Is-retail material

Hi experts,
Is it possible to get IRT100.pdf soft copy?
I request please send if any body have it.
[email protected]
warm regards
marias

You can go to http://help.sap.com and check out the section "SAP For Industries". Within "SAP for Industries" you will Find "SAP for Retail". It is one of the best place, you will get detailed information about SAP for Retail business processes.
Also SAP Education services, organize numerous training programmes. You can check out the traning calendars at www.sap.com within education section
Rgds

Similar Messages

  • Help urgent plz - lsmw retail material.

    hi all, i am posting my message again as this problem seems to have taken me too.
    i am new to lsmw and trying to create a retail material through lsmw. i chose business object method with
    business object as bus1001001.method is 'clone'
    everything has gone well and i could create a material too.
    but in unit field,(i.e the display of all types of units) the legacy data contains 4 rows of units. when i transfer them the new created material displays only one line of units. the other three rows in material display (code transaction- mm43)are empty.
    i have tried using on_change_transfer too but that doesnt seem to make any difference.
    your reply will be a great help. thanks and regards
    ps: i tried with batch input recording method too. but there ,after execution all the rows are filled with the first line of data from the source file. so a failure again.

    I have an LSMW which creates alternitive UOMs.
    Object type is IDoc
    Message Type ARTMAS
    Basic Type ARTMAS02
    Structure Relationships
    E1BPE1MATHEAD
    E1BPE1MARMRTX
    E1BPE1MAMTRT
    E1BPE1MEANRT
    Fields
    ARTICLE_NUMBER                 C(018)    Article Number                     
    OLD_EAN                        C(018)    Old EAN number                     
    NEW_EAN                        C(018)    New ean number                     
    NEW_UOM                        C(005)    New unit of measure                
    NUMERATOR                      C(006)    Numerator for conversion to base UoM
    DENOMINATOR                    C(006)    Denomator to convert to base UoM   
    EANTP                          C(002)    EAN type (HE, UC, Z3 etc)          
    Hope this helps
    SC

  • Lsmw- retail material

    hi all
    i am new to lsmw and trying to create a retail material through lsmw. i chose business object method with business object as bus1001001.method is 'CLONE'
    everything has gone well and i could create a material too.
    but in unit field,(i.e the display of all types of units) the legacy data contains 4 rows of units. when i transfer them the new created material displays only one line of units. the other three rows in material display (code transaction- mm43)are empty.
    i have tried using on_change_transfer and transfer_transaction too but that doesnt seem to make any difference.
    your reply will be a great help. thanks and regards

    I have an LSMW which creates alternitive UOMs.
    Object type is IDoc
    Message Type ARTMAS
    Basic Type ARTMAS02
    Structure Relationships
    E1BPE1MATHEAD
    E1BPE1MARMRTX
    E1BPE1MAMTRT
    E1BPE1MEANRT
    Fields
    ARTICLE_NUMBER                 C(018)    Article Number                     
    OLD_EAN                        C(018)    Old EAN number                     
    NEW_EAN                        C(018)    New ean number                     
    NEW_UOM                        C(005)    New unit of measure                
    NUMERATOR                      C(006)    Numerator for conversion to base UoM
    DENOMINATOR                    C(006)    Denomator to convert to base UoM   
    EANTP                          C(002)    EAN type (HE, UC, Z3 etc)          
    Hope this helps
    SC

  • Delete retail material via batch job?

    Hey guys,
    is there a way to delete a retail material via batch job? I know with transaction MM16 you can schedule a job to do that. But how can i do that without using transaction MM16. Is it possible to this via IDoc?
        thx,
          Wei-Ming

    Check OSS 35615 & 93732.
    Cheers

  • Any send is-retail material and transaction codes

    Hi,
    i am new to is-retail. i need is-retail material and transaction codes.
    1.how can i found article hierarchy?
    2.transaction code for article creation?
    3.transaction for country, zone, state, city, store, concepts?
    4.transaction code for product category?
    Regards,
    venkat.

    Please look at
    Master Data in SAP Retail: Some deep hints
    Regards
    B

  • REQUIRED IS RETAIL MATERIAL

    i required some IS-Retail material .. plz forward some material

    Dear Mohd Amir,
             Please go through this link it will help you about SAP retail
    http://help.sap.com/saphelp_47x200/helpdata/en/50/94f500470e11d1894a0000e8323352/frameset.htm
    I hope it will help you
    Regards,
    Murali.

  • Retail Material Delete Flag

    Hello to All,
    We are using SAP-Retail ECC 6.0.
    How can I put delete Flag for Material Master Records ?
    Thank You

    Hi,
    As per SAP Note 743373, for Retail articles, it is not possible to set deletion indicator in tables MLGN and MLGT.  For standard materials, it is possible to use transaction MM06 to do so.
    For articles blocking, you can change validity of date in Listing to date in "Listing View" in Article Master.
    If you want to discontinue articles, then follow the steps;
    (a) Identify the list of articles for discontinuation (using transaction code WSE1)
    (b) After executing the program, system set deletion flag indicator
    You can set article discontinue at following levels;
    (a) For the Vendor
    (b) For the Assortment
    (c) For the Distribution Chain
    (d) Client-wide
    Hope this info will suffice your requirement.
    Regards - Muralidhara

  • BW Retail - Material variants

    Hello All,
    does anyone knows a business content extractor for SAP retail that allows the extraction of material variants characteristics (color, size) in a similar way as the RIS is updated.
    I know that these characteristics can be retrieved using a classification datasource. But I would want to know if the sequence determination (using the TWORD table)  can be achieved using a business content datasource rather than building my own exit or generic datasource?
    Thanks,
    Tom

    Hey those fields are mandatory fields which needs to be populated in the bapi.
    Please try to give some values in those fields and execute the bapi now..
    It should work fine..
    If you need any further information please let me know..
    Regards
    Satish Boguda

  • Deleting main EAN (MEAN-HPEAN = 'X') in retail material master data

    Hello experts,
    I have a customer (IS Retail) that realized, after data migration from legacy system, that many EAN including the main ones were obsolete or wrong. They asked me to clean all the EANs for a set of items, before deciding the new ones to be migrated.
    I tried 'BAPI_MATERIAL_MAINTAINDATA_RT' that deletes all EAN but not the main one, and I can manage to remove the flag of main ean (MEAN-HPEAN = 'X'), but after that I cannot cancel the last EAN anyway, because in effect it's not correct, as SAP best practices suggest.
    Please consider that all OSS notes available have been implemented, and that I have checked with all available threads and posts on the network with no answer.
    Could please somebody help me?
    thanks in advance
    Chiara

    Hello,
    I used this 'BAPI_MATERIAL_MAINTAINDATA_RT' (that works for RETAIL solutions, otherwise you have to use 'BAPI_MATERIAL_SAVEDATA')
    DATA: T_BAPIE1MATHEAD TYPE BAPIE1MATHEAD OCCURS 0 WITH HEADER LINE.
    DATA: T_RET TYPE BAPIRETURN1 OCCURS 0 WITH HEADER LINE..
    DATA: T_MEAN TYPE BAPIE1MEANRT  OCCURS 0 WITH HEADER LINE.
    (You have to select the material number and EANs you want to delete in two internal tables, such as T_MARA1 and *T_MEAN1, then loop at those tables and:)
          REFRESH: T_BAPIE1MATHEAD, T_MEAN. "T_MARA, T_MARAX.
    *header
          T_BAPIE1MATHEAD-FUNCTION = '003'. "function code for DELETING
          T_BAPIE1MATHEAD-MATERIAL = T_MARA1-MATNR.
          T_BAPIE1MATHEAD-NO_APPL_LOG = 'X'.
          APPEND T_BAPIE1MATHEAD.
    *mean
            T_MEAN-FUNCTION = '003'.
            T_MEAN-MATERIAL = T_BAPIE1MATHEAD-MATERIAL.
            T_MEAN-UNIT = 'ST'.
            T_MEAN-UNIT_ISO = 'PCE'.
            T_MEAN-EAN_UPC = T_MEAN1-EAN11.
            T_MEAN-EAN_CAT = T_MEAN1-EANTP.
            APPEND T_MEAN.
          CALL FUNCTION 'BAPI_MATERIAL_MAINTAINDATA_RT'
             EXPORTING
               HEADDATA                   = T_BAPIE1MATHEAD
            IMPORTING
              RETURN                     = T_RET
         TABLES
          INTERNATIONALARTNOS        = T_MEAN
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
            EXPORTING
              WAIT = 'X'.
    *(Close the loops) This works for all NON MAIN EAN, but not for the main.
    If you are in a non-retail system, this changes into:
    **header
          T_BAPIMATHEAD-MATERIAL = T_MARA1-MATNR.
          APPEND T_BAPIMATHEAD.
            T_MEAN-UNIT = 'ST'.
            T_MEAN-UNIT_ISO = 'PCE'.
            T_MEAN-EAN_UPC = T_MEAN1-EAN11.
            T_MEAN-EAN_CAT = T_MEAN1-EANTP.
            T_MEAN-DEL_FLAG = 'X'.
            APPEND T_MEAN.
         CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
            EXPORTING
            HEADDATA            = T_BAPIMATHEAD
          TABLES
              INTERNATIONALARTNOS = T_MEAN.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
            EXPORTING
            WAIT = 'X'.
    hope this can help
    kind regards
    chiara

  • Retail - material master

    Hi gurus!!
    I modified in SAP retail a description of a configurable article.
    Why only some variant have modify their description and not all the variant???
    Does a rule exist??
    Thanks in advance
    Gio

    Hey those fields are mandatory fields which needs to be populated in the bapi.
    Please try to give some values in those fields and execute the bapi now..
    It should work fine..
    If you need any further information please let me know..
    Regards
    Satish Boguda

  • SAP Retail: Material Master, tab Logistics: DC, Safety stock

    Hello,
    I need some help on the following: In the field Safety Stock (MARC-EISBE). It is possiblre to fill in this field without choosing a specific DC. Is it also posible to maintain this on a generic level (without giving the DC) and that this is copied to all the (relevant) DC's which are created for a specific material? At this moment it is not being copied to all the DCs.
    Thanks
    Oktay

    Hi Yannick,
    I am trying to do the exact same thing. Have you gotten any further on this issue?

  • IS-Retail: Material description in MM41and MM42 transactions

    Hi,
    I'm not able to see the material description in the basic data view, in transaction MM41 and MM42.
    I have already inserted the field MAKT-MAKTX as a mandatory field(OMSR & OMS9), but i still can't see him.
    Somebody can help me?
    Thank you very much and best regards.
    Pedro Barros

    Hi Pedro,
    This field is mandatory by defaul for MM01 and MM02t. Therefore, you should't carry out any change in IMG settings.
    In your IMG settings i.e. transaction code OMSR , please ensure that above settings once again.
    Same data applicable for MM41 and MM42 transactions too.
    Bye,
    Muralidhara

  • Material group hierarchy in SAP Retail

    Hi Guru's;
    I'm looking to load hierarchy of material group in BW.
    In the SAP source system the used standard transaction WG21, WG22CLWM for managing retail material group hierarchy.
    I suppose that from those transaction there is a BW hierarchy to recover this datas.
    I found this datasource 0MATL_GROUP_LKLS_HIER but when i made a test in RSA3 i can't select any hierachy.
    Why ? Is there something special for this hierarchy that i need to manage ?
    Thanks for Help
    Cyril

    Please check this answered link:
    Re: Material Group Hierarchy
    Re: Material Group Hierarchy
    Re: Material Group Hierarchy
    Edited by: Afshad Irani on Jul 1, 2010 1:03 PM

  • Material hierarchy fow BW in a Retail system

    Hi everyone,
    I am trying to charge an material hierarchy on BW. The R3 we are extracting the data from is a Retail one. I know that retail material hierarchy is different in retail in comparation with other systems.
    Can anyone please give me a clue about how to do that? Any information or documentation or an advice?
    Thank you for your help!

    Maybe they are the same.

  • Article Deletion in SAP Retail

    What is the process for deleting an article and then archiving the article in SAP Retail ECC6.0?  So far what I have is to:
    1.  Go to MM46 and find layouts for article
    2.  Go to WLWBN and Delete Assignments
    3.  Go to Assortment in WSP6 and delist from DC and stores.
    4.  Stop replenishment and procurement using MM42 go to Logistics -- General Control Param -- Article Status -- status block article
    5.  Go to ME15 and Mark Info Recs for deletion
    6.  WRF_DIS_SEL - Put in Article and then click "Client_Wide Article Discontinuation" to get green button.  Select All - discontinue
    I need to know what is wrong with the above process, or what do I need to add to the above process?  The issue is that we will go into SARA and try to delete the article and the process ends up not being able to see the article for deletion.  We have no activity against the article and no inventory for that article.  So there must be something I am missing here.

    Probably a bit too late, but check this information:
    Retail Material Delete Flag

Maybe you are looking for