Is RAID0 possible with the UltraBay ?

Hello,
I have a 6460-D8G,
If i put another (same) drive in the UltraBay, will the Intel Chipset allow to me to setup a RAID array ? (i think so but ...)
Thanks for your help !

Yes i want to squeeze out hard drive performances, everything has backup somewhere else,
and no concern about battery life.
Actually it's already a 7200rpm configuration;
Product: ThinkPad T61p 6460-D8G [change] Operating system: All [change]Original description: T9300(2.5GHz), 4GB RAM, 160GB 7200rpm HD, 15.4in 1920x1200 LCD, 256MB nVIDIA Quadro FX 570M, CDRW/DVDRW, Intel 802.11agn, Bluetooth, Modem, 1Gb Ethernet, UltraNav, Secure chip, Fingerprint reader, Intel Turbo Memory, 6c Li-Ion, WinVista Ultimate 32
I was thinking of using the same 7200 rpm drive, in RAID0 but i'm not sure if it will work,
I thought it'd be possible thru the Intel Matrix Storage Manager ... but there's nothing related to it in the bios ;
The only problem in this laptop is the storage that slows everything down; otherwise than that it performs very fast .
Do you know if it's possible ?
Thanks,
Message Edited by aybezero on 08-31-2008 05:25 PM
Message Edited by aybezero on 08-31-2008 05:25 PM

Similar Messages

I want the Genius recommendation column back. Is this possible with the latest iTunes? If not, this was a poor decision to remove it :/

I want the Genius recommendation column back. Is this possible with the latest iTunes? If not, this was a poor decision to remove it :/

Hi,
Genius recommendations are available in the itunes Store.
Jim

The demand of my application is that i can not replace for loop with a while loop.because i need fixed number of iterations and as far as i know fixed iterations could be only with possible with the for loop.

the demand of my application is that i can not replace for loop with a while loop.because i need fixed number of iterations and as far as i know fixed iterations could be only with possible with the for loop.
your recommended second option that i could add true/false case.
this true/false case must be inside the for loop or outside the for loop?if this case is inside the for
loop, how can i send stop command from outer while
loop?
more over do you have any example for this please?
thanks"

You can execute a fixed number of iterations using a while loop by comparing the iteration count to the number of iterations you want and wiring the output of that comparison (e.g. Less Than or Equal To) to the continue (or stop) terminal of your while loop. Which comparison you use depends on personal preference, where you wire the desired count and the interation count, and whether you're using the while loop as Continue if True or Stop if True.
Ben gave you step-by-step instructions in response to your previous question. Look here for Ben's response.
Ben's response looks pretty good and detailed to me. It certa
inly deserved better than a 1-star rating.

Is the new maverick download not possible with the version lion?

Is the new maverick download not possible with the version lion?
My version is:
Mac OS X Lion 10.7.5

Should be, you can compatibility here:
http://support.apple.com/kb/HT5842

Before downloading the latest version of I-Tunes, I used to be able to view the ALBUM ARTWORK at bottom left when clicking on a song. I am now unable to see the artwork. Is it no longer possible with the updated software ??

before downloading the latest version of I-Tunes, I used to be able to view the ALBUM ARTWORK at bottom left when clicking on a song.
I am now unable to see the artwork.
Is it no longer possible with the updated software ??

Correct, Apple have removed that feature. However, you can still see the artwork of the song that's playing; it's shown in the Now Playing indicator at the top of the iTunes window. It is small, but if you click on it, a larger version pops up.
Also, in Albums View, you can see the album artwork.

Is USB Tethering possible with the iPad.

Since wireless Tethering isn't secure, I was considering USB Tethering which is. However, is that possible with the iPad?

Hi
You can share your tablets mobile data connection with other devices via USB, Bluetooth or by turning your table into portable Wifi hotspot.
Note; this function is only supported by 3G models.
In option Wireless & Networks you can configure and manage this setting
You can tap More to find out the hidden options.
The option Tethering & portable hotspot settings would provide the possibility (USB tehthering) to share the data connection.

Is the T440p compatible with the Ultrabay battery?

Question in title. I want to know if the T440p is compatible with the ultrabay battery. I don't have any use for the optical drive and I know the ultrabay HDD caddy is awful, so i figure I may as well make use of this extra space.
If not well that's a shame, kind of useless to have such a thick laptop with such a small battery.
Solved!
Go to Solution.

Hello.
The UltraBay HD caddy works perfectly in mine. Got a 9.5mm 1TB drive in it, and it fits very snugly (I of course added the TP rubber rails to the drive as well), performs like a champ and spins down as configured.
I also got UltraBay caddies in my T400 and W520, never had an inkling of problem with them.
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

Is 'feed per rev' axis to spindle interpolation possible with the 7344?

Just evaluating the NI-7344 motion controller for a machine tool application. Whilst axis to axis interpolation functions are well described, it is unclear if it would be possible to synchronize an axis with a continuously rotating spindle. My application would have a rotary spindle drive (under closed loop control) continuously running at around 3000rpm, with TTL encoder feedback. There would then be a single linear axis programmed to move at say, 0.2mm per rev of this spindle, to create a fine 'spiral' on the part. A change of spindle speed would not affect the pich of the spiral. Searches brought up helical interpolation but I think this would not work with a continuously running rotary axis. Any advice welcome. Thanks, Chris.

Hi Chris,
Could I clarify, would you want the spindle drive driven by the card as well or is this externally driven? What is your other motor e.g. servo or stepper? How do you plan to drive this?
I forsee two scenarios on here:
1) If they are both from the same card then effectively what you want is a 2 axis linear move e.g. axis 1 = k*axis 2 and we should be able to do this with the 7344.
2) If the spindle is driven elsewhere and we are driving a stepper motor we could use a counter card to generate x number of pulses to control the stepper per pulses seen from the encoder. This would be a less intelligent motion system but I believe should work.
3) If the spindle is driven elsewhere and we are driving a servo then this will be trickier. Depending on the drive you have we would have to look at what signals we need to produce for this.
Regards,
James Mc
========
CLA and cRIO Fanatic
wiresmithtech.com/blog

Access to gmail without connection is not supported by the new firefox (4.0), but it was possible with the previous version (3.6).

I usually used this service before and with the same laptop (windows XP) I can not access no. Gmail says that it is not compatible with my web browser

You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
You should still have your profile folder, so when you install 3. you will get your bookmarks and other user data back.
There is a third party version of Firefox that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

I want to create a network so that I can share a printer, but I don't want to connect it to the internet. It is just for the laptops to connect to the printer. Is that possible with the airport express?

I think I should be able to, but both at the apple store and when I called apple, the sales people told me it can't be done.
I've read the manuals for both the express and the extreme, and I can't see why this is not possible.
Can anyone enlighten me on this?

Yes, this is possible ... but understand that you would need two switch wireless networks between network/Internet access and for printing.
The AirPort would not get a Public IP address, but it would have a Private IP address of 10.0.1.1 ... and it would be providing wireless clients connected to it with Private IP addresses in the 10.0.1.2 - 10.0.1.200 range.
AirPort Utility > Select the AirPort > Manual Setup > AirPort > Wireless
Wireless Mode: Create a wireless network
Wireless Network Name: <enter a desired Network Name or SSID>
Radio Mode: <leave the default or select a desired radio mode>
Channel: Automatic
Wireless Security: <select the desired wireless security type>
Internet > Internet Connection
Connect Using: Ethernet
Connection Sharing: Distribute a range of IP addresses
Internet > TCP/IP
Configure IPv4: Manually
IP Address: 10.0.1.1
Subnet Mask: 255.255.255.0
Router Address: 10.0.1.1
DNS Server(s): <leave blank>
Domain Name: <leave blank>
Internet > DHCP
DHCP Beginning Address: <leave default or change to a desired starting address>
DHCP Ending Address: <leave default or change to a desired ending address>
Advanced > Logging & Statistics
Allow SNMP (unchecked)
The AirPort will still report at least three errors: 1) Configuration of WAN, 2) SNMP over WAN, and 3) Double NAT. These can all be safely ignored to stop the AirPort's status light from flashing amber in this configuration.

Is it possible with the SDK?

Is it possible to use the Illustrator's tools while making an extension/plug-in? What I mean is: Can I "take" the Illustrator Scissors to cut a path at some point/anchor? Can I "ask" Simplify tool to simplify some path with some parameters? Can I use Pathfinder to crop some object? etc.
I look at the SDK/Scripting manual and I see no way to use the tools. I see objects and their properties. It is possible to do only basic operations like "move, reflect, change color". How about using the tools?!
In my imagination the scripting/plug-in development should be similar to Actions creation, but more advanced. Like:
1. Create a rectangle.
2. Apply "round corners" effect.
3. Crop with another rectangle.
4. Duplicate.
5. Move.
6. Unite.
7. Apply ZigZag effect.
8. Simplify, 80%, ...
And I am surprised to see that SDK does not have/show the way to use the standard/built-in tools.
Please point me in the right direction. How to use the tools? Any sample source code?

The ActionManagerSuite contains lots of useful stuff you may be able to use. Look through the header files in Adobe Illustrator CS6 SDK / illustratorapi / illustrator / actions /
Particularly "AIObjectAction.h"
A properly set up AIActionParamValueRef will allow you to use a lot of Illustrator core functionality that may not be available through the other Suites. The name of the action you want can be found in the action palette by creating an action and adding the function you want to use.
It's been a while since I used this, but I think I got the enumerated value by watching the returned integer "value" in:
ASErr ASAPI(* AIActionManagerSuite::AIActionGetEnumerated)(AIActionParamValueRef param, ActionParamKeyID key, char *name, ai::int32 *value) while stepping through in the debugger.
This did a merge of selected art, I think. It may help get you started.
AIActionParamValueRef
crop_VPB = NULL;
char
crop_name[] = "Crop";
AIErr
result = kNoErr;
result = sAIActionManager->AINewActionParamValue(&crop_VPB);
result = sAIActionManager->AIActionSetEnumerated (crop_VPB, 'name', crop_name, 9);
result = sAIActionManager->AIActionSetBoolean(crop_VPB, 'objt', true);
result = sAIActionManager->AIActionSetBoolean(crop_VPB, 'fill', true);
result = sAIActionManager->AIActionSetBoolean(crop_VPB, 'strk', true);
result = sAIActionManager->AIActionSetBoolean(crop_VPB, 'smth', true);
result = sAIActionManager->AIActionSetInteger(crop_VPB, 'step', 256);
result = sAIActionManager->AIActionSetUnitReal(crop_VPB, 'thck', unitPoints, (AIReal).0072);
result = sAIActionManager->AIActionSetUnitReal(crop_VPB, 'prec', unitPoints, (AIReal).0072);
result = sAIActionManager->AIActionSetBoolean(crop_VPB, 'remv', true);
result = sAIActionManager->AIActionSetBoolean(crop_VPB, 'extr', true);
result = sAIActionManager->PlayActionEvent( "ai_plugin_pathfinder", kDialogNone, crop_VPB);
if(crop_VPB != NULL) result = sAIActionManager->AIDeleteActionParamValue(crop_VPB);

I'm not a programmer but want to know if this is possible with the SDK?

Hello, I'm a photographer, not a programmer but I'm looking for a solution to automate what I do twice a week with Adobe Lightroom...I need a plugin that will do the following:
1) Take a set of photos and Randomize the Order (i.e. mix them up not A-Z or Z-A or by rating, etc)
2) Apply certain develop presets that I choose randomly to some of those photos
3) Export& Upload the photos to a facebook group or fan-page
I already have a plugin which does task #3 so really having something do 1&2 is all I need but if it's possible to do it all with one plugin then that would obviously be better...
Can this be done?
Thanks.

Hi,
Off the top of my head I can't think of an SDK provided mechanism to modify
the user sort order (item 1 in your list). I'm pretty sure the rest is
achievable.
Thanks, Matt
(Apologies for the brevity - sent from my Android)

Many of us know Outlook mails can be stored using a PST Mail app to review the old mails when needed on an iPad. I am considering a switch to Mac OS. But I am wondering if the same is possible with the mbox files.

Many of us know Outlook mails (pst files) can be stored using a PST Mail app to review the old mails when needed on an iPad. I am considering a switch to Mac OS. But I am wondering if the same is possible. What would be the file format of the emails on a Mac OS and the app equivalent of the PST Mail app? Thanks for helping me out. Durai

clw51 wrote:
Thanks for your response and yes I understand what you are saying. Maybe you could explain why "email users" hate HTML email with a passion.
These tend to be technical users who have a more purist attitude about email. They prefer that email be text-only, and consider HTML formatting to be superfluous for most messages. And I do think they have a point. If you have 100 plain-text emails and 100 HTML emails, you will notice that the HTML emails take up noticeably more disk space. And if the HTML email senders have loaded down their default emails with background images, signatures with corporate logos and winmail.dat attachments and all manner of embedded ornamentation, and (I never even thought people went this far) animations, then a simple email reply like "Thanks! I'll see you this evening," ends up carrying an tremendous additional amount of file size and network bandwidth overhead just to carry those six words. It not only means more disk space consumed, but it ripples all through the system: More space is required for backing up and archiving your emails, plus more mail server space and network bandwidth are consumed per message. Purists see this as an incredible waste of resources.
The message body of at text email can simply be "Thanks! I'll see you this evening."
The HTML version, at a bare minimum, must be
{html}
{p}"Thanks! I'll see you this evening."{/p}
{/html}
(replaced angle brackets with curly brackets so Apple Forums won't try and format it)
Already that's almost double the amount of characters required to send the message, just to format it in HTML. And that's if no fonts, styles, graphics, or media have been applied. If they are, the number of actual characters sent balloons dramatically.
I'm in the middle. I don't hate HTML email, I'll even turn it on when I think formatting will help my message. But I like to use disk space efficiently, so I've set plain text as my default for sending messages.

I have the Ai trial and i cannot seem to figure out how to do a gradient with colour... is it just not possible with the trial version or what?

Topic.

Hi there!
If you want to do a gradient with colors other than the standard BW, you just have to go into the gradient window and double click on one of the markers on the color slider. A color menu should pop up; click on the tiny button in the top right of that menu and change your color mode to RGB. Then you can select your color from there.
Hope this helps!

How this error is possible with the most simple EJB model example?

javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://127.0.0.1:7101: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection refused; No available router to destination]
     at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
     at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:783)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:367)
     at weblogic.jndi.Environment.getContext(Environment.java:315)
     at weblogic.jndi.Environment.getContext(Environment.java:285)
     at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at test.client.SessionEJBRemoteClient.getInitialContext(SessionEJBRemoteClient.java:259)
     at test.client.SessionEJBRemoteClient.main(SessionEJBRemoteClient.java:34)
Caused by: java.net.ConnectException: t3://127.0.0.1:7101: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection refused; No available router to destination
     at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:216)
     at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
     at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:352)
     ... 9 more
Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection refused; No available router to destination
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:464)
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:315)
     at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:251)
     at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:194)
     at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238)
     at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:200)
     ... 12 more
Process exited with exit code 0.
can someone orient me on solving this error? i am making this example from oracle:
http://www.oracle.com/technology/obe/obe11jdev/ps1/ejb/ejb.html
thank you
Vael

yes it is!!! sorry i need to sleep.
do you know why now i am trying to exec the client and get this error?
javax.ejb.EJBException: EJB Exception: ; nested exception is:
     java.lang.NoClassDefFoundError: com/mysql/jdbc/Connection; nested exception is: java.rmi.RemoteException: EJB Exception: ; nested exception is:
     java.lang.NoClassDefFoundError: com/mysql/jdbc/Connection
java.rmi.RemoteException: EJB Exception: ; nested exception is:
     java.lang.NoClassDefFoundError: com/mysql/jdbc/Connection
     at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
     at test.model.SessionEJB_qxt9um_SessionEJBRemoteImpl_1032_WLStub.getDescripcionextraFindAll(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:73)
     at $Proxy0.getDescripcionextraFindAll(Unknown Source)
     at test.client.SessionEJBRemoteClient.main(SessionEJBRemoteClient.java:36)
Caused by: java.lang.NoClassDefFoundError: com/mysql/jdbc/Connection
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClassCond(ClassLoader.java:632)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
the Model Project has got the MySQL jar library
Thank you!

Is RAID0 possible with the UltraBay ?

Similar Messages

Maybe you are looking for