Is Radeon HD 6450A 24/96 or 24/192

I reformatted my Lenovo Q 180, and it's showing the audio support for 24/96 bit sound over the HDMI. I believe if I remember correctly, I saw HDMI support for audio 24/192 audio. But I don't remember well. Does it support 24/192? And if it does support 24/192 bit sound how to set it up for 24/192bits? Please help
Solved!
Go to Solution.

if you right click the speaker next to your clock and goto playback devices then click on speakers and the properties, then change the default format to studio quality (24bit, 192000hz)
Thx dave
yoga 2, lenovo b540
3 custom gaming pc systems

Similar Messages

HP TouchSmart7320PC; buying GPU inqury

Hello,
I have Intel intergrated GPU with 64mb memory and am willing to buy a better graphics card since I saved up some money.
I own HP TouchSmart7320 PC (desktop) and I want to know which graphics card can I buy and if there are any limitations. I've also been trying to find out which dock the pc has since I can't find that info anywhere and it seems crucial to plugging the GPU in the PC once I own it.
Thanks in advance,
Filip.

This isn't a traditional desktop, and doesn't have desktop expansion slot or use desktop components. AIO computers have more in common with a laptop then they do a desktop. The below listed HP sourced graphics adapters are most likely the only adapters that will work in your computer;
671561-001 ATI Radeon HD 6450a PCIe x16, 1GB DDR3 MXM 3.0A graphics card - Includes mounting bracket
671563-001 ATI Radeon HD 6450a PCIe x16, 2GB DDR3 MXM 3.0A memory graphics card - Includes mounting bracket
671564-001 nVidia GeForce GT 1GB DDR3 MXM 3.0A graphics card - Includes mounting bracket
671565-001 nVidia GeForce GT 2GB DDR3 MXM 3.0A graphics card - Includes mounting bracket
687445-001 Graphics Card - Panther
Additionally, you will most likely need one or more of the following HP sourced parts to complete the installation of the graphics adapter;
645326-001 Processor heat sink assembly - For Small Form Factor PC
671548-001 Thermal module (heat sink) for use with the AMD/Intel processors, 65 Watts TDP
671562-001 Graphics card thermal heat module (35 Watts)
689369-001 Graphics heat sink assembly - For use with the discrete graphics card - Includes replacement thermal (MXM 3.0, USDT)
As the time, money, and effort involved... far exceed the improvement, I suggest not doing this upgrade.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

EHP4 - 6.14.1.7 Retail-specific POWER list: promotion

I'm trying to gather detailed info abt this specific power-list (6.14.1.7 Retail-specific POWER list: promotion) I don't see Detailed info for P4 anywhere posted?
plz point to any doc repository.
thanks.
Suresh.

After update I have only garbage on the screen with Radeon HD 5850. Log shows fail only here:
[ 192.551] (II) RADEON(0): RADEONInitMemoryMap() :
[ 192.551] (II) RADEON(0): mem_size : 0x10000000
[ 192.551] (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0
[ 192.551] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
[ 192.551] (II) RADEON(0): Depth moves disabled by default
[ 192.551] (II) RADEON(0): Setting up accel memmap
[ 192.551] (II) RADEON(0): Memory manager initialized to (0,0) (3072,8191)
[ 192.551] (II) RADEON(0): Reserved area from (0,2880) to (3072,2882)
[ 192.551] (II) RADEON(0): Largest offscreen area available: 3072 x 5309
[ 192.551] (II) RADEON(0): Initializing fb layer
[ 192.551] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[ 192.551] (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x003f0000
[ 192.551] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
[ 192.561] (II) RADEON(0): Initializing backing store
[ 192.561] (==) RADEON(0): Backing store disabled
[ 192.561] (WW) RADEON(0): Direct rendering disabled
[ 192.561] (II) RADEON(0): Initializing Acceleration
[ 192.561] (EE) RADEON(0): Acceleration initialization failed
PS: VESA works pretty fast now
Last edited by Andru (2012-03-29 22:01:48)

VIA S3G unichrome IGP driver, version 6.14.10.212

I am having problems with the above graphics driver, low resloution. Apparently I need a driver update, and I have searched and searched and the driver that Nvidia recommends, 5204-WHQL.shtml , according to my computer, it isn't the right one.
I found an updated version of 6.14.10.212 dated 08, fromCnet web site, I downloaded it and it came through as a 'zip' file which I have opened, but to install the update I need the 'exe' file, I cannot find one anywhere in this update or in the original.
Please advise, this is becoming a real hastle. Thanks.
My computer, Pavillion a420a, Windows XP, Firefox browser.

After update I have only garbage on the screen with Radeon HD 5850. Log shows fail only here:
[ 192.551] (II) RADEON(0): RADEONInitMemoryMap() :
[ 192.551] (II) RADEON(0): mem_size : 0x10000000
[ 192.551] (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0
[ 192.551] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
[ 192.551] (II) RADEON(0): Depth moves disabled by default
[ 192.551] (II) RADEON(0): Setting up accel memmap
[ 192.551] (II) RADEON(0): Memory manager initialized to (0,0) (3072,8191)
[ 192.551] (II) RADEON(0): Reserved area from (0,2880) to (3072,2882)
[ 192.551] (II) RADEON(0): Largest offscreen area available: 3072 x 5309
[ 192.551] (II) RADEON(0): Initializing fb layer
[ 192.551] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[ 192.551] (II) RADEON(0): MC_FB_LOCATION : 0x00df00d0 0x003f0000
[ 192.551] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
[ 192.561] (II) RADEON(0): Initializing backing store
[ 192.561] (==) RADEON(0): Backing store disabled
[ 192.561] (WW) RADEON(0): Direct rendering disabled
[ 192.561] (II) RADEON(0): Initializing Acceleration
[ 192.561] (EE) RADEON(0): Acceleration initialization failed
PS: VESA works pretty fast now
Last edited by Andru (2012-03-29 22:01:48)

Blue screen and restart / ThinkPad T40 2373-94G Windows 7 and 32MB ATI Radeon 9000

Hello !
I'm having a lot of trouble with video driver for windows 7 for ati radeon 9000.
There is no driver for windows 7 and I tryed with driver for winXP, ... etc and didnt find any solution .
Actually driver for windows xp actually works on windows 7, but as soon as I tried to open any application or game I got blue screen with error and computer reboots...
Thank you for any information or solution !
My computer is :
Product: ThinkPad T40 2373-94G [change]
Operating system: Windows 7 [change]
Original description: P M 1.6GHz, 512MB RAM, 80GB 4200rpm HDD, 14.1 SXGA+(1400x1050) TFT LCD, 32MB ATI Radeon 9000, 16x10x24x/8x CD-RW/DVD(slim), Bluetooth/Modem, 1Gb Ether, Intel 802.11b , Sec Chip, UltraNav, 9 cell Batt, WinXP Pro

Welcome to the forum!
As I'm sure you know by know, your GPU is not supported in W7.
That being said, take a look at this thread:
http://forum.thinkpads.com/viewtopic.php?f=57&t=77964
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Radeon 9600TX + Xorg 1.6.1.901: Disturbing Flicker

Hi! I try to setup a Radeon 9600 TX (R300 Chip) with Xorg 1.6.1.901 and xf86-video-ati. I want to use 2D + 3D acceleration. This is a new system setup using XFCE. (I intend to add compiz later.)
Acceleration for 3D is present + ok. Window resizing is rather choppy but acceptable. But I see a disturbing flicker when logged into X, as if waves were running down the screen horizontally. This is very inconvenient and hurts the eyes after a short time. Also the font in the VCs is not displayed in sharp edges but I do not know if this is interrelated (or erroneous).
I would like to keep the xorg.conf minimal. Since the DDC/EDID data that shows up in the log is correct, I did not add any ModeLines or mode setup. The log shows that xorg makes all decisions right (how it seems to me).
There are loads of posts about ati issues but I did not find anything that helped me solving my problem. Perhaps someone can help? Thanks in advance.
xorg.conf
# /etc/xorg.conf
# for Xorg 1.6.1
# For combination of C19-3 with Radeon 9600TX.
# This is a mere addition to the built-in configuration. This file only
# contains what cannot be autoconfigured or is to overwrite
# autoconfigured options.
Section "ServerFlags"
Option "DontZap" "false"
EndSection
Section "Monitor"
Identifier "FUS C19-3"
VendorName "FUS"
ModelName "C19-3"
Option "DPMS"
EndSection
Section "Device"
Identifier "Medion Radeon 9600 TX"
VendorName "ATI Technologies Inc"
BoardName "R300 NF [Radeon 9600 TX]"
Driver "radeon"
Option "AccelMethod" "EXA"
Option "EXAVSync" "true"
Option "DRI" "true"
Option "EnablePageFlip" "true"
EndSection
Section "Screen"
Identifier "Configured Default Screen"
Device "Medion Radeon 9600 TX"
Monitor "FUS C19-3"
EndSection
Section "ServerLayout"
Identifier "X.org Configured"
Screen "Configured Default Screen"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux gollum 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009 i686
Build Date: 28 May 2009 10:40:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 14 11:51:10 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Configured Default Screen" (0)
(**) | |-->Monitor "FUS C19-3"
(**) | |-->Device "Medion Radeon 9600 TX"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc R300 NF [Radeon 9600 TX] rev 0, Mem @ 0xd8000000/134217728, 0xc7800000/65536, I/O @ 0x0000d800/256, BIOS @ 0x????????/131072
(--) PCI: (0@1:0:1) ATI Technologies Inc RV350 NF [Radeon 9600] (Secondary) rev 0, Mem @ 0xc8000000/134217728, 0xc7000000/65536
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
ATI Mobility RADEON M98, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD Graphics, ATI Radeon Graphics,
ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
ATI Radeon Graphics
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000c7800000
(II) RADEON(0): MMIO registers at 0x00000000c7800000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Configured Default Screen" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "EnablePageFlip" "true"
(**) RADEON(0): Option "AccelMethod" "EXA"
(**) RADEON(0): Option "DRI" "true"
(**) RADEON(0): Option "EXAVSync" "true"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon 9600TX NF (AGP)" (ChipID = 0x4e46)
(--) RADEON(0): Linear framebuffer at 0x00000000d8000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(**) RADEON(0): Page Flipping enabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 1 PCI interface in multifunction mode, accessible memory limited to one aperture
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 40, max_in_pll: 3000, xclk: 27000, sclk: 297.000000, mclk: 270.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=27000
(II) RADEON(0): Output VGA-1 using monitor section FUS C19-3
(II) RADEON(0): I2C bus "VGA-1" initialized.
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: PAL
(II) RADEON(0): TV standards supported by chip: NTSC PAL
(II) RADEON(0): Port0:
XRANDR name: VGA-1
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
(II) RADEON(0): Port1:
XRANDR name: VGA-0
Connector: VGA
CRT2: INTERNAL_DAC2
DDC reg: 0x64
(II) RADEON(0): Port2:
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
(II) RADEON(0): I2C device "VGA-1:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-1:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "FUS", prod id 1394
(II) RADEON(0): Using EDID range info for horizontal sync
(II) RADEON(0): Using EDID range info for vertical refresh
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Output: VGA-1, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-1 ----------------------
(II) RADEON(0): Manufacturer: FUS Model: 572 Serial#: 15631
(II) RADEON(0): Year: 2005 Week: 13
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.07
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.629 redY: 0.354 greenX: 0.286 greenY: 0.598
(II) RADEON(0): blueX: 0.145 blueY: 0.103 whiteX: 0.300 whiteY: 0.335
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) RADEON(0): #4: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) RADEON(0): #5: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: YEHN015631
(II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: C19-3
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ab372050f3d0000
(II) RADEON(0): 0d0f010368261e6b2a241fa15a499925
(II) RADEON(0): 1a4c55a54f00818f8180614f6140454f
(II) RADEON(0): 454001010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000ff00594548
(II) RADEON(0): 4e3031353633310a2020000000fd0037
(II) RADEON(0): 4c1e530e000a202020202020000000fc
(II) RADEON(0): 004331392d330a202020202020200005
finished output detect: 0
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): EDID vendor "FUS", prod id 1394
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Output: VGA-1, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-1 ----------------------
(II) RADEON(0): Manufacturer: FUS Model: 572 Serial#: 15631
(II) RADEON(0): Year: 2005 Week: 13
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.07
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.629 redY: 0.354 greenX: 0.286 greenY: 0.598
(II) RADEON(0): blueX: 0.145 blueY: 0.103 whiteX: 0.300 whiteY: 0.335
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) RADEON(0): #4: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) RADEON(0): #5: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: YEHN015631
(II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: C19-3
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ab372050f3d0000
(II) RADEON(0): 0d0f010368261e6b2a241fa15a499925
(II) RADEON(0): 1a4c55a54f00818f8180614f6140454f
(II) RADEON(0): 454001010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000ff00594548
(II) RADEON(0): 4e3031353633310a2020000000fd0037
(II) RADEON(0): 4c1e530e000a202020202020000000fc
(II) RADEON(0): 004331392d330a202020202020200005
(II) RADEON(0): EDID vendor "FUS", prod id 1394
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-1 connected
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output VGA-1 using initial mode 1280x1024
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (380, 300) mm
(**) RADEON(0): DPI set to (85, 101)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) RADEON(0): Using EXA acceleration architecture
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1920
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit d8000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0xdfffd800
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 131072 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x005dc000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x005e0000
(II) RADEON(0): Will use 6000 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 6000 kb for back buffer at offset 0x005e4000
(II) RADEON(0): Will use 6000 kb for depth buffer at offset 0x00bc0000
(II) RADEON(0): Will use 56320 kb for textures at offset 0x0119c000
(II) RADEON(0): Will use 56720 kb for X Server offscreen at offset 0x0489c000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x2560; Card 0x1002/0x4e46 0x1787/0x8486]
(II) RADEON(0): [agp] 32768 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xb7804000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb7803000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xaf567000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xad8e7000
(II) RADEON(0): [drm] register handle = 0x28f00000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xdfffd800 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xdfffd800 is: 0xdfffd800
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xe1ffe000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xdfffd800 0xdfffd800
(II) RADEON(0): MC_AGP_LOCATION : 0xe1ffe000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(II) RADEON(0): EXA VSync enabled
(II) RADEON(0): num quad-pipes is 2
(II) EXA(0): Offscreen pixmap area of 58081280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) RADEON(0): Acceleration enabled
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
disable primary dac
disable TVDAC
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xdfffd800 0xdfffd800
(II) RADEON(0): MC_AGP_LOCATION : 0xe1ffe000
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TVDAC
disable TV
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 376 x 301
(II) RADEON(0): Damage tracking initialized for page flipping
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB-PS/2 Mouse M-BA47
(**) Logitech USB-PS/2 Mouse M-BA47: always reports core events
(**) Logitech USB-PS/2 Mouse M-BA47: Device: "/dev/input/event5"
(II) Logitech USB-PS/2 Mouse M-BA47: Found 4 mouse buttons
(II) Logitech USB-PS/2 Mouse M-BA47: Found x and y relative axes
(II) Logitech USB-PS/2 Mouse M-BA47: Found scroll wheel(s)
(II) Logitech USB-PS/2 Mouse M-BA47: Configuring as mouse
(**) Logitech USB-PS/2 Mouse M-BA47: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Mouse M-BA47: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Mouse M-BA47" (type: MOUSE)
(**) Logitech USB-PS/2 Mouse M-BA47: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Mouse M-BA47: (accel) filter chain progression: 2.00
(**) Logitech USB-PS/2 Mouse M-BA47: (accel) filter stage 0: 20.00 ms
(**) Logitech USB-PS/2 Mouse M-BA47: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "lv3:ralt_switch_multikey"
(II) RADEON(0): EDID vendor "FUS", prod id 1394
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Output: VGA-1, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-1 ----------------------
(II) RADEON(0): Manufacturer: FUS Model: 572 Serial#: 15631
(II) RADEON(0): Year: 2005 Week: 13
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.07
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.629 redY: 0.354 greenX: 0.286 greenY: 0.598
(II) RADEON(0): blueX: 0.145 blueY: 0.103 whiteX: 0.300 whiteY: 0.335
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) RADEON(0): #4: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) RADEON(0): #5: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: YEHN015631
(II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: C19-3
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ab372050f3d0000
(II) RADEON(0): 0d0f010368261e6b2a241fa15a499925
(II) RADEON(0): 1a4c55a54f00818f8180614f6140454f
(II) RADEON(0): 454001010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000ff00594548
(II) RADEON(0): 4e3031353633310a2020000000fd0037
(II) RADEON(0): 4c1e530e000a202020202020000000fc
(II) RADEON(0): 004331392d330a202020202020200005
(II) RADEON(0): EDID vendor "FUS", prod id 1394
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "FUS", prod id 1394
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Output: VGA-1, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-1 ----------------------
(II) RADEON(0): Manufacturer: FUS Model: 572 Serial#: 15631
(II) RADEON(0): Year: 2005 Week: 13
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) RADEON(0): Sync: Separate
(II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.07
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.629 redY: 0.354 greenX: 0.286 greenY: 0.598
(II) RADEON(0): blueX: 0.145 blueY: 0.103 whiteX: 0.300 whiteY: 0.335
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) RADEON(0): #3: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) RADEON(0): #4: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) RADEON(0): #5: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: YEHN015631
(II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: C19-3
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff001ab372050f3d0000
(II) RADEON(0): 0d0f010368261e6b2a241fa15a499925
(II) RADEON(0): 1a4c55a54f00818f8180614f6140454f
(II) RADEON(0): 454001010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000ff00594548
(II) RADEON(0): 4e3031353633310a2020000000fd0037
(II) RADEON(0): 4c1e530e000a202020202020000000fc
(II) RADEON(0): 004331392d330a202020202020200005
(II) RADEON(0): EDID vendor "FUS", prod id 1394
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) AIGLX: Suspending AIGLX clients for VT switch
disable primary dac
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x1fff0000 0xdfffd800
(II) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
Last edited by Tristero (2009-06-14 11:07:32)

First I tried to force the monitor into 1280x1024@75 mode which does not show the flicker. In three horizontal areas in the screen, the display was very fuzzy. So I had to decide whether use 60Hz mode with the flicker problem or use 75 Hz mode with the fuzzyness problem.
I tried the first alternative by ignoring the EDID data and force the display mode but I didn't succeed with solving the fuzzyness problem. So I decided to go back to 60 Hz mode and try to solve the flicker problem. (I already tried 'Option "Flicker" "false" - no effect!) I have no more ideas.
Last edited by Tristero (2009-06-15 08:37:23)

Xorg 1.8.1.902 & Catalyst 10.6-5 & Mobility Radeon HD 2600

Hello all,
I'm reporting in with an error that I can't seem to shake since the Xorg 1.8 and Catalyst 10.6 release. I have been unable to get the two to place nice with the Mobility Radeon HD 2600 in my HP Compaq 8510p notebook. I've followed the instructions on the Arch ATI Catalyst wiki using the repository approach. Everything installs correctly and I've configured the xorg.conf as instructed in the wiki. I actually just delete the existing xorg.conf and run aticonfig --initial, but still no dice. I've made sure that I have the fglrx module loaded in my rc.conf.
When GDM tries to start, it freaks out with the screen flashing a few times and then crashes saying too many attempts to start X. I login and try to start X manually and it produces the following log file:
[ 24.874]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 24.874]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 24.874] X Protocol Version 11, Revision 0
[ 24.874] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 24.874] Current Operating System: Linux gizmo 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010 x86_64
[ 24.874] Kernel command line: root=/dev/disk/by-uuid/56888501-5e9b-4251-8d84-20eee8a125ce ro nomodeset
[ 24.875] Build Date: 21 June 2010 12:01:49PM
[ 24.875]
[ 24.875] Current version of pixman: 0.18.2
[ 24.875] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.875] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.875] (==) Log file: "/var/log/Xorg.1.log", Time: Fri Jul 23 19:47:16 2010
[ 24.875] (==) Using config file: "/etc/X11/xorg.conf"
[ 24.876] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 24.876] (==) ServerLayout "aticonfig Layout"
[ 24.876] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 24.876] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 24.876] (**) | |-->Device "aticonfig-Device[0]-0"
[ 24.876] (==) Automatically adding devices
[ 24.877] (==) Automatically enabling devices
[ 24.877] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 24.877] Entry deleted from font path.
[ 24.877] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 24.877] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.877] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 24.877] (II) Loader magic: 0x7ce880
[ 24.877] (II) Module ABI versions:
[ 24.877] X.Org ANSI C Emulation: 0.4
[ 24.877] X.Org Video Driver: 7.0
[ 24.877] X.Org XInput driver : 9.0
[ 24.877] X.Org Server Extension : 3.0
[ 24.888] (--) PCI:*(0:1:0:0) 1002:9581:103c:30c5 ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series] rev 0, Mem @ 0xd0000000/268435456, 0xe4400000/65536, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 24.888] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 24.888] (II) "extmod" will be loaded by default.
[ 24.888] (II) "dbe" will be loaded by default.
[ 24.888] (II) "glx" will be loaded by default.
[ 24.888] (II) "record" will be loaded by default.
[ 24.888] (II) "dri" will be loaded by default.
[ 24.888] (II) "dri2" will be loaded by default.
[ 24.888] (II) LoadModule: "extmod"
[ 24.888] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 24.888] (II) Module extmod: vendor="X.Org Foundation"
[ 24.888] compiled for 1.8.1.902, module version = 1.0.0
[ 24.888] Module class: X.Org Server Extension
[ 24.888] ABI class: X.Org Server Extension, version 3.0
[ 24.888] (II) Loading extension MIT-SCREEN-SAVER
[ 24.888] (II) Loading extension XFree86-VidModeExtension
[ 24.888] (II) Loading extension XFree86-DGA
[ 24.888] (II) Loading extension DPMS
[ 24.888] (II) Loading extension XVideo
[ 24.888] (II) Loading extension XVideo-MotionCompensation
[ 24.888] (II) Loading extension X-Resource
[ 24.888] (II) LoadModule: "dbe"
[ 24.888] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 24.888] (II) Module dbe: vendor="X.Org Foundation"
[ 24.888] compiled for 1.8.1.902, module version = 1.0.0
[ 24.888] Module class: X.Org Server Extension
[ 24.889] ABI class: X.Org Server Extension, version 3.0
[ 24.889] (II) Loading extension DOUBLE-BUFFER
[ 24.889] (II) LoadModule: "glx"
[ 24.889] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.889] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 24.889] compiled for 7.5.0, module version = 1.0.0
[ 24.889] (II) Loading extension GLX
[ 24.889] (II) LoadModule: "record"
[ 24.889] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 24.889] (II) Module record: vendor="X.Org Foundation"
[ 24.889] compiled for 1.8.1.902, module version = 1.13.0
[ 24.889] Module class: X.Org Server Extension
[ 24.889] ABI class: X.Org Server Extension, version 3.0
[ 24.889] (II) Loading extension RECORD
[ 24.889] (II) LoadModule: "dri"
[ 24.889] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 24.889] (II) Module dri: vendor="X.Org Foundation"
[ 24.889] compiled for 1.8.1.902, module version = 1.0.0
[ 24.889] ABI class: X.Org Server Extension, version 3.0
[ 24.889] (II) Loading extension XFree86-DRI
[ 24.889] (II) LoadModule: "dri2"
[ 24.889] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.889] (II) Module dri2: vendor="X.Org Foundation"
[ 24.889] compiled for 1.8.1.902, module version = 1.2.0
[ 24.889] ABI class: X.Org Server Extension, version 3.0
[ 24.889] (II) Loading extension DRI2
[ 24.890] (II) LoadModule: "fglrx"
[ 24.890] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 24.898] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 24.898] compiled for 1.7.1, module version = 8.74.4
[ 24.898] Module class: X.Org Video Driver
[ 24.898] (II) Loading sub module "fglrxdrm"
[ 24.899] (II) LoadModule: "fglrxdrm"
[ 24.899] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 24.899] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 24.899] compiled for 1.7.1, module version = 8.74.4
[ 24.899] (II) ATI Proprietary Linux Driver Version Identifier:8.74.4
[ 24.899] (II) ATI Proprietary Linux Driver Release Identifier: 8.741
[ 24.899] (II) ATI Proprietary Linux Driver Build Date: May 27 2010 12:52:57
[ 24.899] (--) using VT number 7
[ 24.900] (II) Primary Device is: PCI 01@00:00:0
[ 24.900] (WW) Falling back to old probe method for fglrx
[ 24.904] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 24.904] (--) Chipset Supported AMD Graphics Processor (0x9581) found
[ 24.905] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 24.905] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 24.905] (II) AMD Video driver is signed
[ 24.905] (II) fglrx(0): pEnt->device->identifier=0x1dcbc70
[ 24.905] (II) fglrx(0): === [atiddxPreInit] === begin
[ 24.905] (II) Loading sub module "vgahw"
[ 24.905] (II) LoadModule: "vgahw"
[ 24.905] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 24.905] (II) Module vgahw: vendor="X.Org Foundation"
[ 24.905] compiled for 1.8.1.902, module version = 0.1.0
[ 24.905] ABI class: X.Org Video Driver, version 7.0
[ 24.905] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 24.905] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 24.905] (==) fglrx(0): Default visual is TrueColor
[ 24.905] (**) fglrx(0): Option "DPMS" "true"
[ 24.905] (==) fglrx(0): RGB weight 888
[ 24.905] (II) fglrx(0): Using 8 bits per RGB
[ 24.905] (==) fglrx(0): Buffer Tiling is ON
[ 24.905] (II) Loading sub module "fglrxdrm"
[ 24.905] (II) LoadModule: "fglrxdrm"
[ 24.906] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 24.907] ukiDynamicMajor: found major device number 253
[ 24.907] ukiDynamicMajor: found major device number 253
[ 24.907] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 24.907] ukiOpenDevice: node name is /dev/ati/card0
[ 24.907] ukiOpenDevice: open result is 10, (OK)
[ 24.907] ukiOpenByBusid: ukiOpenMinor returns 10
[ 24.907] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 24.907] (==) fglrx(0): NoAccel = NO
[ 24.907] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 24.907] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 2600" (Chipset = 0x9581)
[ 24.907] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30c5)
[ 24.907] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 24.907] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 24.907] (--) fglrx(0): MMIO registers at 0xe4400000
[ 24.907] (--) fglrx(0): I/O port at 0x00004000
[ 24.907] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 24.907] (II) fglrx(0): AC Adapter is used
[ 24.909] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 25.033] (II) Loading sub module "vbe"
[ 25.033] (II) LoadModule: "vbe"
[ 25.033] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 25.033] (II) Module vbe: vendor="X.Org Foundation"
[ 25.033] compiled for 1.8.1.902, module version = 1.1.0
[ 25.033] ABI class: X.Org Video Driver, version 7.0
[ 25.033] (II) fglrx(0): VESA BIOS detected
[ 25.033] (II) fglrx(0): VESA VBE Version 3.0
[ 25.033] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 25.033] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 25.033] (II) fglrx(0): VESA VBE OEM Software Rev: 10.56
[ 25.033] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 25.033] (II) fglrx(0): VESA VBE OEM Product: M76M
[ 25.033] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 25.063] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 25.063] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
[ 25.063] (II) fglrx(0): PCIE card detected
[ 25.063] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 25.063] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 25.065] (II) fglrx(0): Using adapter: 1:0.0.
[ 25.097] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 25.129] (II) fglrx(0): Interrupt handler installed at IRQ 33.
[ 25.129] (II) fglrx(0): RandR 1.2 support is enabled!
[ 25.129] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 25.129] (==) fglrx(0): Center Mode is disabled
[ 25.129] (II) Loading sub module "fb"
[ 25.129] (II) LoadModule: "fb"
[ 25.129] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.129] (II) Module fb: vendor="X.Org Foundation"
[ 25.129] compiled for 1.8.1.902, module version = 1.0.0
[ 25.129] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.129] (II) Loading sub module "ddc"
[ 25.129] (II) LoadModule: "ddc"
[ 25.129] (II) Module "ddc" already built-in
[ 25.395] (II) fglrx(0): Finished Initialize PPLIB!
[ 25.397] (II) Loading sub module "ddc"
[ 25.397] (II) LoadModule: "ddc"
[ 25.397] (II) Module "ddc" already built-in
[ 25.397] (II) fglrx(0): Connected Display0: LCD on internal LVDS [lvds]
[ 25.397] (II) fglrx(0): Display0 EDID data ---------------------------
[ 25.397] (II) fglrx(0): Manufacturer: CMO Model: 1520 Serial#: 0
[ 25.397] (II) fglrx(0): Year: 1990 Week: 0
[ 25.397] (II) fglrx(0): EDID Version: 1.3
[ 25.397] (II) fglrx(0): Digital Display Input
[ 25.397] (II) fglrx(0): Max Image Size [cm]: horiz.: 33 vert.: 20
[ 25.397] (II) fglrx(0): Gamma: 2.20
[ 25.397] (II) fglrx(0): No DPMS capabilities specified
[ 25.397] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 25.397] (II) fglrx(0): First detailed timing is preferred mode
[ 25.397] (II) fglrx(0): redX: 0.626 redY: 0.354 greenX: 0.294 greenY: 0.589
[ 25.397] (II) fglrx(0): blueX: 0.144 blueY: 0.097 whiteX: 0.309 whiteY: 0.329
[ 25.397] (II) fglrx(0): Manufacturer's mask: 0
[ 25.397] (II) fglrx(0): Supported detailed timing:
[ 25.397] (II) fglrx(0): clock: 131.5 MHz Image Size: 331 x 207 mm
[ 25.397] (II) fglrx(0): h_active: 1680 h_sync: 1771 h_sync_end 1831 h_blank_end 1978 h_border: 0
[ 25.397] (II) fglrx(0): v_active: 1050 v_sync: 1056 v_sync_end 1068 v_blanking: 1108 v_border: 0
[ 25.397] (II) fglrx(0): N154Z1-L01
[ 25.397] (II) fglrx(0): CMO
[ 25.397] (II) fglrx(0): N154Z1-L01
[ 25.397] (II) fglrx(0): EDID (in hex):
[ 25.397] (II) fglrx(0): 00ffffffffffff000daf201500000000
[ 25.397] (II) fglrx(0): 00000103802114780a77f1a05a4b9624
[ 25.397] (II) fglrx(0): 184f5400000001010101010101010101
[ 25.397] (II) fglrx(0): 0101010101015e33902a611a3a405b3c
[ 25.397] (II) fglrx(0): 6c004bcf10000018000000fe004e3135
[ 25.397] (II) fglrx(0): 345a312d4c30310a2020000000fe0043
[ 25.397] (II) fglrx(0): 4d4f0a202020202020202020000000fe
[ 25.397] (II) fglrx(0): 004e3135345a312d4c30310a202000f2
[ 25.397] (II) fglrx(0): End of Display0 EDID data --------------------
[ 25.397] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 25.397] (II) fglrx(0): Output DFP1 has no monitor section
[ 25.397] (II) fglrx(0): Output DFP2 has no monitor section
[ 25.397] (II) fglrx(0): Output CRT1 has no monitor section
[ 25.397] (II) fglrx(0): Output TV has no monitor section
[ 25.397] (II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
[ 25.552] (II) fglrx(0): EDID vendor "CMO", prod id 5408
[ 25.552] (II) fglrx(0): Printing DDC gathered Modelines:
[ 25.553] (II) fglrx(0): Modeline "1680x1050"x0.0 131.50 1680 1771 1831 1978 1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
[ 25.553] (II) fglrx(0): Output LVDS connected
[ 25.553] (II) fglrx(0): Output DFP1 disconnected
[ 25.553] (II) fglrx(0): Output DFP2 disconnected
[ 25.553] (II) fglrx(0): Output CRT1 disconnected
[ 25.553] (II) fglrx(0): Output TV disconnected
[ 25.553] (II) fglrx(0): Output COMPONENT_VIDEO disconnected
[ 25.553] (II) fglrx(0): Using exact sizes for initial modes
[ 25.553] (II) fglrx(0): Output LVDS using initial mode 1680x1050
[ 25.553] (II) fglrx(0): Display dimensions: (330, 200) mm
[ 25.553] (II) fglrx(0): DPI set to (129, 133)
[ 25.553] (II) fglrx(0): Adapter ATI Mobility Radeon HD 2600 has 2 configurable heads and 1 displays connected.
[ 25.553] (==) fglrx(0): QBS disabled
[ 25.553] (==) fglrx(0): PseudoColor visuals disabled
[ 25.553] (II) Loading sub module "ramdac"
[ 25.553] (II) LoadModule: "ramdac"
[ 25.553] (II) Module "ramdac" already built-in
[ 25.553] (==) fglrx(0): NoDRI = NO
[ 25.553] (==) fglrx(0): Capabilities: 0x00000000
[ 25.553] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 25.553] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 25.553] (==) fglrx(0): UseFastTLS=0
[ 25.553] (==) fglrx(0): BlockSignalsOnLock=1
[ 25.553] (--) Depth 24 pixmap format is 32 bpp
[ 25.553] (II) Loading extension ATIFGLRXDRI
[ 25.553] (II) fglrx(0): doing swlDriScreenInit
[ 25.553] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 25.553] ukiDynamicMajor: found major device number 253
[ 25.553] ukiDynamicMajor: found major device number 253
[ 25.553] ukiDynamicMajor: found major device number 253
[ 25.553] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 25.553] ukiOpenDevice: node name is /dev/ati/card0
[ 25.553] ukiOpenDevice: open result is 15, (OK)
[ 25.553] ukiOpenByBusid: ukiOpenMinor returns 15
[ 25.553] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 25.553] (II) fglrx(0): [uki] DRM interface version 1.0
[ 25.553] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 25.553] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x10000
[ 25.553] (II) fglrx(0): [uki] mapped SAREA 0x10000 to 0x7f2043e35000
[ 25.553] (II) fglrx(0): [uki] framebuffer handle = 0x11000
[ 25.554] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 25.554] (II) fglrx(0): swlDriScreenInit done
[ 25.554] (II) fglrx(0): Kernel Module Version Information:
[ 25.554] (II) fglrx(0): Name: fglrx
[ 25.554] (II) fglrx(0): Version: 8.74.4
[ 25.554] (II) fglrx(0): Date: May 27 2010
[ 25.554] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 25.554] (II) fglrx(0): Kernel Module version matches driver.
[ 25.554] (II) fglrx(0): Kernel Module Build Time Information:
[ 25.554] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.34-ARCH
[ 25.554] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 25.554] (II) fglrx(0): Build-Kernel __SMP__: no
[ 25.554] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 25.554] (II) fglrx(0): [uki] register handle = 0x00012000
[ 25.571] (II) fglrx(0): Display width adjusted to to 1792 due to alignment constraints
[ 25.571] (II) fglrx(0): DRI initialization successfull!
[ 25.571] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x010a0000
[ 25.571] (II) fglrx(0): FBMM initialized for area (0,0)-(1792,2432)
[ 25.571] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1792,1792) (front color buffer - assumption)
[ 25.571] (II) fglrx(0): Largest offscreen area available: 1792 x 640
[ 25.571] (==) fglrx(0): Backing store disabled
[ 25.571] (II) Loading extension FGLRXEXTENSION
[ 25.572] (**) fglrx(0): DPMS enabled
[ 25.572] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 25.572] (**) fglrx(0): Textured Video is enabled.
[ 25.572] (II) LoadModule: "glesx"
[ 25.572] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 25.572] (II) Module glesx: vendor="X.Org Foundation"
[ 25.572] compiled for 1.7.1, module version = 1.0.0
[ 25.573] (II) Loading extension GLESX
[ 25.573] (II) fglrx(0): GLESX enableFlags = 592
[ 25.573] (II) fglrx(0): GLESX is enabled
[ 25.573] (II) fglrx(0): Acceleration enabled
[ 25.573] (II) LoadModule: "amdxmm"
[ 25.573] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 25.573] (II) Module amdxmm: vendor="X.Org Foundation"
[ 25.573] compiled for 1.7.1, module version = 1.0.0
[ 25.573] (II) Loading extension AMDXVOPL
[ 25.575] (II) fglrx(0): UVD2 feature is available
[ 25.577] (II) fglrx(0): Enable composite support successfully
[ 25.577] (WW) fglrx(0): Option "VendorName" is not used
[ 25.577] (WW) fglrx(0): Option "ModelName" is not used
[ 25.577] (II) fglrx(0): X context handle = 0x1
[ 25.577] (II) fglrx(0): [DRI] installation complete
[ 25.577] (==) fglrx(0): Silken mouse enabled
[ 25.577] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 25.577] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 25.577] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 25.577] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 25.579] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[ 25.579] (II) fglrx(0): Cannot set TV horizontal size.
[ 25.579] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
[ 25.579] (II) fglrx(0): Cannot set TV horizontal position.
[ 25.579] (II) fglrx(0): Cannot set TV vertical position.
[ 25.614] (--) RandR disabled
[ 25.614] (II) Initializing built-in extension Generic Event Extension
[ 25.614] (II) Initializing built-in extension SHAPE
[ 25.614] (II) Initializing built-in extension MIT-SHM
[ 25.614] (II) Initializing built-in extension XInputExtension
[ 25.614] (II) Initializing built-in extension XTEST
[ 25.614] (II) Initializing built-in extension BIG-REQUESTS
[ 25.614] (II) Initializing built-in extension SYNC
[ 25.614] (II) Initializing built-in extension XKEYBOARD
[ 25.614] (II) Initializing built-in extension XC-MISC
[ 25.614] (II) Initializing built-in extension SECURITY
[ 25.614] (II) Initializing built-in extension XINERAMA
[ 25.614] (II) Initializing built-in extension XFIXES
[ 25.614] (II) Initializing built-in extension RENDER
[ 25.614] (II) Initializing built-in extension RANDR
[ 25.614] (II) Initializing built-in extension COMPOSITE
[ 25.614] (II) Initializing built-in extension DAMAGE
[ 25.616] ukiDynamicMajor: found major device number 253
[ 25.616] ukiDynamicMajor: found major device number 253
[ 25.616] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 25.616] ukiOpenDevice: node name is /dev/ati/card0
[ 25.616] ukiOpenDevice: open result is 16, (OK)
[ 25.616] ukiOpenByBusid: ukiOpenMinor returns 16
[ 25.616] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 25.661]
Backtrace:
[ 25.661] 0: /usr/bin/Xorg (xorg_backtrace+0x28) [0x498588]
[ 25.661] 1: /usr/bin/Xorg (0x400000+0x672d9) [0x4672d9]
[ 25.661] 2: /lib/libpthread.so.0 (0x7f2043180000+0xf1c0) [0x7f204318f1c0]
[ 25.661] Segmentation fault at address (nil)
[ 25.661]
Fatal server error:
[ 25.661] Caught signal 11 (Segmentation fault). Server aborting
[ 25.661]
[ 25.661]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 25.661] Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[ 25.661]
[ 25.661] (II) fglrx(0): Backup framebuffer data.
[ 25.661] (EE) fglrx(0): total backup size zero
[ 25.661] (II) fglrx(0): Backup complete.
Any help would be greatly appreciated.

skottish wrote:
Welcome to the forums.
Please don't post general issues in this sub-forum. Moving...
Oops, my bad.
As for my issue(s), I'm not going to bother with the proprietary driver until AMD gets their act together.

4.01 automatic update today 4.29.11, now pages will NOT load at all, just hangs there saying connecting. Tried system restore, re-installing, only way to get it to work is to boot in safe mode. Running W7, 64bit, I5, 2.53 ghz, 4GB, ati radeon 5470

I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470

I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470

How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
The Background/history
I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8. I created a single partitioned drive to install windows 7 professional 64 bit. The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in....
The installation of Windows 7 Pro 64-bit
So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black.... in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
The problem, re-emphasized : I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files? not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run... Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver without having been able to complete the windows 7 installation because the monitor goes and stays black????
This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
---I've been told to install the osx dvd and run "setup.exe" - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/ for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something? if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean? it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this? just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600? (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

RESOLUTION: GNB MAX and Radeon 9700 Crashes

I had various lock-ups, crashes and "Windows detected and recovered from a device failure" error messages with my GNB MAX motherboard and Radeon 9700 and they are now fixed.
I was able to receive a beta version of an upcoming set of drivers from ATI and they did the trick!!
Just wanted to give you all some hope.
Hang in there!

Oops, I spoke too soon. I think FastWrites is on (I remember turning it off before on previous drivers and noticing a big slow down that is not present now) but there isn't a SmartGart tab appearing in my ATI control panel any more. I checked Advanced - Options - Details and yes, 8X is on.
How can I verify that FastWrites is on without the SmartGart tab?

Having trouble installing Radeon 7500 into K7T266 Pro

I am having all sorts of problems switching from my nVidia TNT 2 (MaxiGamer Cougar) video card to my new Radeon 7500. I am running an AMD Athlon 1400 with 512 MB DDR RAM.
I have the K7T266 Pro (MS-6380) chipset.
Can anyone think of what I am missing here. I think I have all the updates AGP drivers I need but I am not sure. I get lock ups prior to windows starting everytime. Even in safe mode.
Grrrr.

I ended having to format my c drive. Windows began doing some really funny things and then never started again with old or new video cards. I have re-installed windows but now sometimes my monitor stays blank when I start the computer. It is supposed to wake itself up but when it does, it has no picture. To solve this I shut down and flick the switch on the back and discharge everything. It then works again for another few times. Do you think this may be a problem with my power supply? I have an Enermax 350W. I bought it when I built the computer and figured it would have plenty of juice.
Thanks for you help

K7N2 Delta-L - RADEON 9800SE AiW Power Up Problem

SYSTEM:
K7N2 Delta-L ( BIOS updated to w6570nms.560 - v5.6 )
AMD 2600XP
512MB Crucial RAM
Adaptec SCSI 39160
Sapphire Radeon 9800SE AiW
Antec 480W True Power PSU
+5V ( 0A - 38A )
+12V ( 0.8A - 22A )
+3.3V 0A - 30A )
PROBLEM:
I've just got the Radeon card and installed it. Everything is connected fine inc. the extra power supply for the card. Now, when I switch on the PC, it only powers up for a split second and then everything shuts off. When I disconnect the extra power supply to the radeon card the PC boots up fine, except for a message from the card saying it needs power. Some other users on this forum had a similar problem.
So is this a problem with the K7N2 Delta-L board or with my Antec PSU ? Surely 480W and the above AMP output should be enough.
Anyone got a fix for this ?
THX for any help
P.S. I've also tried this card in an older PC ( ECS K7S6A - 1800XP - Qtec 550W ) and I didn't experience the problem above.

The Antec PSU is fine, I tried different plugs and it still didn't work.
The Qtec PSU is fine as well but not as quite as the Antec.
I think the Antec PSU doesn't work because of its overloading protection. The Radeon card probably sucks quite some power when the PC is switched on.
I've spend the last two days finding an answer to my problem, and other users experienced a similar thing.
Oh well, guess I have to live with the loud Qtec for a while and in the meantime try to get an answer from Antec.
Thx

K7N2 Delta-ILSR - Radeon 9700 pro - no power.

K7N2 Delta - ILSR (6570)
AMD Athlon XP2800+ (Barton)
nVidia GeForce III 64mb
1GB Samsung PC3200 400MHz DDR Original [2x512MB] [Checked nVidia site = Compatible]
40gb + 80gb Hard Drives
Sony DVD burner
500wat psu 3.3 - 28 / 5 - 40 / 12 - 17
3 extra fans
2 Cathodes
1 EL Cable
Windows XP pro SP2. [all drivers and Bios are upto date]
Everything works 100%
Sapphire Radeon 9700 Pro... No fans, No lights No DVD and 1 Hard Drive.
Power on... Continuous short BEEPS... Monitor comes on with the message "NO POWER CONNECTED TO RADEON"
The Radeon mostly worked for over a year, [trouble booting cold] now it does'nt. [not with my MSI]
The card works with my old board, LEX BN790E via KT266A, 512mb, AMD XP1700+ and all extras.
I have been building my own P.C's for years. Starting with a 386sx, a huge 2mg of ram and Windows 3.11
Everything is connected as it should be.

Quote
The Radeon mostly worked for over a year, [trouble booting cold] now it does'nt. [not with my MSI]
The card works with my old board, LEX BN790E via KT266A, 512mb, AMD XP1700+ and all extras.
that is suggesting to me either your PSU is failing, or it is a Poor PSU with over-optimistic amp ratings (eg Q-Tec). it will all appear to work fine on your older board, as that has lower power requirements, have a look in my sticky Is your problem caused by your PSU? for more info and advice.
Quote
Could people please read the entire post and NOT just the title.
that was a bit rude. people try to help by asking questions and giving suggestions. making responses like that is more likely to make people ignore this topic. Please read and comply with the Forum Rules.

Dual Radeon video card -- Second card Unknown/4th monitor

My initial plan was to use four monitors on my Radeon HD 6790 as follows:
1 Single-link DVI-D = monitor1 dvi
1 Dual-link DVI-I = monitor2 dvi
1 Display Port = monitor3 dvi with adapter
1 HDMI = new monitor
This did not work as I could not use the hdmi port with the second dvi plugged in so I decided to buy a second cheaper ati card (the 6450) to power the fourth monitor. Well of course that did not work as well since the 2nd video card was identified as UNKNOWN via the Ctalyst control Center(amdcccle).
This is how I currently have my monitors plugged in:
6790 (Main card):
1x dvi
1x dvi via DisplayPort
1x hdmi
6450 (Secondary card):
1x dvi
I tried for two days to get the second card identified by the Catalyst driver and I ended up borking my system in the process. So now I am on week two of getting this setup to work with no avail so I decided to post a new thread.
Here is some relevant information that may help:
╔═ comhack@Cerberus 11:14 AM
╚═══ ~-> uname -a
Linux Cerberus 3.3.7-1-ARCH #1 SMP PREEMPT Tue May 22 00:26:26 CEST 2012 x86_64 GNU/Linux
╔═ comhack@Cerberus 10:50 AM
╚═══ ~-> lspci | grep VGA
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Barts LE [AMD Radeon HD 6700 Series]
02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Caicos [Radeon HD 6450]
╔═ comhack@Cerberus 11:50 AM
╚═══ ~-> pacman -Qi xorg-server | grep Version
Version : 1.11.4-1
╔═ comhack@Cerberus 10:50 AM
╚═══ ~-> xrandr
Screen 0: minimum 320 x 200, current 5440 x 1084, maximum 5440 x 1920
DFP1 connected 1600x900+3840+0 (normal left inverted right x axis y axis) 443mm x 249mm
1600x900 60.0*+
1440x900 60.0
1280x800 59.8
1152x864 75.0 60.0
1280x768 59.8
1280x720 60.0
1024x768 75.0 70.1 60.0
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 67.0 59.9
DFP2 disconnected (normal left inverted right x axis y axis)
DFP3 disconnected (normal left inverted right x axis y axis)
DFP4 disconnected (normal left inverted right x axis y axis)
DFP5 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 520mm x 290mm
1920x1080 60.0*+ 50.0 59.9 30.0 25.0 30.0
1600x1200 60.0
1776x1000 50.0 59.9 25.0 30.0
1680x1050 50.0 60.0
1400x1050 50.0 60.0
1600x900 60.0 50.0
1360x1024 50.0 60.0
1280x1024 50.0 75.0 60.0
1440x900 50.0 59.9
1280x960 50.0 60.0
1152x864 50.0 59.9 75.0
1280x768 50.0 60.0
1280x720 60.0 50.0 59.9
1024x768 50.0 75.0 70.1 60.0
1152x648 50.0 59.9
800x600 50.0 72.2 75.0 60.3 56.2
720x480 50.0 30.0 60.0 30.0 59.9
640x480 50.0 75.0 72.8 67.0 60.0 59.9
DFP6 disconnected (normal left inverted right x axis y axis)
DFP7 connected 1920x1080+0+4 (normal left inverted right x axis y axis) 477mm x 268mm
1920x1080 60.0*+
1680x1050 60.0
1400x1050 60.0
1600x900 60.0
1360x1024 60.0
1280x1024 75.0 60.0
1440x900 59.9
1280x960 60.0
1280x768 60.0
1280x720 60.0
1024x768 75.0 70.1 60.0
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 67.0 59.9
CRT1 disconnected (normal left inverted right x axis y axis)
╔═ comhack@Cerberus 11:02 AM
╚═══ ~/Cerberus-> pacman -Qi catalyst-total | grep Version
Version : 12.4-1
Here is my atisysteminfo: https://github.com/securitybreach/Cerbe … report.txt
My xorg.conf:
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[1]-0" 0 0
EndSection
Section "Monitor"
Identifier "0-DFP1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1600x900"
Option "TargetRefresh" "60"
Option "Position" "3840 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP5"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
Option "Position" "1920 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP7"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
Option "Position" "0 28"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "1-Default monitor"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "480x640"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" ""
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP6"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
Identifier "amdcccle-Device[1]-0"
Driver "fglrx"
Option "Monitor-DFP1" "0-DFP1"
Option "Monitor-DFP5" "0-DFP5"
Option "Monitor-DFP6" "0-DFP6"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "amdcccle-Device[2]-0"
Driver "fglrx"
Option "Monitor-Default monitor" "1-Default monitor"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "amdcccle-Screen[1]-0"
Device "amdcccle-Device[1]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 5440 1920
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "amdcccle-Screen[2]-0"
Device "amdcccle-Device[2]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
https://github.com/securitybreach/Cerbe … g.conf-ati
Notice the fourth monitor is labeled as "1-Default monitor" instead of hdmi (or whatever) and the second card is not listed.
I am literally at my wit's end trying to figure this out. So basically I am wondering if anyone has a clue where to begin trying to get the 2nd video card identified or is it even possible with the current Catalyst driver? I know my hardware can power it fine as it works perfectly on my Windows gaming partition.
Thanks in advance
Last edited by securitybreach (2012-06-01 16:50:47)

I have it working now using catalyst-total but with separate X sessions on each monitor. Not the ideal setup but it works for now.
Here is my xorg.conf for reference:
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[1]-0" 1599 0
Screen "amdcccle-Screen[1]-1" 3518 0
Screen "amdcccle-Screen[1]-2" 5437 0
Screen "amdcccle-Screen[2]-0" 0 0
EndSection
Section "Monitor"
Identifier "0-DFP1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1600x900"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP5"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP7"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "1-DFP2"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1600x900"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
Identifier "amdcccle-Device[1]-0"
Driver "fglrx"
Option "Monitor-DFP5" "0-DFP5"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "amdcccle-Device[2]-0"
Driver "fglrx"
Option "Monitor-DFP2" "1-DFP2"
BusID "PCI:2:0:0"
EndSection
Section "Device"
Identifier "amdcccle-Device[1]-1"
Driver "fglrx"
Option "Monitor-DFP7" "0-DFP7"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Device"
Identifier "amdcccle-Device[1]-2"
Driver "fglrx"
Option "Monitor-DFP1" "0-DFP1"
BusID "PCI:1:0:0"
Screen 2
EndSection
Section "Screen"
Identifier "amdcccle-Screen[1]-0"
Device "amdcccle-Device[1]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "amdcccle-Screen[2]-0"
Device "amdcccle-Device[2]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "amdcccle-Screen[1]-1"
Device "amdcccle-Device[1]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "amdcccle-Screen[1]-2"
Device "amdcccle-Device[1]-2"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I had to manually edit my xorg.conf and add the values for the second video card/fourth monitor. I cannot figure out how to take a screenshot of all 4 X sessions so here is a picture of the setup:
Last edited by securitybreach (2012-06-03 22:49:20)

Is Radeon HD 6450A 24/96 or 24/192

Similar Messages

Maybe you are looking for