Is RF can receipt SAPGui if used SAPConsole and telnet

Dear all, can you tell me that a RF terminal with winCE operation system can show GUI if can receipt SAPGui if used SAPConsole and telnet. if not, how should i do(it means which server like telnet should instead)?

Hi,
In WM, if you are using SAP Console, it is recommended to use Telnet Server as an interface between the RF terminals and SAP, there are other third party interfaces available in the market.
Reward if it helps you.
Thanks
Aktar

Similar Messages

So my I phone 4s volume has decided to pack allowing only my phone to make sounds when I have an incoming call, I can also here fine using facetime and receiving calls. YouTube, soundcloud, any of I players will no longer play sound. I've restored the ph

So my I phone 4s volume has decided to pack allowing only my phone to make sounds when I have an incoming call, I can also here fine using facetime and receiving calls. YouTube, soundcloud, any of I players will no longer play sound. I've restored the phone using iTunes on my laptop and checked all the volumes are turned up and the button at the left hand Side of the phone is in the correct position.

Try inserting and re-inserting your headphones 7 or 8 times. Also try cleaning out the headphone jack in case of debris that might be interfering with the connection/disconnection.

Re user tip: How can I import a homemade DVD into iMovie for editing? - I've followed instructions so far so good, until I get to "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?

Re AppleMan 1958 excellent user tip: How can I import a homemade DVD into iMovie for editing? -
I've followed instructions with success until "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?
I installed MGEG Streamclip 193b8 and used their utility to install quicktimempeg2 and got a message stating it was successfully installed. (I'm on latest Maverick 10.9.2 on iMac) Then I dragged the VIDEO_TS file from my home DVD into the streamclip app. It asked which of 4 files to use, and I selected the first one. Streamclip played the video with the sound. so far so good. but now I cannot figure how to use quicktime player 10.3 to export this vob file out of streamclip.

Thank you for your quick reply and for clearing up my confusion. I'm exporting the first section now. I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie. I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame? If it can, what size should I select when I export?

Can you explain when using keywords and addding them to various clips pressing ctrl and a number eg. 1 or 2 it simply closes down FCPX. Just to the dock as would th yellow -sign. As you gather I am new to this program having only used Final Cut Express 4

Can you explain when using keywords and addding them to various clips pressing ctrl and a number eg. 1 or 2 it simply closes down FCPX. Just to the dock as would the yellow -sign. I am new to this program having only used Final Cut Express 4 previously.
iMac (early 2009) 24in 2.93GHz 4GB 1066MHz DDR3 SDRAM (To be upgraded ot 8GB in the nextfew days) os x 10.7.2 Lion
Re: Why don't my arrows on the time line operate and allow me to move to the start and end of the timeline. Iam using the trial version

Check System Preferences. I think Control-1 is used by something in the OS now. Switch it off. It's a major p[ain the way the OS is taking over more and more of the keyboard, allowing less options for application use.

Have a old macbook 2006 with newer 500 GB seagate Momentus hard drive. I took mac to apple store and they said logic board is bad. Can I purcase another used macbook and install my old seagate hard drive and have saved my information? Thanks for any imput

Have a old macbook 2006 with newer 500 GB seagate Momentus hard drive. I did not backup any docs or pictures. The macbook crashed my fault. I took mac to apple store and they said logic board is bad. Can I purcase another used macbook and install my old seagate hard drive and have saved all my information? Thanks for any imput.

mgott55 wrote:
Can I install my used existing hard drive in a compatible macbook to save everything?
If you need to extract the drive's content you can remove it and install it in a $10 USB enclosure. It will be readable by any recent Mac.

We can't create form using dblink and synonim

We have created a dblink pointing to a table in the remote database.
When we create a form based on table or view using this dblink, we get the error "page not found".
We read from
Re: I can't create form using dblink
that we must create a synonim, and this was done creating one in the same schema of the db-link using the "Database Objects" of oracle portal 10g (external db is an oracle 9.0.2).
The new synonim work (tested with reports and pl/sql page)
but if we click on "Grant Access" (of the synonim) we get the following error :
Error: The underlying object of the synonym does not exist, is a remote object or is not of type function, procedure, package, sequence, synonym, table or view. (WWV-17076)
Does form work only with table and view of the portal database (not external one)? or have we loose something in the creation of the synonim?
Have someone succesfully created a form based on a db-link towards an external database?
Thanks to all.

Hei guys, has nobody created succesfully a data-driven forms based on a dblink towards an external database?
I can't believe this!!!!

Can't print remotely using foxfire and can on internet explorer is norton security blocking foxfire

when i try to print on hp printer, won't print. it prints using internet explorer. is it because i have norton security and foxfire is blocking it?

Hi,
Like Rob said, please ask this problem in MSDN forum for more professional help:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=windowsaccessibilityandautomation
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Karen Hu
TechNet Community Support

I don't have a data plan. Can I buy a used smartphone and transfer my current plan to it? I only want to use WIFI.

Looking at getting a used iPhone so I can use it in WIFI spots but I don't want to pay for data. Wondering if I can do it without it costing me anything.

there is many ways you can do this . but as Tidbits stated ,, if you were to switch from what ever phone you are using to a smart phone like the iPhone.. you will be paying for the phone service.. and additional amount because it is a smartphone.. then there is a data plan... so .. it will have all the features you are looking at using the phone to obtain the services from a wifi or hot spot.. .. than the USED iphone you are referring to MUST be one that belong to Verizon ( the last time I look you can only program a phone,,new or used that was originally theirs)... have you considered looking into getting a USB modem?? they are listed above under your acct My Verizon..SHOP... PHONE & DEVICES .... INTERNET ... .. unfortunately.. all smartphones that are activated will be programmed with all features ..at least with Verizon.. and most of the larger carriers..
hope that helps with any additional questions.. you may have.. if not ..let us know and we will make sure..all is covered for you ..

I have an iphone 4 contract that's up in july 2013, but my iphone is broken...can i buy a used phone and activate it?

I'm not under warranty, insurance or anything like that. The reps at the store when I bought my phone were not very clear about really anything with me and I'm just not sure if the contract is ONLY for iphones..? I was thinking of getting a Samsung or HTC and it would suck if I bought it and they wouldn't let me activate it on my contract. Sorry if this has already been answered, I've been searching and found nothing so far. Any help is greatly appreciated.

You can add insurance sometimes open entitlement is in march. How is it broken sometimes tech can do an exception. If its a warranty things there might be a slim chance.

How can I archive little used contacts and then reuse?

I have about 400 or so contacts in Address Book, some of them I want to keep but as they are related to old projects I've worked on I don't want them in my active Address Book (which syncs to my phone).
What is the best way/what are the alternative ways of doing this?
Ideally I want my 'live contacts' in address Book and Phone but my other contacts saved somewhere easily accessible as sometimes I will need to pull them into my 'live contacts again for a while.
Solutions much appreciated
(I'm running Tiger on my iMac and Leopard on my PG, currently if that makes any difference}

do an archive, file>export>address book archive, and archive that Ab with a specific name, then when you need that archive, you can archive the "live contacts" with another archive name, and then import that first archive and so on and so forth...
hope this helps

Can't share screen using messages and ichat

when i connect i can see my buddy and he can see me, but when i attempt to share his screen i get a white box across my screen and i can see his cursor moving but that is all i see. I had him ask to share my screen, which we did and he could see my screen perfectly. He has an imac with lion and i have a macbook pro with mountain lion.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Can't Adjust Brightness Using F1 and F2 Keys

My MBP was having difficulties starting up today (stalling at the grey screen w/ the Apple symbol) so I ran Disk Utility to repair, and everything seemed to be fine.
But now all the pre-set function keys are working save the F1 and F2 keys. I've tried pressing the fn keys before, but I am still not able to adjust the brightness. I also tried resetting the PRAM, but that did no good either. Currently, all the other function keys are doing their pre-set commands -- I didn't change any of them. What can I do to get the F1 and F2 keys working again?
Thanks!

My guess is that something you've installed is playing havoc with your system. When you reinstalled Lion you probably didn't do a clean install, thus the problem continued. Try creating a new user, then work in that acoount for a while. If the problem stops, you know the problem exists in your user account only. If the problem continues, its system wide and will require a clean install and reinstallation of your software.

Canon HG10 -Can't tranfter footages using log and transfer

I'm trying to transfer from canon HG10.Log and transfer not reconising the videos.Any solution please.
GUna

Hello,
I have the Canon HG10 and use the Blackmagic's "Intensity" High Definition HDMI Card with Final Cut 5.1 HD I capture the video uncompressed through HDMI it works great here's the link
http://www.blackmagic-design.com/products/intensity/ working with Mac Pro Intel 3.0. running Leopard, have installed three internal hard drives raid them together to run uncompressed video for edit. Hope this helps they are working on updates for the card to work with other software.
Hope This Helps
Have a good day guys

My external hard drive for backup and Time Machine is full. I bought a new HD. Can I just begin using it, or must I transfer old BkUp and TM to the new HD?

My external hard drive for Back Up and Time Machine is full. I bought a new HD. Can I just begin using it and rely on the old HD for past Time Machine versions, or must I transfer the old Back Up and Time Machine files to the new HD?

It is your choice.
If you don't want to be able to far back into the time slots covered by the old disk then just start using the new disk.
If you want to retain the ability to go back into those time slots then copy it.
Allan

Can anybody recommend useful performance and tuning books. I plan to take the 12c perf tune beta on March 21st

Can anybody recommend any useful performance and tuning books.
I should probably limit my search to 11g or higher.
I am starting to prep for the 12c perf and tuning beta I have scheduled on March 21st.
Thanks Roger

Hi,
I will review your review.
I do see this Oracle 12c book at Amazon written over a year ago.
Its not a certificaiton book.
I also did take the course at Oracle for 11g performance and tuning.
Amazon book:
Oracle Database 12c Performance Tuning Recipes: A Problem solving approach.
Thanks Roger

Is RF can receipt SAPGui if used SAPConsole and telnet

Similar Messages

Maybe you are looking for