Is prolonged use of AC instead of battery harmful?

Is prolonged use of AC instead of battery harmful in any way?

Read this: http://www.apple.com/batteries/

Similar Messages

Hi. Does using the cover lock help battery life?

Hi. Does using the cover lock help battery life?

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

TS2771 i was using an app while the battery ran over, then when i recharged my ipod, i can no longer open that app anymore. Why?

i was using an app while the battery ran over, then when i recharged my ipod, i can no longer open that app anymore. Why?

No idea why.
What have you tried to solve?
Have you tried the basics from the manual?
restart, reset, restore.
Have you tried removing the app, tehn adding it back?

Using SAP PI instead of CRM Middleware

Hi experts,
Is it recommend to use SAP PI instead of SAP CRM Middleware.
If yes how can I do that.
I have read in forum requests that it can be implemented by using iDOC instead of BDocs.
I need a technical guideline how data (eg. Business Partner Data) can be tranferred from CRM to other ERP System.
Thank you for help.
Greetings
Mario
Edited by: Mario Bauer on Jun 22, 2010 9:24 AM
Edited by: Mario Bauer on Jun 22, 2010 9:28 AM

Hi!
SAP PI itself is a middleware Product but very roboust and capable enough to integrate any system to any other system, either it is SAP or Non-SAP. And there are two ways to integrate other ERP System to SAP CRM using SAP PI.
1. SAP PI will receive the message from back end ERP system & convert it to the XML format. SAP CRM receives the message using the Middleware XIF adaptor and convert the incoming XML Messages in the BDocs and the BDocs upload the data in the SAP-CRM Data base.
2. SAP PI will receive the message from back end ERP system & convert it to the XML format. SAP CRM receives the message and using the Functional Module convert the data into the BDocs and the BDocs upload the data in the SAPCRM Data base. In thsi situation, you need an expert ABAP Consultant to write the accurate functional Module.
The data inside the SAP_CRM System always transported in the BDocs not in Idocs. It is the BDocs data containers which transport the data from CRM Middleware to CRM Database and CRM Database upto CRM Middleware.

How do I use openjpa2.0 instead of openjpa1.0

I use openjpa1.0 provider in weblogic10.3.4 before.
now I want use openjpa2.0 instead of openjpa1.0.
I according to this article (http://wiki.eclipse.org/EclipseLink/Development/JPA_2.0/weblogic#Problem_2:_JPA_2.0_persistence.xml_XSD_Enablement) to enable jpa2.0 .
but failed. it throws exception:
what do i do: seems an odd quirk of the EJB spec. The exception is:java.lang.AbstractMethodError: org.apache.openjpa.persistence.EntityManagerImpl.getMetamodel()Ljavax/persistence/metamodel/Metamodel;
at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:111)
I try to delete openjpa1.0 jar file from modules directory.
the servier throws java.lang.NoClassDefFoundError org/apache/openjpa/conf/OpenJPAVersion
it seems the weblogic can't load the openjpa2.0 jar.
can somebody help me?

Hi,
My page quoted above is mostly for older versions of WebLogic 10.3.3.0 and below that could not handle container managed JPA 2.0 injection. For WebLogic 10.3.5.0 and 10.3.4.0 JPA 2.0 is fully functional but will need to be enabled (the best way is to install OEPE, create a server profile to your WebLogic 10.3.4/10.3.4 instance - and select the "Java Persistence 2.0 - Install" link on the dialog in the Eclipse IDE). However, Kodo (based on OpenJPA) is not actively developed. I would switch to EclipseLink which is the Java EE 6 reference implementation. You can do this by changing the default persistence provider in the console from Kodo to TopLink (wraps EclipseLink) or specifying the provider in your persistence.xml.
The link you quote is the section for WebLogic 10.3.3.0
What you need is the new section I wrote in Jan 2011 for the 10.3.4.0
http://wiki.eclipse.org/EclipseLink/Development/JPA_2.0/weblogic#20110115:_JPA_2.0_using_EclipseLink_on_WebLogic_10.3.4.0
See my tutorials for details - where you can also see the source.
http://wiki.eclipse.org/EclipseLink/Examples/JPA/WebLogic_Web_Tutorial
http://wiki.eclipse.org/EclipseLink/Examples/Distributed
thank you
Michael O'Brien
http://www.eclipselink.org

How to maintain Ztable using function module instead of SM30

Hi Friends,
please tell me , How to maintain Ztable or view using function module instead of SM30.
Thanks,
Veerendra.

Hi,
You can design your report and use Function module VIEW_MAINTENANCE_CALL for that.
You need to use Action type as 'S' for displaying and 'U' for maintaining the table.
Ex:
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
    ACTION                               = 'S'
    VIEW_NAME                            = 'Table Name'
EXCEPTIONS
   CLIENT_REFERENCE                     = 1
   FOREIGN_LOCK                         = 2
   INVALID_ACTION                       = 3
   NO_CLIENTINDEPENDENT_AUTH            = 4
   NO_DATABASE_FUNCTION                 = 5
   NO_EDITOR_FUNCTION                   = 6
   NO_SHOW_AUTH                         = 7
   NO_TVDIR_ENTRY                       = 8
   NO_UPD_AUTH                          = 9
   ONLY_SHOW_ALLOWED                    = 10
   SYSTEM_FAILURE                       = 11
   UNKNOWN_FIELD_IN_DBA_SELLIST         = 12
   VIEW_NOT_FOUND                       = 13
   OTHERS                               = 14.
Hope this helps.
Message was edited by: Imtiaz Ahmed

Recently no matter what I do, Firefox will not allow me to use Adobe Reader instead of it's own

I used to be able to display pdf documents using Adobe Reader instead of Firefox's built in. I have tried everything that you suggest and that Adobe suggest. I have uninstalled and reinstalled Firefox. I have uninstalled and reinstalled Adobe Reader (11.0.09). I have gone to the options in Mozilla but when I try to change the Portable Document settings, I don't get the option for "Use Adobe Acrobat (in Firefox)". I do get the for Adobe Forms, but not for PDF documents. If I change it to use Adobe Reader, it downloads and then opens reader which is not I want. I want to use the plugin which is installed (I go to Add-ons and it is installed and "always activate").
Help? This only started happening in the last month or so. I am running latest released Firefox (33.0.2), Windows 7 (up to date with all updates, etc.).

That doesn't solve the problem. I have all those defaults. But in Firefox, it won't let me select for "Portable Document Format" to "Use Adobe Acrobat (in Firefox)" which it used to let me and which is what the Mozilla Firefox help stuff says to do. I can select Adobe Reader but then it downloads it and opens it in a separate reader window rather than using the plugin. If I select to let Firefox "Preview in Firefox", then the Firefox built-in PDF reader will display it. I have added an add-on "pdfViewerSwitcher" which then lets me display in the Adobe Reader plug-in but only after first displaying it in the Firefox preview. So that verifies that the Adobe Reader plug-in works. But I can't set it to always use the Adobe Reader plug-in.
I have some reasons for wanting to use the Adobe Reader plug-in. I use Nuance Power PDF Pro for editing and doing other things with pdfs.
This all used to work and stopped working at some point in the last couple months. And if you search the web, you will find I am not the only one with this complaint.
I don't know whether it is Adobe's fault or Mozilla's fault but at least one of them is broken. And I think it is Firefox since it won't even let me select it but does let me select it for Adobe Forms.

Why can't i use my ipod after the battery died during a reformatting? i've tried many things to fix it.

Why can't i use my ipod after the battery died during a reformatting? i've tried many things to fix it.

I do not understand your question. You do not formate an iPod. Please explain better the problem. what lead up to the problem and what you have tried so far.

How can i use text only instead of text plus the folder icon in the bookmarks toolbar; older firefox allowed this.

I prefer using text only instead of text plus a folder icon in the bookmarks toolbar because it used less space and I can display more bookmark folders in that toolbar. Is that possible in Firefox 4.0? It was possible in the earlier versions of Firefox. If it is possible in Firefox 4.0 how do I do that? Thank you.

First install the "Stylish:" extension then you have thousands of styles available to choose from, most consist of only a few lines, and you can modify them to suit yourself.
* '''Stylish''' :: Add-ons for Firefox<br>https://addons.mozilla.org/firefox/addon/stylish/
* '''Bookmarks Toolbar Fx4 Blue/Folders, Red/Bookmarks'''<br>http://userstyles.org/styles/46947/
* '''some styles I use:'''<br>http://kb.mozillazine.org/User:Dmcritchie

Using SQL Server instead of OLite

Has anyone had any luck with this? I am really not too familiar with the Oracle setup and due to experience, feel much more comfortable using SQL Server.
I read this thread where it talks about using other databases instead of Oracle Lite, but I can't seem to get it to work for SQL Server.
How to use a non-Oracle database?
I can get the ddl file to install and configure for SQL, but I'm having problems getting the JDBC connections to work in the data-sources.xml config file. Can anyone PLEASE... help me here? I've been screwing with this for a few hours, and haven't had much luck and I'm getting really frustrated. I downloaded the DataDirect JDBC drivers, but I'm not sure what I need to do with them in order to get this to work.
Thanks,
TC

Hi TC,
I circled back with the team. The only set of drivers that we currently support for Microsoft SQL Server are the DataDirect drivers. You should be able to download evaluation versions from their web site and their configuration doc do a good job of describing the configuration string you will need to use to set up the data source.
Let us know if it does not work as advertized.
I hope this helps.
Edwin

Using SQL server instead of Olite in Oracle BPEL

I am now trying to use SQL 2000 server instead of Olite in Oracle BPEL. I couldn't find any instruction or admin config guide. Has anyone had any luck with this?
If anyone has any experience, please shed some light on this.
I am now able to get "domain_sqlserver" dll file populated into SQL server.
How di i configure BPEL to use SQL db instead of Olite? Do i need to set up database connections to work?
Thank you very much in advance.

Edwin,
Thank you so much for the info.
I have emailed to [email protected] for the question.
Up to now, i have done the followings:
1. I have successfully populated domain_sqlserver ito SQL 2000 with some modification.
2. I have also configured data-sources.xml under ..\integration\orabel\system\services\install\config and unser ..\integration\orabel\system\appserver\oc4j\j2ee\home\config to use MSFT SQL 2000 instead of Olite.
3. I have also commented out running kill_Olite.bat and start_olite.bat, and start SQL 2000 server.
4. Installed Data Direct JDBC driver
Could you please kindly point me what are the rest of configuration required in order to make it work?
Thank you so much.

Is there an app i can download for a ipod touch 4 that uses your camera instead of your screen for a flashlight

is there an app i can download for an ipod touch 4 that uses your camera instead of your screen

Since the iPod touch doesn't have an LCDflash like the iPhone any app that would turn on the LCD flash on the iPhone into a "flashlight" wouldn't work with the iPod.

Using Relative Path instead of Full Path OMBPlus

Can we use relative paths in OMBPlus scripts instead of full paths. For example all my OMBplus (tcl) scripts are in folder;
C:\tfsroot2\Interfaces and Extracts\branches\Interfaces and Extracts1.1\000 - OWB Prototype\deploy\ora.stg
and the MDX file I would like to deploy is in
C:\tfsroot2\Interfaces and Extracts\branches\Interfaces and Extracts1.1\000 - OWB Prototype\deploy\ora.stg\scripts\dwextract\tables
but when I try to use
OMBIMPORT MDL_FILE '../scripts/dwextract/tables/$tblName.mdx'
instead of
OMBIMPORT MDL_FILE 'C:/tfsroot2/Interfaces and Extracts/branches/Interfaces and Extracts1.1/000 - OWB Prototype/deploy/ora.stg/scripts/dwextract/tables/$tblName.mdx'
It does not work.
I use
call "C:\OraHome_1\owb\bin\win32\OMBPlus.bat" "C:\tfsroot2\Interfaces and Extracts\branches\Interfaces and Extracts1.1\000 - OWB Prototype\deploy\ora.stg\OMB_DEPLOY_TBL.tcl" XTRCT_WRK_INPUT_FILE
in order to execute.
I think it is because It set the OMBPlus.bat location is a base folder. Any way to overcome this issue and use relative paths instead of the full path?

OK, a couple of things. First, you need to remember that TCL treats back-slashes as an escape character. Always use forward slashes in your paths, or double up the back slashes .
So, this should work:
CD "C:\tfsroot2\Interfaces and Extracts\branches\Interfaces and Extracts1.1\000 - OWB Prototype\deploy\ora.stg"
call OMBPlus.bat "C:\\tfsroot2\\Interfaces and Extracts\\branches\\Interfaces and Extracts1.1\\000 - OWB Prototype\\deploy\\ora.stg\\OMB_DEPLOY_TBL.tcl" XTRCT_WRK_INPUT_FILEor this:
CD "C\tfsroot2\Interfaces and Extracts\branches\Interfaces and Extracts1.1\000 - OWB Prototype\deploy\ora.stg"
call OMBPlus.bat "C:/tfsroot2/Interfaces and Extracts/branches/Interfaces and Extracts1.1/000 - OWB Prototype/deploy/ora.stg/OMB_DEPLOY_TBL.tcl" XTRCT_WRK_INPUT_FILEAs an FYI for OMB, if you are prone to doing a lot of scripts and so building libraries of common functions, you can also easilly use the "file" command in order to determine the current directory at runtime so you can plunk your script anywhere with it's required libraries and it will be able to source them at runtime.
For example, all our scripts have this basic bit of code at the beginning so we can pass them between developers and it doesn't matter where anyone put their script directory - the scripts will find the libraries as long as they are co-located:
# Get Current Directory and time
set dtstmp     [ clock format [clock seconds] -format {%Y%m%d_%H%M}]
set scrpt      [ file split [file root [info script]]]
set scriptDir [ file dirname [info script]]
set scriptName [ lindex $scrpt [expr [llength $scrpt]-1]]
set cnfg_lib "$scriptDir/ombplus_config.tcl"
set owb_lib "$scriptDir/omb_library.tcl"
set sql_lib "$scriptDir/omb_sql_library.tcl"
# Import Lbraries
#      Assumes that owb_config, omb_library, and omb_sql_library are in the same directory as this
#      script.
#get config file
if [catch { set retstr [ source $cnfg_lib ] } errmsg] {
   puts "**********************************************************************"
   puts "* Libraries are missing from the current directory. Exiting.... *"
   puts "**********************************************************************"
   return -code 2
#get standard library
source $owb_lib
source $sql_lib
# Set Logfile
#    This will overwrite anything set in the config file.
set LOG_PATH "$scriptDir/logs"
file mkdir $LOG_PATH
set    SPOOLFILE ""
append SPOOLFILE $LOG_PATH "/log_" $scriptName "_" $tabName "_" $dtstmp ".txt"
# Now the main script body goes from here.Cheers,
Mike
Edited by: zeppo on Aug 4, 2009 7:02 AM
Edited by: zeppo on Aug 4, 2009 7:03 AM

Error while using .jar file instead of class file.

Hello friends,
I created a java class which are referred and called from other jsp\xml and java files. I compiled this java class and everything is working properly. However, I do not want to use class files but want to use jar files instead. So, I created a jar file of this class file by using the command "jar -cvf jarfilename.jar".I kept the jar file in its respective folder .Also, I removed the class file from its path, just to see that the jar file will work automatically.
Unfortunately, I am getting an error:
java.lang.RuntimeException: Component.createComponent(...) Component class not found: <java class path>. I also tried giving the path of this jar file in the classpath. This also does not seem working.
How to solve this problem?
Thanks,
Ranjith M.V
Edited by: RanjithM.V on May 11, 2008 10:34 PM

You probably populated the jar file incorrectly.
A common mistake is to include the path that you had on the classpath, in the jar file.
So a person will have a classpath like this: /foo/
And a class in a package bar, like this:
package bar;So that other classes would include the file like this:
import bar.TheClass;And the class file is on the filesystem like this:
.../foo/bar/TheClass.classThen they'll create the jar file including the foo directory, so if they list the jar's contents, they'll see the above (/foo/bar/TheClass.class). But this is wrong. It should start off so that the jar entries start with the top-level package names (like /bar/TheClass.class).
Maybe you've done that.

How to use Spring MVC instead of assembler.jsp in endeca 3.1.0

Hi ,
I am new to Endeca . I want to use spring MVC instead of assembler.jsp .Some body please help
me how can i do it. Wht all i have to do to achieve it.
Thanks
Mark

Hi Mark,
When using the 3.1 Assembler in your application, you can use either the jar file directly or set up the Assembler as an HTTP service and process the XML or JSON responses. Neither of these approaches conflicts with using Spring in your application.
Sean

Is prolonged use of AC instead of battery harmful?

Similar Messages

Maybe you are looking for