Is Premiere Elements Compatible with the Canon XH A1?

I have Premiere Elements 3.02 and a powerful computer with 4GB of ram. I want to make sure the Canon XH A1 is Compatible with Premiere Elements before buying.

As an HDV, tape-based camcorder, it should work beautifully, whether you capture the video as HDV or MiniDV.
Canons are a popular high-end brand for Premiere Elements users. The HV20 is held is especially high regard.

Similar Messages

  • HT4106 Is the IPad connector kit compatible with the Canon Eos 350D digital camera, I can't get it to work. Comes up as device not supported

    is the  camera connector kit compatible with the Canon EOS 350D digital camera, as I can get it to work

    Check what you've got 'Communications' set to on the camera's settings - it needs to be 'Print/PTP', not 'Normal' 'Normal' to 'PTP' :

  • I can only install adobe photoshop elements 12 but not able to install adobe premiere element 12 with the serial number to my macbook

    why I can only install adobe photoshop elements 12 but not able to install adobe premiere elements 12 with the same serial number to my macbook?
    Photoshop Elements

    PSE and PRE have different serial numbers. If you bought both programs you should have two separate serial numbers.

  • Is the Bower SFD926C Dedicated Digital. Guide Number 125 fully Compatible with the Canon 600D

    I want a Camera Mounted and Wireless Speedlite compatible with my Canon 600d 
    Is the Bower SFD926C Dedicated Digital Flash for Canon SLR Cameras, Guide Number 125 fully Compatible with the Canon 600D ?
    http://www.adorama.com/BOWSFD926C.html
    I am going to buy this for 89 dollars.
    are ther better Options with similar Price ?
    thanks for the replies

    Personaly I would not buy one but for $89 bucks, why not?
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • Is the trial of Premiere Elements compatible with Windows 8?

    Is theTrial pack for Adobe Premier elements 11 compatible with Windows 8

    Hi reenamath
    Yes it is ...
    Windows
    2GHz or faster processor with SSE2 support; dual-core processor required for HDV or AVCHD editing and Blu-ray or AVCHD export
    Microsoft® Windows® XP with Service Pack 3, Windows Media Center, Windows Vista® (all applications run native on 32-bit operating systems and in 32-bit compatibility mode on 64-bit operating systems), Windows 7, or Windows 8 (Adobe® Premiere® Elements Editor runs native on 32-bit and 64-bit operating systems; all other applications run native on 32-bit operating systems and in 32-bit compatibility mode on 64-bit operating systems)
    2GB of RAM
    7GB of available hard‐disk space to install applications; additional 5GB to install content
    Graphics card with the latest updated drivers
    Color monitor with 16-bit color video card
    1024x768 display resolution
    Microsoft DirectX 9 or 10 compatible sound and display driver
    DVD‐ROM drive (compatible DVD burner required to burn DVDs; compatible Blu‐ray burner required to burn Blu‐ray discs)
    DV/i.LINK/FireWire/IEEE 1394 interface to connect a Digital 8 DV camcorder
    QuickTime 7 software
    Windows Media Player (required if importing/exporting Windows Media formats)
    Internet connection required for Internet-based services*
    Please See the System Requirement in the below link : http://www.adobe.com/products/photoshop-premiere-elements/tech-specs.html

  • Does anyone have problems upgrading Premiere Elements 12 with the latest update that will fix bugs and improve the stability of the program?

    Hi there!
    I can´t update my software, it starts to download and everything but when it is supposed to start the update I only get an error message.
    The update is to the 12.1 version of the software and with a size of 67 MB.
    The error message that I get is like follows:
    "Adobe Premiere Elements 12.1-update
    An error has occurred during the installation of this update. Cancel and try again later. Error code: U44M1I210"
    Can anyone help me to find a solution of this problem please?
    I run 64-bit version of Windows 7. (And I have the 64-bit version of Premiere Elements 12)
    Best regards!

    lily
    Please look at the following possible Premiere Elements 12 solution for the 12 to 12.1 Update.
    I am assuming that you are using Windows 7, 8, or 8.1 64 bit. If others, please supply more details.
    Do you have Premiere CC or any Creative Cloud products on this same computer?
    Right click the Premiere Elements 12 desktop icon and select Run As Administrator. Also, assure that you are running your
    computer and Premiere Elements from a User Account with Administrative Privileges.
    Disable the antivirus and in particular the firewall(s).
    Then open Premiere Elements 12 to Expert workspace Help Menu/Update and determine if you can Update from 12 to 12.1.
    Thank you.
    ATR

  • Is Premiere Elements compatible with Premiere Pro CS6?

    We are having trouble opening up files in Elements that was saved in Pro.
    Any advice?
    Thanks,

    Programs are not compatible (either way).

  • I was running out of hard drive space so I uninstalled Adobe Premiere Elements 13 with the intention of re-downloading it on my external hard drive. But now I have less space on my hard drive, and I can't find it on my external.

    Can anyone help me?

    If you moved your iTunes library by simply copying it to another drive, you may not be able to access your music even if you reconnect to that library, you may get a lot of "not found" errors because the music is not where the library thinks it should be. First thing to do is put it back where it was.  Then reconnect it. Then follow the steps in this link:
    http://support.apple.com/kb/HT1364

  • Is Premiere Pro compatible with "all" Canon XA20's native recording formats (MPEG4-AVC / H.264)?

    NTSC:
    AVCHD - 1080: 59.94P / 59.94i / PF29.97 / 23.98P
    MP4 - 1080: 59.94P / 29.97P / 23.98P; 720 and 360: 29.97P / 23.98P

    Yes. There should be no issues handling these files in Premiere Pro CC.
    Best,
    Peter Garaway
    Adobe
    Premiere Pro

  • Adobe premiere elements works with adobe photoshop elements 12?

    I use adobe photoshop elements 12, now I would like to add adobe premiere elements 13; are the two programs correctly working together?
    Romanon thanks you for an answer.

    romanom
    Photoshop Elements 12 and Premiere Elements 13 are standalone products. Each comes with an Elements Organizer, Photoshop Elements 12 with the Elements Organizer 12 and Premiere Elements 13 with the Elements Organizer 13.
    When a matching version set of the two is installed on the same computer, the Photoshop Elements and Premiere Elements share the same Elements Organizer.
    Consequently, you are going to run into a loss of integration perks by mismatching the combo.
    One example...slideshows created in the Elements Organizer 12 can be gotten into the Elements Organizer 13, but only after accepting that 13 will change the slideshow format into its new format rather than retain the format of the pre-13 Slideshow Editor.
    Please supply more details if you have specific Photoshop Elements Premiere Elements requirements.
    Thank you.
    ATR

  • E-mailed File "The project is not compatible with the current version of Premiere Elements"

    I have Version 12 on a PC.
    My friend has Version 12 on a MAC.
    E-mailed him a file.
    He could not open, and a message box popped up:   "The project is not compatible with the current version of Premiere Elements".
    Could someone kindly asssit, this does not make sense as to why it is not opening, since both computers are using the same version.
    Thank you,
    Ben
    [email protected]

    Ben
    As said, you cannot open a Premiere Elements 12 Windows project file (named project.prel) in Premiere Elements 12 Mac. And vice versa.
    Details
    Given that your source is imported into a Premiere Elements 12 Windows project and placed on its Timeline for edit. That Timeline content cannot get out of the program without export. Export choices are found in the Publish+Share section of the program.
    In your case, you want to take the Timeline content of Premiere Elements 12 Windows and export it to a format with which Premiere Elements 12 Mac supports (look at .mov or .mp4). In this regard, in Premiere Elements 12 Windows look at Publish+Share/Computer/AVCHD and one of its .mp4 presets or Publish+Share/Computer/QuickTime and one of its .mov presets (suggested H.264 video codec).
    Those exports will be saved to the computer hard drive of the Windows computer. Then email the .mov or .mp4 file (beforehand, check the
    email carrier's specification for that). Depending on the circumstances, you could transfer the file to a USB Flash Drive for the sharing.
    Remember, sharing the .mov and .mp4 involves "whole" video. Depending on the edits, the video may need to be cut by the receipent. You are not dealing with the project file. The story would be different if this sharing and editing is done from Premiere Elements Windows to Premiere Elements Windows. And, if that were the case, then you would have to assure that the source media of the project traveled with the project file. (See Project Archiver feature of the program.)
    That is a rough sketch of the situation. I can fine tune the details further if necessary.
    Please review and consider.
    Thanks.
    ATR

  • When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks :)

    When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks

    Let's first try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

    Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

  • Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 but when I connect my camera a message appears telling it's not compatible with the operating system?

    Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 and when I have checked for software updates there are none available.  I've downloaded the Canon software, connected to my mac via the cable and followed the instructions in the manual.  Sadly I just get a message saying it's not compatible with the operating system.  I've tried inserting the memory card into the mac to and it doesn't seem to see it.  Can anyone help please?

    Camera RAW ≠ Camera driver, the RAW update is for the .CR2 canon raw image file (in your case) compatibility.
    What happens when you try to import photos using Image Capture or iPhoto?
    Can you take a screenshot of the error message?
    I always prefer and recommend using memory card import over using the camera.

  • I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren

    en

    I´ll check the messages. Elements 4.0.
    Peter
    9 dec 2014 kl. 18.44 skrev Jeff A Wright:
    I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    Peter Lindgren do you receive any specific error messages when you attempt to install Photoshop 7 or Photoshop Elements?  What version of Photoshop Elements are you installing?
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6999366#6999366 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6999366#6999366
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Maybe you are looking for

  • How to delete duplicate items in SQ01 output

    Hi,    I created a query to extracted fixed asset from table ANLZ join ANLA, ANLZ for legacy fixed asset upload.  But in the output list , every fixed asset line item is output by triple line items. How can I do to delete the duplicate items when out

  • A very simple database system with JSON

    If we need to store some data in a database, but without the need of advanced SQL features, can we use this scheme (written here in Javascript / node.js) : // the DB will be in RAM ! var myDb = {}; // read DB from disk if file exists try { myDb = JSO

  • [WRT350N] NAT is Moderate, how can it be Open?

    For Halo 3 it seems that the NAT really should be open rather than Moderate or Strict. I've forwarded the ports asked by xbox live (88 UDP and 3074 TCP/UDP) and I've even tried adding it to the DMZ, but no joy. The NAT reports as "Moderate" when XBL

  • Form 6i not support this SELECT sys_context('userenv', 'host') from dual;

    hi master sir i use this command for user ip address SELECT sys_context('userenv', 'host'), sys_context('userenv', 'ip_address') FROM dual; BUT form6i give me this error Error 201 at line 26, column 12 Identifier ‘SYS_CONTEXT’ must be declared please

  • Cant install python modules.

    Hi, i have just started using berkeley db xml, and i'd like to use the python bindings ('im more cumfortable with python rather than java or c++). But, when i follow the procedure (as in README in dbxml-2.5.13/dbxml/src/python/bsddb3-4.8.0/README) i