IS-R:site profile reference site
Hi Folks.
I have a query,Which site do we take as ref site in site profile (say 0100 Distribution centre) in IMG.In that under ref tab we have to give site " ".which site we have to give as ref site in site profile in an implementation project.Is there any t-code to create ref site.If there is then what's it ?if not then how we create site in wb01 without giving site profile.Expect neat and clear answer.
Regards
Mkumar
Hello Kumar,
You can create the reference site with Txt Code - REFSITE
Site Profile Definition - Site profiles are used to differentiate site categories (distribution center or store) and control maintenance functions.
In Site Profile you can give the ref site for creation of profile with the reference.Hope It will be helpful
Regards
Abdul
Similar Messages
-
Invalid time buckets profile reference
Hi :
I am getting fololowing error while loading data in planning book : " Invalid time buckets profile reference", and unable to laod any data to planning book
I have already done consistency check , initailised version , checked time bucket profile , storage bucket profile , and those are fine .There are no time stream id defined either .Hi Virendra,
Check whether your time bucket profile falls same under storage bucket profile. I mean, check your fiscal year variant in storage bucket profile as well as in Time bucket profile. becz you have assigned the storage bucket profile to planning Area, which having fiscal year variant & if you are using different fiscal year variant in Time bucket profile, this mentined error will appear. -
IOS Configuration Profile Reference outdated
Hi,
I'm currently writing a technical draft iPhone policy for our enterprise. The iPhone configuration utility is a nice tool to create such a policy but it is not really usable for documentation of the different directives. Therefore I was looking for another documentation. The «iOS Configuration Profile Reference» seems to be a nice document, since it describes every single directive.
Unfortunately I had to find out, that there are much more parameters in the current iPhone configuration Utility 3.3 (274) then specified in the iOS Configuration Profile Reference - even it's version is dated to 2011-03-08.
Does anybody know if there is a more current Version of this document, or another paper which specifies all possible parameters?
Chrisany one can help to answer the quesiton?
-
We are unable to process HL7 V2 messages after applying BizTalk 2010 CU 6 in a development environment when we have a BAM tracking profile deployed that references the BTAHL7 messaging payload schemas. The messages process with no issue if we remove the
message payload schema field mappings and use only message context properties. We have replicated this issue using only the default BTAHL7 pipelines and microsoft.com HL7 V2.3 unedited schemas and a very simple BAM activity and tracking
profile. In other words, we've eliminated our customization and still see the issue. The messages fail in the pipeline with the following error:
A pipeline component in the receive pipeline:<BTAHL72XReceivePipeline>,Version=1.0.0.0, Culture=neutral, PublicKeyToken=75be5a91f43bf6c9" is using the message context
properties "BTS.MessageDestination" or "BTS.SuspendMessageOnRoutingFailure" in a unsupported fashion. The pipeline processing is being terminated.
Can anyone help us resolve this issue?
Thanks.This seems to be a known bug please refer the below discussion-
BizTalk Server 2010 Cumulative Update 6 - Compatibility with BTAHL7?
I would suggest you to uninstall CU6 first, restart the VM, Install CU7 and restart again.
CU 7 will have all the bug fixes for BizTalk 2010 till date.
Cumulative
update package 7 for BizTalk Server 2010
Service Pack
and Cumulative Update list for BizTalk Server
Please let me know if there is anything that I can do to help.
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful. -
Firefox deleted all of my saved usernames and passwords for the sites i allowed them, For instance I can no longer click gmail and be at my e-mail and see my email, but i am promoted for password and username.
''passwords and usernames i have for my sites got erased''
Did you have them after updating Firefox, or did you lose your passwords as well. If you lost everything you either created a new profile and are in it, or you accidentally/intentionally cleared your history (see picture link). If you cleared your history, the changes are permanent and they are gone.
If you cleared your history, except for bookmarks in backups, you will have to try for
#Data in an older profile, for most people this would only be if one accidentally created a new profile, such as during a Firefox installation.
#Your own backups
#Old password, cookies from Internet Explorer
Use the "Alt" key to temporarily see your toolbars. Use the view menu to display any toolbars that should be displayed, such as the Bookmarks Toolbar.
Check these:
*Do you have bookmarks Ctrl+B (Bookmarks sidebar), if you don't see your own bookmarks but you see those from when you first installed Firefox, you are probably in a new profile, using the Profile Manager could bring up another profile.
*Check your current bookmarkbackups for dates
:On current profile, you can check dates, and restore/replace current bookmarks from a backup. "Ctrl+Shift+B" to bring up the Library List, then in the "Import and Backup" menu, choose Restore to see what dates are available. This will tell you the last 11 dates you used your current profile in Fx5 (5 days if Fx3). You can restore if your bookmarks are messed up.
Profile: ''Find out if there are multiple profiles''
:type in '''about:support''' into the location bar<br>:Click on "Open containing folder"<br>:You are now in your current profile<br>:go up one directory level to "'''Profiles'''", where you can see if you have more than one profile directory<br>:files of interest (check last used/update dates) within profile: places.sqlite file, and within bookmarkbackups folder are .json bookmark backups for dates.
'''Deleting History/Lost History''' (Tools -> options -> Privacy), make sure you are not clearing in "Settings for Clearing History" anything but cache. The items you have check-marked there will be cleared at end of session if "Clear history when Firefox closes" is check-marked. If under tools you click on "Clear recent history Ctrl+Shift+Del" you should be asked for how much history to delete {1hr, 2hr, 4hr, today, everything} and what to clear in the details drop-down. Make sure when using the location bar you are displaying both "History and Bookmarks" so the AwesomeBar can look for items from both.
* http://img232.imageshack.us/img232/4928/clearcachew.png
'''You should be backing your for Firefox profiles''', there is not a lot of data and you should be backing up frequently. The is a lot more data for other applications in you Windows user library and you should be backing up data from there as well.
When you backup all of your user data to external hard-drive (500GB to 3TB) your Firefox profiles would be included.
But this is about Firefox. For Firefox a thumb drive would probably suffice to backup one or more profiles.
'''backing up your Firefox Profiles''' (the following is all on one line)
xcopy C:\Users\''<username>''\AppData\Roaming\Mozilla\Firefox\Profiles\*.* g:\profiles\*.* /s /d /h /y /c /q
'''Profile references:'''
*http://kb.mozillazine.org/Profile
*http://kb.mozillazine.org/Profile_Manager
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox -
Ultra Newbie Q on adding a Profile to Netbeans
Hi,
I am trying to learn how to add the Personal Profile to Netbeans.
I went to the sun web site and downloaded what I think is the correct one at https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/ViewFilteredProducts-SimpleBundleDownload which has the Personal Basis Profile Reference Implementation with Foundation Profile Security Optional Package.
My problem now is I still see no way top add this to the Platform Manager. Is there some other way to create a CDC project with the personal profile?
Thanks!Hi,
For Clarity.
You can Use AIM names and various other emails like Names from various ISPs or web services like the MobileMe one (and the Previous @mac.com names)
Apple are not the only people who have their email ID's recognised by AIM as valid names.
In fact the @ symbol is a valid character is setting up an AIM name itself (I actually had someone contact me with a Hotmail ID that had used as an AIM name).
Previously in iChat 3 you had a Drop down selection of AIM of An @Mac.com name (it pre-filled the Suffix if you chose @Mac.com)
During Leopard the @mac.com or .Mac service changed to MoblieMe and a further choice was added to the Drop Down.
(And the Jabber/GoogleTalk options in the Jabber side were separated).
It now appears you just type in whatever name it is in full with the relevant suffix.
8:42 PM Tuesday; September 8, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
Hello all:
When I download Java ME SDK 3.0, I notice one of the feature is
CLDC/MIDP, CDC/FP/PBP/AGUI and BD-J integrated into one SDK
So Java ME SDK 3.0 doesn't contain Personal Profile? There is a personal profile reference implementation on sun's website. Is it the PP package one can use for CDC/PP development?
Thanks,
PHi,
I'm seeing that your message is old, and I would like to know if you solve your problem, as I have more or less the same now.
I'm working with Eclipse IDE, and with J2ME-CLDC works OK, but I don't know how to work with CDC.
I have downloaded the toolkits of Sun, but don't know how to use them with eclipse. -
Cisco IPSec and XAuthPassword profile key
I am creating the config profile for iPhone, while using iPhone Configuration Utility I can not enter password for IPSec VPN as the application does not have UI for that.
I had found, though, that manually writing "XAuthPassword" key into the config profile does the trick, iPhone do recognize that entry and sets the password automatically on applying profile.
So, the questions are:
1) Is this config key officially supported on iOS for IPSec VPN? If yes, then starting with which version?
2) Because iPhone Configuration Utility does not allow me to create signed profiles containing XAuthPassword key, can I manually sign the configuration profile I had edited?
Thank you in advanceHi,
in « iOS Configuration Profile Reference »:
IPSec Dictionary Keys
XAuthEnable – Integer:1 if XAUTH is ON, 0 if it is OFF. Used for Cisco IPSec.
It turn off XAuth and do not ask for User/Password.
You can try this option by editing configuration profile like this:
<key>XAuthEnabled</key>
<integer>0</integer>
<key>AuthenticationMethod</key>
<string>Certificate</string>
but I can`t resolve the problem, I seems it is a ios (4.3.1) bug, because my vpn-server works fine with other vpn-clients, like Cisco VPN Client, with certificate authentication and without xauth.
Best regards! -
How can you configure an Exchange Account in Mac OS X to use a SSL client certificate?
I'm trying to connect the Mail App of Mac OS X to my company's Exchange server. For security reasons you have provide a SSL client certificate to the server. You can convince Safari to use a client certificate by putting it into your keychain and configuring a suitable "identity preference" for the URL of the related site. But the Mail App seems not to use the keychain for this part of the SSL negotiations.
Since you can configure the client certificate usage for an Exchange Account for the iPhone with the Configuration Utility there should be a way for the desktop App, too. Has someone sorted this issue out already or does the Mail App actually lack of client certificate support?I had a nice chat with the Apple end user support which revealed that this feature falls in the responsibility of the business support group. Since I have no appropriate support contract I could ask for help for about 480€ per issue -- nice try
After more research I found the Configuration Profile Reference, where you get information about Exchange accounts too. Starting with a working iOS-Profile I changed the Exchange account part according to this documentation for OS X. All you have to do is to replace PayloadType com.apple.eas.account by com.apple.ews.account.
After importing this profile I found the expected Exchange account within the Contacts.app. But the SSL client certificate was still not used and therefore my account not usable.
You could enable Mail, Calendar & Reminders and Notes within the System Preferences, but neither of these would work due to the missing client certificate support.
I came to the conclusion that the relevant applications in OS X have no proper SSL Client support build in. Since the underlying libraries and frameworks have everything in place that is really a shame.
Would be nice, if someone would enforce the developers to do their homework there. -
Self Service request is going to error after final Approver.
Hi,
Here we configured leave system through EIT and we are using self service (EIT) to make leave request. We have 3 level of approver for Annual Leave. Problem here is after final approver (3rd approver) approves the leave then request is going in to error. I traced the item key through Workflow Administrator > Status Monitor.
The error is Details are given below (Status Monitor)
Failed Activity
Notify HR About Commit Application Error
Activity Type
Notice
Error Name
WFNTF_ROLE
Error Message
3205: '[email protected]' is not a valid role or user name.
Error Stack
Wf_Notification.Send([email protected], HRSSA, HR_EMBED_DEPT_COMMAPPLERR_MSG, WF_ENGINE.CB) Wf_Engine_Util.Notification_Send(HRSSA, 1649471, 195663, HRSSA:HR_EMBED_DEPT_COMMAPPLERR_MSG) Wf_Engine_Util.Notification(HRSSA, 1649471, 195663, RUN)
I appreciate if someone can help me.
Regards,
Jojo GeorgeOkay, if the $PROFILES$ reference has been working for a long time that doesn't sound like a problem. I would then suggest this is an unusual data scenario where the value the user selected was temporarily available. Don't ask me how - it's your data! The user that submitted it might be able to shed some light. For example, this kind of thing might do it:
1) Manager logs on to ESS, starts an SIT transaction (the one in question) and Saves for Later. This sets $PROFILES$.PER_PERSON_ID to themself.
2) Manager then switches to MSS and views one of their employees - this sets $PROFILES$.PER_PERSON_ID to their employee, not themselves.
3) Manager then navigates to Homepage and continues the Saved for Later transaction from the Worklist (ie, without clicking on the ESS responsibility). Perhaps $PROFILES$.PER_PERSON_ID is still set to their direct report rather than themselves?
4) Manager then selects one of their employees contracts rather than their own (because of $PROFILES$.PER_PERSON_ID being wrong).
5) Manager submits the transaction.
I don't know if that's possible or even if that's how it behaves. But it sounds plausible and is an example of perhaps the weird set of circumstances that might have happened here. Regardless, I'd still maintain that this value was available to the user in the Value Set at the time they submitted it.
If it's just a one-off data problem and this has been working fine for a while I wouldn't worry about it. Bin the workflow, get the employee to re-submit. Job done. -
Possible bug in JEE Application Server Library MP?
The Beanspy Alert monitor reports alerts with missing data. See example below, specifically the {} returned parameters appear empty/incorrect.
Application server connection lost
Alert Description
Source:
Full Path Name:
Alert Monitor:
BeanSpy
Created:
The Health Service lost the connection to BeanSpy on port {2} to the machine {1} for the application server ID '{0}'.So the next step I took was taking a deep dive into the JBoss.Monitored.Configuration.Discovery scripts and I found that the script tries to find and/or create registry keys about its discovered Jboss instances.
The key being created is: HKLM\Software\Microsoft\Microsoft Operations Manager\3.0\Modules\{GUID}\.\Script\PersistedDiscovery
In that key, values are stored called HTTP and HTTPS.
The persistedDiscovery key is deleted and recreated when you stop the Microsoft Monitoring Agent service and/or flush the health state cache. Thus manually adding the values is no use.
The HTTP and HTTPS values in a Jboss7 instance running domain mode cannot be retrieved because the port configuration is done at the Jboss domain controller and 'streamed' to the Jboss domain hosts.
In JBoss 5 instance however I see HTTP and HTTPS values being inserted into the registry. In a few cases incorrect information about ports is found and added to the registry.
In the Jboss discovery vbs I found the pieces for Jboss5:
' Get the HTTP & HTTPS ports of the JBoss 5 installation that runs a specific configuration
' Do this by adding the offset for the port binding to the base ports found in the XML file
' bindings-jboss-beans.xml located in <configuration>\conf\bindingservice.beans\META-INF\
Apparantly what is written in this file does not actually reflect the running config.
For Jboss7 it appears quite a bit more complex (especially running domain mode):
Step1:
' Get the HTTP and HTTPS ports for a JBoss 7 or Wildfly installation that is running in domain mode
' In order to get the HTTP Ports we must first retrieve the group that the server belongs too, as well as the port offset for each server
' These values both resiode within the host.xml file
Step2:
' We then look within domain.xml to find the profile reference based on the group name that we retrieved from host.xml
' After the profile reference we then can find the socket-bindings for http and https ports
While the information is there, these values are not added to the registry.
Thus, so far the script is looking in the right place to find the used ports for that particular Jboss7 Service, yet the monitor for the BeanSpy is not using that port to contact the BeanSpy.
My investigation continues... -
Target groups in Marketing....Urgent
Hi,
I have created a Profile set and Target groups in the profile set. i have executed the campaign for that.
My Question, is can i add the target group created earlier to the another profile set, if so How?
I am in urgent need of documentation of the same.
Regards
Yaswanth.kPlease read carefully the rules regarding target groups in CRM Segment Builder:
<i>-A target group can exist without reference to a profile. If so, it must however reference a profile set ("lies in profile set..") or as a subset, if present ("is attached to profile set ...").
-If a target group is created with the profile set reference "is attached to" (that is, to a subset), it will have the status "active"; and any available target groups of the profile of the subset will be set to "inactive".
-A target group with profile reference always has a set reference ("lies in profile set ..").
-A target group with profile reference cannot be attached directly to a profile set.
Within a profile set, a target group without profile reference is represented by an icon indicating a single target group.</i>
<i><b>-You cannot move target groups from one profile set to another, however you can copy existing target groups.</b></i>
The documentation is available here:
http://help.sap.com/saphelp_crm50/helpdata/en/b6/ef0b3bcbe24b74e10000000a114084/frameset.htm
If by "add target group to another profile set" you mean to say "COPY target group to another profile set", then yes it is possible to do it.
As for the "how" ... please read the help again:
<i>To copy a marketing segment, select the required segment in the staging area of the Segment Builder and choose either the Copy pushbutton or choose Copy Segments from the context menu. If no individual segments are selected, the entire profile set is copied.
You can choose whether the copied segments are created in a new profile set, an existing profile set, an existing subset, or in a new subset of an existing profile set.</i>
http://help.sap.com/saphelp_crm50/helpdata/en/1c/611d429e66da2ce10000000a1550b0/frameset.htm
Hope this helps,
Rahul
PS. Please mark all helpful answers. If you question has been answered, please mark it as such so that the forum stays clean! -
Hi ,
Coule you please provide me a list of master tables in APO.
Regards
ArunHi You can search it by yourself
TCode SE11 --> in the Database table input field Press F4 --> After that you will get one popup windo in that Press on SAP Applications --> You will get details in one new window ... In that select SCM --> SCM-APO --> SCM-APO-MD -->
SCM-APO-MD Master Data
/SAPAPO/BOD Bill of Distribution
/SAPAPO/BODMOD Model Assignment to BOD
/SAPAPO/CAL Calendar functions in APO
/SAPAPO/TCALPATT Planning periods: calculation rule
/SAPAPO/TCALPERI PP planning periods: schedule lines (period
/SAPAPO/TTSTR APO Enhancements for Table TTSTR (Time Stre
/SAPAPO/CAL Calendar functions in APO
/SAPAPO/TCALPATT Planning periods: calculation rule
/SAPAPO/TCALPERI PP planning periods: schedule lines (period
/SAPAPO/TTSTR APO Enhancements for Table TTSTR (Time Stre
/SAPAPO/CBM Batch Management
/SAPAPO/VERSKEY Version
/SAPAPO/COST APO Cost Maintenance
/SAPAPO/TPCFC Transportation Planning Cost Functions
/SAPAPO/TPDCA Capacity Decrease per MTr and Loading Dimensio
/SAPAPO/TPKMV Transportation Planning: Maximum Visit Time
/SAPAPO/TPKOG Transportation Planning: Global Costs
/SAPAPO/TPKOS Transportation Planning Costs Priority
/SAPAPO/TPKPM Transportation Planning: Penalty Multipliers
/SAPAPO/TPKTF Transportation Planning: Costs Transport Type
/SAPAPO/TPKTY Transportation Planning: Costs Transport Type
/SAPAPO/TPKWT Transportation Planning: Wait time
/SAPAPO/TPLCO Transportation Planning Load Costs
/SAPAPO/MRPA MRP areas
/SAPAPO/MRPACUS1 Global Parameters and Default Values for M
/SAPAPO/OO_MASTER_DATA Cross-Master-Data Objects
/SAPAPO/DTQUOT Profile for Maximum Delivery Time Quotas (
/SAPAPO/FNMAT Freely-Definable Names for Attributes
/SAPAPO/FNMATT Freely-Definable Names for Attributes
/SAPAPO/FTMREF Time Reference for Display Fields
/SAPAPO/MD_CUST Customizing Settings for Master Data Area
/SAPAPO/MNTFNC Application Assignment Table- TabDynpro
/SAPAPO/MNTFNCT Text Table for Application Assignment Tabl
/SAPAPO/MNTPRFH Header Table for Role Profiles
/SAPAPO/MNTPRFP Item Table for Display Profile References
/SAPAPO/MNTPRFT Text Table for Display Profile
/SAPAPO/MNTPUSR User Profile Table
/SAPAPO/PLANNER Person Responsible for a Product
/SAPAPO/PLNRGRP Assignment of Analyst to Supplier and to P
/SAPAPO/SYSDIR Assignment of System/Client to RFC Destina
/SAPAPO/SYSLST List of Business Systems
/SAPAPO/SYSLSTT Texts for business system list
/SAPAPO/TTGR_TXT Delivery Scheduling: Transportation Groups
/SAPAPO/USERPLAN Planner - User Assignment
/SAPAPO/MRPA MRP areas
/SAPAPO/MRPACUS1 Global Parameters and Default Values for M
/SAPAPO/OO_MASTER_DATA Cross-Master-Data Objects
/SAPAPO/DTQUOT Profile for Maximum Delivery Time Quotas (
/SAPAPO/FNMAT Freely-Definable Names for Attributes
/SAPAPO/FNMATT Freely-Definable Names for Attributes
/SAPAPO/FTMREF Time Reference for Display Fields
/SAPAPO/MD_CUST Customizing Settings for Master Data Area
/SAPAPO/MNTFNC Application Assignment Table- TabDynpro
/SAPAPO/MNTFNCT Text Table for Application Assignment Tabl
/SAPAPO/MNTPRFH Header Table for Role Profiles
/SAPAPO/MNTPRFP Item Table for Display Profile References
/SAPAPO/MNTPRFT Text Table for Display Profile
/SAPAPO/MNTPUSR User Profile Table
/SAPAPO/PLANNER Person Responsible for a Product
/SAPAPO/PLNRGRP Assignment of Analyst to Supplier and to P
/SAPAPO/SYSDIR Assignment of System/Client to RFC Destina
/SAPAPO/SYSLST List of Business Systems
/SAPAPO/SYSLSTT Texts for business system list
/SAPAPO/TTGR_TXT Delivery Scheduling: Transportation Groups
/SAPAPO/USERPLAN Planner - User Assignment
/SAPAPO/MRPA MRP areas
/SAPAPO/MRPACUS1 Global Parameters and Default Values for M
/SAPAPO/OO_MASTER_DATA Cross-Master-Data Objects
/SAPAPO/DTQUOT Profile for Maximum Delivery Time Quotas (
/SAPAPO/FNMAT Freely-Definable Names for Attributes
/SAPAPO/FNMATT Freely-Definable Names for Attributes
/SAPAPO/FTMREF Time Reference for Display Fields
/SAPAPO/MD_CUST Customizing Settings for Master Data Area
/SAPAPO/MNTFNC Application Assignment Table- TabDynpro
/SAPAPO/MNTFNCT Text Table for Application Assignment Tabl
/SAPAPO/MNTPRFH Header Table for Role Profiles
/SAPAPO/MNTPRFP Item Table for Display Profile References
/SAPAPO/MNTPRFT Text Table for Display Profile
/SAPAPO/MNTPUSR User Profile Table
/SAPAPO/PLANNER Person Responsible for a Product
/SAPAPO/PLNRGRP Assignment of Analyst to Supplier and to P
/SAPAPO/SYSDIR Assignment of System/Client to RFC Destina
/SAPAPO/SYSLST List of Business Systems
/SAPAPO/SYSLSTT Texts for business system list
/SAPAPO/TTGR_TXT Delivery Scheduling: Transportation Groups
/SAPAPO/USERPLAN Planner - User Assignment
/SAPAPO/MRPA MRP areas
/SAPAPO/MRPACUS1 Global Parameters and Default Values for M
/SAPAPO/OO_MASTER_DATA Cross-Master-Data Objects
/SAPAPO/DTQUOT Profile for Maximum Delivery Time Quotas (
/SAPAPO/FNMAT Freely-Definable Names for Attributes
/SAPAPO/FNMATT Freely-Definable Names for Attributes
/SAPAPO/FTMREF Time Reference for Display Fields
/SAPAPO/MD_CUST Customizing Settings for Master Data Area
/SAPAPO/MNTFNC Application Assignment Table- TabDynpro
/SAPAPO/MNTFNCT Text Table for Application Assignment Tabl
/SAPAPO/MNTPRFH Header Table for Role Profiles
/SAPAPO/MNTPRFP Item Table for Display Profile References
/SAPAPO/MNTPRFT Text Table for Display Profile
/SAPAPO/MNTPUSR User Profile Table
/SAPAPO/PLANNER Person Responsible for a Product
/SAPAPO/PLNRGRP Assignment of Analyst to Supplier and to P
/SAPAPO/SYSDIR Assignment of System/Client to RFC Destina
/SAPAPO/SYSLST List of Business Systems
/SAPAPO/SYSLSTT Texts for business system list
/SAPAPO/TTGR_TXT Delivery Scheduling: Transportation Groups
/SAPAPO/USERPLAN Planner - User Assignment
/SAPAPO/MRPA MRP areas
/SAPAPO/MRPACUS1 Global Parameters and Default Values for M
/SAPAPO/OO_MASTER_DATA Cross-Master-Data Objects
/SAPAPO/DTQUOT Profile for Maximum Delivery Time Quotas (
/SAPAPO/FNMAT Freely-Definable Names for Attributes
/SAPAPO/FNMATT Freely-Definable Names for Attributes
/SAPAPO/FTMREF Time Reference for Display Fields
/SAPAPO/MD_CUST Customizing Settings for Master Data Area
/SAPAPO/MNTFNC Application Assignment Table- TabDynpro
/SAPAPO/MNTFNCT Text Table for Application Assignment Tabl
/SAPAPO/MNTPRFH Header Table for Role Profiles
/SAPAPO/MNTPRFP Item Table for Display Profile References
/SAPAPO/MNTPRFT Text Table for Display Profile
/SAPAPO/MNTPUSR User Profile Table
/SAPAPO/PLANNER Person Responsible for a Product
/SAPAPO/PLNRGRP Assignment of Analyst to Supplier and to P
/SAPAPO/SYSDIR Assignment of System/Client to RFC Destina
/SAPAPO/SYSLST List of Business Systems
/SAPAPO/SYSLSTT Texts for business system list
/SAPAPO/TTGR_TXT Delivery Scheduling: Transportation Groups
/SAPAPO/USERPLAN Planner - User Assignment
/SAPAPO/MRPA MRP areas
/SAPAPO/MRPACUS1 Global Parameters and Default Values for M
/SAPAPO/OO_MASTER_DATA Cross-Master-Data Objects
/SAPAPO/DTQUOT Profile for Maximum Delivery Time Quotas (
/SAPAPO/FNMAT Freely-Definable Names for Attributes
/SAPAPO/FNMATT Freely-Definable Names for Attributes
/SAPAPO/FTMREF Time Reference for Display Fields
/SAPAPO/MD_CUST Customizing Settings for Master Data Area
/SAPAPO/MNTFNC Application Assignment Table- TabDynpro
/SAPAPO/MNTFNCT Text Table for Application Assignment Tabl
/SAPAPO/MNTPRFH Header Table for Role Profiles
/SAPAPO/MNTPRFP Item Table for Display Profile References
/SAPAPO/MNTPRFT Text Table for Display Profile
/SAPAPO/MNTPUSR User Profile Table
/SAPAPO/PLANNER Person Responsible for a Product
/SAPAPO/PLNRGRP Assignment of Analyst to Supplier and to P
/SAPAPO/SYSDIR Assignment of System/Client to RFC Destina
/SAPAPO/SYSLST List of Business Systems
/SAPAPO/SYSLSTT Texts for business system list
/SAPAPO/TTGR_TXT Delivery Scheduling: Transportation Groups
/SAPAPO/USERPLAN Planner - User Assignment
/SAPAPO/MRPA MRP areas
/SAPAPO/MRPACUS1 Global Parameters and Default Values for M
/SAPAPO/OO_MASTER_DATA Cross-Master-Data Objects
/SAPAPO/DTQUOT Profile for Maximum Delivery Time Quotas (
/SAPAPO/FNMAT Freely-Definable Names for Attributes
/SAPAPO/FNMATT Freely-Definable Names for Attributes
/SAPAPO/FTMREF Time Reference for Display Fields
/SAPAPO/MD_CUST Customizing Settings for Master Data Area
/SAPAPO/MNTFNC Application Assignment Table- TabDynpro
/SAPAPO/MNTFNCT Text Table for Application Assignment Tabl
/SAPAPO/MNTPRFH Header Table for Role Profiles
/SAPAPO/MNTPRFP Item Table for Display Profile References
/SAPAPO/MNTPRFT Text Table for Display Profile
/SAPAPO/MNTPUSR User Profile Table
/SAPAPO/PLANNER Person Responsible for a Product
/SAPAPO/PLNRGRP Assignment of Analyst to Supplier and to P
/SAPAPO/SYSDIR Assignment of System/Client to RFC Destina
/SAPAPO/SYSLST List of Business Systems
/SAPAPO/SYSLSTT Texts for business system list
/SAPAPO/TTGR_TXT Delivery Scheduling: Transportation Groups
/SAPAPO/USERPLAN Planner - User Assignment
/SAPAPO/MRPA MRP areas
/SAPAPO/MRPACUS1 Global Parameters and Default Values for M
/SAPAPO/OO_MASTER_DATA Cross-Master-Data Objects
/SAPAPO/DTQUOT Profile for Maximum Delivery Time Quotas (
/SAPAPO/FNMAT Freely-Definable Names for Attributes
/SAPAPO/FNMATT Freely-Definable Names for Attributes
/SAPAPO/FTMREF Time Reference for Display Fields
/SAPAPO/MD_CUST Customizing Settings for Master Data Area
/SAPAPO/MNTFNC Application Assignment Table- TabDynpro
/SAPAPO/MNTFNCT Text Table for Application Assignment Tabl
/SAPAPO/MNTPRFH Header Table for Role Profiles
/SAPAPO/MNTPRFP Item Table for Display Profile References
/SAPAPO/MNTPRFT Text Table for Display Profile
/SAPAPO/MNTPUSR User Profile Table
/SAPAPO/PLANNER Person Responsible for a Product
/SAPAPO/PLNRGRP Assignment of Analyst to Supplier and to P
/SAPAPO/SYSDIR Assignment of System/Client to RFC Destina
/SAPAPO/SYSLST List of Business Systems
/SAPAPO/SYSLSTT Texts for business system list
/SAPAPO/TTGR_TXT Delivery Scheduling: Transportation Groups
/SAPAPO/USERPLAN Planner - User Assignment -
AME CS6 hangs upon clicking "start"
Hello all,
Forgive me if this has been discussed previously. I have searched the forum and come up empty handed.
I am running OS X Snow Leopard with AME CS 6 and Premiere CS 6. I encounter problems when I try to queue files from Premiere, or even when I plain import them from finder. I choose my settings (often H. 264 / DV Widescreen 24p) and click start. The screen hangs with no motion and the "encoding" bar doesn't budge. Strangely, I can still cancel the job from within the program. It is not completely frozen.
This problem occurred after 48 hours successful use of the utility, and I changed nothing in the process. I have reinstalled AME and Premiere, and performed preference resetting by holding shift upon AME startup.
Can anyone else suggest a solution? Thank you so much.Server-side user profiles, references to previously opened files on network volumes, all other network stuff you can imagine. AI is notoriously inept at most of that. Beyond that anything from color profiles, fonts, printers and other configuration stuff can have similar effects. Also you may need deal with that PDF stuff that Apple hide/ suppress on newer versions of OSX. Not a current Mac user, though, just throwing out recollections from things I've read here and there...
Mylenium -
Illustrator CS6 Hangs on Start-Up/Launch
Hi Everyone,
I have a client that installed CS6 Productiom Premium with a volume license on multiple Mac Pros and is saying that Illustrator hangs upon launch, meaning, it will take 1-2 minutes to launch the program. Out of all the computers he has installed the software with, one does not have an issue with start-up and launches almost immediately. He is currently looking on his end what is different on that machine compared to the others.
But what I need help with is suggesting to him what else can he try to rectify the hang-up issue? I have walked him through the steps in deleting his Font cache and resetting his preferences and he still reports a hang-up on launch.
Does any one have any other suggestions? He has Mac Pros with Lion on them.
Any help would be greatly appreciated!
Thanks!Server-side user profiles, references to previously opened files on network volumes, all other network stuff you can imagine. AI is notoriously inept at most of that. Beyond that anything from color profiles, fonts, printers and other configuration stuff can have similar effects. Also you may need deal with that PDF stuff that Apple hide/ suppress on newer versions of OSX. Not a current Mac user, though, just throwing out recollections from things I've read here and there...
Mylenium
Maybe you are looking for
-
Textinput on ios Cursor and typed text start where the textinput was clicked but should start left
So... the TextInput works well in the simulator and on android... but on an iPhone the text starts at the position where the user clicks in the text input and that feels strange and looks ugly... the code: <s:TextInput id="firstNameInput"
-
I just bought a wrt310n router and was trying to use my ps3 wirelessly but im having problems getting it to work completly right......cant get javascript to work on ps3 web browser cant play online games except f1 game the ps3 said this router didnt
-
Boolean representation in RFC xml
Hello, I have problems with representing boolean values in an RFC xml call using XI towards SAP. Using 'X' as a value for true does not seem to work. The BAPI I am calling through RFC xml is BAPI_CHARACT_CREATE and I am trying to set the parameter IN
-
Hey guys, I just got my macbook yesterday. Really excited and played around the cool features for hours, no problem at all. Although I notice the edge of the palm rest is not perfectly aligned, I can live with it happily. Nothing is perfect, right? G
-
I have an iphone 4s and upgrade to ios6. It wont connect now after the upgrade to itunes and the itunes doesnt regonize the device. Im so freaking sad. Please somebody give me a fix. Why did I have to upgrade to ios6? Please somebody let me see the l