Is regeneration of maintaince view differs in 4.0 and 4.6

A new customer defined field(y_status) was added to the table(ykxrdarea). I regenerated the changes in the maintenance view by entered the table name in the transaction SE11 and choose utilities - table maintenance generator. In the table maintenance dialog, selected generated objects from the menu and clicked on change. In the change generation elements screen selected the reason for regeneration. In my case it is new field/sec.table in structure. Hit enter. The screen was regenerated in 4.6
But when I tried the same in 4.0 versions it dint reflect the changes.
Is the regeneration procedure differs in 4.0. if yes? Please let me know

Hi,
Apparently, it seems the procedure is different.
Usually what I do is deleting the maintenance view an regenerate a new one.
I know it doesn't answer your question but that's my opinion

Similar Messages

  • Creation of Maintaince View

    Hi,
    I would like to create a Maintaince View. In SE11 I selected View option after that I selected Maintaince View option. Then I have given the Name of the table . But it is taking only one table name. remaing fields are in the disable mode.
    How to create a Maintaince View for a table?
    Is there any differece between table maintaince generator and Maintaince view for a table or both or same for a single table ?
    What is the use real use of mainataince view ?
    Regards,
    Satya

    create a maintanance view using two tables using default navigations and activate (ignore wornings)
    click on "utilities"menu.
    table maintanance generator
    opens an interface,set the authourization group as "ates"
    specify name of function group(name of the function group)where code should be generated
    select the maintanance type as "one step"
    specify the screen number(s11) in overview screen field
    click on "create" from application toolbar
    save the objects under a package with request number
    add prompts a message as "request completed without errors".
    this view cant be accessed directly by abap reports,as these are designed for mpp.
    test the maintanance view code created properly or not using "se54" tcode.
    regards,
    usha.

  • Is there a way to view different portions of a document at the same time?

    Is there a way to view different portions of a document at the same time?

    No. I suggest you leave feedback for the Pages team regarding this. You can find it under the Pages menu > Provide Pages Feedback. That takes you to the same page as this link.

  • How to include maintaince view in da report

    I did a report for Audit – Inventory Ageing Company-wise Summary i am getting the output of the report well. what I need is that i should include a field WGBEZ of the maintaince view V023 so that to display material group description. where & how should i write the code in my code. kindly give suggestions. i here with attaching my code.
    Title       : Aged Stock
    Description : 'Audit – Inventory Ageing Company-wise Summary’
    REPORT ZMMR0024MOD LINE-SIZE 170 NO STANDARD PAGE HEADING .
    TYPE-POOLS : SLIS.
    TABLES : T001,
             T023,
             T001K,
             MARA,
             marv,
             MAKT,
             MBEW,
             MSEG,
             ekpo.
    Constants
    CONSTANTS : GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE
    'TOP_OF_PAGE'.
    Internal Tables
    DATA  :  BEGIN OF GT_FINAL OCCURS 0,
             MATKL LIKE MARA-MATKL,
             MATNR LIKE MARA-MATNR,
            WGBEZ LIKE V023-WGBEZ,
             LBKUM LIKE MBEW-LBKUM,
             tot_val type p decimals 2,
             MAKTX LIKE MAKT-MAKTX,
             tot_amt type p decimals 2,
             price type p decimals 2,
             meins like mara-meins,
             END OF GT_FINAL,
             DETAIL_FINAL LIKE GT_FINAL OCCURS 0 WITH HEADER LINE.
    DATA  :  BEGIN OF MAT_FINAL OCCURS 0,
             MATKL LIKE MARA-MATKL,
             TOT_VAL LIKE MSEG-MENGE,
             TOT_AMT LIKE MBEW-SALK3,
             PRICE LIKE MBEW-SALK3,
             meins like mara-meins,
             END OF MAT_FINAL.
    DATA :   BEGIN OF I_MARA OCCURS 0,
             MATNR LIKE MARA-MATNR,
             MATKL LIKE MARA-MATKL,
             MAKTX LIKE MAKT-MAKTX,
             WGBEZ LIKE V023-WGBEZ,
             MEINS LIKE MARA-MEINS,
             LBKUM LIKE MBEWH-LBKUM,
             TOT_AMT LIKE MBEW-SALK3,
             END OF I_MARA.
    DATA :   BEGIN OF I_MKPF_MSEG OCCURS 0,
             MATNR LIKE MARA-MATNR,
             MBLNR LIKE MSEG-MBLNR,
             ZEILE LIKE MSEG-ZEILE,
             MENGE LIKE MSEG-MENGE,
             BWART LIKE MSEG-BWART,
             BUDAT LIKE MKPF-BUDAT,
             NET_VAL LIKE MSEG-MENGE,
             ebeln like mseg-ebeln,
             ebelp like mseg-ebelp,
             lfbnr like mseg-lfbnr,
             lfpos like mseg-lfpos,
             SHKZG LIKE MSEG-SHKZG,
             meins like mara-meins,
             END OF I_MKPF_MSEG,
             WA_TEMP LIKE I_MKPF_MSEG.
    DATA :   BEGIN OF I_MBEWH OCCURS 0,
             MATNR LIKE MARA-MATNR,
             LBKUM LIKE MBEW-LBKUM,
             SALK3 LIKE MBEW-SALK3,
             BWKEY LIKE MBEW-BWKEY,
             END OF I_MBEWH.
    DATA :   I_MBEWH1 LIKE I_MBEWH OCCURS 0 WITH HEADER LINE.
    DATA :   BEGIN OF I_TEMP OCCURS 0,
             MATNR LIKE MARA-MATNR,
             NET_VAL LIKE MSEG-MENGE,
             meins like mara-meins,
             END OF I_TEMP.
    RANGES : RANGE_WERK FOR T001W-WERKS,
             RANGE_DATE FOR SY-DATUM,
             S_BWTAR FOR BWTAR.
    DATA :  PERIOD LIKE  BAPI0002_4-FISCAL_PERIOD,
            FISCAL_YEAR LIKE  BAPI0002_4-FISCAL_YEAR,
            CUR_VAL LIKE MSEG-MENGE,
            NET_VAL LIKE MSEG-MENGE,
            TOT_VAL LIKE MSEG-MENGE,
            TOT_QTY LIKE MSEG-MENGE,
            TOT_AMT1 LIKE MBEW-SALK3,
            RES_DATE LIKE SY-DATUM,
            NUM LIKE MBEW-SALK3,
            UOM LIKE MARA-MEINS.
    Data declarations for alv
    DATA : GV_PAGE TYPE N VALUE 0.
    DATA : GT_FIELDCAT         TYPE SLIS_T_FIELDCAT_ALV,
           GT_SORT             TYPE SLIS_T_SORTINFO_ALV,
           GT_FILTER           TYPE SLIS_T_FILTER_ALV,
           GT_SP_GROUP         TYPE SLIS_T_SP_GROUP_ALV,
           GT_EVENTS           TYPE SLIS_T_EVENT WITH HEADER LINE,
           GV_REPID            LIKE SY-REPID,
           GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
           GV_SAVE(1)          TYPE C,
           GT_VARIANT          LIKE DISVARIANT,
           GV_DOMNAME          LIKE DD07V-DOMNAME,
           GV_DOMVAL           LIKE DD07V-DOMVALUE_L,
           GW_FIELDCAT         TYPE SLIS_FIELDCAT_ALV.
    Selection screen
    SELECTION-SCREEN BEGIN OF BLOCK SEL WITH FRAME TITLE TEXT-001.
    PARAMETERS     : GS_BUKRS LIKE T001K-BUKRS OBLIGATORY.
    SELECT-OPTIONS : GS_MATKL FOR MARA-MATKL,
                     GS_MATNR FOR MARA-MATNR.
    PARAMETERS     : gs_ped like s031-spmon OBLIGATORY,
                     GS_DAYS(3) TYPE n,
                     MG1 RADIOBUTTON GROUP GR1,
                     MT2 RADIOBUTTON GROUP GR1.
    SELECTION-SCREEN END OF BLOCK SEL.
    Validations on selection screen
    AT SELECTION-SCREEN ON GS_BUKRS.
      PERFORM F00_VALIDATE_COMPANY_CODE.
    AT SELECTION-SCREEN ON GS_MATKL.
      IF NOT GS_MATKL[] IS INITIAL.
        PERFORM F01_VALIDATE_MATERIAL_GROUP.
      ENDIF.
    AT SELECTION-SCREEN ON GS_MATNR.
      IF NOT GS_MATNR[] IS INITIAL.
        PERFORM F01_VALIDATE_MATERIAL.
      ENDIF.
    AT SELECTION-SCREEN ON GS_days.
      if gs_days = ''.
        gs_days = 0.
      endif.
    START-OF-SELECTION.
      GV_REPID = SY-REPID.
      PERFORM F20_EVENTTAB_BUILD CHANGING GT_EVENTS[].
      PERFORM F30_SELECT_PRIMARY_DATA.
      IF MG1 = 'X'.
        PERFORM F11_DATA_FORMAT_GROUP.
        PERFORM F50_MATERIAL_GROUP_DATA.
        PERFORM F40_DISPLAY_REPORT TABLES MAT_FINAL.
      ELSEIF MT2 = 'X'.
        PERFORM F10_DATA_FORMAT_MAT.
        PERFORM F40_DISPLAY_REPORT TABLES GT_FINAL.
      ENDIF.
    *&      Form  F20_EVENTTAB_BUILD
    FORM F20_EVENTTAB_BUILD CHANGING LT_EVENTS TYPE SLIS_T_EVENT.
      CONSTANTS:  LC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE
                  'TOP_OF_PAGE',
                  LC_FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE
                  'USER_COMMAND'.
      DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          I_LIST_TYPE = 0
        IMPORTING
          ET_EVENTS   = LT_EVENTS.
    note : lt_events has all the events
      READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
      INTO LS_EVENT.
      IF SY-SUBRC = 0.
        MOVE GC_FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
        APPEND LS_EVENT TO LT_EVENTS.
      ENDIF.
      READ TABLE LT_EVENTS WITH KEY NAME =   SLIS_EV_USER_COMMAND
      INTO LS_EVENT.
      IF SY-SUBRC = 0.
        MOVE LC_FORMNAME_USER_COMMAND TO LS_EVENT-FORM.
        APPEND LS_EVENT TO LT_EVENTS.
      ENDIF.
    ENDFORM.                    "F20_EVENTTAB_BUILD
    *&      Form  F12_E04_COMMENT_BUILD
    FORM F12_E04_COMMENT_BUILD USING E04_LT_TOP_OF_PAGE TYPE
    SLIS_T_LISTHEADER.
      DATA : LS_LINE TYPE SLIS_LISTHEADER,
             LV_TEXT(100) TYPE C,
             LV_DAYLOW(2) TYPE C,
             LV_MONTHLOW(2) TYPE C,
             LV_YEARHIGH(4) TYPE C,
             LV_DAYHIGH(2) TYPE C,
             LV_MONTHHIGH(2) TYPE C,
             LV_YEARLOW(4) TYPE C,
             LV_DATFORMAT1(10),
             LV_DATFORMAT2(10).
      CONCATENATE  'Company Code :' ' '  GS_BUKRS
      INTO LV_TEXT SEPARATED BY SPACE.
      CLEAR LS_LINE.
      LS_LINE-TYP  = 'H'.
      LS_LINE-INFO = LV_TEXT.
      APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
      CLEAR LV_TEXT.
      IF NOT GS_MATKL[] IS INITIAL.
        IF GS_MATKL-HIGH IS INITIAL AND NOT GS_MATKL-LOW IS INITIAL.
          CONCATENATE  'Material Group :' ' '  GS_MATKL-LOW
          INTO LV_TEXT SEPARATED BY SPACE.
        ELSE .
          CONCATENATE  'Material Group :' GS_MATKL-LOW ' to'
          GS_MATKL-HIGH INTO LV_TEXT SEPARATED BY SPACE.
        ENDIF.
      ENDIF.
      CLEAR LS_LINE.
      LS_LINE-TYP  = 'H'.
      LS_LINE-INFO = LV_TEXT.
      APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
      CLEAR LV_TEXT.
      IF NOT GS_MATNR[] IS INITIAL.
        IF GS_MATNR-HIGH IS INITIAL AND NOT GS_MATNR-LOW IS INITIAL.
          CONCATENATE  'Material :' ' '  GS_MATNR-LOW
          INTO LV_TEXT SEPARATED BY SPACE.
        ELSE .
          CONCATENATE  'Material :' GS_MATNR-LOW ' to'
          GS_MATNR-HIGH INTO LV_TEXT SEPARATED BY SPACE.
        ENDIF.
      ENDIF.
      CLEAR LS_LINE.
      LS_LINE-TYP  = 'H'.
      LS_LINE-INFO = LV_TEXT.
      APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
      CLEAR LV_TEXT.
    LV_YEARLOW  = gs_ped+0(4).
    LV_MONTHLOW = gs_ped+4(2).
    LV_DAYLOW   = gs_ped+6(2).
    CONCATENATE LV_DAYLOW LV_MONTHLOW LV_YEARLOW INTO LV_DATFORMAT1
    *SEPARATED BY '.'.
      CONCATENATE  'Key month : ' gs_ped
      INTO LV_TEXT SEPARATED BY SPACE.
      CLEAR LS_LINE.
      LS_LINE-TYP  = 'H'.
      LS_LINE-INFO = LV_TEXT.
      APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
      CLEAR LV_TEXT.
      CONCATENATE  'Number of days :' ' '  GS_DAYS
      INTO LV_TEXT SEPARATED BY SPACE.
      CLEAR LS_LINE.
      LS_LINE-TYP  = 'H'.
      LS_LINE-INFO = LV_TEXT.
      APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
      CLEAR LV_TEXT.
      GV_PAGE = GV_PAGE + 1.
      CONCATENATE  'PAGE NO : ' ' '  GV_PAGE
      INTO LV_TEXT SEPARATED BY SPACE.
      CLEAR LS_LINE.
      LS_LINE-TYP  = 'H'.
      LS_LINE-INFO = LV_TEXT.
      APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
    ENDFORM.                    "F12_E04_COMMENT_BUILD
          FORM TOP_OF_PAGE                                              *
    FORM TOP_OF_PAGE.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
    ENDFORM.                    "TOP_OF_PAGE
    *&      Form  validate_sales_organization
          text
    FORM F00_VALIDATE_COMPANY_CODE .
      SELECT SINGLE BUKRS
          FROM T001
          INTO T001-BUKRS
          WHERE BUKRS = GS_BUKRS.
      IF SY-SUBRC = 0.
      ELSE.
        MESSAGE E000(ZCBOM) WITH 'Please enter the valid material group'.
      ENDIF.
    ENDFORM.                    " validate_sales_organization
    *&      Form  VALIDATE_PLANT
          text
    -->  p1        text
    <--  p2        text
    FORM F01_VALIDATE_MATERIAL_GROUP.
      SELECT SINGLE MATKL
          FROM T023
          INTO T023-MATKL
          WHERE MATKL IN GS_MATKL.
      IF SY-SUBRC = 0.
      ELSE.
        MESSAGE E000(ZCBOM) WITH 'Please enter the valid material group'.
      ENDIF.
    ENDFORM.                    " VALIDATE_PLANT
    *&      Form  VALIDATE_MATERIAL
          text
    -->  p1        text
    <--  p2        text
    FORM F01_VALIDATE_MATERIAL.
      SELECT SINGLE MATNR
          FROM MARA
          INTO MARA-MATNR
          WHERE MATNR IN GS_MATNR.
      IF SY-SUBRC = 0.
      ELSE.
        MESSAGE E000(ZCBOM) WITH 'Please enter the valid material '.
      ENDIF.
    ENDFORM.                    " VALIDATE_MATERIAL
    *&      Form  F40_DISPLAY_REPORT
    FORM F40_DISPLAY_REPORT TABLES IT.
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
        EXPORTING
          I_CALLBACK_PROGRAM      = GV_REPID
          I_CALLBACK_USER_COMMAND = 'USER_COMMAND '
          IT_FIELDCAT             = GT_FIELDCAT[]
          IT_SPECIAL_GROUPS       = GT_SP_GROUP[]
          IT_SORT                 = GT_SORT[]
          I_SAVE                  = GV_SAVE
          IS_VARIANT              = GT_VARIANT
          IT_EVENTS               = GT_EVENTS[]
        TABLES
          T_OUTTAB                = IT.                         "it_1.
      CLEAR:GT_FIELDCAT.
      REFRESH:GT_FIELDCAT.
    ENDFORM.                    " F40_DISPLAY_REPORT
    *&      Form  F30_SELECT_PRIMARY_DATA
          text
    FORM F30_SELECT_PRIMARY_DATA .
    subroutine to get the actual data
    to get the plants for the given company code
      data : temp_bukrs like BAPI0002_2-COMP_CODE,
             temp_date  like BAPI0002_4-POSTING_DATE.
      data : last_day(2) type n,
             from_date like sy-datum,
             temp_date1 like sy-datum,
             cal_month(2) type n,
             cal_year(4) type n.
      SELECT DISTINCT BWKEY FROM T001K INTO RANGE_WERK-LOW WHERE BUKRS = GS_BUKRS.
        RANGE_WERK-SIGN = 'I'.
        RANGE_WERK-OPTION = 'EQ'.
        APPEND RANGE_WERK.
      ENDSELECT.
    *selecting material that is relevant to the selection criteria
      SELECT MARA~MATNR MATKL MEINS MAKTX
             FROM MARA JOIN MAKT
               ON MAKTMATNR = MARAMATNR
             INTO CORRESPONDING FIELDS OF TABLE I_MARA
             WHERE MARA~MATNR IN GS_MATNR
              AND  MATKL IN GS_MATKL
              AND MAKT~SPRAS = 'EN'.
      temp_bukrs = gs_bukrs.
      cal_month = gs_ped+4(2).
      cal_year  = gs_ped+0(4).
      concatenate cal_year cal_month '01' into temp_date.
    *temp_date = temp_date1.
      CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
        EXPORTING
          COMPANYCODEID = temp_bukrs
          POSTING_DATE  = temp_date
        IMPORTING
          FISCAL_YEAR   = fiscal_year
          FISCAL_PERIOD = period.
      select single * from marv into marv where bukrs = temp_bukrs.
    temp_date1 = temp_date.
      if sy-subrc = 0.
        if ( marv-lfmon ne period or marv-lfgja ne fiscal_year ).
          CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
            EXPORTING
              DAY_IN            = temp_date
            IMPORTING
              LAST_DAY_OF_MONTH = from_date
            EXCEPTIONS
              DAY_IN_NO_DATE    = 1
              OTHERS            = 2.
        else.
          from_date = sy-datum.
        endif.
      endif.
    to define the range for posting date
      RES_DATE = from_date - GS_DAYS.
      RANGE_DATE-LOW  = RES_DATE.
      RANGE_DATE-HIGH = from_date.
      RANGE_DATE-OPTION = 'BT'.
      RANGE_DATE-SIGN = 'I'.
      APPEND RANGE_DATE.
    to select documents and their quantities for the given range of posting dates
    with goods movement type 101 105 657 453 459 501 521 and their reversals
      if range_date-low ne range_date-high.
        SELECT MSEG~MATNR MSEG~MBLNR MSEG~ZEILE MSEG~MENGE MSEG~BWART mseg~ebeln mseg~ebelp
               MKPF~BUDAT MSEG~SHKZG
               FROM MKPF
               JOIN MSEG ON MSEG~MBLNR = MKPF~MBLNR
                        AND MSEG~MJAHR = MKPF~MJAHR
                          INTO CORRESPONDING FIELDS OF TABLE I_MKPF_MSEG
                              FOR ALL ENTRIES IN I_MARA
                            WHERE MSEG~MATNR = I_MARA-MATNR
                              AND MSEG~WERKS IN RANGE_WERK
                              AND MKPF~BUDAT IN RANGE_DATE
                              AND MSEG~BWART IN ('101','105','657','453','459','501','521','561','309','701','712', "711
                                                 '102','106','658','454','460','502','522','562').
        DELETE  I_MKPF_MSEG WHERE ( BWART = '309' AND SHKZG = 'H')
                               or ( bwart = '453' and shkzg = 'H')
                               or ( bwart = '454' and shkzg = 'S').
      endif.
      SORT I_MKPF_MSEG BY MATNR MBLNR.
      LOOP AT I_MKPF_MSEG.
        if i_mkpf_mseg-bwart = '101' or i_mkpf_mseg-bwart = '102'.
          select single * from ekpo  where ebeln = i_mkpf_mseg-ebeln
                                       and ebelp = i_mkpf_mseg-ebelp.
          if ekpo-pstyp = 7.
            delete i_mkpf_mseg where ebeln = i_mkpf_mseg-ebeln
                                 and ebelp = i_mkpf_mseg-ebelp.
            CLEAR I_MKPF_MSEG-MENGE.
          endif.
        endif.
        IF ( I_MKPF_MSEG-BWART = '101' OR I_MKPF_MSEG-BWART = '105' OR I_MKPF_MSEG-BWART = '712' OR
             I_MKPF_MSEG-BWART = '657' OR I_MKPF_MSEG-BWART = '453' OR "I_MKPF_MSEG-BWART = '711' OR
             I_MKPF_MSEG-BWART = '459' OR I_MKPF_MSEG-BWART = '501' OR I_MKPF_MSEG-BWART = '701' OR
             I_MKPF_MSEG-BWART = '521' OR I_MKPF_MSEG-BWART = '561' OR I_MKPF_MSEG-BWART = '309').
          NET_VAL = NET_VAL + I_MKPF_MSEG-MENGE.
        ENDIF.
        IF ( I_MKPF_MSEG-BWART = '102' OR I_MKPF_MSEG-BWART = '106' OR
             I_MKPF_MSEG-BWART = '658' OR I_MKPF_MSEG-BWART = '454' OR
             I_MKPF_MSEG-BWART = '460' OR I_MKPF_MSEG-BWART = '502' OR
             I_MKPF_MSEG-BWART = '522' OR I_MKPF_MSEG-BWART = '562').
          NET_VAL = NET_VAL - I_MKPF_MSEG-MENGE.
        ENDIF.
        WA_TEMP = I_MKPF_MSEG.
        AT END OF MATNR.
          I_TEMP-MATNR  = WA_TEMP-MATNR.
          I_TEMP-NET_VAL = NET_VAL.
          APPEND I_TEMP.
          CLEAR NET_VAL.
        ENDAT.
      ENDLOOP.
      SORT I_MARA BY MATNR.
      SORT I_TEMP BY MATNR.
      SELECT MATNR LBKUM SALK3 BWKEY
             FROM MBEWH
             INTO CORRESPONDING FIELDS OF TABLE I_MBEWH
             FOR ALL ENTRIES IN I_MARA
             WHERE MATNR = I_MARA-MATNR
               AND BWKEY IN RANGE_WERK
               AND BWTAR IN S_BWTAR
               AND LFGJA = FISCAL_YEAR
               AND LFMON = PERIOD.
      SELECT MATNR LBKUM SALK3 BWKEY
             FROM MBEW
             INTO CORRESPONDING FIELDS OF TABLE I_MBEWH1
             FOR ALL ENTRIES IN I_MARA
             WHERE MATNR = I_MARA-MATNR
               AND BWKEY IN RANGE_WERK.
                AND LFMON = PERIOD
                AND LFGJA = FISCAL_YEAR.
      SORT I_MBEWH BY MATNR BWKEY.
      SORT I_MBEWH1 BY MATNR BWKEY.
      LOOP AT I_MBEWH.
        LOOP AT I_MBEWH1 WHERE MATNR = I_MBEWH-MATNR
                           AND BWKEY = I_MBEWH-BWKEY.
          DELETE I_MBEWH1.
        ENDLOOP.
      ENDLOOP.
      APPEND LINES OF I_MBEWH1 TO I_MBEWH.
      CLEAR : I_MBEWH1.
      REFRESH I_MBEWH1.
      SORT I_MBEWH BY MATNR.
      LOOP AT I_MBEWH .
        I_MBEWH1 = I_MBEWH.
        AT END OF MATNR.
          SUM.
          I_MBEWH1-LBKUM = I_MBEWH-LBKUM.
          I_MBEWH1-SALK3 = I_MBEWH-SALK3.
          APPEND I_MBEWH1.
        ENDAT.
      ENDLOOP.
      DELETE I_MBEWH1 WHERE LBKUM <= 0.
      LOOP AT I_MARA.
        CLEAR : CUR_VAL,
                NUM,
                TOT_VAL,
                TOT_AMT1,
                I_MBEWH1.
        GT_FINAL-MATNR = I_MARA-MATNR.
        GT_FINAL-MATKL = I_MARA-MATKL.
        GT_FINAL-MAKTX = I_MARA-MAKTX.
        gt_final-meins = I_MARA-MEINS.
        READ TABLE I_MBEWH1 WITH KEY MATNR = I_MARA-MATNR.
        GT_FINAL-LBKUM = I_MBEWH1-LBKUM.
    to get the net inward movement vale that is to be subtracted from current value
        READ TABLE I_TEMP WITH KEY MATNR = I_MARA-MATNR.
        IF SY-SUBRC = 0 .
          IF GT_FINAL-LBKUM > 0.
            TOT_VAL = gt_final-lbkum - I_TEMP-NET_VAL.
            if tot_val gt 0.
              GT_FINAL-TOT_VAL = TOT_VAL.
              GT_FINAL-PRICE = I_MBEWH1-SALK3 / gt_final-lbkum."TOT_VAL.
              GT_FINAL-TOT_AMT = GT_FINAL-PRICE * GT_FINAL-TOT_VAL.
              APPEND GT_FINAL.
            endif.
          ENDIF.
        else.
          if gt_final-lbkum > 0.
            gt_final-tot_val = gt_final-lbkum.
            GT_FINAL-PRICE = I_MBEWH1-SALK3 / gt_final-lbkum.
            GT_FINAL-TOT_AMT = GT_FINAL-PRICE * GT_FINAL-TOT_VAL.
            APPEND GT_FINAL.
          endif.
        ENDIF.
      ENDLOOP.
      DELETE GT_FINAL WHERE LBKUM LE 0.
    ENDFORM.                    " F30_SELECT_PRIMARY_DATA
    *&      Form  f10_DATA_FORMAT
          text
    FORM F10_DATA_FORMAT_MAT .
    populating the field catalog table
    MATNR
      PERFORM F11_E01_FIELDCAT_INIT USING  'MARA' 'MATNR' 'MATNR' '1'
                               TEXT-003 'GT_FINAL' '15'.
    MAKTX
      PERFORM F11_E01_FIELDCAT_INIT USING  'MARA' 'MATKL' 'MATKL' '2'
                               TEXT-004 'GT_FINAL' '24'.
    DESC
      PERFORM F11_E01_FIELDCAT_INIT USING  'MAKT' 'MAKTX' 'MAKTX' '3'
                               TEXT-005 'GT_FINAL' '35'.
    Material Group Decription
      PERFORM F11_E01_FIELDCAT_INIT USING  'V023' 'WGBEZ' 'WGBEZ' '3'
                               TEXT-005 'GT_FINAL' '20'.
    qty
      PERFORM F11_E01_FIELDCAT_INIT USING  '' 'TOT_VAL' 'MENGE' '4'
                               TEXT-006 'GT_FINAL' '15'.
    MEINS
      PERFORM F11_E01_FIELDCAT_INIT USING  '' 'MEINS' 'MEINS' '4'
                               TEXT-008 'GT_FINAL' '15'.
    TOTAL COST
      PERFORM F11_E01_FIELDCAT_INIT USING  '' 'TOT_AMT' 'SALK3' '5'
                               TEXT-007 'GT_FINAL' '24'.
      PERFORM F12_E04_COMMENT_BUILD USING GT_LIST_TOP_OF_PAGE[].
      GV_SAVE = 'A'.
      CLEAR GT_EVENTS.
      REFRESH GT_EVENTS.
      GT_EVENTS-NAME = 'TOP_OF_PAGE'.
      GT_EVENTS-FORM = 'TOP_OF_PAGE'.
      APPEND GT_EVENTS.
    ENDFORM.                    " f10_DATA_FORMAT
    *&      Form  F11_E01_FIELDCAT_INIT
          text
    FORM F11_E01_FIELDCAT_INIT  USING T1 T2 T3 T4 T5 T6 T7.
      CLEAR GW_FIELDCAT.
      GW_FIELDCAT-REF_TABNAME    = T1.
      GW_FIELDCAT-FIELDNAME      = T2.
      GW_FIELDCAT-REF_FIELDNAME  = T3.
      GW_FIELDCAT-COL_POS        = T4.
      GW_FIELDCAT-SELTEXT_L      = T5.
      GW_FIELDCAT-TABNAME        = T6.
      GW_FIELDCAT-OUTPUTLEN      = T7.
      APPEND GW_FIELDCAT TO GT_FIELDCAT.
    ENDFORM.                    " F11_E01_FIELDCAT_INIT
    *&      Form  f40_material_group_data
          text
    -->  p1        text
    <--  p2        text
    FORM F50_MATERIAL_GROUP_DATA .
      SORT GT_FINAL BY MATKL.
      LOOP AT GT_FINAL.
        TOT_QTY = GT_FINAL-TOT_VAL + TOT_QTY.
        TOT_AMT1 = GT_FINAL-TOT_AMT + TOT_AMT1.
        UOM = GT_FINAL-MEINS.
        AT END OF MATKL.
          MAT_FINAL-MATKL = GT_FINAL-MATKL.
          MAT_FINAL-TOT_VAL = TOT_QTY.
          MAT_FINAL-TOT_AMT = TOT_AMT1.
          MAT_FINAL-MEINS   = UOM.
          APPEND MAT_FINAL.
          CLEAR : TOT_QTY,
                  TOT_AMT1.
        ENDAT.
      ENDLOOP.
    ENDFORM.                    " f40_material_group_data
    *&      Form  BUILD_DETAIL
          text
    -->  p1        text
    <--  p2        text
    FORM BUILD_DETAIL .
      DETAIL_FINAL[] = GT_FINAL[].
      DELETE DETAIL_FINAL WHERE MATKL NE MAT_FINAL-MATKL.
    ENDFORM.                    " BUILD_DETAIL
    *&      Form  f11_data_format_group
          text
    -->  p1        text
    <--  p2        text
    FORM F11_DATA_FORMAT_GROUP .
    MATNR
    PERFORM F11_E01_FIELDCAT_INIT USING  'MARA' 'MATNR' 'MATNR' '1'
                              TEXT-003 'GT_FINAL' '15'.
      REFRESH GT_FIELDCAT[].
    MAKTX
      PERFORM F11_E01_FIELDCAT_INIT USING  'MARA' 'MATKL' 'MATKL' '2'
                               TEXT-004 'MAT_FINAL' '24'.
    DESC
    PERFORM F11_E01_FIELDCAT_INIT USING  'MAKT' 'MAKTX' 'MAKTX' '3'
                              TEXT-005 'GT_FINAL' '35'.
    Material Group Decription
    PERFORM F11_E01_FIELDCAT_INIT USING  'V023' 'WGBEZ' 'WGBEZ' '3'
                              TEXT-005 'GT_FINAL' '20'.
    qty
      PERFORM F11_E01_FIELDCAT_INIT USING  '' 'TOT_VAL' 'MENGE' '4'
                               TEXT-006 'MAT_FINAL' '15'.
    qty
      PERFORM F11_E01_FIELDCAT_INIT USING  '' 'MEINS' 'MEINS' '5'
                               TEXT-008 'MAT_FINAL' '15'.
    TOTAL COST
      PERFORM F11_E01_FIELDCAT_INIT USING  '' 'TOT_AMT' 'SALK3' '6'
                               TEXT-007 'MAT_FINAL' '24'.
      PERFORM F12_E04_COMMENT_BUILD USING GT_LIST_TOP_OF_PAGE[].
      GV_SAVE = 'A'.
      CLEAR GT_EVENTS.
      REFRESH GT_EVENTS.
      GT_EVENTS-NAME = 'TOP_OF_PAGE'.
      GT_EVENTS-FORM = 'TOP_OF_PAGE'.
      APPEND GT_EVENTS.
    ENDFORM.                    " f11_data_format_group
    *&      Form  DETAIL_FORMAT_FIELDCAT
          text
    -->  p1        text
    <--  p2        text
    FORM DETAIL_FORMAT_FIELDCAT .
      REFRESH GT_FIELDCAT[].
    MATNR
      PERFORM F11_E01_FIELDCAT_INIT USING  'MARA' 'MATNR' 'MATNR' '1'
                               TEXT-003 'DETAIL_FINAL' '15'.
    MAKTL
      PERFORM F11_E01_FIELDCAT_INIT USING  'MARA' 'MATKL' 'MATKL' '2'
                               TEXT-004 'DETAIL_FINAL' '24'.
    MAKTX
      PERFORM F11_E01_FIELDCAT_INIT USING  'MAKT' 'MAKTX' 'MAKTX' '3'
                               TEXT-005 'DETAIL_FINAL' '35'.
    qty
      PERFORM F11_E01_FIELDCAT_INIT USING  '' 'TOT_VAL' 'MENGE' '4'
                               TEXT-006 'DETAIL_FINAL' '15'.
    UOM
      PERFORM F11_E01_FIELDCAT_INIT USING  '' 'MEINS' 'MEINS' '5'
                               TEXT-008 'DETAIL_FINAL' '15'.
    TOTAL COST
      PERFORM F11_E01_FIELDCAT_INIT USING  '' 'TOT_AMT' 'SALK3' '6'
                               TEXT-007 'DETAIL_FINAL' '24'.
    PERFORM F12_E04_COMMENT_BUILD USING GT_LIST_TOP_OF_PAGE[].
      GV_SAVE = 'A'.
    CLEAR GT_EVENTS.
    REFRESH GT_EVENTS.
    GT_EVENTS-NAME = 'TOP_OF_PAGE'.
    GT_EVENTS-FORM = 'TOP_OF_PAGE'.
    APPEND GT_EVENTS.
    ENDFORM.                    " DETAIL_FORMAT_FIELDCAT
          FORM USER_COMMAND                                             *
    FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
                   RS_SELFIELD TYPE SLIS_SELFIELD.
      CASE R_UCOMM.
        WHEN '&IC1'.                       "doubleclick
          IF RS_SELFIELD-TABNAME = 'MAT_FINAL'.
            READ TABLE MAT_FINAL INDEX  RS_SELFIELD-TABINDEX .
            PERFORM BUILD_DETAIL.
            PERFORM DETAIL_FORMAT_FIELDCAT.
            PERFORM F20_EVENTTAB_BUILD CHANGING GT_EVENTS[].
            PERFORM F40_DISPLAY_REPORT TABLES DETAIL_FINAL.
            CLEAR DETAIL_FINAL[].
          ENDIF.
          CLEAR R_UCOMM.
      ENDCASE.
    ENDFORM.                    "USER_COMMAND

    Hi,
    Done with the help of abaper.
    Thanks & Regards,
    Sandeep

  • I want to set up two monitors but be able to view different programs on each one how do i do that

    i have two monitors hooked up to my desktop but want to view different programs on each one how do i do it

    Chipper, welcome to the forum.
    When requesting help, you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Maintaince view creation for a cluster table

    Hi friends,
    I have created a maintaince view for a cluster table bseg and i have activated it its working fine..
    now my problem is i can create maintaince view for mutiple tables if other tables are linked with primary table using foriegn key relationship..
    Now can any one tell me is it possible to create maintance view for cluster table with multiple tables as i need a linked table with bseg which iam not able to get... ie : when i click on the relationship tab iam not getting the linked tables for bseg...
    now can i create a maintaince view with 2 linked cluster tables..
    if so can any one tell me how to create it.
    As sap says we can create projection view for cluster and pooled table and we cannot create database view for cluster and pooled tables , but it does not mentioned like that for maintaince view....
    I assume we can do it.... as iam trying to create a maintaince view with single cluster table then it shoudl allow me to create for multiple linked cluster tables.... and is it mandatory to maintain TMG for this maintaince view....?
    Regards
    KUMAR

    yes.. ur right inserting values into a cluster table other than standard sap tarnactions is dangerious....
    But sap didnot mentioned any where that we cannot maintain data for cluster tables using maintaince view... which it said for database view..that pooled and cluster table cannot be used for database view..
    Regards
    Kumar

  • Photo rotaion in organize view different than edit view & slideshow

    Photo rotaion in organize view different than edit view & slideshow. The fact that the power supply to the computer was accidentally disconnected while I was working in iPhoto no doubt was the cause of this phenom.
    Any suggestions as to how to re-sync the rotations back up?

    Thanks for the tip. I wasn't aware of the use of theses two keys simultaneously. It occured to me after this post to just trash the whole library which I had just created for this particular group of photos and re-import the photos to a newly re-created library. I still had the camara connected so as it turned out it was fairly easy. Now that I think about it, if this hadn't been a newly created library just for this group of photos it wouldn't have worked so simply, so I guess I discovered another benifit for having multiple libraries.
    I'm glad you recomended the apple/alt key combo though as this knowledge no-doubt will come in handy at some time.
    iMac PowerPC G4 800 mhz 1GBSDRAM 17" Flatpanel   Mac OS X (10.4.8)   Seagate external Firewire/USB HD's:250GB & 500GBSony DSC-V3 & DSC-S8 Cybershot

  • Regenerating Proxies - list view hangs client

    Just wondering if anyone else has come up against this one?
    If in the Asset window in the list view, and I attempt to regenerate proxies on a clip, the client freezes. I have to force-quit the client.
    Upon restarting the client and inspecting the Search All Jobs I find that the regeneration of proxies did not occur (no surprise) and there is no record of it being actioned.
    If in the Asset window in thumbnail view, and I attempt to regenerate proxies on a clip - no issue.

    I, too, am suffering this same bug. I didn't realize it was only in list view until this thread. Thank you.
    -Cory

  • Maintaince view

    Dear All,
    I copied V_T001B maintaince view which is having data to ZV_T001B_000X. When I clicked contents to see whether the data is copied it is giving message as no database view exists for ZV_T001B_000X.
    Can any one help how to copy V_T001B to Z view along with data or how to post the data in the Z maintaince view once i copy it. Kindly give a solution to this...
    Regards,
    Raj Babu...

    Hi,
    You need to generate the table maintenance for the new view (utilities --> table maintenance generator from SE11).
    Regards,
    Darren

  • How to create Maintaince View and Help View

    Hi,
    Can u pls tell me the step by step procedure for how to
    create Maintaince View and Help View.
    And what's the use of these view's.
    Regards,
    Kumar

    FOR MAINTANENCE VIEW
    Create a table or a view in transaction SE11.
    A function group in SE80 transaction
    1>go to se54 transaction.
    2>give the name of the table /view starting from z.
    3>select "Generated Objects" radio button.
    4>click on "create/change" push button.
    5>you get a pop asking you whether to create modules ,click on YES
    6>give "authorization group" as temp.
    7>give the function group name created by you.
    8>click on "find Scr numbers "push button on the application tool bar.
    9>in the pop up that you get select the 1st option and press enter
    10>click on the create push button (it is beside "Find Scr numbers" push button)
    11>selct local object and pres enter.
    12>go to SM30 transaction.
    13>give the table/view name
    14>click on "maitain" push button.

  • I plugged my phone into my computer for the first time and it restarted my whole phone so now all my apps say waiting put I'm let my phone sync a view different times and it still doesn't work. Has anyone else had this problem?

    I plugged my phone into my computer for the first time and it restarted my whole phone so now all my apps say waiting put I'm let my phone sync a view different times and it still doesn't work. Has anyone else had this problem?

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • Pics view differently in CS4 v CS3

    Has anyone noticed that images in CS4 view differently to CS3.  Using calibrated monitors with exactly the same icc profiles, pics in PS CS4 seem to be a lot flatter, lacking colour depth. (open the same image in both apps side by side and compare)
    It has been suggested that CS4 talks directly to the graphics card, bypassing color sync, to improve speed.
    Is this causing issues in colour critical operations and if so how is it fixed.

    I have disabled OpenGL but there is still a difference between the two.
    Did you restart Photoshop after disabling Open GL? With Open GL off altogether Photoshop CS4 will display colors the same as CS3. Any differences must be to do with monitor profiles, as far as I'm aware CS3 and 4 also behave the same in these respects.

  • Calendar in List view different from Day and Month view

    When I look at my Calendar in 'List' view all of the Birthdays and Events are in the wrong date but in 'Day' and 'Month' view they are correct. 
    Has anybody found a fix for this yet?  I have looked at similar discussions but they are all a couple of years old and none seem to have found the solution

    It looks like I have found a solution - it is to do with the birthday dates - if you delete the year of any pre-1932 birthdays it solves the problem! 

  • Report needed to view different prices applied in a sales order / invoice

    Hi Friends
                In the sales order/ Invoices there are 2 different prices , List price and another special price . These 2 condition types  are generally determined in pricing .
    Requirement is to have a report which displays these 2 prices per customer per a specified time period .
    Customer wants to see how much discount in the form of special price he received .
    Is there any standard report for this , or can this be created using ABAP queries or Net price list ?
    Regards
    Ragav...

    Hi  All ,
    Thank you all for your quick respose . Let me give your more info for a better understanding of my requirement .  Basically here two prices are to be compared . List price which is based on sales org / distribution channel and material . The other is special price matained for sales org , customer and material . 
    In my system I have 2 different pricing reports ( T- code SAP1 )  , one is based on sales org , material - This I can use to find list price . I also have another customer based report and using this I can get the special price
    But user wants to see both these prices side by side in a single report . Is there a way these two reports can be combined ?
    Regards
    Raghav

  • Colors in viewer different from Photoshop?

    When I view my images in the viewer the colors appear flat and are not as rich as when I open the image in photoshop. I cannot figure out why there is this discrepancy? I would like the images in the viewer to match what I am seeing when I send the image to photoshop.
    Any help appreciated.

    1. Are you using a calibrated monitor?
    2. Have you accidentally turned on soft proofing in Aperture? View>Onscreen Proofing.
    Ian

Maybe you are looking for