IS-Retails on ECC 6.0 with ehp4

HI,
I am looking to install IS-Retails on ECC 6.0 with ehp4
Can any one guide me exact location to find the component and also installation procedure.Thanks
Best Regards
Narendar

Hello,
Goto Service Market place and goto download page. Then click on Search for Installations and Upgrades under Installations and Upgrades.
In the search tab fill with EA-RET.
http://help.sap.com/saphelp_erp2005/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm
In the above link check under Logistics-general for more details for IS-Retail.
Regards,
Yoganand.V

Similar Messages

ECC 6.0 with EHP4 fresh Installation

Hello Gurus,
A fresh ECC 6.0 with EHP4 needs to be installed on Wnidows + Oracle Platform, please let me know which of the following path should be followed?
1. SAP NW 7.0 installation (without EHP1) --> EHP 1 installation --> EHP4 Installation
2. SAP NW 7.0 with EHP1 installation --> EHP4 installtion
3. SAP NW 7.0 installation --> EHP4 installation
The other way to ask this questions is what are the dependencies between NW7.0 (ECC 6), EHP1 and EHP4?
Please let me know which of the above options is feasible and recommended. Please let me know a better option if its not present in the above options.
Regards,
Saurabh.

Hi,
refer the following SAP note 1143022.
Regards
Manohar

Install ERP ECC 6.0 with EHP4 and JAVA stack (usage type)

Hi all,
I need to install ECC with EHP4 and also JAVA stack.
I know that I have to install 2 stacks with different SID and oracle homes, firts I have to install ABAP stack and then the JAVA stack, but wich usage type should I choose for JAVA STACK?
What I would like to have in my new installation would be the same usage type for JAVA stack like ERP 6.0 SR3 ABAP+JAVA stacks.
What should I choose?
Regards
Thanks

Hello,
SAP ECC 6.0 allows ABAP and JAVA but EHP4 this feature is not.
One thing I can suggest if you install ABAP stack first, it will initiates (even different SIDu2019s) the JAVA stack also.
So JAVA stack having a protection with ABAP, because you know JAVA stack is a very sensitive and time consuming one when you want to start are stop.
So you can do this sequence
Suresh

Upgrade SAP ECC 6.0 with SPS 12 to EHP4

Hi!
I would like to update a SAP ECC 6.0 system with EHP4.
I am on Windows 64 Bit with Oracle.
My current SP stack of SAP ECC 6.0 is 12.
The questions are:
Does the SPS 12 of SAP ECC 6.0 fullfil the requirements for the SAP EHP4-Upgrade?
If not what is the strategy to upgrade SAP ECC 6.0 system with SPS 12 to EHP4?
Any helpful information will be very appreciated!
Thank you!

Hi
You can check the below notes
Note 1143022 and 1134872 - Installation of SAP Enhancement Package 4 on SAP ERP 6.0
Regards
Uday

ERP6 with EHP4 and SP stacks

Hi
I have just installed SAP ERP6 SR1 EHP4 ready on a sandpit server as our project team want to start looking at the functionality on ERP6.0, we currently run ECC5.
I'm looking to patch the install to the latest levels, so I have downloaded EHP4 incl upto SP8 based on UT project team need, I've also seen there is SAP ERP 6.0 SP Stack upto SP18, I take it I need to patch the standard SAP ERP6 to SP18 independant of if I install EHP4? is there any order I need to patch EHP4 first or upto SP18 first? also, a kernel came down with EHP4, you normally get a kernel with the SP stacks, which kernel should I use?
Thanks for any advice, never used EHP's before.
Thanks.

Hi
ERP6.0 SR1 EHP4 ready install patch level is :
SAP_BASIS     701     0003     SAPKB70103     SAP Basis Component
SAP_ABA     701     0003     SAPKA70103     Cross-Application Component
PI_BASIS     701     0003     SAPK-70103INPIBASIS     Basis Plug-In
ST-PI     2008_1_700     0000     -     SAP Solution Tools Plug-In
SAP_BW     701     0003     SAPKW70103     SAP Business Warehouse
SAP_BS_FND     701     0002     SAPK-70102INSAPBSFND     SAP Business Suite Foundation
SAP_AP     700     0015     SAPKNA7015     SAP Application Platform
WEBCUIF     700     0002     SAPK-70002INWEBCUIF     SAP WEBCUIF 700
SAP_HR     600     0038     SAPKE60038     Human Resources
SAP_HRCAR     600     0038     SAPK-60038INSAPHRCAR     Sub component SAP_HRCAR of SAP_HR
SAP_HRCAT     600     0038     SAPK-60038INSAPHRCAT     Sub component SAP_HRCAT of SAP_HR
SAP_HRCAU     600     0038     SAPK-60038INSAPHRCAU     Sub component SAP_HRCAU of SAP_HR
SAP_HRCBE     600     0038     SAPK-60038INSAPHRCBE     Sub component SAP_HRCBE of SAP_HR
SAP_HRCBR     600     0038     SAPK-60038INSAPHRCBR     Sub component SAP_HRCBR of SAP_HR
SAP_HRCCA     600     0038     SAPK-60038INSAPHRCCA     Sub component SAP_HRCCA of SAP_HR
SAP_HRCCH     600     0038     SAPK-60038INSAPHRCCH     Sub component SAP_HRCCH of SAP_HR
SAP_HRCCN     600     0038     SAPK-60038INSAPHRCCN     Sub component SAP_HRCCN of SAP_HR
SAP_HRCDE     600     0038     SAPK-60038INSAPHRCDE     Sub component SAP_HRCDE of SAP_HR
SAP_HRCDK     600     0038     SAPK-60038INSAPHRCDK     Sub component SAP_HRCDK of SAP_HR
SAP_HRCES     600     0038     SAPK-60038INSAPHRCES     Sub component SAP_HRCES of SAP_HR
SAP_HRCFI     600     0038     SAPK-60038INSAPHRCFI     Sub component SAP_HRCFI of SAP_HR
SAP_HRCFR     600     0038     SAPK-60038INSAPHRCFR     Sub component SAP_HRCFR of SAP_HR
SAP_HRCGB     600     0038     SAPK-60038INSAPHRCGB     Sub component SAP_HRCGB of SAP_HR
SAP_HRCHK     600     0038     SAPK-60038INSAPHRCHK     Sub component SAP_HRCHK of SAP_HR
SAP_HRCID     600     0038     SAPK-60038INSAPHRCID     Sub component SAP_HRCID of SAP_HR
SAP_HRCIE     600     0038     SAPK-60038INSAPHRCIE     Sub component SAP_HRCIE of SAP_HR
SAP_HRCIN     600     0038     SAPK-60038INSAPHRCIN     Sub component SAP_HRCIN of SAP_HR
SAP_HRCIT     600     0038     SAPK-60038INSAPHRCIT     Sub component SAP_HRCIT of SAP_HR
SAP_HRCJP     600     0038     SAPK-60038INSAPHRCJP     Sub component SAP_HRCJP of SAP_HR
SAP_HRCKR     600     0038     SAPK-60038INSAPHRCKR     Sub component SAP_HRCKR of SAP_HR
SAP_HRCMX     600     0038     SAPK-60038INSAPHRCMX     Sub component SAP_HRCMX of SAP_HR
SAP_HRCMY     600     0038     SAPK-60038INSAPHRCMY     Sub component SAP_HRCMY of SAP_HR
SAP_HRCNL     600     0038     SAPK-60038INSAPHRCNL     Sub component SAP_HRCNL of SAP_HR
SAP_HRCNO     600     0038     SAPK-60038INSAPHRCNO     Sub component SAP_HRCNO of SAP_HR
SAP_HRCNZ     600     0038     SAPK-60038INSAPHRCNZ     Sub component SAP_HRCNZ of SAP_HR
SAP_HRCPH     600     0038     SAPK-60038INSAPHRCPH     Sub component SAP_HRCPH of SAP_HR
SAP_HRCPT     600     0038     SAPK-60038INSAPHRCPT     Sub component SAP_HRCPT of SAP_HR
SAP_HRCRU     600     0038     SAPK-60038INSAPHRCRU     Sub component SAP_HRCRU of SAP_HR
SAP_HRCSE     600     0038     SAPK-60038INSAPHRCSE     Sub component SAP_HRCSE of SAP_HR
SAP_HRCSG     600     0038     SAPK-60038INSAPHRCSG     Sub component SAP_HRCSG of SAP_HR
SAP_HRCTH     600     0038     SAPK-60038INSAPHRCTH     Sub component SAP_HRCTH of SAP_HR
SAP_HRCTW     600     0038     SAPK-60038INSAPHRCTW     Sub component SAP_HRCTW of SAP_HR
SAP_HRCUS     600     0038     SAPK-60038INSAPHRCUS     Sub component SAP_HRCUS of SAP_HR
SAP_HRCVE     600     0038     SAPK-60038INSAPHRCVE     Sub component SAP_HRCVE of SAP_HR
SAP_HRCZA     600     0038     SAPK-60038INSAPHRCZA     Sub component SAP_HRCZA of SAP_HR
SAP_HRGXX     600     0038     SAPK-60038INSAPHRGXX     Sub component SAP_HRGXX of SAP_HR
SAP_HRRXX     600     0038     SAPK-60038INSAPHRRXX     Sub component SAP_HRRXX of SAP_HR
SAP_APPL     600     0015     SAPKH60015     Logistics and Accounting
EA-IPPE     400     0015     SAPKGPID15     SAP iPPE
EA-HR     600     0038     SAPKGPHD38     SAP Enterprise Extension HR
EA-HRCAR     600     0038     SAPK-60038INEAHRCAR     Sub component EA-HRCAR of EA-HR
EA-HRCAT     600     0038     SAPK-60038INEAHRCAT     Sub component EA-HRCAT of EA-HR
EA-HRCAU     600     0038     SAPK-60038INEAHRCAU     Sub component EA-HRCAU of EA-HR
EA-HRCBE     600     0038     SAPK-60038INEAHRCBE     Sub component EA-HRCBE of EA-HR
EA-HRCBR     600     0038     SAPK-60038INEAHRCBR     Sub component EA-HRCBR of EA-HR
EA-HRCCA     600     0038     SAPK-60038INEAHRCCA     Sub component EA-HRCCA of EA-HR
EA-HRCCH     600     0038     SAPK-60038INEAHRCCH     Sub component EA-HRCCH of EA-HR
EA-HRCCN     600     0038     SAPK-60038INEAHRCCN     Sub component EA-HRCCN of EA-HR
EA-HRCDE     600     0038     SAPK-60038INEAHRCDE     Sub component EA-HRCDE of EA-HR
EA-HRCDK     600     0038     SAPK-60038INEAHRCDK     Sub component EA-HRCDK of EA-HR
EA-HRCES     600     0038     SAPK-60038INEAHRCES     Sub component EA-HRCES of EA-HR
EA-HRCFI     600     0038     SAPK-60038INEAHRCFI     Sub component EA-HRCFI of EA-HR
EA-HRCFR     600     0038     SAPK-60038INEAHRCFR     Sub component EA-HRCFR of EA-HR
EA-HRCGB     600     0038     SAPK-60038INEAHRCGB     Sub component EA-HRCGB of EA-HR
EA-HRCHK     600     0038     SAPK-60038INEAHRCHK     Sub component EA-HRCHK of EA-HR
EA-HRCID     600     0038     SAPK-60038INEAHRCID     Sub component EA-HRCID of EA-HR
EA-HRCIE     600     0038     SAPK-60038INEAHRCIE     Sub component EA-HRCIE of EA-HR
EA-HRCIN     600     0038     SAPK-60038INEAHRCIN     Sub component EA-HRCIN of EA-HR
EA-HRCIT     600     0038     SAPK-60038INEAHRCIT     Sub component EA-HRCIT of EA-HR
EA-HRCJP     600     0038     SAPK-60038INEAHRCJP     Sub component EA-HRCJP of EA-HR
EA-HRCKR     600     0038     SAPK-60038INEAHRCKR     Sub component EA-HRCKR of EA-HR
EA-HRCMX     600     0038     SAPK-60038INEAHRCMX     Sub component EA-HRCMX of EA-HR
EA-HRCMY     600     0038     SAPK-60038INEAHRCMY     Sub component EA-HRCMY of EA-HR
EA-HRCNL     600     0038     SAPK-60038INEAHRCNL     Sub component EA-HRCNL of EA-HR
EA-HRCNO     600     0038     SAPK-60038INEAHRCNO     Sub component EA-HRCNO of EA-HR
EA-HRCNZ     600     0038     SAPK-60038INEAHRCNZ     Sub component EA-HRCNZ of EA-HR
EA-HRCPH     600     0038     SAPK-60038INEAHRCPH     Sub component EA-HRCPH of EA-HR
EA-HRCPT     600     0038     SAPK-60038INEAHRCPT     Sub component EA-HRCPT of EA-HR
EA-HRCRU     600     0038     SAPK-60038INEAHRCRU     Sub component EA-HRCRU of EA-HR
EA-HRCSE     600     0038     SAPK-60038INEAHRCSE     Sub component EA-HRCSE of EA-HR
EA-HRCSG     600     0038     SAPK-60038INEAHRCSG     Sub component EA-HRCSG of EA-HR
EA-HRCTH     600     0038     SAPK-60038INEAHRCTH     Sub component EA-HRCTH of EA-HR
EA-HRCTW     600     0038     SAPK-60038INEAHRCTW     Sub component EA-HRCTW of EA-HR
EA-HRCUS     600     0038     SAPK-60038INEAHRCUS     Sub component EA-HRCUS of EA-HR
EA-HRCVE     600     0038     SAPK-60038INEAHRCVE     Sub component EA-HRCVE of EA-HR
EA-HRCZA     600     0038     SAPK-60038INEAHRCZA     Sub component EA-HRCZA of EA-HR
EA-HRGXX     600     0038     SAPK-60038INEAHRGXX     Sub component EA-HRGXX of EA-HR
EA-HRRXX     600     0038     SAPK-60038INEAHRRXX     Sub component EA-HRRXX of EA-HR
EA-GLTRADE     600     0015     SAPKGPGD15     SAP Enterprise Extension Global Trade
FINBASIS     600     0015     SAPK-60015INFINBASIS     Fin. Basis
EA-RETAIL     600     0015     SAPKGPRD15     SAP Enterprise Extension Retail
EA-PS     600     0015     SAPKGPPD15     SAP Enterprise Extension Public Services
EA-FINSERV     600     0015     SAPKGPFD15     SAP Enterprise Extension Financial Services
EA-DFPS     600     0015     SAPKGPDD15     SAP Enterprise Extension Defense Forces & Public Security
EA-APPL     600     0015     SAPKGPAD15     SAP Enterprise Extension PLM, SCM, Financials
SEM-BW     600     0015     SAPKGS6015     SEM-BW: Strategic Enterprise Management
ECC-DIMP     600     0015     SAPK-60015INECCDIMP     DIMP
ERECRUIT     600     0015     SAPK-60015INERECRUIT     E-Recruiting
FI-CA     600     0015     SAPK-60015INFICA     FI-CA
FI-CAX     600     0015     SAPK-60015INFICAX     FI-CA Extended
INSURANCE     600     0015     SAPK-60015ININSURANC     SAP Insurance
IS-CWM     600     0015     SAPK-60015INISCWM     Industry Solution Catch Weight Management
IS-H     600     0017     SAPK-60017INISH     SAP Healthcare
IS-M     600     0015     SAPK-60015INISM     SAP MEDIA
IS-OIL     600     0015     SAPK-60015INISOIL     IS-OIL
IS-PS-CA     600     0015     SAPK-60015INISPSCA     IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT     600     0015     SAPK-60015INISUT     SAP Utilities/Telecommunication
LSOFE     600     0015     SAPK-60015INLSOFE     SAP Learning Solution Front-End
Kernel patch level is 32.
So based on this, should I just install the EHP4? with none of the standard patches that come with SP18 ?
Thanks.

Upgrading R / 3 4.7 system to ECC6.0 with EHP4 along with windows 2008

Hi All,
I am looking for your feedback about the plan for upgrading our Landscape to ECC 6. with EHP4 from R/34.7E.
Current Environment: R/3 4.7X110 with SQL 2000 in 32 bit windows 2003
Planning to upgrade to the level of : ECC6.0 with EHP4 64 bit windows 2008, SQL 2005 Database
Based on the previous experience in upgrade I have planned in the following ways.
Since my basis component is in the level of 63, its possible for me to restore the SQL 2000 database in SQL 2005 (Using System copy tool )
Step 1: Migration of OS / DB using system copy tool (R/3 4.7 with SQL 2005 in 64 bit Windows 2003 ), Then will leave the system for testing for some period and after the confirmation, planned to start the upgrade
Step 2: By meeting all the prerequisites, Planned to upgrade to ECC6.0 with EHP4 on the OS / DB upgraded system.
Step 3: Once the upgrade completed / With the confirmation from the functional and technical consultants, I planned to upgrade the windows 2003 to windows 2008 using system copy tool.
Note: I am not using SQL 2008 - Project decision.
The above mentioned plan is the only way(proper way) for doing such activities or is there any other way to shorten the project.
I should not ask the below question (Even after reading PAM and SAP note 1054740), But kindly regret me for asking this one, out of own curiosity, i am asking the below one.
1. Is there any possible to install SAP R / 3 4.7 in windows 2008 with 2005 (This will help me to shorten the project). I am completely aware that SAP wont support R/3 4.7 with windows 2008, if its not at all possible is there any other work around for me to shorten? Let me know your suggestions and thoughts
Your valuable inputs will help me to proceed further with the plans (I surfed the SDN and read master guides already) . I really want to make sure , the way which i am going is the right one.
Thanks and Regards
Vijay Kumar

Hi Jitendra,
Hope you should check the PAM again , Its supported for sure and also for upgrading to EHP4 - SQL 2005 is the Prerequiste.
Hi Abhi and Others,
Thanks for all your support.
I have successfully completed the project for my landscape and it was a great success too.
As you all said, since I had the hardware availability and time frame as well. Hence, I have tried both the possibilities.
Note :I would prefer and stick with the SAP proposed and supported way and even for my project I have followed the same. So I would recommend to stick with SAP supported one.
But for the own technical interest I have tried the other option as well which is not supported by SAP and also faced some typical issues as well / but solved on my own with some tricks and other activities. So, this option is also possible but highly risked one and of course(more importantly) which is not supported by SAP. So, i would recommend to go with the SAP recommended way.
Thanks for everyone and I am closing the thread
Regards
Vijay

Re: Upgrading ECC 6.0 to EHP4 on Linux 32 bit.

Hi gurus,
    Am new to SAP. Basis. i've started a project on "Test upgrade of PRD server ECC 6.0 to EHP4" I finished installtion of SAP ECC 6.0 and took backup from PRD server and restored it in my test server. now i've to through my upgradation phase.
           Now i configured in solution manager and started maintenance optimizer. Now my problem is wen i configured in maintenance optimizer for the first time, i choose in 2. select files phase i chose the following options.
    2. select files --> calculate files automatically-Recommended.
                           --> Enhancement package
2.1 choose stack---> i tick 'media' only.
2.3 stack dependent files----> its selected some files showing totally 623 files ready to be download in download basket.
but due to collapse in download manager i missed some files..so i started the maintenance optimiser again in a new transaction. but i can find its selected some files by default including 'media; option with other options also. in the next phases also it defaultly selected all the files required for upgradation. but this time i can see only 298 files ready for downloading.. i dono which one is correct one. shall i go the first transaction or he new transaction.. please help me guys..
Thanks and regards,
Santhosh Kumar.

Hi,
Better make new transaction and choose again otherwise if you will miss some file then you will get error in upgrade.
Thanks
Sunny

Error in Upgrading ECC 6.0 to EHP4

Hi sap gurus,
Am upgrading ECC 6.0 to EHP4. now am in configuration phase. in the EHP_INCLUSION phase am getting a error:
" Severe error(s) occured in phase PREP_EXTENSION/SUBMOD_EXTENSION_NEW/EHP_INCLUSION!
Last error code set: Stack inclusion failed: patch level 53 for component EA-HR is too low, destination level is already at 55"
Then i downloaded the required patches of patch level service pack 56-61 and continued, but getting the same error..after that i checked the current status of the server. its having EA-HR component till service pack 55. but when i checked the stack XML file, its showing only EA-HR component SP02 to SP53. i think this error is due to the mismatch in stack XML file. i dono what should i do for this. should i need to alter the stack XML file manually? Please help me guys. my upgradation is hanging. please help me guys.
Thanks and regards,
Santhosh Kumar.

it is fine to assume that the stack file is mismatched with the system as the file suggested the ehpi to patch until level 53 but the original system already up to 55. if you are set on editing the xml file and this is not for production, you could try to remove the HR part entirely, just use find and try to remove all of that content that related to HR, be careful with the tag. just delete <software-component> until </software-component> for the HR part, remember to backup original file. it will avoid the error. Since the xml suggested 53 and the system already at 55 and assuming all other components correctly defined in the stack, i think it is fine to continue, and if i'm not mistaken after calculation with stack file, ehpi will offer to add support package level manually, you can add HR level until 61 or just leave it at 55 and add manually with spam later.
if this is for production system, i think you should go with AC suggestion, just find whats wrong with solman and reinstall using the right xml file.
Edited by: Henry Hsu on Oct 26, 2010 4:40 AM
Edited by: Henry Hsu on Oct 26, 2010 4:54 AM

Patches apply on ECC 6 AND WITH AIX

Dear ALL,
I want to patches apply on ECC 6 AND WITH AIX. can me tell me the all the process step by step.
Rrgards,
Ashutosh

Hello,
Goto Service Market place and goto download page. Then click on Search for Installations and Upgrades under Installations and Upgrades.
In the search tab fill with EA-RET.
http://help.sap.com/saphelp_erp2005/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm
In the above link check under Logistics-general for more details for IS-Retail.
Regards,
Yoganand.V

How to activate the IS-Retail in ECC 6.0 R/3 system

Dear Guru's...........
Can any one tell me how to activate the IS-Retail in ECC 6.0 R/3 system.
I have IDES system in my home I donu2019t know how to activate retail settings.
Please suggest me how to do that.
Regards
dnr

Dear DNR,
SPRO --> IMG --> Activate SAP ECC Extensions (Or, T. Code: SFW5)
Go to Tab: Industry Business Function
Select Business Function Set: ISR_RETAIL - SAP Retail
A new line will be appeared below.
Current Status will be OFF. Click within Field: Current Status. It will pop-up a list. Select "X - ON".
Important: I've read somewhere - Once Activated, cannot Roll-back.
Best Regards,
Amit
Note: For more, go to - http://help.sap.com
Follow the menu tree: SAP for Industries/SAP for Retail
Click on the link for "SAP industry Specific Components"
Choose the document "Business Function Set Retail"
Also,
Check https://websmp103.sap-ag.de/erp-upgrade --> mySAP ERP 2005: Updated upgrade FAQs, there you will find the list of Industry solutions which are supported by mySAP ERP.
https://websmp103.sap-ag.de/~sapidb/011000358700006168472006/
You must this thread in to [Forum: SAP Enhancement Packages|/community [original link is broken]; OR [Forum: Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP); as Nowhere, it is related to SAP SD.

Activation of IS - Retail in ECC 6.0

Hi Sap Gurus
Can any one explain me how to activate IS - Retail in ECC 6.0. I had already changed the option in to ON mode IS - Retail in T.Code SFW5. But the status is still showing Inactive.Is any patch required for this to get activated
regards
Mohan

Hi
Go to SFW5
In the that you will find the business function set :select IS retails over there.and check the componet you need
Then on the top you will find System settings---->Activate
Now click on the activate button and run the job in the background .
Rgs
Haynes

Is SAP BI reporting is possible in ECC 6.0 with same client

Hi all,
                         My requirement is, we need to design SAP BI data flow in ECC 6.0 with same client only. Now I am designing the BI data models as per the requirement of SD sales reports in ECC 6.0.For this, when i was extracting the data from SD datasource(2lis_11_vahdr) in RSA3 its showing 0 records,actually as per VA01 some records are available but its not showing in the RSA3.
                          My doubt is , is it possible to extract the data from ECC 6.0 and load the data to the datatargets and get the SAP BI reports in ECC6.0 with the same client.
                          Please suggest as soon as possible.
Thanks

It is possible to load the data from the same client. It all depends on the source system and the client which has been connected in the RFC connection.
Let me know if this helps.
Regards,
Avinash

Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query

Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
        INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
        FROM COSP CLIENT SPECIFIED
        WHERE GJAHR IN SELR_GJAHR
          AND KSTAR IN SELR_KSTAR
          AND LEDNR EQ '00'
          AND OBJNR IN SELR_OBJNR
          AND PERBL IN SELR_PERBL
          AND VERSN IN SELR_VERSN
          AND WRTTP IN SELR_WRTTP
          AND MANDT IN MANDTTAB
        GROUP BY (GROUP_LIST).
   LOOP AT I_COSP      .
     COSP                           = I_COSP      .
     PERFORM PCOSP       USING I_COSP-_COUNTER.
     CLEAR: $RWTAB, COSP                          .
     CLEAR CCR1S                         .
   ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.

Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
                   endselect.
   SELECT
into table
   for all entries in table
where.
   use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
    e.g in your case
          sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya

What are the major differences b/w R/3 4.7 and ECC 6.0 with SAP BW/BI

Hi,
Any one can give an idea about the conversions from SAP R/3 to ECC 6.0 with respective of SAP BI/BW.
what are the major differences loading the data,delta methods,enhancements,lo's,FI-SL,CO-PA etc.....
if any one have documents and links please can you share it is very usefull for my client.
with out knowing i don't want to go forward,i don't misguide my client.
actually i am working as sap bw/bi consultant,my client is going to upgrade the R/3 4.7 to ECC6.0 and BW 3.5 to BI 7.0.can you help me or guide me .
Thanks in advance.
SAP Member......

Check
http://service.sap.com/releasenotes
http://erp.fmpmedia.com/
Markus

Crystal Report against ECC 6.0 with SSO configured

I created a simple report against the ECC 6.0 Article table and saved it to InfoView. I can run the report fine, but when others run it they get an error stating the logon parameters are incomplete. We are in the process of configuring single sign on and have created other Crystal Reports going against ECC 6.0 with Business Views where SSO turned on in the data connection. Everyone can refresh those reports with no problems. Is their some report setting that needs to be set for Crystal Reports using a data source directly against ECC 6.0 tables?

We have multiple reasons for implementing SNC.
The main reason we have enabled SNC is to simply the users experience while working in the SAP environment. We are going live this month with Plant Maintenance, SRM, Project System, General Ledge and Asset Management reporting cubes in our BW environment as well as in our ECC 6.0 environment. We have set up SAP Portal and have created iviews to BOBJ folders and reports. Users are authenticated once by logging on to the Lan. Once logged on we would like them to seemlessly run SAP transactions and Business Objects reports through the SAP Portal based on their job function. Each user has security setup in BOBJ and SAP to allow access to transactions and reports appropriate for their job function.
We have three types of SAP reports and data connectors.
- One set of Crystal reports go against ECC 6.0 through Business Views with a Data Connection set up for SSO.
- One set of WEBI reports goes against BW queries though Universe Connections set up for SSO.
- One set of Crystal reports go directly against ECC 6.0 tables.
We currently have two issues:
1) The Crystal reports going directly against ECC 6.0 tables are returning the error
Error - The database logon information for this report is either incomplete or incorrect.
2) When we send a link to any report using OpenDocument if the user is not logged on to InfoView they get a rather long error message:
Account Information not recognized: Active Directory Authentication failed to log you on. Please contact your system admin....
Our hardware and server setup is a load balancer connected to a cluster of two Tomcat servers connected to two BOBJ servers.

IS-Retails on ECC 6.0 with ehp4

Similar Messages

Maybe you are looking for