Is RS480M2 support raid 1 for all 4 SATA drive?

I would like to check that RS480M2 support raid 1 for all 4 SATA hard drive or not? The configuration would be SATA1-SATA2 as first set of mirror drive and SATA3-SATA4 as second set of mirror drive. Is this motherboard support this kind of configuration that I need? (2 Sets of mirrors)

I have the same question?
Please Help.
Gireesh

Similar Messages

Do we have any third party FLEX component libraries to support accessibility feature for all the components(like: ViewStack, ToggleButtonBar, charts and etc..) ?

I am working on FLEX 4.6 SDK it provides 35 components with built in accessibility support. My Application contains some components which have no built in accessibility support but I need to provide accessibility support for those components too. I have gone through the Flex docs to customize the non accessible components to support accessibility feature, But the docs where not clear. To customize a single component I have to overwrite lot of code in SDK level.
and it takes lot of effort.
So, I would like to use FLEX component libraries which provides accessibility support for all the component.
Could you please guide me how can I provide accessibility support for other components with out putting more effort on it.
Thanks in advance...

There is already such thing in myfaces called "security context" [1]. You could find build of sandbox.jar [2]
[1] http://myfaces.apache.org/sandbox/securityContext.html
[2] http://people.apache.org/builds/myfaces/nightly/

RAW Support 3 Update LOCKED ALL My External Drives!

OK, Can't get Aperture 2.1.4 to open or create any Libraries since the RAW 3 Support and iLife 09 update yesterday (came in through Software Update).
Running a PowerMac G5 tower, OSX 10.5.8
The Update worked fine with iPhoto 8.1.1 and I can now open RAW files from my new Canon S90.
I have 8 external FW drives which are now all "Read Only" and the lock is Grayed Out.
Any ideas? Thanks!

Thanks for the response. I decided to try the Bob Timmons approach of shutting everything down for a half hour and then restarting the external drives and then 5 minutes later start the Mac.
This worked!
All of my FW drives now say "Read & Write" and all is back to normal.
However Aperture 2.1.4 still will not recognize CR2 (RAW files) OR JPEGs from the new Canon S90.
iPhoto8.1.1. sees both now.
Message was edited by: musicandlight

Does Satellite L855-10X supports an bay for a second HDD drive

Does L855-10X have one empty slot to add SSD disk, without removing actual HDD?

Im not L855 owner so I cannot say it for sure but from my experience such upgrade is not always possible
Here in the forum you could read some threads about similar themes and mostly this did not work.
The notebooks like Portege M400, M700, M750, Tecra M9,Tcera S1, Tecra S2, Tecra S3, Tecra S4, Tecra M1, M2 or M3 supports such select bay but never read about compatibility on Satellite unit.
So from my knowledge you would get an BIOS problem. The 2nd HDD would not be recognized or in worst case the notebook would not power On.

JSTL Expression Support For All Attributes

There are mentions of JSTL expression support for the
modelReference attribute within the specification (although I have found problems in the EA3 in this regard), but
but I did not find any mention of supporting the same for all
attributes. To me, this seems very important, especially for
attributes like "onClick" where I might want to do something special:
<c:foreach ...
<h:graphic_image modelReference="model.myImage" onClick="onDelete({status.index})"/>
</c:foreach>
In the case above, this would allow me to call a single javascript function that triggers a delete action based on the current index within a list based view.
There are many cases that I can think of that this would be incredibly useful.

maybe you have forgotten the $
onClick="onDelete(${status.index})"
or I've misunderstood something...

Raid card for FCAL V890

Hi,
We would like to know whether V890 FCAL HDD supports hardware raid. If there is no internal raid for the HDD's which card needs to be installed so that the server supports raid 5 for FCAL disks.

There isn't any such card. The disk sub system in the V890 is JBOD and all the HBA options are are juat HBAs. You can use Solaris Volume Managet to configure the disks.

Solutions for lots of hard drive space?

Yes, this is a repost from my thread in the getting started forum, but I figured that this board is more heavily populated, and perhaps some professional videographers visit here more frequently to help me out, so I'm posting my question here as well. Here I go:
Hello,
Next spring and summer, I plan to be shooting and editing weddings. The past weddings I've done, I use about 12 tapes. ~200mb/min x 60 mins x 12 tapes is about 144GB. That's about 3 weddings in a single 500GB hard drive (and I plan on doing about 20 in a year). Obviously, I'm going to need a LOT of hard drive space. I don't want to consider entirely deleting the media after finishing a project because it seems common that clients wish to change little bits of the video, so I want to keep them for a while longer.
Right now I have a 500GB HD in a firewire400 enclosure. I don't use the internal Mac HD for media.
What a photographer said that others wedding videographers do and suggested to me was to buy as many HD's needed for the year (approx. so I guess about 7 if 500GB), set a deadline for those whiny clients for returns or re-edits and such, and at the end of the year, and reformat them all and reuse them for the next year.
I'm thinking of doing the same, but using the same enclosure for all my hard drives, just unplugging and plugging as needed.
I've heard of using a RAID system. I can't say I know much about using it but with what I'm using, I don't think it's an option? I am using a 17" 2.33ghz MacBook Pro with Final Cut Pro and I plan on getting an aluminum 24" iMac (probably 2.4ghz unless you can convince me otherwise) as a secondary editing machine, and perhaps to make the dreadful capturing process twice as fast.
So some of my questions are:
* can plugging and unplugging HD's to an external closure possibly damage the pins?
* would storing HD's that are not being used at the moment be safe in those plastic containers that usually come with a HD when you buy one? Or would it be damaging to keep one in there and store it away for a year?
* is this idea okay or would you suggest another method?
* slightly off-topic but sometimes I take my external hard drive, put it in my laptop bag, and do some editing at another location. I know it's supposed to be portable but someone told me that external hard drives aren't meant to be taken around like that. Is that true or am I okay? It's just sitting sideways in the bag while I walk/drive, it's not like I'm hiking a mountain and dropping my bag.
Thanks in advance for all your help.

321estrellas wrote:
- I wonder if enclosure manufacturers do special orders of JUST the enclosure without the cables and power adapter? Since I'll likely be buying the same one but plugging one at a time...(maybe one other for another computer)
Not sure if they will or not. Of course, IMO, it is not bad to have an extra Power Adapter and cables (or more), just in case. You would be suprised how things can get misplaced or when you really would like another FW or eSATA cable. You can call some of these places and ask, it nevers hurts. I have had very good experiences with Firewiredirect, OWC/MacSales and Wiebetech, probably worth a customer service IM window with them or call or email. Worst they can say it is not possible.
- Alternatively the Wiebtech SilverSata I enclosure seems pretty convenient and maybe I'll expand it with 6-8 additional trays...but again I may want to use another HD in another computer but I'm sure I can figure a way around that...
If you get a G5 or MacIntel they all use the same drives so if you remove it from a tray you can put it in the computer. I like the SilverSata I because it is relatively small and light and I will often throw a 750gig Drive into a tray when traveling to have a place to capture things and keep copies of photo downloads, audio files for Soundtrack and other files which take up room and a partition for a boot/repair/restore disk for the laptop.

Removing Time Machine backups for (missing) external hard drive

My Time Machine was backing up everything, including external hard drives.
One of the external drives (ORIGDRIVE) started hardware failures. I added a new external drive (NEWDRIVE) and used Finder to copy files over (some via RAID and some from the Time Machine copy a month before the problems cropped up).
Then I ejected and unplugged ORIGDRIVE and shipped it back to the manufacturer.
The problem is that the Time Machine still has all those copies from ORIGDRIVE eating up disk space, but I want to keep a year's worth of monthlies for all the other drives (just in case another drive fails soon).
Since ORIGDRIVE is not mounted, Time Machine doesn't show me those files so I can use the "Delete All Backups of" option within the GUI.
If I try renaming NEWDRIVE to ORIGDRIVE, what I get instead is ORIGDRIVE 1 .
We're talking dozens of TB here, so reformatting the Time Machine volume and starting over maxes out the system and leaves me flying without a complete backup for most of a week, something I'd rather avoid.
Suggestions?

My Time Machine was backing up everything, including external hard drives.
One of the external drives (ORIGDRIVE) started hardware failures. I added a new external drive (NEWDRIVE) and used Finder to copy files over (some via RAID and some from the Time Machine copy a month before the problems cropped up).
Then I ejected and unplugged ORIGDRIVE and shipped it back to the manufacturer.
The problem is that the Time Machine still has all those copies from ORIGDRIVE eating up disk space, but I want to keep a year's worth of monthlies for all the other drives (just in case another drive fails soon).
Since ORIGDRIVE is not mounted, Time Machine doesn't show me those files so I can use the "Delete All Backups of" option within the GUI.
If I try renaming NEWDRIVE to ORIGDRIVE, what I get instead is ORIGDRIVE 1 .
We're talking dozens of TB here, so reformatting the Time Machine volume and starting over maxes out the system and leaves me flying without a complete backup for most of a week, something I'd rather avoid.
Suggestions?

Enclosure for MacBook SATA drive

Do I need a special external drive enclosure for my MacBook drive? When I removed it, I noticed it doesn't have the pins where the drive is connected to the computer, but rather two thin, extended pieces that slide into the computer. My Macally enclosures were used with my older MacBook HD which had the pins (that were easily bent). I don't think my current enclosure will allow this drive to be used?
What enclosure would support this drive? It's a Hitachi drive that came with my MacBook (intel).

*"What enclosure would support this drive? "*
Any enclosure made for 2.5" SATA drives.

USELESS ONLINE HELP FACILITIES For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.

USELESS ONLINE HELP FACILITIES
For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.
Incident 1. Since many months attempts to download new and updated APPs produced a response – Apple ID Disabled. I had no time to consult an APPLE Store due to work in distant lands. When I finally visited yesterday I was told that as my IPAD has been reported as stolen, and APPLE in its wisdom had blocked its usage! I am not sure how they became so misinformed and nobody every advised me while with a few swift moves APPLE could have located me by email address or SKYPE.
Incident 2. Once the above anomaly had been fixed I tried to down load a newspaper and diligently input my address, credit card number and personal data. Repeatedly I was advised that my Credit Card was invalid and my postal code was incorrect! Really!
I was left to guess that having moved from UK to the US I should have advised APPLE! Not being told of this requirement brought about a second visit to APPLE Store in the same day to waste both mine and their time with a routine anomaly. How parochial in the context of a globalized world!
In each case I tried to resolve the issues using online access to a help line and by calling by phone at the numbers on the APPLE Website. In each of four separate occasions I diligently went through the routine and ended up with a message that thanked me for contacting Apple followed by a polite ‘Good Bye’!
In desperation I went to an Apple Store for the second time in a day as it is close to where I live when I am not working. On both occasions I was courteously attended to by Apple Staff.
However, my work is usually far away from the US and it is generally many thousands of miles to the nearest Apple Store therefore online help is viewed as imperative if one is to resolve issues away from home.
Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help? It would cost nothing in relative terms and might restore my high level of anti-APPLE sentiment that these two recent events have provoked.
Peter Hanney
Miami, Fl.

Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help?
If that is your question, the answer is at the bottom right of this web page. It is clearly marked "Contact Us" and is the best way, really the only way, to contact Apple.
If there were a publicly posted email address for concerns such as yours, it would be quickly filled with spam in about three minutes, thereby becoming instantly useless to you and everyone else. Apple would need to change it hourly, if not more often. That is also the reason you ought not to post your name, location, and what appears to be your iPad's serial number on this publicly viewable website.
Apple does not respond here and I can find no other questions for your fellow Apple users to answer.

I recently bought a lightning to 30 pin adapter for my new iPad so that I could continue to use my 30 pin to VGA cord, but when I plug the VGA cord into it it says it is not supported. They are all apple products, so why doesn't it work?

I recently bought a lightning to 30 pin adapter for my new iPad so that I could continue to use my 30 pin to VGA cord, but when I plug the VGA cord into it it says it is not supported. They are all apple products, so why doesn't it work?

If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

RAID / Storage Rebuild... requesting clarifications for all ;)

Hello All,
I'm replacing the 2 Seagate HDDs out of my home video editing system (CS5) that was previously configured as below, and think its a good time to get clarification on some items I never really resolved after many hours of research, to include where the different items should be installed/stored on a six-HDD system, and/or whether someone in my situation should completely re-think the system setup.
It was in the following configuration not out of original intention, but due to adding HDDs over time...
Intel RST/Matrix RAID via ASUS P6T Deluxe V2....
2 x 1TB Seagate HDDs w/ 3 Partitions
C: OS & Critical Programs in 100GB Matrix Raid1 Partition,
D: Saved Adobe Project Files, etc. in 250GB RAID0 Parition
E: Rendered Outputs, etc. in remaining GBs RAID0 Partition
2 x 1TB Samsung Spinpoint F3
F: Scratch files on 2GB RAID0
2 x 1TB Samsung Spinpoint F3
G: Original Video / Media Storage on 2GB RAID0
System Hardware:
Asus P6T Deluxe V2
i7 980
2 x 1TB Seagate 7200 HDDs (changing to something else)
4 x 1TB Samsung Spinpoint F3 7200 HDDs
1 x Asus GTX570 Direct CU II (exchanging for a 2-slot card, as this 3-slot won't snap secure due to sata port locations, etc)
1 x GTX275 for additional video out (haven't actually tried 3 monitors yet)
24GB Corsair Vengeance RAM
900w power supply
Cooler Master HAF Case
Various external HDDs for periodic backup via eSATA
Was Vista, ordering Windows 7 Pro
1) Assuming the hardware remains 6 x 7200RPM HDDs on a P6T Deluxe V2 (sort of want to stay on it, since just got an expensive lga1366 cpu), which only has 6 SATA ports available...
a) Am I even correct that the best editing configuration for six HDDs is 3 x RAID0 arrays?
b) If so, how should I distribute the following items across the 3 arrays - OS, Programs, Adobe Projects, Scratch, Outputs, Original Media? I could never figure out from forums which items are the most important to separate from each other on different discs.
2) Or should I really be modifying the system to allow more than the 6 HDDs at this point?
a) Now for the really nebulous question... if I need to change, should this be an internal RAID controller card with more ports, or does it need to be an external setup?
If I really need expanded equipment, I'm ok with things like buying "faster" HDDs (10k or whatever) to replace the 2 Seagates if that's a strong recommendation, spending a bit on better RAID equipment if it is actually worthwhile, but...
1. Can't spend a thousand to only slightly improve it
2. Need a setup that someone of moderate computer skill and experience can setup and maintain.
In particular, the question of how to distribute the various items/ tasks across existing discs is likely of interest to many readers. This is talked about a lot, but I'm really unclear on how best to distribute them and in what priority if you don't have separate arrays for every item/task.
Thanks to anyone interested!
P.S. NOTE to other amateurs w/ my RAID setup... trying to install a large graphics card and somehow resetting the BIOS in the process is what spurred my current possible re-build. Didn't realize it had reset, continued startup to find Intel RST not functioning, drives renamed and of course RAID0s inaccessible. Then changing back to RAID setup in BIOS not effective at that point. Since I have important stuff backed up and wanted to change out some drives anyway, not worth trying to restore the RAID and recover, but you might end up in worse shape. SUPPOSEDLY if you change the setting back to RAID before OS startup, your arrays and Intel RST will function normally even after the bios reset.

I swear you are a benevolent jaguar, always lurking and ready to pounce at a moment's notice!
Information received and agreed. That's exactly the simple breakdown I've needed to know for years. I assume the 1TB on C: & F: is not a mandate, but based on already having 1TB HDDs on-hand (and also assuming it should be large enough to keep the disc usage % low)?
Unless I'm advised otherwise, I suppose I'll just get the "fastest" large capacity non-ssd HDD's I can (maybe velociraptor 600gb?) for the non-RAID single discs then (C: & F: drives), since I want to replace the two seagate HDDs anyway. I guess both seek/read time and not just throughput/write stats are relevant for the C: OS drive, if not so much for the export F: drive. For that matter, guess I could just SSD the C: drive, and Velociraptor (or something with more capacity) the F: drive.
Many Thanks!
P.S.: Assumed the matrix partition wasn't a good idea... a hold-over from when I only had 2HDDs and was guessing my way along.

Cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

Have you done any of the following?
http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
Repaired permissions & restarted your comp after the installations of the drivers?
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
What to do when you can't print
=============
not working with OS X yosemite 10.10.1
Per your profile
Mac OS X (10.7.3)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

Adobe Brings Retina Display Support To Photoshop And Illustrator CS6 As A Free Update For All Users

Adobe Brings Retina Display Support To Photoshop And Illustrator CS6
As A Free Update For All Users..... if this is TRUE then how Do I get it. My CS is HORRIBLE visually. Does ANYONE know anything encouraging about this issue with Adobe CS and Retina Display???

As pointed out by John T Smith, you should post the questions in the correct forums to get swift replies. However, yes Adobe has made its promise good and the blog to that effect is here:
<http://blogs.adobe.com/jkost/2013/01/retina-display-support-and-photoshop-cs6.html>
Good luck.

[svn:fx-trunk] 13366: Ensuring that AFEFontManager, if it is available, overrides the lookup for embedded fonts for all supported font types, including TTF, when embedding legacy DefineFont3 fonts.

Revision: 13366
Revision: 13366
Author:   [email protected]
Date:     2010-01-07 22:15:50 -0800 (Thu, 07 Jan 2010)
Log Message:
Ensuring that AFEFontManager, if it is available, overrides the lookup for embedded fonts for all supported font types, including TTF, when embedding legacy DefineFont3 fonts. BatikFontManager will remain a backup in the event that AFEFontManager is not found though BatikFontManager;s support is limited to TTF for legacy DefineFont3 fonts.
QE notes: Remember that bitmap comparisons could change slightly
Doc notes: N/A
Bugs: N/A
Reviewer: For Gaurav
Tests run: checkintests, QE had run local tests
Is noteworthy for integration: Yes
Modified Paths:
    flex/sdk/trunk/frameworks/flex-config.xml

I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
In the Xorg log, the differences are:
without 'nouveau.noaccel=1'
[ 30.761] (II) UnloadModule: "nv"
[ 30.761] (II) Unloading nv
[ 30.761] (--) Depth 24 pixmap format is 32 bpp
[ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
[ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
[ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
[ 30.777] (II) EXA(0): Driver registered support for the following operations:
[ 30.777] (II) Solid
[ 30.777] (II) Copy
[ 30.777] (II) Composite (RENDER acceleration)
[ 30.777] (II) UploadToScreen
[ 30.777] (II) DownloadFromScreen
[ 30.777] (==) NOUVEAU(0): Backing store disabled
[ 30.777] (==) NOUVEAU(0): Silken mouse enabled
with 'nouveau.noaccel=1'
[ 1191.621] (II) UnloadModule: "nv"
[ 1191.621] (II) Unloading nv
[ 1191.621] (--) Depth 24 pixmap format is 32 bpp
[ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
[ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
[ 1191.621] (==) NOUVEAU(0): Backing store disabled
[ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
[ 1191.621] (==) NOUVEAU(0): DPMS enabled
So now 3D acceleration is disabled.
I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
Last edited by berbae (2013-03-27 10:07:42)

Is RS480M2 support raid 1 for all 4 SATA drive?

Similar Messages

Maybe you are looking for