Is RoboHelp 9 compatible with Office 2013?

Is RoboHelp 9 compatible with Office 2013?

Not officially. If you want to import or link, then it will not work. However, if you only need to create printed documentation, then right click the print layout and select Properties. That way it will work. Obviously if you hit problems, Adobe will not support that but chances are you will be OK.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

  • Is Captivate 6 compatible with Office 2013?

    Is Captivate 6 compatible with Office 2013?

    Hello There,
    I am sorry for that but Captivate is not compatible with Office 2013.
    Please check the link for the compatibility between Captivate and Microsoft office: http://helpx.adobe.com/captivate/using/microsoft-powerpoint.html
    Hope this helps !
    Thanks and Regards
    Himanshu Satija

  • Adobe Acrobat X Compatible with Office 2013?

    I purchased Adobe Acrobat X in December 2014.  My computer died and now I have Office 2013?  I have downloaded Adobe Acrobat onto the new computer, but I cannot seem to get it to work?

    I don't know the seller you mentioned, but I have some general comments
    - Current selling price for Acrobat XI Standard is about twice that (US$)
    - Adobe stopped selling Acrobat X the day they started selling XI, which was in October 2012.
    - It is entirely legal to sell old stock if you happen to still have it
    - If it is represented as the latest version, that isn't good
    - Legal old stock can sometimes be found as a genuine bargain. But it is unlikely to have support for the latest software and hardware.
    - There are a lot of people selling dodgy copies of Acrobat. Some very convincing boxed product. Some at full price. Some with serial numbers that were issued to companies for internal use. All sorts of ways to scam.
    - Serial numbers that are sold without the right, tend to get blocked by Adobe and also might not work for an upgrade
    - If you contacted Adobe they might be able to offer a view on your serial number

  • Is LiveCycle ES4 compatable with Office 2013?

    My network was recently upgraded to Microsoft Office 2013 and I have a LiveCycle user that reports she can no longer import documents from Word.  She is still able to create a document from scratch though.  We have un-installed and re-installed both Office and LiveCycle on her machine.  She is the only LiveCycle user I have, so I am unable to tell if it's an issue with her machine or with Office 2013.  Are there any known compatablilty issue with LiveCycle ES4 and Word 2013?

    Hello There,
    I am sorry for that but Captivate is not compatible with Office 2013.
    Please check the link for the compatibility between Captivate and Microsoft office: http://helpx.adobe.com/captivate/using/microsoft-powerpoint.html
    Hope this helps !
    Thanks and Regards
    Himanshu Satija

  • Office 365 with Office 2013 MSI Language Pack on Windows 7 machine.

    Hello All,
    I have Office 2013 MSI Language Pack installed on Windows 7 machine. After deploying Office 365 using ODT, Lync is crashing.
    Is Office 2013 MSI Language Pack compatible with Office 365?
    Thanks in Advance !!

    Hi,
    Have you checked the log file? Does it record the error details there?
    So you only have the language pack on your computer, not the entire Office 2013 instance? Office 2013 MSI Language Pack doesn't work with Office 365. Try to remove the language pack then try again.
    Also, to plan a multi-language deployment of Click-to-Run-based Office installations, please refer to this article:
    http://technet.microsoft.com/en-us/library/dn186220(v=office.15).aspx 
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Is Outlook 2007 compatible with Office 365?

    Is Outlook 2007 compatible with Office 365? The Office 365 will be part of Windows 2012 Essentials.

    As of the time I am writing this, outlook 2007 still works (but I can personally attest that the experience isn't great.) By the time you read this, that can change and it may not work anymore. Microsoft only guarantees compatibility wothnoffoce
    products in mainstream support. So that is 2010 and 2013 (or 365 Pro Plus equivalents.) 2007 is only in extended support, so MS has no guarantees or obligation to maintain compatibility, and they *specifically* call out 2007 support in their supported client
    documentation.
    More info here:
    http://office.microsoft.com/en-us/office365-suite-help/office-365-system-requirements-HA102817357.aspx

  • HP Officejet 4500 Ethernet / Wifi Driver Problem (blank fields) with Office 2013

    Hi,
    I have an Officejet 4500 (Ethernet) and I have exactly the same problem as lots and lots of HP Printer owners!
    Everytime I try to print on Office 2013 + Win 8 64-bit, the Printer window comes with strange "Asiatic" symbols, and not the original language (Portuguese or English, I tried both). (Note: my father has exactly the same printer I have and he already had some problems also on Win 7 + Office 2010, then I deleted all HP drivers, installed again and it solved the problem)
    I already tried the menus you people talk about but in my model I do not have such options. I already installed everything again and again...and always the same problem! With another printer from another company I have no problems with the drivers on Office, so it must be from HP Drivers that do not get along with Office 2013!!! Please update them as soon as possible...

    Hello DaveZiffer,
    Welcome to the HP Forums.
    I see that you are having an issue since the installation of the Office program.
    Here is a link that will take you to the 4 updates that are available for your printer. 
    After doing the updates, if you are still having issues, please feel free to write me back and I will be happy to research this issue further.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Having issues with Myriad Pro Font with Office 2013 Products

    Have tried to install Myriad Pro Fonts manually on a windows 8 & 8.1 machine with office 2013 64 bit but it seems that the office products like work, excel do not pick up the right font even though its comes up as Myriad Pro in the font list.
    I have logged this Microsoft as well but still haven't had much luck. In Office 2010 it used to work fine as it a 32 bit product.
    Print Preview Word 2013
    You can see that when printed it brings the (C) from Page 2 to Page 1. Whereas in Word 2010 it is fine, it will print exactly what is shown above.
    Any assistance will be much appreciated.
    Thanks

    Unfortunately, there isn't anything much Adobe can do about this. It has nothing to do with what is in the Myriad Pro font itself, but probably has to do with improperly handling of OpenType CFF fonts.
    I myself have found a few bugs in Office 2013 in terms of OpenType CFF font handling, especially with regards to how Office 2013 saves PDF files (not when using the Acrobat “save as PDF” feature of Acrobat).
    Since this relates to print, you should also be aware that Office products do tend to reformat based on metrics at printer device resolution as opposed to screen device resolution and that such reformating often occurs if you compose with one printer selected and then select a different printer to actually print to. This particular problem in Office goes all the way back to the first version of Word.
              - Dov

  • Reboot before sysprep when I want to add an installation task with Office 2013

    Hi all,
    I want to buid a reference computer with a genuine Win7 wim file, correct drivers, uptodate patches, and usefull applications. So I use a “Build and Capture Task Sequence”. The new reference image captured, I can use it with WDS or a media
    to any computers, using a second and different “Build and Capture Task Sequence.”
    All things were right, I could add Acrobat Reader, Java and some others application, but it failed when I tried to add “Add Application Task” with Office 2013. I could import the software, I discovered the new panel to configure config.xml
    and mychoice.msp, but when I run the Tasq sequence, when it begin to sysprep the OS, a few time before the capture, the computer reboots. Sysprep does not run, and the image is not captured.
    I can add any software installation in the Tasq sequence but not one with Office 2013.
    What do you think about this issue?

    Hi,
    Some pieces of advice, since I have managed to create a Windows 7 WIM file with Office 2013 embedded without any problems:
    Build your reference image in a virtual machine, not on physical hardware, to prevent a gigantic driverstore with drivers for one or more models, and having to rebuild your image every single time you use a new model. This is not how MDT works, MDT works
    hardware agnostic, since it inject's drivers of hardware for each model before the WIM file is applied to your target computer.
    Do you really want to embed applications like Adobe Reader and Java in the image? They have a release every month. Do you want to (or is there room for) updating your image every single month? Put them in the deployment phase of your task sequence. This
    way these applications are left out the WIM file, but are installed after the WIM file is applied to your system. Yes this takes a little bit more time when deploying a machine, but that's time you'll save on not managing your WIM file every single month
    Check your
    log files, make sure your machine is not Domain Joined, since that is the biggest mistake people make when sysprepping a machine. And check
    Setuperr.log for any sysprep errors. Guaranteed it has noting to do with Office 2013
    Good luck!
    If this post is helpful please click "Mark for answer", thanks! Kind regards

  • Acrobat XI combine to PDF feature is not working with Office 2013 is there a compatibility issue?

    Tested with Office 2010 and it works fine
    Seems to only be the combine to PDF feature that doesn't work, done updates, tried combining a variety of documents still no joy

    There isn't any compatibility issue with Office 2013 and Combine should work with office 2013 same as it with 2010.
    Can you please tell us some more details so that we can investigate the problem which you are facing:
    1) Please update the exact Acrobat version you are using. This you can find out via "Help -> About Adobe Acrobat XI Pro.." Version should be something like 11.0.x. If it is not 11.0.7, then please update it to 11.0.7 and try again.
    2) Is this problem you faced recently (after some update - Acrobat or OS update) or it never used to work earlier for you?
    3) You mentioned that when combining, it convert first document only. Can you please let us know how many documents you are combining and what are those formats?
    4) Also please update about you environment as well. Is you Operating System and MS Office 32bit or 64bit?
    Thanks,
    Vishal

  • I have upgraded Acrobat Standard from version 8 through time until I am currently using version X, which doesn't work with Office 2013.  Can I upgrade to version Standard XI?

    Over the years I have upgraded Acrobat Standard from version 8 to currently working with version X.
    However, since getting a new laptop it doesn't work with Office 2013.
    Can I upgrade to Standard XI?

    Upgrade pricing now only applies to version 9 and X. So if you have a retail serial number for X, you should be able to upgrade. (Or consider subscription).

  • Visio 2007 launch problem with Office 2013 installed "Please wait while Windows configures Microsoft Visio..."

    Running under WIN7-64 bit with Office 2013.  Requests reinstall every time it is run. Tried uninstalling and reinstalling. No change. Office 2013 does not recognize that Visio 2007 is installed. Copy paste operations between Visio and Word 2013 don't
    work. Tried disabling sharepoint access for Visio 2007 and did a repair for Office 2013. No change.Tried various compatibility modes. No change. Ran Microsoft troubleshooter which verified there is a compatibility issue but provided no solution.
    Tried the following...
    Type the following command, and then press Enter:
    reg add HKCU\Software\Microsoft\Office\14.0\Visio\Options /v NoReReg /t REG_DWORD /d 1
    no change

    Hi,
    Based on the situation, I recommend you try to use locale administer account to login in the computer.
    Then we re-install Visio 2007, if you solve the issue,please let me know.
    Regards,
    George Zhao
    TechNet Community Support
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • ICloud doesn't work with Office 2013

    I have a Windows 7 Enterprise x64 machine with Office 2013 Pro Plus x64. iCloud installs fine, but when I try to enable "Mail, Contacts, Calendars, & Tasks with outlook" and hit Apply I get:
    Also in outlook I go to File -> Options -> Add-Ins and the iCloud add-ins do not work.
    I'm using the latest version of iCloud control panel for Windows version 2.0.
    P.S.: I get what the trolls of lesser intelligence will boast out: "It's not supported, sorry.. just wait"
    Well, I don't want to. I want to use Offcie 2013 and I want my iCloud on it, so I'm looking for some of the higher-intelligence folks to conjure up some sort of workaround. Because waiting for Apple to update iCloud to work on Office 2013, would probably be after the new version of Office is out.

    No workaround. At least, a safe workaround.
    The final version of Office 2013 was released on October 24th on TechNet and yes, we need to wait for Apple makes some fixes in iCloud for Windows.
    Some tests on Virtual machines showed me that upgrades from Office 2010 to Office 2013 can work, with some tricks, but the result was not trusted.
    E.F.

  • Trouble with Office 2013 and KMS activation.

    I have a KMS server running on Server 2008 R2 that was serving out activations for Windows 7 and Office 2010.  I ran the Office 2013 activation
    pack on the KMS server and now it also shows our KMS key for Office 15. I realize that I need a minimum of 5 in the count field in order for activations to happen.
    We use VMware VDI and I spun up a pool of 10 with Office 2013 installed on the master. Before creating the desktop clones, I rearmed the master and then shut it down, snapped it and created the desktop clones. I have logged onto most of the clones
    with a number of different user IDs and when I look at the KMS server it now shows that the count is 9 - so I would assume that my copies are being activated.  However, when I look at Office on the VDI clones or on my own personal computer that has 2013
    installed I see that the product still needs to be activated.  
    Yes we have the VL service record in DNS pointing to the right server - it's been there for ages taking care of Windows and Office 2010.  I did not have this issue with either of the other products and KMS.  I am at a loss as to what
    to do next.
    Thanx...

    check the client-side event logs for the SPP events (request/response), is the client (your pc for example), hitting the expected KMShost, and what response resulted?
    Also check the KMShost event logs, is the request from your pc arriving there, and what came in, and went back as a response?
    If you're not familiar with how to "decode" the events, check here:
    http://technet.microsoft.com/en-us/library/ee939272.aspx
    In case you have a "rogue" KMShost:
    http://blogs.technet.com/b/odsupport/archive/2011/11/14/how-to-discover-kms-hosts-via-a-dns-query-and-remove-them-if-need-be.aspx
    EDIT: PS, not that it matters for this question, but there is a dedicated forum for OFF2013:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=officesetupdeploy  :)
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Crystal report 8.5 export to csv and rtf format not working with office 2013

    Hi Experts,
    Crystal report version 8.5 hangs and eventually crash when i export my report to csv or rtf format on windows 7 with office 2013 installed, code is written in VB 6 although the same scenario is working with office 2010 installed.
    i debugged the code and found the application hangs at function Report.Export(False).
    below is the code snippet
           .PDFExportAllPages = True 'ePDFExportAllPages
           .PDFFirstPageNumber = ePDFFirstPageNumber
           .PDFLastPageNumber = ePDFLastPageNumber
           .RTFExportAllPages = True 'eRTFExportAllPages
           .RTFFirstPageNumber = eRTFFirstPageNumber
           .RTFLastPageNumber = eRTFLastPageNumber
           .UseReportDateFormat = eUseReportDateFormat
           .UseReportNumberFormat = eUseReportNumberFormat
           .UseReportNumberFormat = eUseReportNumberFormat
           .XMLAllowMultipleFiles = eXMLAllowMultipleFiles
           .XMLFileName = eXMLFileName
           Report.Export (False) ----Application hangs here and eventually crash
    Looking forward for your help, as it is very urgent
    Regards
    Mohit

    Hi Mohit
    CR 8.5, being about 15 years old, does not support Windows 7. I am surprised this works for you with MS Office 2010 and to be honest, I'd consider my self lucky there. The fact that is does not work with office 2013... well, like I said, lucky with Office 2010 and your luck ran out with Office 2013.
    Your option; rewrite the app in VS 2010 / 2012 / 2013 and use the CR Assemblies for VS .NET from SAP Crystal Reports, Developer Version for Visual Studio .NET. The CR Java SDK would be another option.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

Maybe you are looking for