IS Retail:Report/Document generation for inbound IDOC for Cashier Statistic

Hi Friends,
I have generated an inbound IDOC for Cashier Statistics with transaction WPUK in IS retail.
The IDOC is generated successfully which I can view in POS interface monitor with transaction WPER.
But i dont see any corresponding report or document generated for this successfully posted IDOC.
Is there a functionality in IS retail to generate report/document for successfully posted IDOC for cashier statistics?
Request you valuable inputs on this please.
Regards,
Debraj

Hi John,
Thanks for your inputs.
Could you please let me know how do i activate infostructure S122 to see reports related to cashier statistics after successful posting of IDOC?
Regards,
Debraj

Similar Messages

Exit for Inbound IDOC for Invoice

Hello friends,
I recevie a IDOC and the Invoice is created with the data in the IDOC.
The invoice is created at the
FM - IDOC_INPUT_INVOIC_MRM
and within the FM - MRM_INVOICE_CREATE.
The document # is e_belnr.
My requirement is to Save the IDOC_DATA as Image and I have Developed a FM to create a Image from this IDOC data. However I am looking for an USER EXIT where I could capture the document Number and do it further.
ANy Suggestions.
Ster

Hi you may want to check the enhancements RMVKON00 & MM08R002.

Creation of Inbound Idoc for the Outbound Idoc in same client

Hi,
My requirement:
Whenver an PO is created an Outbound IDOC is generated in system ABC with client 100.I want to pass this IDOC data to create an Inbound Idoc for Sales Order(SO) in the same client.
It would be helpful if anyone can answer on how to Transfer the Outbound Idoc after it crosses the port.
I found there is a field for function module in WE21,can this be used to get the requirement done.
Please suggest.
Regards,
Amar

Example of a program that create and post an inbound idoc....maybe that will help you:
report zzinbound_idoc.
data: g_idoc_control_record like edi_dc40 occurs 0 with header line.
data: g_edidd like edi_dd40 occurs 0 with header line.
data: g_e1bpache09 like e1bpache09.
parameter: mode type c default 'A'.
refresh: g_idoc_control_record, g_edidd.
clear:   g_idoc_control_record, g_edidd.
*-Build Control Record -*
g_idoc_control_record-mestyp = 'ACC_DOCUMENT'.   "Message type
g_idoc_control_record-idoctyp = 'ACC_DOCUMENT03'. "IDOC type
g_idoc_control_record-direct = '2'.              "Direction
* Receiver
case sy-sysid.
when 'DE2'.
    g_idoc_control_record-rcvpor = 'SAPDE2'.     "Port
    g_idoc_control_record-rcvprn = 'IDOCLEGACY'. "Partner number
endcase.
g_idoc_control_record-rcvprt = 'LS'.             "Partner type
g_idoc_control_record-rcvpfc = ''.               "Partner function
* Sender
g_idoc_control_record-sndpor = 'A000000002'.      "tRFC Port
case sy-sysid.
when 'DE2'.
    g_idoc_control_record-sndprn = 'IDOCLEGACY'. "Partner number
endcase.
g_idoc_control_record-sndprt = 'LS'.             "Partner type
g_idoc_control_record-sndpfc = ''.               "Partner function
g_idoc_control_record-refmes = 'Customer clearing'.
append g_idoc_control_record.
*-Build Idoc Segments -*
*---E1KOMG
clear g_edidd.
clear g_e1bpache09.
g_edidd-segnam               = 'E1BPACHE09'.
g_edidd-segnum               = 1.
move g_e1bpache09 to g_edidd-sdata.
append g_edidd.
*-Create idoc -*
*-Syncronous
if mode = 'S'.
call function 'IDOC_INBOUND_SINGLE'
    exporting
      pi_idoc_control_rec_40              = g_idoc_control_record
*     PI_DO_COMMIT                        = 'X'
*   IMPORTING
*     PE_IDOC_NUMBER                      =
*     PE_ERROR_PRIOR_TO_APPLICATION       =
    tables
      pt_idoc_data_records_40             = g_edidd
    exceptions
      idoc_not_saved                      = 1
      others                              = 2.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*-Asynchronus
else.
call function 'IDOC_INBOUND_ASYNCHRONOUS'
    in background task as separate unit
    tables
      idoc_control_rec_40 = g_idoc_control_record
      idoc_data_rec_40    = g_edidd.
commit work.
endif.
write: / 'Well done!'.

Inbound Idoc for own Message type

Dear All,
I have created a message type for outbound and sent data to the Java System.But when distributing in BD64 inbound parameters are not getting created.
For inbound idoc if i am creating a new message type,How i can get data from external server and commit it in database.
We have to write any program as we do for outbound?
Another issue outbound idoc is in waiting status i have to process it in BD87.How i can sent it immediately and in partner profile, distributing in module view BD64 i have given Transfer IDoc Immediately.
PLZ reply ASAP.
Thanks & Regards,
Arun.

Dear rhea,
I want to receive the IDOC data for message type WPUUMS from a java server. Currently i am working on sample values for segments
E1WPU01
E1WPU02
E1WPU03
E1WPU04
E1WPU05
E1WXX01
I am facing problems in passing the correct values .
Its throwing a error message status 51.(Application document not posted) IDoc not fully processed.
can you help me with some dummy data for all the fields in the above segments.
reply ASAP
regards
arun

Step-by step procedure for INBOUND IDOC (VENDOR CREATE / CHANGE)

Hi ,
Can any body provide me the step-by-step procedure for Inbound IDOCS.
As i'm new to this i need the the clarification between Inbound & outbound idocs.
How can we differentiate both?
where to define outbound & where to define Inbound?
( If possible Please explain me the procedure for Vendor Create through INBOUND IDOCS )
Thanks in advance..

Hi,
Ale Technology is SAPu2019s technology to support distributed yet integrated processes across several SAP systems.
Outbound Process:
ALE Outbound Process in SAP sends data to one or more SAP Systems. It involves four steps.
1. Identify the need of IDoc: This step starts upon creating a application document, can relate to a change to a master data object.
2. Generate the Master IDoc: The document or master data to be sent is read from the database and formatted into an IDoc format. This IDoc is called as a Master IDoc.
3. Generate the Communication IDoc: The ALE Service layer generates a separate IDoc from the Master IDoc for each recipient who is interested in the data. Separate IDocs are generated because each recipient might demand a different version or a subset of the Master IDoc. These recipient-specific IDocs are called Communication IDocs and are stored in the database.
4. Deliver the Communication IDoc: The IDoc is delivered to the recipients using an asynchronous communication method. This allows the sending system to continue its processing without having to wait for the destination system to receiver or process the IDoc.
Inbound Process:
The inbound process receives an IDoc and creates a document in the system.
1. Store the IDoc in the database: The IDoc is received from the sending system and stored in the database. Then the IDoc goes through a basic integrity check and syntax check.
2. Invoke the Posting Module: The control information in the IDoc and configuration tables are read to determine the posting program. The IDoc is then transferred to its posting program.
3. Create the Document: The posting program reads the IDoc data and then creates a document in the system. The results are logged in the IDoc.
Over view of IDocs:
IDoc is a container that is used to exchange data between any two processes. The document represented in an IDoc is independent of the complex structure SAP uses to store application data. This type of flexibility enables SAP to rearrange its internal structure without affecting the existing interface.
IDoc interface represents an IDoc Type or IDoc data. IDoc Type represents IDocu2019s definition and IDoc Data is an instance of the IDoc Type.
IDoc Types:
IDoc type structure can consist of several segments, and each segment can consist of several data fields. The IDoc structure defines the syntax of the data by specifying a list of permitted segments and arrangement of the segments. Segments define a set of fields and their format.
An IDoc is an instance of an IDoc Type and consists of three types of records.
i. One Control record: each IDoc has only one control record. The control record contains all the control information about an IDoc, including the IDoc number, the sender and recipient information, and information such as the message type it represents and IDoc type. The control record structure is same for all IDocs.
ii. One or Many Data records: An IDoc can have multiple data records, as defined by the IDoc structure. Segments translate into data records, which store application data, such as purchase order header information and purchase order detail lines.
iii. One or Many Status records: An IDoc can have multiple status records. Status record helps to determine whether an IDoc has any error.
Message in IDoc Type:
A Message represents a specific type of document transmitted between two partners.
Outbound Process in IDocs:
Outbound process used the following components to generate an IDoc. A customer model, and IDoc structure, selection programs, filter objects, conversion rules, a port definition, an RFC destination, a partner profile, service programs, and configuration tables.
The Customer Model:
A customer model is used to model a distribution scenario. In a customer model, you identify the systems involved in a distribution scenario and the message exchanged between the systems.
Message control:
Message control is a cross application technology used in pricing, account determination, material determination, and output determination. The output determination technique of Message control triggers the ALE for a business document. Message control separates the logic of generating IDocs from the application logic.
Change Pointers:
The change pointers technique is based on the change document technique, which tracks changes made to key documents in SAP, such as the material master, customer master and sales order.
Changes made to a document are recorded in the change document header table CDHDR, and additional change pointers are written in the BDCP table for the changes relevant to ALE.
IDoc Structure:
A message is defined for data that is exchanged between two systems. The message type is based on one or more IDoc structures.
Selection Program:
Is typically implemented as function modules, are designed to extract application data and create a master IDoc. A selection program exists for each message type. A selection programu2019s design depends on the triggering mechanism used in the process.
Filter Objects;
Filter Objects remove unwanted data for each recipient of the data basing on the recipients requirement.
Port Definition:
A port is used in an outbound process to define the medium in which documents are transferred to the destination system. ALE used a Transactional RFC port, which transfers data in memory buffers.
RFC Destination:
The RFC destination is a logical name used to define the characteristics of a communication link to a remote system on which a function needs to be executed.
Partner Profile:
A partner profile specifies the components used in an outbound process(logical name of the remote SAP system, IDoc Type, message type, TRFC port), an IDocu2019s packet size, the mode in which the process sends an IDoc (batch versus immediate), and the person to be notified in case of error.
Service Programs and Configuration Tables:
The outbound process, being asynchronous, is essentially a sequence of several processes that work together. SAP provides service programs and configuration tables to link these programs and provide customizing options for an outbound process.
Process flow for Distributing Transactional Data:
Transactional data is distributed using two techniques: with Message control and without message control.
Process flow for Distributing Master Data:
Master data between SAP systems is distributed using two techniques: Stand alone Programs and Change Pointers.
Triggering the Outbound Process via Stand-Alone Programs:
Stand-Alone programs are started explicitly by a user to transmit data from one SAP system to another. Standard Programs for several master data objects exist in SAP. Ex. The material master data can be transferred using the RBDSEMAT program or transaction BD10.
The stand-alone programs provide a selection screen to specify the objects to be transferred and the receiving system. After the stand-alone program is executed, it calls the IDoc selection program with the specified parameters.
Triggering the Outbound Process via Change Pointers:
The change pointer technique is used to initiate the outbound process automatically when master data is created or changed.
A standard program, RBDMIDOC, is scheduled to run on a periodic basis to evaluate the change pointers for a message type and start the ALE process for distributing the master data to the appropriate destination. The RBDMIDOC program reads the table TBDME to determine the IDoc selection program for a message type.
Processing in the Application Layer:
The customer distribution model is consulted to make sure that a receiver has been defined for the message to be transmitted. If not, processing ends. If at least one receiver exists, the IDoc selection program reads the master data object from the database and creates a master IDoc from it. The master IDoc is stored in memory. The program then calls the ALE service layer by using the function module MASTER_IDOC_DISTRIBUTE, passing the master IDoc and the receiver information.
Processing in the ALE Interface Layer:
Processing in the ALE Layer consists of the following steps:
u2022 Receiver Determination: The determination of the receiver is done through Customer Distribution Model.
u2022 IDoc Filtering: if an IDoc filter is specified in the distribution model for a receiver, values in the filter are compared against the values in the IDoc data records. If a data record does not meet the filter criteria, it is dropped.
u2022 Segment Filtering: For each sender and receiver combination, a set of segments that are not required can be filtered out.
u2022 Field conversion: Field values in data records are converted by using the conversion rules specified for the segment.
u2022 Version change for segments: Segments are version-controlled. A new version of a segment always contains fields from the preceding version and fields added for the new version. Release in IDoc type field of the partner profile to determine the version of the segment to be generated.
u2022 Version change for IDocs: IDocs are also version controlled. The version is determined from the Basic Type field of the partner profile.
u2022 Communication IDocs generated: The final IDoc generated for a receiver after all the conversions and filtering operations is the communication IDoc. One master IDoc can have multiple communication IDocs depending on the number of receivers identified and the filter operations performed. IDoc gets the status record with a status code of 01 (IDoc Created).
u2022 Syntax check performed: IDoc goes through a syntax check and data integrity validation. If errors found the IDoc get the status of 26 (error during syntax check of IDoc u2013 Outbound). If no errors found the IDoc gets the status 30 (IDoc ready for dispatch u2013 ALE Service).
u2022 IDoc dispatched to the communication Layer: In the ALE process, IDocs are dispatched using the asynchronous RFC method, which means that the sending system does not await for data to be received or processed on the destination system. After IDocs have been transferred to the communication layer, they get a status code 01 (Data Passed to Port OK).
Processing in the Communication Layer:
To dispatch an IDoc to a destination system, the system reads the port definition specified in the partner profile to determine the destination system, which is then used to read the RFC destination. The RFC destination contains communication settings to log o to the remote SAP system. The sending system calls the INBOUND_IDOC_PROCESS function module asynchronously on the destination system and passes the IDoc data via the memory buffers.
Inbound Process in IDocs:
An inbound process used IDoc structure, posting programs, filter objects, conversion rules, a partner profile, service programs, and configuration tables to post an application document from an IDoc.
Posting Program:
Posting programs, which are implemented as function modules, read data from an IDoc and create an application document from it. A posting program exists for each message. Each posting program is assigned a process code. A process code can point to a function module or a work flow. In the standard program process codes always point to a function module.
Ex. The posting program for message type MATMAS is IDOC_INPUT_MATMAS which has a process code MATM.
Workflow:
A workflow represents a sequence of customized steps to be carried out for a process. The workflow management system is used to model the sequence, identify information required to carry out the steps and identify the person responsible for the dialog steps.
Partner Profile;
A partner profile specifies the components used in an inbound process (partner number, message type, and process code), the mode in which IDocs are processed (batch versus immediate), and the person to be notified in case of errors.
Process flow for the Inbound process via a Function Module:
In this process, IDocs are received from another system and passed to the posting function module directly.
1. Processing in the communication Layer:
The IDOC_INBOUND_ASYCHRONOUS program, triggered as a result of an RFC from the sending system, acts as the entry point for all inbound ALE processes. The IDoc to be processed is passed as an input parameter. Control is transferred to the ALE/EDI layer.
2. Processing in the ALE/EDI Interface Layer:
u2022 Basic integrity check: A basic integrity check is performed on the control record.
u2022 Segment Filtering and conversion: Filtering out unwanted segments and carry out any required conversion of field values.
u2022 Creation of Application IDoc: The application IDoc is created and stored in the database and a syntax check is performed. If there are errors it gets status code of 60 (Error during Syntax check of IDoc u2013 Inbound). At this point a tangible IDoc, which can be monitored via one of the monitoring transactions, is created and the IDoc gets status code 50 (IDoc Added).
u2022 IDoc Marked ready for Dispatch: IDoc gets the status code 64 (IDoc ready to be passed to application).
u2022 IDoc is passed to the posting program: The partner profile table is read. If the value of the Processing field is set to Process Immediately, the IDoc is passed to the posting program immediately using the program RBDAPP01.
3. Processing in the Posting Module:
The process code in the partner profile points to a posting module for the specific message in the IDoc. The posting program implemented as a function module either calls a standard SAP transaction by using the Call Transaction command for posting the document or invokes a direct input function module.
The results of execution are passed back via the function moduleu2019s output parameters. If the posting is successful IDoc gets the status code 53 (Application Document Posted) or it gets status code 51 (Error: Application Document Not Posted).

Inbound iDoc for POS message WPUUMS problem

Hello all,
I encountered a strange thing with the inbound idoc for POS with the message WPUUMS.
I've created a new segment with we30 as an extension to the WPUUMS01 like this.
WPUUMS01
--E1WPU01
E1WPU02
ZNRLOT "this is my added segment
E1WPU03
E1WPU04
E1WPU05
E1WXX01
The idocs (external xml files) enter correctly in SAP, when I view them with WE02 al the segments are correctly populated with the right data and they are ready for processing with status 64.
After processing (with the program RBDAPP01 or with WE19 etc. doesn't matter, both uses IDOC_INPUT_POS_SALES_ACCOUNT ) comes the problem:
The Material Document and Billing Document (Invoice) ARE GENERATED WITH ONLY THE FIRST ITEM. I mean that the iDoc has more items(materials) and should generate the material document and billing document with all the items, not just with the first one.
As a conclusion:
1. iDoc is loaded correctly in SAP with all the data in the segments, also in the new segment, and of course has more items.
2. the problem is that after after processing, the generated document material and billing document have only 1 position, the first item from the iDoc.
Any help in fixing this issue will be welcomed.
Traian Mustata
SAP ABAP Consultant

check for the qualifier QUALARTNR. Is it filled accordingly in the z segment? U may also check by debugin the f/n module in we19

How to create the INBOUND Function Module for INBOUND IDOCs

Hi Friends,
Can any Suggest me How to proceed to Create an INBOUND Function Module for Processing the INBOUND IDOCS
which are recieved from XI Server ?
I am working in SAP-ISU
Here i will recieve the INBOUND IDOCs for the Meter Reading Orders.
We have a Standard INBOUND FUNCTION MODULE
IDOC_INPUT_ISU_MR_UPLOAD
which Uploads the Meter Reading Results.
I copied the Same function Module into ZIDOC_INPUT_
and working on it.
Can any one suggest me, whether i am going in correct way or not.
In IDOC_INPUT_ISU_MR_UPLOAD Inbound fun module,
BAPI_MTRREADDOC_UPLOAD is used to Update or Insert the Meter Reading Results,
My requirment is to Insert and Update the Meter Reading Orders which are Inbounded from XI.
Can I Use the Same BAPI
BAPI_MTRREADDOC_UPLOAD
to Update the below fields,
EABL-SERNR
EABL-ZWNUMMER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS
EABL-ADATTATS
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Kindly Suggest me,
Thanks in Advance,
Ganesh

Hello Ganesh
I think you are going completely astray with you z-function module for IDoc processing.
If you look at TABLES parameter METERREADINGRESULTS (type BAPIEABLU ) of BAPI_MTRREADDOC_UPLOAD you will find many of the requested fields already:
EABL-SERNR => BAPIEABLU-SERIALNO
EABL-ZWNUMMER =>REGISTER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS => ACTUALMRTIME
EABL-ADATTATS => ACTUALMRDATE
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Field EABL-ZMESSAGE appears to be custom field (at least I cannot find it on ECC 6.0). If this field was added using include CI_EABL then you probably can get these values into the BAPI using the EXTENSIONIN parameter.
Check routine CHECK_UPLOADRECORDS in the BAPI which allows two extension structures:
- BAPI_TE_EABL
- BAPI_TE_EOSB
Not surprisingly BAPI_TE_EABL contains the include CI_EABL.
Regards
Uwe

What is the standard inbound idoc for substation management?

Hello Experts,
Can anybody help me to find out the standard inbound idoc for substation management?
The following field are requied to be filled in idoc.
1)Power_Produced(STAGR)
2) Reduction_Power_Consumed(STAGR)
3)Ancillary_Power_Consumed (STAGR)
4)Unit (MEINB)
5) UOM and Date (BUDAT)
If possible please tell me the standard BAPI for these fileds.
Thanks in advance for your help.
Thanks and Regards,
Suresh.

Hi Debo,
What is your exact requirement?
Are you trying to find the standard configurations available for a webdynpro application? then, use t-code SE15 and open the application name and use the tree structure to find out the available configurations under WD application.
sample:
Regards,
Rama

Partner profile for INBOUND IDOC

Dear experts,
Need your help to define partner profile for inbound idoc to R/3 system. There is a third party (Non SAP) based application from which idocs need to be sent to the R/3 system. There is no need to send an outbound idoc from the R/3 system. Can some one please suggest what are the steps to be taken to b configure the partner profile in the R/3 system for the inbound idoc?
Thanks,
Priyanka

Hi
This is not the right location to post this question.
You got to post this query in Data transfers section of SDN ABAP Development forums
Now regarding your question,
You need to create a Logical System with the help of the transaction SALE.
Assign the created LS to the client with the help of same transaction
Go to WE20 and create the partner with the same Logical System name
Now..as you are recieving the Inbound Idoc from external Non-SAP System, you need to maintain the message type in the Inbound Parameters by clicking on ADD Icon over there.
Before doing the above step, you got to create the connection between SAP and Non-SAP System.
Use transaction SM59 to do this. Type of connection would be R/3 I guess
Thanks
Hope it helps.

Process code for inbound idoc's

hi friend,
i want to create a zprocess code for inbound idoc's pls i want to step or code.
regrads and thanks

Hi
Are you using the customised idoc i:e message type .I hope most of the data transfer techniques always has a standard message type and if you are using one such than you can check in transaction we42(inbound process code) .All the steps have been rightly been mentioned for this querry of yours if you can clearly explain as to what message type are you using and for what purpose i can send you with documentation with steps to you.At the end of the day you will be posting idocs so that the data is being reflected in the segments .The things to be noted down is :-
1.Maintain Partner Profile(we20) which is the sender system are you using ?
2.If the satus is 53 it is sucess(green ) else 64(being processed-yellow) or 51(error-red)
3.If you trigger by workflow than you have to use Message Variant .
If you are ok or incase do face any issues please do reply to the forum.
Regards
Somnath

EOIO should be enabled for Inbound IDocs to SAP

Hi All,
My Interface requirement:
i want to send my IDoC's to SAP ECC from SAP PI using IDoc Adapter in EOIO manner. so i have followed the below link.
http://help.sap.com/saphelp_nwpi71/helpdata/EN/96/791c42375d5033e10000000a155106/frameset.htm
1)I have have enabled EOIO in sender File adapter.
2)i have checked the Queue Processing in IDoC adapter.
assumed that IDocs are processing in EOIO manner. for proving the same, i have stopped the RFCUSER which is in ECC to process the IDOCs to SAP.
but still messages are stuck in Trfc queue, so i am thinking that EOIO is not enabled as messages are not stuck in SMQ1.
how to achive EOIO for inbound IDoCS??
Thank You,
Madhav

Hi
It's fine that messages are not stuck in smq2 on PI side. You set in smq1 system, connection and assing connetion pool numer and meesage is transfered to Ecc using common connection. On target Ecc check tcode WEINBQUEUE.
Br
Maciej

Inbound IDoc for WBS data

Hi,
WBS Master Data is stored on an external system (called PRISM).
I need an Inbound IDoc for update in SAP of WBS data sent by external system.
Thank you in advance.
Kieron Kelly

Hi,
Please check the IDOC type : if that doesnt suffice, go with a custom IDOC.
/ISDFPS/PS01
BUS2054001 is a business object that has many BAPI's for processing the WBS data. Check the method and click on ABAP tab for the BAPI/FM names.
Regards
Shiva

User exit for inbound idoc

could anyone please tell the user exit for inbound idoc : ACC_POSTING_GL01

I thnk the inbound idoc name is ACC_GL_POSTING01. User Exit for this is EXIT_SAPLACC4_001.
*****Reward points if useful
Regards,
Kiran Bobbala

Sample files for inbound IDOC's( EDI)

Hi All,
I am trying to get idoc's into system using EDI , wanted sample files for inbound idocs using EDI.
If someone could send the files please.
rgds
Ajay Sharma

HI,
Here one sample file.U need to change the sender/receiver ID's accordingly to the setup at ur EDI subsystem.This 850 i/b file will create an ORDERS idoc in SAP.
ISA³00³ ³00³ ³01³006906614GE ³01³040986076 ³060714³0640³U³00401³000012157³1³P³>~
GS³PO³006906614GE³040986076³20060714³0640³5008³X³004010~
ST³850³020700691~
BEG³00³NE³020700691³³20060714~
N1³BS³ABC PHOENIX DIVISION³11³RA0290837~
N1³SU³³11³II7930501~
PO1³1³12³EA³123.45³³ND³0469520260~
PO1³2³24³EA³190.23³³ND³0469520211~
CTT³2~
SE³8³020700691~
ST³850³057796284~
BEG³00³NE³057796284³³20060714~
N1³BS³ABC RALEIGH DIVISION³11³RA0289036~
N1³SU³³11³II7930501~
PO1³1³48³EA³61.72³³ND³0469520230~
PO1³2³12³EA³123.45³³ND³0469520260~
PO1³3³6³EA³190.23³³ND³0469520211~
CTT³3~
SE³9³057796284~
GE³2³5008~
IEA³1³000012157~
Also u can check in the system and find some ORDERS
idocs and u can retrigger that from WE19.
reward if helpfulll
ram

Inbound IDOC - for Orders Acknowledgement & Orders change Acknowledgement

Hi Gurus,
Using EDI 855 and 865 need to change delivery date and delivery quantity. The quantities must be equal to the original PO quantities.
PO quantity must be splitted to equal the original PO quantity and we need to post the acknowledgements in confirmations tab.
Can you please suggest
Basic type
Out put type
Message type and
process code
to be used to achieve this functionality.
Cheers
Karthik Rali

Hi Yeoh,
can you please suggest Customer exits related to 855 for Inbound processing,for handling
schedule quantity in - Delivery schedule tab.
we need to display the split quantity (Quantity of Goods Received (WEMNG)),
which should be equal to original po quantity (Scheduled Quantity (MENGE)).
with out effecting related condition types/pricing.
Can you please suggest related customer exits ,where i can handle the above functionality.
Cheers,
Karthik Rali

IS Retail:Report/Document generation for inbound IDOC for Cashier Statistic

Similar Messages

Maybe you are looking for