Is roaming in canada and global roaming activated already?
Hi
I have the $60 unlimited plan for each 30 days. We are planning to go to Canada and then for a cruise. I was curious if I need to activate the roaming for Canada and global (at sea: provider: cellular at sea) or it is already activated. I tried to do it online and it saying I am not the account manager.
Verizon Wireless Customer Support wrote:
Hi Ovaloffice - Sounds like you will be on an amazing trip! To confirm are you using prepaid or postpaid contract service? We can certainly discuss your roaming options once we get a better understanding of your account status.
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport
Hi YaleK_VZW,
Thank you for the reply, Yes it is prepaid and there is no contract the plan is $60 (unlimited talk and text and 2GB of 3G data in USA).
Thank you
Similar Messages
-
WAP321 ignore global radius active server ip address
Hello everyone,
I have few WAP321 with a radius server listening on 2 different IPs (one for each SSID).
I configured the global radius server with theses two IPs.
Then I created 2 wireless networks with WPA enterprise, global radius settings.
I selected global radius "active server ip address 1" for the first network and global radius "active server ip address 2" for the second but it does not work. After saving the 2 networks only connect to the first IP of the radius and the select field only display "active server ip address 1" for both networks.
Is it a bug ? or something I haven't understood ?
Using firmware 1.0.5.3.
Thank you.Hi flallart1
Personally I can't confirm this behavior as I have no WAP321 unit by hand. But I wanted to say something about your setup.
You've configured RADIUS server with two different IP's.
Each RADIUS IP provides different authentication rules - like different user database or different set of authorization rules.
You have added both RADIUS IPs inside Global RADIUS setting configuration.
And inside each SSID (Virtual Access Point) setting you kept "Use global RADIUS server settings" checked, but you have explicitly selected "Active Server" for that particular SSID for which is suited.
What "Active Server" means: Enables the administrative selection of the active RADIUS server, rather than having the WAP device attempt to contact each configured server in sequence and choose the first server that is up.
In reality this means that from existing pool of available RADIUS servers you can choose preferred server by your own. But in case that preferred RADIUS server is not reachable, another one will be used for that SSID. But this is not good behavior in your case - because once that situation happen and your WAP selected different IP for particular SSID, your authentication scheme will be completely different as second RADIUS IP provides different authentication/authorization rulebase. If that RADIUS IP change happen, all clients already connected to that SSID according rulebase of first RADIUS IP will be denied in few next minutes, because re-authentication will fail as now it will be done according rulebase of second RADIUS IP. Also new clients will not be able to connect which normally works for them.
In your case you should ignore global RADIUS settings and explicitly configure RADIUS IP inside each SSID (Virtual Access Point) - i.e. IP of RADIUS server which is only related to that SSID. In your scenario, there is no Backup RADIUS IP as both of them provides different authentication. -
Where to buy my iPhone 5 from? I will be living in Canada for a while after the next 6 months. And returning to the UK regularly so I want an unlocked iPhone so I can use a local sim in Canada and a local sim in the UK to keep roaming costs down. But which model?
Thank you for you help in advanceIf you buy an iPhone at the UK or Canadian Apple stores, it should work on the GSM frequencies in both countries. LTE will not work as the LTE channels are different in each country and each iPhone sold in each country is only compatible on LTE channels of that particular country. Other wise it should be fine.
Be aware that only the Apple store (retail or online) sells the unlocked iPhone in the UK. I think the situation is similar in Canada. (It is in the US). -
Anyone know how to reset my iphone vm password (so I can listen to my messages) while in Canada and not turning on cellular so I don't get charged for roaming? Verizon says its an iphone issue and Apple says to contact my carrier?! I don't want to pay for roaming and I am able to use my phone fine and also connect to wifi while at friend's houses etc.
It's not a Verizon reset - under General and phone there is a place to reset my password however I can't do it without cellular turned on.
-
I changed my data plan from 6g to 8g while my daughter who attends college outside of the US at Toronto Canada (and we have on a international calling and international data plan) was on spring break at her grandparents house here in the US. I made the change online since I had been waiting on the phone for over 10 minutes for a customer service rep to come available. Well when I made the change online since that seems to be the thing that Verizon wants it's customers to do and I didn't see all the different plans available and just did the upgrade to 8g. Next bill had over $900 in roaming charges on her phone line. I called the 1-800 number and waiting for a service rep and after 20 minutes of waiting and being put on hold was told it was the customers mistake and there was nothing they could do.Thanks for nothing. I called back after thinking about it and wondered why changing a data plan for the phones in the US would change a international call plan. Waiting over 10 minutes again between waiting for a service rep and hold for one to answer the call. Gave her all the information about it and she said she would call back. Well, 4 days later over the weekend she had nevered called back. So on the phone again for the third time and after 20 plus minutes again was told that when I did it online I click the plan that didn't include international call only the data plan. Explained that I never saw the difference in the plan packages so put on hold again and was told that they could credit $100 to my bill. Wow, thanks alot !!! We have been Verizon customers for probably atleast 12 years and this is how you treat your long term customers?
Verizon Wireless Customer Support wrote:
AHARDY454,
We definitely want to review options on what has happened. We are now connection, so you can hover over my username and send me a Direct Meesage so we can review your account information. We look forward to reviewing.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport
TonyG_VZW they can't exactly hover over your username unless you actually link it in your post. The generic username for all the reps just doesn't fly. -
Hi,
I am planning a trip to South Africa in Nov/Dec. I live in Winnipeg Canada and own an Ipad wi-fi cellular. I would like to know if it is easy once in South Africa to use my device the way it is (i.e. with its existing SIM card etc). Or do I need to acquire a different SIM card? Also in order not to pay a fortune for the service is it better to acquire if needed a SIM card only once there? Also if I need a different SIM card where does one go to get one in South Africa? I have never travelled anywhere other than across Canada with my ipad (I am a fairly recent owner of such a device) and could use some help as to the best way to be able to use my machine in South Africa safely efficiently and at a reasonable cost.
Any advice would be appreciated.
Thank youAlso in order not to pay a fortune for the service is it better to acquire if needed a SIM card only once there?
Check with your carrier about roaming charges. They are usually prohibitive. Best to get a local SIM. -
Hi, I will be traveling to Canada and USA.
(Meteor PAYG Samsung Trend Plus )
I am trying to find out if there is anything I need to do to make sure I can make and receive calls.
Looking at Meteor website I understand it should work but it says the same for Serbia where I was few weeks ago and I was not able to make calls.
ThanksHi mariusL
Send me on your number and PIN in a PM and I'll make sure you're set up for roaming.
Adam -
Using Ipad2 in Canada and Mexico
Does the unlocked 3g/wifi enable me to use it both Canada and Mexico. Which carriers would I need to contact and do they need to supply me with a special sim card?
You should be able to roam on local networks with either the AT&T model or the Verizon model in both countries. That may cost you an arm and a leg. Here in Mexico you can buy a local TelCel SIM card for MN$150, that should work with the AT&T model. There are instructions that you can find with a web search for how to cut the SIM card to micro-SIM size to use in your iPad 2.
http://www.touchuserguide.com/2010/04/05/how-to-make-your-own-ipad-micro-sim/
http://www.engadget.com/2010/05/06/how-to-create-your-own-micro-sim-card-using-a -chef-knife-and-som/
Dah•veed -
Equivalent of Global Interactive Activity in 11g
Hello,
Is there an equivalent of Global Interactive (not Global Creation) activity in OBPM 11g? What I intend to do is to be able to have certain stand alone activities in the workflow bounded independently to different taskflows (there taskflows are associated with the business process but not directly linked to it). E.g. Let's say I have a requirement that the 'Manager' role in the workflow should be able to assign the primary process participants to different Line of Businesses based on day to day needs. All I need is a UI to achieve this. But I am also trying to leverage BPM roles so that only 'Managers' are able to see this link in their workspace / worklist and able to access this UI. We have previously implemented this using 'Global Interactive' in 10g. All we did was to place the activity in a manager swimlane and associate a screenflow to it. Trying to understand what 11g has to offer for this requirements.
Thanks,
GauravOne of the things that helps end-users train themselves on a process is to present a picture of where a work item instance that they are working on is located in the process. This is commonly referred to as the “you are here” map. In Oracle BPM 10g, this is done like this:
1. Add a Global Interactive activity to an abstract role (role with a name).
2. Name this new Global activity “You are here”.
3. Click Runtime in the left pane and check the "Has instance access" (do not check the checkbox labeled “Use activity for instance presentation").
4. Click the OK button.
5. Right mouse click this new activity and select Main task from the popup.
6. Change the Implementation type to "Show Process Image".
7. Click OK.
8. Save the project and reload the project.
9. Start the WorkSpace again. Log out and relogin.
10. On the right side of the inbox, for an existing work item instance click the "Select action" dropdown.
11. Click the new "You are here" action.
12. Note the red flag above the activity where this work item instance is located in the process.
Hope this helps,
Dan -
Initiating Global creation activity by quering a database table.
Hi,
I want to start the BPM process using
a) Use a query result for the initial global creation activity. ( -- I have an catalogued object which returns 'docNo' and 'status' column values from a database query already.)
How do I do this piece wherein I call the automatic activity from the global creation activity.
I want the
b) User clicks on the Review Claim link to pull up the claim to approve the claim. -- secondary part ( use the docNo to pull up claim detail from the database and present in the form for approval)
So there are 2 parts, List the claims awaiting approval and then the individual approval.
How do I get the user to log into a BPM workspace ( login screen) and get a list of claims for approval.
Example:
doc1#, amount, <Approve ReportLink>
doc2#, amount, <Approve ReportLink>
doc3#, amount, <Approve ReportLink>
AngeloHi Angelo,
Looks like part of your thread was cut off. This is mostly to see if I might be able to fill in the blanks.
I'm guessing you are thinking about using a Global Creation activity to perhaps bring up a list of claims and that the row or rows returned from the database could each create a separate new work item instance. Did I get that right?
If that's correct, don't use a Global Creation. Instead use a Global Interactive to display the rows. For each row approved an new work item instance might then be created in the process for each one you approved. You'd use a Screenflow behind the Global Interactive. Inside the screenflow you'd have an automatic task to retrieve the rows from the database. This would then flow to a Interactive task inside the screenflow that has been assigned a BPM Object presentation to display the rows inside a Group. You'd then follow this with another automatic task that looks at the Group (array) of items selected in the UI and then programmatically create a work item instance for each one selected.
Hope this helps,
Dan -
Create Process via Global Automatic activity
Hi!
I´m trying to automatize some process, that can auto-execute one time at a day. For this, i'm thinking of use the global automatic activity, and I 've scheduled to execute (for testing) every minute. But this never happends
If the global has no bp.Method inside, obviusly, nothing happends. Hence, when i wrote this code:
logMessage "Se ha iniciado el proceso de consulta de calendario a las:" +'now'
using severity = INFO
ProcessInstance.create(processId : "/ConsultarCalendarioCompras", arguments : null, argumentsSetName : "")
how could i solve this?
ThanksHi,
Are you seeing your log INFO statement in the log file every minute? Assuming you are, I think all you're missing is a valid value for the third parameter. Try changing your logic to this:
ProcessInstance.create(processId : "/ConsultarCalendarioCompras",
arguments : null, argumentsSetName : "BeginIn")
. . .Once you get this working, take a look at this thread for information on how to pass in argument variables into the work item instance using the second parameter: Re: How to create Instace of another process from running process.
Hope this helps,
Dan -
Hi,
Could you please tell me how we can pass I/O arguments through PAPI WS/PAPI API to execute the Global Interactive activity, the main task defined for it is a Screenflow. Global Interactive activity is not having "Instance Access" check in the Properties option. We will then use these arguments inside the Screenflow for business process. As per my knowledge, for Screenflow mapping, we need to map "Value" with the appropiate arguments defined in the Screenflow argument mapping section. By default, "Value" shows predefined values.So, how we can map argument values coming from PAPI WS/PAPI API to this screenflow.
Thanks,
AbhishekOne of the things that helps end-users train themselves on a process is to present a picture of where a work item instance that they are working on is located in the process. This is commonly referred to as the “you are here” map. In Oracle BPM 10g, this is done like this:
1. Add a Global Interactive activity to an abstract role (role with a name).
2. Name this new Global activity “You are here”.
3. Click Runtime in the left pane and check the "Has instance access" (do not check the checkbox labeled “Use activity for instance presentation").
4. Click the OK button.
5. Right mouse click this new activity and select Main task from the popup.
6. Change the Implementation type to "Show Process Image".
7. Click OK.
8. Save the project and reload the project.
9. Start the WorkSpace again. Log out and relogin.
10. On the right side of the inbox, for an existing work item instance click the "Select action" dropdown.
11. Click the new "You are here" action.
12. Note the red flag above the activity where this work item instance is located in the process.
Hope this helps,
Dan -
Global Interactive activity link to be displayed only at instance end
Hi All,
I have a requirement where link in right hand side dropdown at instance level should be shown only when instance is completed. For this I am using one global interactive activity with 'has instance access' option checked and also 'read only' option checked. It is visible when instance is completed as well as when alive. I dont want the later part. Could anyone advice?
Regards,
Yasmin.Yasmin,
You need to persist your instance variables by inserting them into the database table. And then pull your compleled instances based a known parameter (let say a defined instance id that can be an oracle or sql row id).
Does this make sense to you?
Thanks
badam571
Edited by: badam571 on Apr 27, 2010 1:30 PM -
Trigger a Begin event running Global Automatic activity
Hi
I have a situation explained as follows:
The BPM Process flow would be triggered when a message comes into a JMS Queue.
I have configured the JMS Messaging Service as an external resource and used a Global Automatic Activity as an Automatic JMS Listener to listen on that queue.
Once the message is received on the queue, I want my actual process flow to be instantiated and activities following the begin activity to be executed.
In the Studio Reference document, it is mentioned that
You can trigger a Begin event running Global Automatic activity.
Can someone tell me the steps to trigger the Begin Event from Global Automatic Activity and create the process instance.
ThanksYou have to call this method
ProcessInstance.create(arguments : args, argumentsSetName : "BeginIn")
Args is Any[String] where you put you input arguments that you have in your begin activity and BeginIn is the set of arguments you have in the begin activity.
HTH -
Transfer value from global automatic activity in Aqualogic BPM Suite
Hi, I am new to Aqualogic BMP suite and stuck with the following problem :
In aqualogic bpm suite, if we are setting some values to some variables in a global automatic activity in a process how to get those values back in some other activities (say an Interactive activity) in the same process or how to assign the values to some instance variables in the Begin activity ??
We have a scenario where we are creating some process instances from the Global Automatic activity using the following :
args["name"] = abc
create ProcessInstance using parameters = args
Now how to get the value "abc" and assign this value to an instance variable in the Begin activity(/access the value "abc" in an interactive activity)within the same process.
Thanks,
Suman.Hi,
Let's say you have an Argument Set defined in your Begin activity called BeginIn. The arguments in this Argument Set can be "a", "b" and "c" of type String, Int and boolean accordingly.
If you want to use the ProcessInstance.create method, then you would need to have a PBL script like this one:
args[] = [ "a" : "SomeStringLiteral", "b" : 1234, "c" : true ];
ProcessInstance.create(processId : "/MyProcess", arguments : args, argumentsSetName : "BeginIn");
HTH,
eduardoc.
Maybe you are looking for
-
Field Cost Ctr is a required field for G/L account TEST 504004
Dear Sir I create Purchase order and I try to make GRN then the following error occured. Please help me. " Field Cost Ctr is a required field for G/L account TEST 504004 Message no. F5808 Diagnosis The value for field "Cost Ctr" in the interface to F
-
My computer has been shutting off auto mystically and when I go to log in, the screen goes to lines and I can't turn it on
-
ItemRenderer and DataGrid Problem
Hi guys. I'm on creating a small app that simply pulls information from an XML file, displays it in a DataGrid then allows the user to filter and search it. First things first though; I'll explain what I have so far then detail my problem. I get the
-
Oracle Redhat 6.4 - eth0: no IPv6 routers present
Dear Experts, I installed Oracle Redhat 6.4. But the network is not working. What is the secret to making it work? Analysis below. Thanks a lot! Use: file /usr/share/system-config-network/netconf_tui.py /usr/share/system-config-network/netconf_tui.py
-
Printer profiles for Canon i950
Hi, I am using Mac Pro, OSX 10.5.3, CS3, with a Canoni950 printer. In attempting to print CD labels using Avery Click N Build 3D software, I have also historically been unable to find the printer profile that is compatible with my set up. Even after