Is "remote access" is the best solution here?
Dear;Helpers
1st .. Thanks you anyway
that's my Topology in the figure
i57.tinypic.com/23mv5v9.png
Required:
To access the local website from the tow Ranges.
Suggestion:
To enable “remote access” for IIS (the local site) , so we can visit it on the Internet, or whatever the solution.
Note: Static IP is Supplied.
i know i can do it, if you helped me ..
need the steps..
A friend advised me to make a "remote desktop" instead of "enable routing & remote access"
could i?
Thanks all anyway
Hi,
Based on the figure you provided, I would like to know if the 192.168.3.0 network is a branch office in different location.
->To enable “remote access” for IIS (the local site), so we can visit it on the Internet.
If computers of the 192.168.3.0 network want to access the local website in 192.168.2.0 network through Internet, you should set up VPN connection. If you want to use remote desktop connection, the remote clients also need to connect to the 192.168.2.0 network
through Internet at first. And if the remote access clients connect to the 192.168.2.0 network through VPN, it can access the local site without other operation.
Best Regards,
Tina
Similar Messages
-
What is the best solution for me to run Microsoft Access on my brand new iMAC? Assume I'm a casual user.
I am lead to believe by some real smart guys on the Apple site that If I have the Apple Store partition my iMAC and add the full suite of Office products on that partition, I can run the few Access programs I have and need to run.
Comments encouraged. Thank you in advance for your consideration and help.You would have to install Windows, then install Microsoft Office Professional for Windows on it To install Windows you will have to choose between Boot Camp (faster, free) and a Virtual Machine (simpler, slower, easier to backup)
You should try LibreOffice (free), it can open Access files, it may not have all Access's feature set though, worth a try.
www.libreoffice.org -
What is the best solution for Internet patter access inside of domain BizTalk server?
Hi guys,
Our BizTalk server put the company domain network, it can't access to the internet, just external DMZ can be access from internet.
senario:
Internet partner <=> Extenal DMZ server <=> intenal DMZ server <=> BizTalk Server
1.Internet partner and external DMZ Server can access each other
2.external and internal DMZ Server can access each other
3.internal DMZ Server and BizTalk server can access each other
What is the best solution from your idears? I am look forward your wonderful sharing.
Phile#3 is the most common scenario, but to BizTalk and your app, it doesn't matter.
What you need to find out first from you security team is whether or not they will allow a connection to be made directly to the BizTalk computer or require proxying. -
I have three iPhone 4 models purchased in late 2010 (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library. The problem is I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct. What is the best solution to manage these devices for software updates, apps? This is probably a common problem with families wanting to share apps and music without realizing the issues created by this approach. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates. The problem would be how to keep all the apps, etc from being deleted off the second and third phones that were originally loaded from the one iTunes acct. Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, someone out there can help me?? Please?
I have three iPhone 4 models purchased in late 2010 (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library. The problem is I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct. What is the best solution to manage these devices for software updates, apps? This is probably a common problem with families wanting to share apps and music without realizing the issues created by this approach. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates. The problem would be how to keep all the apps, etc from being deleted off the second and third phones that were originally loaded from the one iTunes acct. Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, someone out there can help me?? Please?
-
What is the best solution to this problem?
I have so many solutions in mind right now but i am looking for the best solution if possible. i have the following query
SELECT one_query.date_required as Month_id,
nvl(one_query.amount_used, 0) as overalluserhours_A,
nvl(second_query.amount_used_b, 0) as overalluserhours_B,
nvl((trunc(((second_query.amount_used_b/one_query.amount_used) * 100), 2)), 0) as p_change
from
(select to_char(b1.needed_date,'YYYY-MM') as date_required,
SUM(b1.amount_used) as amount_used,
b1.type_id as type_id
from table_one b1
where b1.zone_type like 'NEWYORK%'
and b1.type_id = 'CARS'
and trunc(b1.needed_date) between to_date('2009-01-01', 'YYYY-MM-DD') and to_date('2009-12-31', 'YYYY-MM-DD')
group by to_char(b1.needed_date,'YYYY-MM'), b1.type_id) one_query,
(select to_char(b2.needed_date, 'YYYY-MM') as date_required,
SUM(b2.amount_used) as amount_used_b,
b2.type_id as type_id
from table_one b2
where b2.zone_type like
'CHICAGO%'
and b2.type_id = 'BIKES'
and trunc(b2.needed_date) between to_date('2009-01-01', 'YYYY-MM-DD') and to_date('2009-12-31', 'YYYY-MM-DD')
group by to_char(b2.needed_date, 'YYYY-MM'), b2.type_id)second_query
where one_query.date_required = second_query.date_required(+);the above query is being used on table_one. The current problem I am having is based on the fact that table_one might sometimes contain data for only chicago and not for newyork. in this case, table_one would look like this
identification_id needed_date zone_type type_id
2 3/22/2006 12:00:00 CHICAGO BIKES
3 2/12/2006 12:00:00 CHICAGO BIKEShowever though, in other case, it could be the other way around. in this case, table_one will look like this
identification_id needed_date zone_type type_id
4 4/21/2007 12:00:00 NEWYORK CARS
5 1/12/2007 12:00:00 NEWYORK CARS
and finally table_one could contain information for both cases. hence, we could have the following situation
identification_id needed_date zone_type type_id
6 6/21/2008 12:00:00 NEWYORK BIKES
7 8/12/2008 12:00:00 CHICAGO CARSKindly note, my above query is currently being used inside a function. I know I can write so many if statement to handle but the main issue is regarding the fact, i am also using that query in another query which performs so many union all.I'm not sure how you're going to parameterize it, how those filters change from call to call, but an idea would be something like this:
select date_required month_id,
max(amt_used_chicago_bikes) overalluserhours_A,
max(amt_used_newyork_cars) overalluserhours_B,
(max(amt_used_chicago_bikes) / max(amt_used_newyork_cars)) * 100 p_change
from (select zone_type,
to_char(b1.needed_date, 'YYYY-MM') as date_required,
b1.type_id as type_id,
SUM(case when zone_type like 'CHICAGO%' and type_id = 'BIKES'
then b1.amount_used end) as amt_used_chicago_bikes,
SUM(case when zone_type like 'NEWYORK%' and type_id = 'CARS'
then b1.amount_used end) as amt_used_newyork_cars
from table_one b1
where trunc(b1.needed_date) between
to_date('2009-01-01', 'YYYY-MM-DD') and
to_date('2009-12-31', 'YYYY-MM-DD')
group by b1.zone_type,
to_char(b1.needed_date, 'YYYY-MM'),
b1.type_id)
where amt_used_chicago_bikes is not null or amt_used_newyork_cars is not null
group by date_required;Again, this is not the biggest concern regarding performance and certainly not the best way of doing it. Cracking those 250 lines of SQL and making it optimized would probably be the best way to approach the issue here. -
The best solution? Hub-and-spoke, Peer-to-peer, Multi-cast?
By the best solution, I mean in terms of price and quality (latency, minimum lag, etc)
App type: Video conferencing
Platforms: PC, Mobile (Android, iOS) [If mobile support would reduce performance or increase costs, I am willing to scrap it]
Users: There will be 5 - 30 users logged into the service in the same room at a time. And a maximum of 5 - 7 users in that room will have their webcam's on at any given time.
My main concern is performance, Since I might make it a paid service in the future, I don't think users would pay for something that has a lot of lag or trailing effects.
So I was hoping to get some advice on how I should set it up and pros and cons in respect to LCCSHi Sam,
Let me add my two cents here, when speaking about MAN deployments the name of the game is MPLS, so I guess you are using the same on your Cat 6500s and connecting your customers on 3550s using Vlans.
Regarding your questions:
a) Upgrading Ethernet to L3 for traffic shaping: This is basically done at 3550, so I suppose that's what you intend to do, plus you will be letting Spokes talk to only Hub site, so inter Vlan, atleast between Hub and each spoke will be required, hence inter valn routing. Other way is to configure P2P circuits between Hub site with Vlan mapping (per spoke) and Spoke sites with Port mapping, in this scenario Inter Vlan routing is not a necessity.
b) Security: This depends on what exact architecure you have deployed, in my case I have simply installed a Gateway router with BGP peering with PEs, a separate VRF alongwith redistribution does the trick.
Hope I addresses the query correctly, let me know if that helped..
Cheers
~sultan -
I'm an elementary music teacher and my students perform regularly so I have a lot of their performances on my computer. Now I need to free up memory so am wondering what the best solution would be, given that I may need access to these movies again in the future.
I do have an external hard drive, but have never been able to figure out if you can store movies on it, instead of on the computer hard drive.
Thanks so much!Good evening,
I see you have another post about deleting movies and iDVD projects. Wanting the video to be available in the future is a significant criteria because video files are very large and are very compressed to fit on a DVD. If you want the video to be available in the future for additional editing (eg, highlights of the year), ideally you'd want to save the video in a format which will easily allow this. To me, this suggests you delete the iDVD projects but keep the iMovie files for future editing. This accomplishes the easy editing objective but keeps a lot of large files on your hard drive (each iMovie/iDVD project will be about 20% smaller -- assuming a 4 to 1 compression).
If you are willing to accept some additional work in the future and are okay with some reduction in video quality, you can pull sections from an existing DVD and use iMovie to combine them. The extra work is required to decompress the DVD, and this is also the reason for loss of some sharpness. This strategy reduces the file size of your combined projects by about 80% if you save disc images (virtual DVDs), or if you save the physical DVDs, you save 100% of the space.
I'd decide about the tradeoffs before jumping into action.
John -
What is the best solution to the earphones problem?? (Ipod shuffle 3rd gen)
Hey guys,
at the end of the day what is the best solution for that problem with the earphones of the new Ipod shuffle? After do some reading through the forums i came up with a couple of solutions that i could probably choose but i am creating that topic as i would like to hear more about your opinions - suggestions.
The first one of the solutions i thought is that i should go and buy one of these..
http://www.amazon.co.uk/Scosche-tapSTICK-IRMC-Controls-Shuffle/dp/B002CVTU5Q/ref =wlit_dpo?ie=UTF8&coliid=I10ZELYHA99O08&colid=2OIMEI23BWJ9Z
What do you guys thing about that? Is that one of the effective solutions?
And the other option that i was considering is to buy one of this:
http://www.amazon.co.uk/Scosche-IRM35-tapLINE-Control-Headphone/dp/B002CVTU56/re f=wlit_dpo?ie=UTF8&coliid=I2TP2KR5MGFSTJ&colid=2OIMEI23BWJ9Z
What do you guys thing about that? Is that one of the effective solutions?
Well i am looking forward for your replies!!
Just to let you know i wouldn't consider the glue/tape solution as one of my final choices as in my opinion that is not so good to look at and on the other hand who would like to spend his/hers money to buy something good and then you pour glue on it!! Anyway, to finish, buying a 2nd generation Ipod Shuffle is still one of my solutions to that problem, what do you thing is best for me?
RegardsHey there, first of all let me thank you for your help and advice!!
furthermore, as i am intending to use my devise in my car as well by using an fm transmitter
(something like that one: http://www.griffintechnology.com/products/itrip-auto-universal-plus)ALWAYS BEARING IN MIND APPLE'S TWO HUGE MISTAKES:
1)the controls are on the earphones so i would also need to have one of this http://www.amazon.co.uk/Scosche-tapSTICK-IRMC-Controls-Shuffle/dp/B002CVTU5Q/ref =wlit_dpo?ie=UTF8&coliid=I10ZELYHA99O08&colid=2OIMEI23BWJ9Z (WHAT A MISTAKE!!)
AND 2)the purchase of one of these tapSTICKs in addition to a new pair of earphones is needed due to that moisture - sweat problem right?
So what do you guys suggest to me as the best solution to use my ipod in the gym (with all that moisture and sweat!) as well as using it in the car while having the option to change song?
Thank you in advance! -
Traffic shaping: Which is the best solution?
Hi! I'm running 3 computers on 1 d-link router, 2 of them has an archlinux installed. Wondershaper mostly works for me when the other computers has cfosspeed running on windows, but when both computers run archlinux and wshaper and p2p applications, ping is over 1000ms instead of 10-20ms.
Which is the best solution of traffic shaping on linux, and is there a howto for them (can be even a gentoo wiki page or similar)?
Edit: shorewall is not being built from yaourt (x86_64), can't find a usable manual for trickle and niceshaper, (even ubuntu forums has unreplied "threads" about it) and can't start them coz missing config files, it seems, noone cares about ACK priority and ping in the Linux world
Last edited by Vegita (2010-02-24 19:58:07)This config file is being used on 2 computers, and not working, my speed is 8m/1m. Any ideas? I don't want to limit anything, I just want ACK's priority to set to the highest, and same with http, and get p2p apps (opn this computer ktorrent and valknut, on the other ktorrent) priority on lowest. valknut's port is 1412, ktorrents' one is 6881 on this and 24748 on the other computer. Any ideas what to modify for small ping?
# shaping config script for pyshaper
# for more information about pyshaper configuration, refer to the
# file 'pyshaper.conf.readme', and the examples therein
# set the connection-scanning period to 15 seconds (which is very
# aggressive). IF you're more concerned about longer-running
# connections, set this to a longer value (say, 60-300 seconds).
period 30
# declare one network interface, and set its inbound
# and outbound bandwidth in kbits/sec
eth0.ip 192.168.0.180
eth0.in 8096
eth0.out 1024
# This is a test scenario - we're throttling all replies
# from our webserver to max 16kbits/sec, but only if
# the remote client is shell.sourceforge.net
# note - the identifiers 'out', 'pri', 'rate', 'ceil' 'http' and 'test'
# have special meaning (see pyshaper.conf.readme).
# the identifier 'http' is not significant - you can replace
# it with anything, as long as your setup is consistent
# we're setting up a basic 'class' called 'http'
eth0.http.pri 1
eth0.http.out.rate 968
eth0.http.out.ceil 1024
eth0.http.test raddr=='66.35.250.208' and lport == 80
eth0.p2p.test (cmd == '/usr/bin/valknut')
eth0.p2p.test (cmd == '/usr/bin/ktorrent')
eth0.p2p.pri 3
# default traffic gets good bandwidth
eth0.default.out.rate 932
eth0.default.out.ceil 968 -
FLash is it the best solution?
I am in the process of purchasing Flash pro and would just
like to enquire. I am able to integrate Database with Flash Pro,
using either ColdFusion or ASP and will this work for a portable
DB, like the ones that MYSQL / SQL have?
I need to create a catalog DVD/CD is Flash the best solution?
Your advice will be appreciated
ThanksWlpMorton wrote:
Not many webpages can fit entirely on my screen at once with this device. A Toshiba Thrive 10" has a resolution that is only 1280x800. Too old for a Retina display. Just about all pages require scrolling.
Try one of the conversion apps. Search the Play Store for "Web2PDF" for example.
All you have to do is "share" the page to web2PDF, and it will send it to a webpage named "pdfmyURL". The page you want to print will download immediately to your device, and you can then use HP ePrint & Biz to send it to your printer.
Kind of a kludge, but it works!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
The BEST solution for gmail on the iPhone
OK, so after much poking around, I finally figured out the best solution for using gmail on the iPhone: IMAP support.
While I think Google is still rolling this out to all users, once you get it, USE IT! It basically keeps your mail app synced with gmail, and even supports the use of folders/labels.
To see if your gmail account is ready for IMAP, go to the settings option in gmail and see if one of the tabs says "Forwarding and POP/IMAP." If you don't have IMAP available on your account yet, it won't say IMAP.
Here's some links to get you started:
setting up IMAP for gmail on your iPhone:
https://mail.google.com/support/bin/answer.py?answer=77702
how actions in your mail app sync to gmail:
https://mail.google.com/support/bin/answer.py?answer=77657
I hope this helps out everyone as much as it's helped me. I was a little frustrated before using POP, but gotta love IMAP! I'm not too sure the impact that this has on your battery life, but so far it's working well for me. Enjoy!Gmail and IMAP have totally change my tune about the iPhone's email abilities. I was getting frustrated with the inability to reliably get mail (Message has not been downloaded...), sync (have to delete mail from both iPhone and desktop Mac), etc., but now I have all my POP email accounts automatically forward to my Gmail account, and I only check Gmail with the iPhone and MacPro. So far, it's a whole new iPhone experience! No more errors - ALL mail comes through perfectly - and no need to manually sync!
Note that, when setting up the Gmail/IMAP accounts, do NOT simply update your old POP Gmail settings on your Mac or iPhone! Start with a FRESH new account. I couldn't get either the iPhone or Mac to work until I started with a fresh account.
Also, I was unable to send mail from the iPhone using the smtp.gmail address, so I had changed the outgoing mail setting to use my regular ISP's smtp address. But, at some point (a few minutes later or a few hours, I don't know) when I checked the Gmail settings on the iPhone, it had magically changed itself to smtp.gmail, with the port number, and it has been working perfectly ever since! Maybe IMAP can atomatically correct this info? Not sure.
One more thing. Once you have Gmail IMAP working, then you MUST go here:
http://5thirtyone.com/archives/862
Follow these directions exactly. This is a necessary set of steps in order to make your iPhone and Mac sync correctly, so that trashed mail on the iPhone will go in the trash on your desktop Mac, etc. It's pretty freaky to check email on the iPhone, and then go to your Mac Mail a few minutes later, and see all the newly trashed (or saved/read) emails perfectly synched up!
A final note. Once this is all working and synching, remember that if you delete an email on your iPhone, it gets deleted on the desktop Mac Mail as well (and vice-versa)... which is exactly what you want to happen, but I find that I have to remember to keep the mail that I want to save on the iPhone's inbox until I get back to my desktop Mac. Otherwise, I have to manually remove it from the trash to save it! -
Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).
Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false -
My 500 GB can't verify nor repair. I have photoshop work that I need to recover. I would like to know what option would be the best solution for this problem?
You appear to have two issues: 1) a hard drive that is not working properly and 2) files you wish to recover.
Re 1) you need to answer Kappy's questions.
Re 2) does the drive load and can you see your photo files? If so can you copy them to another drive?
Do you not have a backup of the photo files? -
Help Me.
What is the best solution for this problem ?Encore is activated when you activate Premiere Pro... so, as Stan asked, how did you install P-Pro?
Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
-and a fix for Encore http://forums.adobe.com/thread/1421765?tstart=0 in reply #7
-plus more Encore http://helpx.adobe.com/encore/kb/cant-write-image-fie-larger1.html -
SQL Server 2012 - Wat Is The Best Solution For Creating a Read Only Replicated/AlwaysOn Database
Hi there I was wondering if someone may have a best recommendation for the following requirement I have with regards setting up a third database server for reporting?
Current Setup
SQL Server 2012 Enterprise setup at two sites (Site A & Site B).
Configured to use AlwaysOn Availability groups for HA and DR.
Installed on Windows 2012 Servers.
This is all working and failover works fine and no issues. So…
Requirement
A third server needs to be added for the purpose of reporting, to be located on another site (Site C) possibly in another domain. This server needs to have a replicated read only copy of the live database from site A or Site B, whichever is in use. The Site
C reporting database should be as up-to-date to the Site A or Site B database as possible – preferably within a few seconds anyway….
Solution - What I believe are available to me
I believe I can use AlwaysOn and create a ReadOnly replica for the Site C. If so do I assume Site C needs to have the Enterprise version of SQL server i.e. to match Site A & Site B?
Using log shipping which if I am correct means the Site C does not need to be an Enterprise version.
Any help on the best solution for this would be greatly appreciated.
Thanks, Stevefor always on - all nodes should be part of one windows cluster..if there site C is on different domain - I do not think it works.
Logshipping works --as long as the sql on site C is is same or higher version(sql 2012 or above). you can only do read only.
IMHo, if you can make site C in the same domain then, Always is better solution else log shipping
also, if your database has enterprise level features such as - partitonin, data compression -- you cannot restore the database on lower editions- so you need to have enterprise edition.
Hope it Helps!!
Maybe you are looking for
-
IPhone 6: Data not working on T-Mobile?
I recently switched from Verizon to T-Mobile's Simple Choice family plan with unlimited talk, text, and unlimited 2G data (with an additional 2.5G 4G data/month until 2016, it will drop to 1G 4G/month). I have full text and call functionality (sendin
-
Hi! I live in Switzerland and my iTunes and AppStore are in German. I would like to have them in French. Is this possible? Thx
-
I want to delete a few contacts, apps, pics etc from my iphone, but when I delete and connect to my laptop they sync and come back again. How can I delete those items and not get them back when I connect my iphone to my laptop? Also where exactly on
-
I can't see my 2048x1536 folios on my new iPad, only the 1024x768. Do you have any idea, why? Thanks!*
-
Identify Java version from CLASS file
Hi, I have a .class file. I would like to identify the Java version from that. Is there a way to find out? Also, is there a way to find out the Java version from JAR file? Thanks.