Is running a zcm report save to disk without ZRS possible ?

In a non-ZRS ZCM11.1a setup, is there a way to use one of the custom reports to run saving to disk on the server itself via command line ? The zcm servers are SLES11SP1 x_64.
Thanks in advance
Nimal

Similar Messages

Running a system report from SDK

Is it possible to run a system report such as the "Customer Equipment report" from within SDK and fixing the report selection criteria from within code? I need to be able to place a button on the BP header screen that runs the CE report for that BP without showing the first (selection criteria) screen that you would see when running the report from the menu.
This is similar to what happens when the graph symbol is used along side the BP account balance when the system presets the selection criteria for the sales analysis report.

Hi Gordon
Edward is correct, you can't modify reports.
But what you can also try is to run a trace on the db and run the report. With the trace you'll be able to see exactly how sbo retrieves the data. Many times they make use of stored proceudres to do the work. So my suggestion is use there same method to obtain the info but then display it however you wish.
Hope this helps

HT2490 Can I change Numbers settings to save to disk instead of iCloud?

Hello
I edit private spreadsheets so I don't really want Numbers saving to iCloud and making the data appear on every other Apple device I use. I just want it to save to the disk, just like every other spreadsheet on every other computer I've ever used.
I'm happy with my word processing documents being available on all devices.
Can I change the preferences somewhere so just the Numbers program saves to disk without going through the annoying attempts to save it to the iCloud every time I edit a spreadsheet?
Is it that Apple feels all documents are the same regardless of which program is used to create them? I don't think I'm as enamored with iCloud as Apple seems to be and I'd like more control and specific control over where my data goes. I think if I disable generic iCloud/documents it will erase a lot of other data on devices.
Thanks.
David

Some sites automatically redirect you to a site in the local language.
There is usually a link on such websites choose a language or go to an international version that allows to chose the language.
If the Google (Firefox) or Yahoo home page is in the wrong language then see:
Google: http://www.google.com/support/bin/answer.py?answer=873
Yahoo: http://help.yahoo.com/l/us/yahoo/homepage/troubleshooting/troubleshoot-02.html

UNABLE TO SAVE PORTAL REPORTS OUTPUT TO DISK WHEN USING INTERNET EXPLORER

Hi,
We are unable to save portal reports output to disk when we are using
Internet Explorer. This works fine if we use Netscape.
Steps to reproduce
1. Run a report from portal
2. Now from the IE menu, select File-> Save As
We get a warning saying that IE cannot save the web page
Any thoughts ?
Thanks
Tim

Tim,
Are you trying to save the HTML output ? You might encounter probs. with that, but that is more due to IE security
settings than the Portal.
You might want to check your IE security settings.
Hi,
We are unable to save portal reports output to disk when we are using
Internet Explorer. This works fine if we use Netscape.
Steps to reproduce
1. Run a report from portal
2. Now from the IE menu, select File-> Save As
We get a warning saying that IE cannot save the web page
Any thoughts ?
Thanks
Tim

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?

My bad Eric. The startup preference recognizes the primary as a 10.8.3 startup volume but when u select it the system does not boot. I can only boot from my external backup drive

How to disable save button on selection screen (1000) run from other report

Hi Experts,
Can any one let me know how to disable save button on selection screen (1000) run from other report.
Say I am running from report R1 which submits report R2, but the save button should be disabled on
report R2(selection screen 100).
Thanks in advance.
Regards
RP.

Hi RPReddy16 ,
Try this:
DATA :BEGIN OF t_extab occurs 0,
fcode like rsmpe-func,
END OF t_extab.
REFRESH T_EXTAB.
MOVE 'SAVE' TO T_EXTAB-FCODE.
APPEND T_EXTAB.
CLEAR T_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING T_EXTAB.
Regards,
José

Run a Crystal Report published on BW from SAP NetWeaver Portal without BOE

Hi all,
We need to create a report using Crystal Reports, save it to BW, publish it to SAP NetWeaver Portal, and run it from SAP NetWeaver Portal. We do not want to use BOE here.
Currently, we are able to save the report on BW.
With Xcelsius, we have seen that we can directly refer to the dashboard's technical name from SAP NetWeaver Portal. Is similar thing possible using Crystal Reports? If yes, how this can be achieved?
Regards,
Dhanesh Aradhye

take a look here:
Portal Part 1
/people/ingo.hilgefort/blog/2010/03/29/sap-businessobjects-enterprise-sap-enterprise-portal--part-1-of-4
Portal Part 2
/people/ingo.hilgefort/blog/2010/03/30/sap-businessobjects-enterprise-sap-enterprise-portal-part-2-of-4
Portal Part 3
/people/ingo.hilgefort/blog/2010/04/08/sap-businessobjects-enterprise-sap-enterprise-portal--part-3-of-4
Portal Part 4
/people/ingo.hilgefort/blog/2010/04/21/sap-businessobjects-enterprise-and-sap-enterprise-portal--part-4-of-4
but you still need the BusinessObjects Enterprise system as only the BusinessObjects system will actually render the report.
Ingo

Webi report - save as .csv is bringing double the number of rows.

Hello all,
I am running a webi report and then saving it as .csv file to my desktop but when I save the file it is giving me double the number of rows. In my report I have employee, employee key, attributes and Org unit and some measures.
The .csv file has one additional column at the end which does not have any header and that column has "1" in the rows which should be legitimate and "0" in the rows which are so called duplicates, in these duplicate rows there is all data except it is missing the employee key and org unit key.
If I save as excel I get the right number of rows.
has any one seen this issue before?
Thanks in advance,

Exporting to csv is different from exporting to csv.
If you have any filter on your crosstab or table and you export it to excel it will show you your data according to this filter. Let's say in your table you have amount 0 and 1 and you filter that column so it will show only those records where amount = 1. If you export it to excel you'll get what you see in your WebI report, that's only records with amount = 1.
But if you export to csv the same Webi report with the same crosstab or table filtered by amount=1, the csv export will ignore this filter and your csv will include amount 0 and amount 1 records.
I don't know if that's a WebI's bug, but that's what has happened to me.
A workaround could be adding your filter directly in the query pane, not filtering your table columns.
Also check your query pane to see what object is bringing that extra column in your table.

Report /save pdf format

Hi ,
I am working in 4.6c , my task is to save the report in pdf file format.
Previously it is storing in xls format. Now they want it in PDF format.
I have to run to the report, it has to generate a pdf file .
How to do it.
Thanks,
Balamurugan .R

Hi Murugan,
Try The Below Code.
data:   ssfcrescl type ssfcrescl.
data:gt_doctab_archive type table of docs,
     gf_filesize type i,
     pt_payslip_pdf type table of tline,
     pt_payslip_otf type table of itcoo.
move ssfcrescl-otfdata[] to pt_payslip_otf[].
call function 'CONVERT_OTF_2_PDF'
       importing
            bin_filesize   = gf_filesize
       tables
            otf            = pt_payslip_otf
            doctab_archive = gt_doctab_archive
            lines          = pt_payslip_pdf
       exceptions
            others         = 3.
*Download PDF File
call function 'GUI_DOWNLOAD'
exporting
bin_filesize = gf_filesize
filename = 'c:/xyz.pdf' "Give yor own path here
filetype = 'BIN'
tables
data_tab = pt_payslip_pdf.
Thanks & Regards,
Shiva vs.

My computer is reporting a hard disk failure. what to do?

My hard disk is reporting a failure (Disk Name Toshiba MK6465G4x ATA Device) on my HP Pavilion dv6 Notebook PC (64 bit OS) which uses windows 7 home premium. When I run a hard disk check, it fails (failure M11V51-55V5Q8-XD003G-60E803). ANY SUGGESTIONS?

Unfortunately with that fail code, no it can not be fixed. Some fail codes indicate a recovery can be run or the check disc might fix it, but not with this fail code.
I work for HP.

ZCM Reporting install failure: Wrong OS

Hi, I have downloaded the ZCM_Reporting_10.1.0.iso and would install the server on my ZCM server what is installed on a SLES 10.2 x64 with ZCM 10.1.1 x64. But I got the install message: Not supported OS. Is it true ?

I was also "bitten" by this same problem...ZCM 10.1.1 on a 64-bit SLES 10 SP2 server and when I tried to install the ZCM Reporting Server I got the same message.
It was only when I reviewed the fine print, and I do mean fine print, in the software requirements did I realize that NO 64-bit OS was going to be suitable for the ZCM Reporting Server.
Usually you would not expect to run into trouble installing a 32-bit application on a 64-bit OS but they do crop up occasionally but I was not too concerned in the case of ZCM 10.1 on a 64-bit OS about whether or not the ZCM Reporting Server would install OK. Hey, isn't this stuff supposed to work together? What happened to making IT work as one?
This does need to get "fixed" by Novell and BO because it is a problem that should not exist in the ZCM 10 world to begin with. Shame on them for being so lazy about it.
Novell should have pointed this out IN LARGE TYPE THAT THE ZCM 10.1 REPORTING SERVER CANNOT BE INSTALLED ON ANY 64-BIT OS. Instead they kind of tucked it away in the fine print where it waited to bite us.
Tim Wessels
Originally Posted by Craig Wilson
At this point in time, BOE is only supported on a 32-Bit OS.
Novell is working with Business Objects to get support for 64-Bit Platforms.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"deban0" <[email protected]> wrote in message
news:[email protected]...
>
> Hi, I have downloaded the ZCM_Reporting_10.1.0.iso and would install the
> server on my ZCM server what is installed on a SLES 10.2 x64 with ZCM
> 10.1.1 x64. But I got the install message: Not supported OS. Is it true
> ?
>
>
> --
> deban0
> ------------------------------------------------------------------------
> deban0's Profile: NOVELL FORUMS - View Profile: deban0
> View this thread: ZCM Reporting install failure: Wrong OS - NOVELL FORUMS
>

How do I avoid the "can't save to disk" notice when updating LION?

I've tried to update Lion 3 times (through Software Update) and after 2 hours of downloading it gives me a notice that it can't "save to disk." I have 80 gigs available on my harddrive so I don't know what I'm doing wrong. Please HELP!

Thanks for showing an interest… But!
I have tried all the regular stuff. This problem only showed up in OSX Lion. Up till then all was well at Snow Leopard and Adobe CS5.5 Suite. After upgrading to OSX Lion all Hell broke loose. Quite a catastrophe of conflicts. In Design wouldn’t launch. A problem with Suitcase Fusion 4. But PS CS6 had two major problems. One the Epson Artisan 835 could not be seen in Imports. A conflict between 32 and 64 bit formats and again, drivers. But the most persistent and perplexing problem has been that of the preferences. Oh and one other thing, whenever you quit the program, PS CS6, a message appears saying that the program has quit for no good reason and did I want to send a report to Adobe and/or Mac. Well I must have sent them a thousand reports. What I most suspect is file damage and incompatibility. What I have tried has not found the files to replace those that will reset themselves. i.e. .plst etc. without buggering up the works. I have tried to figure out what might have caused such changes between Snow and Lion other than the well known differences regarding supported stuff, formats and out of date software i.e. Rosetta. Some how or other I suspect damaged files. The kind of damage where a single character is missing and nothing works but no file checker in the world can detect as screwing up the works. Now in several cases a lot of re-installation has been done. But again no help. So putting a finger on the culprit file(s) has not been easy. Fortunately this machine has four active drives so reverting back to where all was OK is easy. But as for going forward, well that is at a standstill.
So, if any body out there has any insight to these three problems I would be most interested to see what you got.
Many Thanks

How to ensure FundCenter selection = blank when running FM drilldown report

How to ensure blank value in the "Funds Center" selection parameter when running FM drilldown report 2FMB40* (Assigned Funds Report)?
We tried to save a report variant with protected blank value in the "&0FICTR" variable (hierarchy node), and we also used FMEV to turn-off default value for this variable. However, during report execution it still takes value from the user parameter "FIS".
To prevent the system from using "FIS", we can only save the report variant with Funds Center = * (or the top-most node). Unfortunately, these would give different extraction results which we do not want.
Any advice how to get round this?

Referring SAP Note 390953, I don't know how to apply the solution of "using generic symbol # as an initial value"....
(1) I tried to save a report variant with # in the Funds Center field, but got error message "no matching funds center found" and couldn't proceed.
(2) I also tried tcode FMEV to set the variables &0FICTR, &0FICTRA ... with default value # (in table TKESV), yet still got no effect ... as user parameter "FIS" was adopted during report execution.
Any further suggestion please?

Error while running a customize report in oracle ebs

Hi ..
can anybody suggest how to solve the follwing error while running a customize report in oracle ebs?
XXIFMS: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Current system time is 03-JUN-2011 11:09:24
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DATE_FROM='2010/04/01 00:00:00'
P_DATE_TO='2011/06/03 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
stat_low = 9
stat_high = 0
emsg:was terminated by signal 9
ld.so.1: rwrun: fatal: librw.so: open failed: No such file or directory
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 9
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1068011.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1068011 on node D0005 at 03-JUN-2011 11:09:24.
Post-processing of request 1068011 failed at 03-JUN-2011 11:09:24 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-JUN-2011 11:09:24

Please post the details of the application release, database version and OS.
Is the issue with this specific concurrent program?
Can you find any errors in the CM/OPP log files?
Please see if these docs help.
On R12.1.1/Solaris Platform While Generating Oracle Reports Files Failed With Error " ld.so.1: rwconverter: fatal: librw.so: open failed: No such file or directory [ID 1067786.1]
Apps UPG Fail With Error Ld.So.1: Rwserver: Fatal: Librw.So [ID 961222.1]
Thanks,
Hussein

Urgent.....Error while running a jsp report from Jdeveloper

Hi,
I am getting following error while running a jsp report from Jdeveloper. I am using version 10.1.2.1.0. The same report is working fine when I am running it from report builder. ( Both these tools were installed using Oracle Developer Suite 10g version 10.1.2). I did search in oracle discussion forums and google, but I could not arrive at a resolution of error. Any help in resolving this issue would be grateful.
Error details:
Page url : http://<hostipaddress>:8988/Reports-reportproject-context-root/MyReport.jsp
Reports Error Page
Wed Oct 17 20:03:22 IST 2007
javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server myreportserver failed
javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server myreportserver failed
     at oracle.reports.jsp.ReportTag.doStartTag(ReportTag.java:464)
     at MyReport.jspService(MyReport.jsp:4)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:57)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
Could anyone help me out in resolving this issue.
Thanks
Siva...

Hi,
I posted this message in jdeveloper forum yesterday, but there was no response. So I thought of posting it in this forum to check my luck.
Thanks
Siva...

Is running a zcm report save to disk without ZRS possible ?

Similar Messages

Maybe you are looking for