servers

      I have a 7520 that I use scan to email often on however at least once every month I have to stop web services and re load in order to conect to the hp server.   I know the 8600 pro models sends the scan directly without using the HP servers. What are the exact models that work stand alone without the HP eprint server?  A lazer all in one would not be out of the question either.  I just get tired of always having to start over with web services and I keep losing my hpeprint email addresses.
    Thanks

    Anyone ???

  • Aggregator as a stand-alone product?

    Does anyone know if the Aggregator for Captivate is available as a stand-alone product? I have Cap 5.5 with a mulitiple sco project. I do not have the e-learning suite so I cannot aggregate internally and I do not have Captivate 4, which has the aggregator. Any suggestions?

    I think you may have the Aggregator confused with the Multi-SCORM Packager tool.
    Aggregator comes with Cp5x standalone.  The Multi-SCORM Packager only comes with either Cp4 or the E-Learning Suites.  You cannot purchase it as a standalone product from Adobe.  I am on record as stating that I thought this tool should have remained a default part of the Captivate installation (as it was before Cp5x).  However, that's Adobe's prerogative.
    If you do not have access to Multi-SCORM Packager, Google for information about RELOAD Editor.  That might provide an alternative solution.

  • How best to INSTALL my downloaded purchase of Lightroom 5 stand-alone ver. (NON-CreativeCloud) on my Macbook Pro OSX 10.9.5 ?

    So, I’ve just downloaded my purchase of Lightroom Photoshop 5. I bought it via Adobe.com and it’s the full desktop version, stand-alone software version.
    Important FYI:  Please note that I bought the non-CC Lr program to download.
    Question: How do I properly INSTALL it after downloading it onto my Macbook Pro using OSX (latest Mavericks ver. 10.9.5) ??
    I can only find installation instructions for Lr CC and mobile but not for the full, non-CC licensed desktop version which is what I have!
    Perhaps the above is the same step-by-step install process as my said Lr 5 but for whatever reason Adobe doesn’t say so anywhere that I’ve been able to find.
    Any help?
    T.I.A.!
    P.S. FWIW, I’m mostly asking because I’m just afraid to mess up something or install it wrong or in wrong place; I want to make sure I do it correctly so not to corrupt the installation or whatever, even though I’m fairly sure I know how. Double-checking for my own confidences/sanity…

    download the latest lr and install using your serial number,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Stand alone isight still available?

    Hello - I recently purchased a mac pro and was considering picking up a stand alone isight camera. Unfortunately I can't seem to find it listed on the online store - did apple stop making the stand alone model?

    never mind I found a post indicating it's disappeared.

  • Premier Pro, After Effects will not download, all other Apps available

    Running Windows Vista, SP2, 32-bit, Mozilla Firefox latest updates.
    At creative.adobe.com/apps, click on Pr or Ae "download." Neither download works.
    The installation window for AAManager.exe pops up, ask to "Run" or cancel.  Click on
    "Run.  It runs, initializes and AAM appears with 14 of 16 apps. 
    Installed a few Apps that are available. Prelude works fine after install.  So, it appears to be App
    specific.   
    Premier Pro and After Effects do not appear in AAM.  Cannot install as a result.
    Running a tight deadline. Appreciate help to quickly resolve this issue. 
    Zero error messages generated.  Running CS Complete subscription service.

    Yourrearipoff actually Mylenium is correct.  I would recommend reviewing Not all apps displayed for download | Creative Cloud desktop app which discusses the need for a 64-bit OS as well as meeting the system requirements in order to download and install applications.  A complete list of system requirements can be found at System requirements | Creative Cloud.

  • I need Encore CS6 and it is not available on Creative Cloud.  Neither is Premier Pro CS6 which supposedly installs Encore CS6.  I need to burn a DVD from my mpeg4 output from Premier Pro CC2014.  What should I do?

    I need Encore CS6 and it is not available on Creative Cloud.  Neither is Premier Pro CS6 which supposedly installs Encore CS6.  I need to burn a DVD from my mpeg4 output from Premier Pro CC2014.  What should I do?

    You should probably post your question about burning a DVD from Premiere Pro in the Premiere Pro forum
    Here is a link to info regrding getting CS6 applicarions thru the Cloud with a full subscription...
    Get CS6 Apps from Cloud Subscription:
    Download previous versions of Adobe Creative applications -
    http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html

  • 2008 stand-alone server acs software available?

      I am using acs 4.2 on a windows 2003 server sp2 in my current network. The network is being replaced and I am being given a windows 2008 software/server and to build the app. I am  a little confused as too the available software. The only 5.4 acs software I see is for the appliance and vmware. What software is there available for standalone servers that in not end-of-life ?  Or do I use acs 4.2 on the standalone server and upgrade it all the way to 5.4. I would think they would have a base package at one of the 5.x levels..Any information would be appreciated

    Hi ,
       I would like to inform you about the following things:
    1. ACS 5.x cannot be installed on the widnows server as ACS 4.x
    2. ACS 5.x can only be installed on the vmware (Linux based) or comes as an applaince.
    3. ACS 4.x is a windows based box and ACS 5.x is a linux based appliance/VMware
    4. You can configure vmware or an appliance as a stand alone ACS5.x box.
    5.ACS 4.2.1.15 is available till now and is not end of life yet.
    6. You can upgrade the ACS 4.2.0.124 to 4.2.1.15, However its not compatible with windows 2008 r2 box.
    7.You cannot upgrade the ACS 4.2 to ACS 5.4, You will have to purchase a seprate license for ACS 5.4 and then you can migrate the database from 4.2 to 5.4
    Regards
    Minakshi (Do rate helpful posts)

  • UCCX stand alone to high availability

    I have a production UCCX signle server deployment on 7.0(1). I am going to upgrade this to high availability and just needed to check out the procedure to upgrade the existing production server to the first node in HA. My 2nd server is already built, with UCCX and SQL 2000 so it is ready to go. Upon reading the upgrade guide it seems like all I need to do is upgrade SQL and then apply the HA license (it is sort of vague I feel for something this crucial). So you do not need to re-run the install to define first node?
    Any opinion (or link to a more detailed document) will be appreciated.

    I know this is an old post but for the sake of the community the answer is yes. if it was set up as a
    stand alone node to begin with it can be changed to first node using the cet.bat tool to change the startup behavior of the appadmin page as described here.
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note091
    86a00805a7acc.shtml
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    1. On the CRS server, go to C:\Program Files\wfavvid\, and double-click the cet.bat file.
    2. Click No when the warningappears.
    3. Right-click the AppAdminSetupConfig object in the left pane, and select the option Create.
    4. Click OK.
    5 .In the new window, click the com.cisco.crs.cluster.config.AppAdminSetupConfig tab.
    6. Choose Fresh Install from the drop-down list in order to change the value for Setup  State.
    7. Click OK
    8. After you create the AppAdminSetupConfig object, log in with the user name  Administrator and password ciscocisco, and then run the setup again.
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    this will allow you to change the node from stand alone to first node  by re-running the initial UCCX setup wizard.
    Don Mynes

  • HT4362 ATV1 has sync -- where it is stand alone for playback,  is this feature available in atv2?

    ATV1 has sync -- once done it is stand alone for playback,  is this feature available in atv2?

    No.

Maybe you are looking for