IS Retail Reg

Hi Sap Gurus,
I am new to Retail and got the following issues at the time of creating PO.
1)Article not subj. to inventory mgmt. in site XXXX (Pl. check your input)
2)Account assignment mandatory for article ZZZZ (enter acc. ***. cat.)
Message no. ME062
Can you please throw some light on these issues.

Hi Hanuma,
Problem1: "Article not subj. to inventory mgmt. in site XXXX (Pl. check your input)"
Sol1:
Could be due to the following reasons:
a. Incomplete config of inv. mgmt.
b. Due to Problem2, rectify prob2 then try.
c. The Article type you are using is of service type, and service can not have inventory management.
d. In the Material master check in purchasing view for plant specific material status if it is defined as
   blocked for inventory management. Then you may get this error.
Problem2: "Account assignment mandatory for article ZZZZ (enter acc. ***. cat.) Message no. ME062"
Sol2:
When you raise a PO you have to Check Value Updation for your Plant to avoid this type of errors.
Goto OMS2 and select the material type for which you have created this Material.
Click on Quantity and Value Updation under Dialogue Structure.
Select your Plant and activate Value Updation.
Hope it helps.
Regards,
Anirabn Roy

Similar Messages

  • Business process reg. SAP in retail or multichain sales

    Hi,
    Can u tell the business process reg. SAP in retail or multichain sales ?
    RAAJ

    Hello László,
    in a nutshell BPM Netweaver is focussing on so called edge-processes (usually
    SOA-based and often workflow related). These edge-processes a thought to enhance exisitng core business processes and should provide the fast competitive edge versus competitors. Examples would be also xApps. For this Netweaver provides process modelling tools, where you can get exectuable code through the integration between CE and PI. The monitoring part for these processes is mainly targeting business end-users and business manager.
    Business Process Monitoring with Solution Manager focusses on core business processes which are realized with the "conventional", "old"  SAP Architecture, e.g. Order-to-Cash or Procure-to-Pay. You get a combination of technical monitors (average response times of transactions, background job runtimes, monitors for IDOC or qRFC processing) and application related monitors (you get more than 200 pre-configured application monitors out-of-the-box like number of overdue customer orders or outbound deliveries or number of deliveries with goods issue posted but no invoice). The target group here is the support organization of the customer, from Basis-Support over application support on IT side to process owner on business department side.
    Overview presentations can be found under
    https://service.sap.com/bpm --> Media Library --> Customer Information -->
    "Business Process Monitoring - Part 1 & 2".
    Or look under https://www.sdn.sap.com/irj/sdn/nw-processmonitoring
    In the end BPM Netweaver and BPMon SolMan are complementary for different purposes and different target groups.
    Best Regards
    Volker

  • Reg: IS Retail Promotions Confguration

    Hi Gurus,
               Could anyone provide useful links for IS- Retail Promotions Configuration apart from SAP Help Library links ?
    I need documents for Configuring Retail Promotions Coupons,Bonus Buy and Free Goods  for my Client.
    Thanks and Regards,
    R.K

    Hi Ravi
    find promotion config doc of IS Retail
    2.3     Retail Promotion
    2.3.1     Number Ranges, Promotions
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Number Ranges, Promotions
    Details of the configuration     Standard Settings Maintained
    2.3.2     Promotion Category
    Table     V_TWTY, TWTY, TWTYT
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Promotion Category
    Details of the configuration     Standard Settings Maintained
    2.3.3     Promotion Type
    Table     V_TWAA, TWAA, TWAAT, TVKO, TVKOT, TVTW, TVTWT, KNA1, T001W
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Promotion Type
    Details of the configuration     Following Promotion Types Created
    •     BC01     Barista Promotion Type
    Select entries & click on Magnifying glass icon
    1.     BC01 –
        Promotion - DC Price
        Following Settings Maintained
         Promotion Category = BC01
         Create SP conditions Activated
         Without Calculation – Activated
                 Price Activation Type – 2 (Site Group)
         List Group –A
         List Variant – 02
         Cond Group Purch –
         Cond Type Group SP – BC01
         SP Sales Org –
         SP dis Channel –
         CondType % Discount – KA02
         CondType Abs Discount – KA04
         No Range Int assgt – 01
         No Range ext assgt – AA
         Lead time Purch – 10
         Follow-on time Purch – 02
         Lead Time Listing – 30
         List. Follow Up time – 30
         Announcement Lead Time – 5
         Lead Time Store Gr – 3
         Alloc Table Type – 1000
         Announcement Category – F
         Message Schema – RTBN01
    2.3.4     Promotion Themes
    Table     V_TWAT, TWAT, TWATT
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Promotion Themes
    Details of the configuration     Standard Setttings Made
    2.3.5     Control for Condition Tables for Promotion Discount
    Table     V_TWREB, TWREB
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Control for Condition Tables for Promotion Discount
    Details of the configuration     Settings Made for condition type KA02 & KA04.
    ConditionType     Organization Level     Article Disc Lvl     Table
    KA02     02     01     4
    KA02     02     02     359
    KA02     02     03     359
    KA02     02     04     359
    KA04     02     02     677
    KA04     02     03     677
    KA04     02     04     677
    2.3.6     Promotion Determination in Sales Order Processing
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Promotion Determination in Sales Order Processing
    Details of the configuration     No Settings Made.
    2.3.7     Condition Type Groups For Promotions in Purchasing
    a.     Assign Condition Type/Table to Condition Type Groups
    Table     V_T6B2F, T6B2F, T681A, T6B2, T681B, T6B2T
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Condition Type Groups For Promotions in Purchasing  Assign Condition Type/Table to Condition Type Groups
    Details of the onfiguration     No Settings made.
    b.     Assign Condition Type Groups and Arrangement Types
    Table     V_T6BM_ZU, T6B1, T6B1T
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Condition Type Groups For Promotions in Purchasing   Assign Condition Type Groups and Arrangement Types
    Details of the configuration     No settings maintained
    2.3.8     Condition Type Groups For Promotions In SD
    a.     Define Condition Type Groups for Promotions
    Table     V_T6B2, T6B2, T6B2T
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Condition Type Groups For Promotions In SD  Define Condition Type Groups for Promotions
    Details of the configuration     Standard Settings Maintained
    b.     Assign Condition Type/Table to Condition Type Groups
    Table     V_T6B2, T6B2, T6B2T
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Condition Type Groups For Promotions In SD  Assign Condition Type/Table to Condition Type Groups
    Details of the configuration     Settings maintained for Condition Type Group 0007
    Cond Typ Grp     Cond Type Grp     Cntr     CnTy     Condition Type     Number     Table
    0007     Promo Conditions 2     10     VKA0     Promo SP        IS-R     6     Price List Type/Currency/Article
    0007     Promo Conditions 2     11     VKA0     Promo SP        IS-R     73     Article per SOrg/DstCh
    0007     Promo Conditions 2     12     VKA0     Promo SP        IS-R     71     Article per Site
    0007     Promo Conditions 2     20     KA03     Promo Discount % 2     71     Article per Site
    0007     Promo Conditions 2     21     KA03     Promo Discount % 2     155     Sales Org./Dist. Channel/Price List/
    Article/Sales Unit
    0007     Promo Conditions 2     22     KA03     Promo Discount % 2     73     Article per SOrg/DstCh
    0007     Promo Conditions 2     30     KA05     Promo Discount MD 2     71     Article per Site
    0007     Promo Conditions 2     31     KA05     Promo Discount MD 2     155     Sales Org./Dist. Channel/Price List
    /Article/Sales Unit
    0007     Promo Conditions 2     32     KA05     Promo Discount MD 2     73     Article per SOrg/DstCh
    c.     Assign Condition Type Groups and Arrangement Types
    Table     V_T6B2, T6B2, T6B2T
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Condition Type Groups For Promotions In SD  Assign Condition Type Groups and Arrangement Types
    Details of the configuration     Standard Settings Maintained
    2.3.9     Message Determination
    a.     Single Messages
    1.     Create Condition Table
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Message Determination  Single Messages  Create Condition Table
    Details of the configuration     No Settings Maintained
    2.     Change Condition Table
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Message Determination  Single Messages  Change Condition Table
    Details of the configuration     No Settings Maintained
    3.     Display Condition Table
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Message Determination  Single Messages  Display Condition Table
    Details of the configuration     No Settings Maintained
    4.     Access Sequence
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Message Determination  Single Messages  Access Sequence
    Details of the configuration     Standard Settings Maintained
    5.     Message Type
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Message Determination  Single Messages  Message Type
    Details of the configuration     Standard Settings Maintained
    6.     Message Schema
    Table     V_T683S_XX, T683S, T683T
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Message Determination  Single Messages  Message Schema
    Details of the configuration     Standard Settings Maintained
    Select entry & click on Control Data
    7.     Assign Schema to Document Type
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Message Determination  Single Messages  Assign Schema to Document Type
    Details of the configuration     No Settings Maintained
    8.     Assign Program/Form to Message Types
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Message Determination  Single Messages  Assign Program/Form to Message Types
    Details of the configuration     No Settings Maintained
    9.     Requirements for Message Types
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Message Determination  Single Messages  Requirements for Message Types
    Details of the configuration     Standard Settings Maintained
    b.     Group Messages
    1.     Number Ranges, Group Message
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Message Determination  Group Messages  Number Ranges, Group Message
    Details of the configuration     Standard Settings Maintained
    2.     Message Type
    Table     VN_T685B, T685, T685B, T685T, T682, T682T, TCSTR, TCSTRT, T681Z, T681A, T681B
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Message Determination  Group Messages  Message Type
    Details of the configuration     Standard Settings Maintained
    3.     Assign Program/Form to Message Types
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Message Determination  Group Messages  Assign Program/Form to Message Types
    Details of the configuration     No Settings Maintained
    2.3.10     Business Add-In for Promotion
    Transaction Code     SPRO
    Menu Path     IMG  Logistics - General  Retail Promotion Business Add-In for Promotion
    Details of the configuration     No Settings Maintained
    Thnaks
    Amit Shivhare
    PS Reward Point
    Edited by: Amit Shivhare on Mar 10, 2008 3:44 PM

  • Reg:SAP IS Retail

    Hi All,
            Could anyone tell me whether we have any standard package available for SAP-PI to  ISretail .
    Thanks in Advance,
    Lavanya.B

    Hi All,
    Karna,Thanks for the quick response.Can you please provide me the URL for the same.
    I am configuring a scenario like ISRetail->XI/PI-->FTP.
    Let me know if any standard package available for ISRetail to SAP PI .If so please provide me  the package name in the service market place.
    Lavanya.B
    Edited by: Lavanya Balanandham on Feb 23, 2009 7:36 AM

  • Ei.cfg not being seen by windows installer on Windows 7 Home Premium 64 bit retail disk.

    My problem is that the retail disk of Windows 7 Home Premium 64bit has no ei.cfg restrictions. Instead of choosing the correct operating system ID, on install, the .cfg
    is coming from some where else installing a custom version of windows that is a different version of windows than on the retail install disk that I have a software key to. Even though it recognizes the key as windows 7 the operating system no longer recognizes
    the retail disk it was installed from as the same version of operating system. It seems that there is a pre operating system install to a volume that cant see the ei.cfg file on the windows retail disk. It is something like Windows ME or MCE and it is hard
    to get past because it acts  like the operating system after install. It looks like there is a complete install of windows 7 but it is only a version of ME or MCE in the 100MB range installed to a partition volume. I am given a User account Profile within
    Application Data folder  in the system. The actual windows system in its entirety does not exist in the partial virtual operating systems. All the installs are to Partition Volumes on the Partition of a GPT Server Partition on a Disk
    on the Hard drive. All Virtual.
    Windows 7 Home Premium 64bit and 32bit retail disk is GSP1RMCHPXFRER_EN_DVD. The bios version on my Asus G75VX is American Megatrends version 206, V Bios version 80.04.97.00.13.N62G75500, EC version B14E140001. The operating system version is not the same
    as the install disk. The boot configuration is; American Megatrends Bios Aptio Setup Utility installed. :\\?|GLOBALROOT\Device|HarddiskVolume1\EFI\Microsoft\Boot\BCD.Backup.0001 Software build after install is Buildlab 7601.Win7Sp1_rtm.101119-1850 Client install
    BuildlabEx 7601.17514.amd64Fre.Win7Sp1_rtm.101119-1850, CSD Build Number 1130, Product ID 00 359-112-0000007-85245, Product ID 55034-112-0000007-05640. System Reserved Partition Volume X:\{F750E6C3-38EE-11D1-85E5-00C04FC295EE} MININT-F26UD4N. Link to 170MB
    .reg file in text format http://1drv.ms/1m9RXL7.
    The above information was taken after an install from the Microsoft Windows 7 64 bit retail disk purchased at Fry's and installed to my Asus G75VX. It is a Network Managed Client Server configuration that installs from the retail disk.

    I have been dealing with this problem since the day I purchased the first notebook from Best Buy configured this way and it was not even an Asus. It was a Samsung Chronos i7. The Asus G75VX I have now is the third notebook in a row purchased from Best Buy
    with the configuration right out of the un open retail box. None out of the three came with windows 7 installed. They had windows 8 64bit installed with the configuration. I purchased Windows 7 Home Premium 64 bit attempting to get around the configuration
    problem.
    My main concern is that I use computers to do my legal documents in court cases in the United States Federal Courts and I am a pro se litigator and I have been litigating a civil action since 2011 that is still open in the federal court. I am also legally
    disable and covered by Federal Communications Act FCC Rule 255. This configuration has Telephone software and equipment, Management Software and equipment, and Networking software and equipment all covered within FCC Rule 255. My notebook is unusable for litigation
    or personal use as a Publicly Managed Network Client Server. I paid $1350.00 of my Social Security Disability income for the Asus G75VX and another $216.00 for Windows 7 Home Premium 32 and 64 bit DVD and that is not counting a list of other things to
    now have a personal notebook computer I have to sat down beside me in public libraries, Colleges etc. to use their computers to do my legal work. It is illegal and total wrong and it is a violation of the Bill of Rights First and Fourth Amendments and Title
    VI of the Civil Rights Act of 1964 and the American with Disability Act outside of 255.

  • Goods movement in a retail using document splitting by profit center

    Hello Gurus,
    I am in a retail implementation, our requirement is to make a goods moviment from one store to another (where stores are profit centers). But they want to have zero balance document spliting by profit center. (balances by store)
    Does any one know how could the document finally be posted if the original movement is:
    1000 goods  40                   profit center 1
    1000 goods         40            profit center 2
    Thanks in advance,
    answer will be rewarded!
    Alex

    Hello Aravind
    Pls check this link
    http://help.sap.com/saphelp_erp2004/helpdata/EN/87/3da04028f40160e10000000a1550b0/content.htm
    Maybe of some help.
    Reg
    suresh

  • Is it possible to retrieve a registration key for a hard copy of iWork 06? Moved and cannot locate disc, and replaced the computer it was originally installed on. When I transferred the program to new Macbook, the reg key apparently didn't transfer.

    Is it possible to retrieve a registration key for a hard copy of iWork 06? Moved and cannot locate disc, and replaced the computer it was originally installed on. When I transferred the iWork from original Macbook Pro to new Macbook Pro, the reg key apparently didn't transfer. Any ideas?

    Do you still have access to the old MacBook Pro? If so, you can transfer the license by copying the com.apple.iwork.plist from Macintosh HD > Library > Preferences to the same location on the new Mac. Note that this IS the main HD Library, not your user library. I have found that these files are not moved during setup or migration.
    Are you really running Tiger 10.4.7? If so, you should update to 10.4.11. You can find the updater here. You also might consider buying the retail disk of iWork '09 from a third-party such as Amazon.com or eBay. It will add a lot of features for you. iWork '09 does require Tiger 10.4.11 at a minimum.

  • How to delete the Sites in SAP IS RETAIL

    hello ALL,
    can any one explain me how to delete the Sites in Sap Retail.
    thanks in advance

    Hello All,
    Delete the plant / Site complete details and put in one transport and do the import & export.
    Thanks.
    Edited by: krishna cherry on Jul 26, 2010 3:28 PM

  • Free goods in Retail

    Hi
    These are scenario for Beverage business- mostly they have complicated promotion on free gifts which I think SAP ERP SD cannot cover it. I also check Promotion in retail and found out, if it's discount - it can handled but for free goods - there is similar to ERP Sales. If anyone can take a look at the below case and share with me whether IS-Retail can handle it or any idea how to handle it as now I can only think of custom development.
    This is pretty much general scenario in Thailand, not only beverage but wholesales & distribution but I don't think SAP ERP can handle it smoothly.
    1. Buy soda water size 10 oz regardless of soda taste (coke, orange, grape) for 1 pack (1 pack consist of 24 bottles) then get 1 bottle free.
    2. Buy soda water size 10 oz regardless of soda taste for 1 pack, then get 1 bottle free - maximum at 2 sets.
    3. Buy soda water either size 10 oz or 15 oz for 1 pack, get 1 bottle of 10 oz free
    4. Buy soda water regardless of soda taste as set i.e. for every 36 packs of combine size 10 oz, 15 oz and 1 lt - get free items of 10 oz/15 oz for 2 bottles per pack and free item of 1lt for 1 bottle per pack
    5. Similar to 4 with additional condition that 1 soda taste must be more than 50%  - for example, it must be coke at least 50%
    6. Sales quota - Buy 1 pack, get 1 bottle free - maximum 100 bottles for each customer
    Please kindly share your experience or ideas. Thank you
    Chanchana

    HI,
    1. Use txn VBK1 to create a bonus buy condition
    2. In SAP Retail, we can create % Off Conditions, Absolute Off Conditions as standard promotion conditions, Special Price Conditions.
    3. You can also can create Bonus Buy: Price, Bonus Buy: % Discount, Bonus Buy: Absolute Discount and Bonus Buy: Free Goods conditions.
    For Example: Buy 4 Get 1 Free Article is a Bonus Buy condition. for this try In VBK1, use Discount Type BB04 to configure bonus buy.
    For more information plz try this link http://help.sap.com/erp2005_ehp_03/helpdata/EN/40/c0e238f0d111d2adff080009d2232d/frameset.htm
    Regards
    GK.

  • Free Goods Promotions for Retail.

    Hi SAP Retail Xperts.
    Actually I am working with Promotions for retail industry, and I am using the transaction WAK1, in order to create them.
    Our client, work with free goods (exclusive bonus quantity) and I can see that the WAK1 transaction has a view for that, but the Create Free Goods button IS NOT  active.
    Does anybody knows how could I active it. If it is active, I will be able to create a Free Goods exclusive bonus quantity from WAK1 transaction???.
    Thanks in advance.
    Manuel

    Hi Machacon,
    Create Promotion in WAK1.Enter Articles in fast entry tab,Quantity in
    Quantity Planning tab,site groups in site group tab.Save your promotion.
    Go to your newly created Promotion in change WAK2, now you go to Free goods tab
    where you can see free goods button in active form.
    Hope this help you.
    Regards,
    Mohanavel

  • Handling of Hazardous Articles in SAP Retail

    Hi SAP Retail Experts
    Would like to know the porcess in SAP to configure the hazardous goods management in Article master whereby we can accomodate the dangerous goods data from and external system into Article Master.

    Dear Pratim
    I don't catch your question. Check e.g. SAP Environment, Health, and Safety Management (SAP EHS Management)
    1.) the term "Dangerous Goods" and Hazard substance" is not the same
    2.) In EHS classic you can get external data for DG use using ALE; same is true for hazardous substance master
    I have no experience with SAP Retail. But according to SAP help: This is a SAP ECC/ERP system in a "special"  mode (you have activated an "industry specific" function). So you need to prepare EHS customizing
    C.B:

  • I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

    I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

    IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.

  • Mail can't send email from 123-reg accounts

    Hi all,
    I've got an issue with Mac Mail can’t send email from 123-reg accounts.
    I know there is a lot of articles on simular matters and some I have tried out with no luck, others are just speaking a whole other language.
    Any help would be greatly recived, here's my situation below:
    Running a iMac 2.8GHz Intel Core i5 on OS X 10.8.3
    I’m using 3 accounts on Macs Mail client, one is my iCloud account that is working fine and the other two are my 123-reg accounts that I use for business purposes. I’ve been working like this for a couple of years now and about 6 months ago I upgrade my operating system from Snow Leopard to Mountain Lion.
    2 or 3 months ago I randomly got a problem where I was unable to send any emails from my 123-reg account, I could only receive emails. I checked my settings and they were all correct and unchanged so I attempted to delete them and recreate the account but with no such luck.
    I then decided to check if it was a problem at 123-regs end and attempted to log into web mail. This worked and was able to both send and receive emails so eliminated that possibility.
    I also have these accounts set up on my iPhone, so checked if there was any issues and everything was working fine. I then checked my iphone details and made sure the same was on my desktop and still no such luck.
    I’ve tried out some of the articles I’ve found on here (the ones written in plain English) still no results. I’m not very IT illiterate and just wondered if anyone else has got any ideas, whether there is something specific with 123-reg accounts and Mac Mail?
    Many thanks.

    Thanks
    I just had another hunt around looking at posts and discovered that it was because I recently changed to BT Infinity and they had a block on.
    I didn't even think to question the ISP.
    https://discussions.apple.com/message/21173608#21173608

  • IS Retail - Inventory - Retail price BWGV0 is not getting populated

    Hi ,
    We have activated IS retail industry specific indicator in SBIW. Fo some reason when I do RSA3 in '2LIS_03_BF' , all the stock movements are displayed but the retial price field BWGV0 is not getting populated. Do you guys have come across this situation ? Please let me know.
    Thanks
    Hareesh

    Some documents below might worth taking look..
    Process key logic for MM inventory can be found in OSS note 492828
    Logic for MM purchasing can be found in note 684465
    Activating the process key logic in R/3 for MM should be as simple as setting the correct industry in MCB_ (also found under SBIW), but if it doesn't work look at OSS note 353042. In the end haveto use trans BF11 to add an entry to a table, even though the plugin is 2003.1 on R/3 4.6C.
    352344
    492828 Determining the transaction key for 2LIS_03_BF + 2LIS_03_UM
    Hope it Helps
    Chetan
    @CP..
    Hope it Helps
    Chetan
    @CP..

  • I bought this iPhone from Apple Retail Store for the full amount, but  it does not work with my SIM card only works with AT&T

    Hello,
    I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
    I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
    Thanks,
    Best Wishes

    When did you buy it?
    Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
    What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason.  Return it and get your money back, then use that to purchase an unlocked phone.

Maybe you are looking for

  • Firefox 4.0 Yahoo 1.8 won't open pdfs

    Recently upgraded Firefox. Bad idea. Now it's very slow, some pdfs won't open, and some sites don't open at all. Also, it switched my search tab from Google to Yahoo, zapped Wikipedia from my bookmark toolbar, and put the Yahoo brand at the top of th

  • System calls in Java

    Any suggestions how one would perform a UNIX call inside a C++ or Java program? Student who needs help.

  • Error when re-loading QuickTime

    Recevied msg stating I needed to unload and load QuickTime. Unload appeared sucessful but nowreceiving the following error when trying to download Quicktime: c:\Documents and Settings\Owner.YOUR-B54A0F8E5B\Local Settings\Temporary Internet Files\Cont

  • Transaction code to go to sap Inbox

    Hi   Do anyone have an idea what is the transaction code to sap inbox. I know through SBWP we can go, there is another transaction it seems. What is that. I have searched in table TSTC but i could not find that. Could anyones know this please help me

  • Compare object version between BW system

    Hi, I want to check object version between DEV system and Quality System. Is there any program to do that in BI7? Regards,