IS Prime DCNM support for 2960 switches

Hi All,
There is a requirement for a NMS solution, Solution must have a single dashboard
but in the netwroks i am having 2960s, N2K, N5K, N7K, in order to mange this data-center network
do I need to quoted for Cisco LMS and DCNM or LMS is enough

The most comprehensive single product solution for those set of devices would be LMS. It does have limitations in managing the User Tracking, VLAN (provisioning primarily) and SAN aspects of the data center switches. Note Nexus 2ks are not separately managed, but rather viewed as an integral part of their controlling 7k or 5k.
LMS Catalyst 2960 support described here.
LMS Nexus support described here.
DCNM is not really designed for IOS-based devices. It has some very limited support for the Catalyst 6500 but other than that it is primarily focued on the NX-OS-based data center products. See the DCNM Release Compatibility Matrix for more details. (And add the DCNM 6.1 release notes updates.)

Similar Messages

IOS for 2960 switch

How i can download IOS for 2960 switch...?

No. I have not Service contact?
A valid Cisco Service Contract is needed to download IOS from Cisco website. You may need to talk to your authorized Cisco reseller or the vendor who sold you the switch.

Does Cisco Prime have support for HP Access Points?

I am trying to sell a solution to a client with dozens of large warehouses with a large existing HP wireless solution. I want to sell them on a Cisco wireless solution involving Prime to manage/monitor their current HP Access Points while we do a phased replacement to Cisco WLC and APs.
I cannot find listed in the documentation whether Cisco Prime has support for the HP access points though. I see it has 'some' support listed for some Aruba controllers, but not anything else.

I am trying to sell a solution to a client with dozens of large warehouses with a large existing HP wireless solution. I want to sell them on a Cisco wireless solution involving Prime to manage/monitor their current HP Access Points while we do a phased replacement to Cisco WLC and APs.
Prime will only support products with a "Cisco" logo.
Note: Prime 2.2 will start supporting Meraki product.

Does Cisco NAC support for HP Switches

Dear all,
the existing network has HP switches , is there any way i can deploy Cisco NAC solution here ?
Pls revert .
thanks ,

Cisco NAC has lots of limitations, and surly this is one of them. But while I respect the fact that cisco will not support NAC on HP switches. It can work. And it will perform just fine, once you understand “Cisco NAC” and able to configure it for the first time, you will be able to support it without the need of TAC.
The idea is that Cisco NAC sends commands to the switches on the network to apply specific access list or Vlan changes, since Cisco can only speak Cisco, it does not know how to tell other switches to do that. . The work around is that you would have the NAC running in in-line mode on your network, yes this will introduce a bottleneck, but that is the only way to do it. The NAC then will look at the traffic based on the MAC or IP and apply set of policies depending on the source or the destinations.
Please do your research and look at other NAC solutions before you decide the best vendor to go with.

DCNM support for Nexus

1) As per release notes DCNM 4.2 we cannot perform software/configuration/power management for Cisco Nexus 2k and 5k from DCNM.
Is there some other solution with which we carry out above task
2) Also can DCNM manage QOS and Multicasting on Nexus 7k/5k/2k or not

I note Nexus syslogs are still not supported in CS-MARS v6.1.x Revised: January 27, 2011
With CS-MARS product now end of sale June 2011, should I hold out any hope of a fix before end of Software Maint in June 2012 ?

Linux Fencing Support for iSCSI switches...

Do any of the Cisco iSCSI network storage switches support Linux fencing agents? If so, which ones.
Thanks,
-Rich

There is no fencing control (port blocking) capabilities on the MDS9000 iSCSI interfaces. Port blocking control by a fencing agent is not available on the Line Card FC ports.

CER 7.1 vs 2960S switch

I have CER ver 7.1.1.10000-5 with the latest patches. I installed this one most recently to support the 2960S switch (
ciscocm.cer7_1_1_CSCtj28150.cop.sgn).
My 2960S switch is running IOS version 12.2(53r)SE. This switch is stacked with two members switches.
Why is it that my CER console is only showing ports 2/0/1 - 48? I don't see any ports on the first switch.
Thanks,
Patrick

There still should be a management interface on the second switch with SNMP. Is SNMP configured on the second switch?

Cisco Prime LMS 4.1 - Support for Cisco Catalyst 3560-C Series Switches

Hello together
I have a customer which uses the following switch. Last year I have installed LMS 4.1 for him to manage the switches. Unfortunatly the switch model is not supported. According to the information found on the following site the switch is supported for most of the modules in LMS:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/device_support/table/lms41sdt.html
The oid object of the device is the following: 1.3.6.1.4.1.9.1.1465
Supported Software: 12.2(55)EX (Customer has 12.2(55)EX3
Version Support Type: Device Update
So I updated all device updates I was able to find.
Step 1: For that I went to Admin > System > Software Center > Schedule Device Downloads and created a job where I have downloaded the latest versions of all packages.
Step 2: Installed the downloaded packages Admin > System > Software Center > Device Update and installed all the packages.
Unfortunatly I don't see the same result like described in the Supported Device Table for LMS 4.1.
- Cisco View -> works
- Inventory and Config Collection -> works
- Fault Monitor not working -> Error Code Unsupported
- Network Topology Layer 2 Services -> Device Type ciscoProducts.1465, Symbol Question Mark
- VLAN Management -> Doesn't work
- User Tracking > seems also not to work
When I open the report for supported devcies (Reports > System > Device Support) and search for C3560C... I find the following devices, but not mine which i need:
C3560C-8PC-S     .1.3.6.1.4.1.9.1.1466
C3560CG8PC         .1.3.6.1.4.1.9.1.1317
C3560CCG8TC     .1.3.6.1.4.1.9.1.1318
wsC3560CPD8ptS     .1.3.6.1.4.1.9.1.1368
Does anybody have experience with the same switch type / model? Am I doing something wrong or is this type of switch not implemented correctly till now? Further the docuemntation supported devices would be wrong.
Thanks for any feedback Erich

Thanks but I just heard back from my Cisco SE and he assures me that an AP will NOT use up a license.
I've asked him to verify his answer for me.
Is your answer based on real world expereince (the best there is)? That is, are you running Prime LMS 4.1 and does it indeed use up a license for each light-weight AP it discovers & manages?
Thanks for mentioning options 1-3 but I do not wish to employ any of them. I don't mind buying the additional licenses for APs ... I just need to know if I have to or not.
Ian.

Enum class not supported for switch() statement in 12.4 beta?

Hi fellow 12.4 beta testers,
It would appear "enum class" isn't supported for switch() statements in the 12.4 beta. This compiles fine under clang and g++. Will this be fixed for the final release? This currently causes compile errors for us, since __cplusplus >= 201103L evaluates to true, so our code uses "enum class" instead of plain "enum". It looks like the C++11 standard says it should be supported:
   Switching on enum class in C++ 0x - Stack Overflow
Many thanks,
Jonathan.
$ cat test.cpp
#include <iostream>
enum class Ternary { KnownFalse = 0, KnownTrue = 1, Unknown = 2 };
int main( void )
   Ternary foo;
   switch ( foo ) {
      case Ternary::KnownTrue:
      case Ternary::KnownFalse:
      case Ternary::Unknown:
         std::cout << "Success\n";
$ clang++ -std=c++11 test.cpp
$ g++ -std=c++11 test.cpp
$ /opt/SolarisStudio12.4-beta_mar14-solaris-x86/bin/CC -std=c++11 test.cpp
"test.cpp", line 8: Error: Cannot use Ternary to initialize integral type.
"test.cpp", line 8: Error: Switch selection expression must be of an integral type.
"test.cpp", line 9: Error: An integer constant expression is required for a case label.
"test.cpp", line 10: Error: An integer constant expression is required for a case label.
"test.cpp", line 11: Error: An integer constant expression is required for a case label.
5 Error(s) detected.

Thanks for reporting this problem! I have filed bug 18499900.
BTW, according to the C++11 standard, the code is actually not valid. Section 6.4.2, switch statement, says an implicit conversion to an integral type is required, which is not the case for for a scoped enum (one using the "class enum" syntax). This limitation was raised in the C++ Committee as an issue to be fixed, and the C++14 standard makes the code valid.
As a workaround, or to make the code conform to C++11, you can add casts to int for the enum variable and the enumerators.
Message was edited by: Steve_Clamage

Switch support for NAC CCA for 6500 series switch

per the 4.0 document "switch support for Cisco NAC" there is a note that says
Catalyst 6000/6500 on IOS do not support mac-notification
Does this mean you cannot deploy layer 2 OOB mode, as snmp notification to the CAM will not happen with the 6k platform?

Probably, the configuration guide will give you better idea about your problem.
http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_book09186a00803f5611.html

User Tracking supported for Nexus 5K in Prime Infrastructure 1.3

Hi,
Is User Tracking supported for Nexus 5K in Prime Infrastructure 1.3?
Regards
Francois Bouchard

Hi Andy,
Check the below link , as per this Doc .. User tracking is supported in 2.0:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
Thanks-
Afroz
[Do rate the usefu post]

How to configure a cisco 2960 switch to support two routers(data and voice), please give me any suggestions

HI, I need to configure a 2960 switch at a client site. They have routers already been installed on site, one is for data traffic another is for voice. I have created two vlans on switch for data and voice. Now I couldn't get any idea what would be the default gateway on switch.
Please give me any suggestions.

HI Leo,
Many thanks for your reply.
But there are two up-links going from Gi 0/1 and Gi 0/2. I have configured the S/W like below,
interface GigabitEthernet0/1
description UPLINK TO Data router
switchport access vlan 100
switchport mode access
interface GigabitEthernet0/2
description UPLINK TO voice router
switchport access vlan 100
switchport mode access
interface Vlan1
no ip address
no ip route-cache
shutdown
interface Vlan60
ip address 192.168.1.253 255.255.255.0
ip helper address 192.168.1.1
no ip route-cache
interface Vlan100
ip address 172.16.1.253 255.255.255.0
ip helper address 172.16.1.1
no ip route-cache
I have used IP helper address, but I am getting some connecting issues on PCs and IP phones. Please suggest me, Can I manage it with two uplinks with different IP addresses.
Thanks in advance.

Eigrp support for Vrf-lite on 3550 switches

Folks,
Cisco has added support for EIGRP for Vrf-lite on Sup 720's and Metro 3750 swithches. Just curious if anyone knows timeline when Cisco would be doing the same for 3550 series switches.
Thanks

No current plans at this time for EIGRP for Vrf-lite on 3550 since 3750 platform supports it. Contact your account team for feature request who can contact the business unit with a business case.

Increasing TFTP block size for 2960 series switches

I have read that some Cisco components can increase the default TFTP block size to values greater than 512 bytes by using the command -
ip tftp blocksize xxxx
This doesn't seem to be available on Cisco 2960 series switches. Is there a way to do this with the 2960's?

I have moved a WS-C2960-24LC-S running LanLite to 12.2(55)SE9 - the current end of the line for this switch - and indeed the command is not present. Sooo....this appears to be a limitation of LanLite.
My predecessor implemented about 70 switches with LanLite. I put a stop to this about a year ago but it is going to take some time to flush them out of the inventory.
Thanks for your response.

How to priorities(QoS) the traffic for DSCP 46 and 34 in cisco 2960s switch

HI,
We are going to implement Microsoft Lyncs 2013 in our network, so how to priorities the traffic for DSCP 46 and 34 in cisco 2960s switch. Kindly replay with detailed QoS commands for enabling QOs in LAN.
Thanks
Sujish

Hi,
Have a look at this config guide for all the details:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_53_se/configuration/guide/2960scg/swqos.html
HTH

IS Prime DCNM support for 2960 switches

Similar Messages

Maybe you are looking for