Is SAP BI reporting is possible in ECC 6.0 with same client

Hi all,
                         My requirement is, we need to design SAP BI data flow in ECC 6.0 with same client only. Now I am designing the BI data models as per the requirement of SD sales reports in ECC 6.0.For this, when i was extracting the data from SD datasource(2lis_11_vahdr) in RSA3 its showing 0 records,actually as per VA01 some records are available but its not showing in the RSA3.
                          My doubt is , is it possible to extract the data from ECC 6.0 and load the data to the datatargets and get the SAP BI reports in ECC6.0 with the same client.
                          Please suggest as soon as possible.
Thanks

It is possible to load the data from the same client. It all depends on the source system and the client which has been connected in the RFC connection.
Let me know if this helps.
Regards,
Avinash

Similar Messages

BD64 issue having ECC + BI on the same client

Hi there,
We do have a small instance having ECC and BI in the same System.
The ABAP RFC connection is fine and when Replicated in RSA1 Datasources from SourceSystem R3 went fine.
But I think we have an issue with the Idoc settings.
Went through the doc [http://ecohub.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/908836c3-7f97-2b10-4cb8-e6790361c152?quicklink=index&overridelayout=true] and found that when BD64 it asks me the Sender / Receiver to be different.
Though as mentioned in our case it is the same.
It is really needed to update these settings in BD64 when both systems are in the same System?
Thank you,
A.

Hi Asik,
Thank you for the reply.
Yes, that is right.
We access BW and R3 through the same logon.
I found the issue though !!
Would explain it in case someone faces a similar issue.
1- The ABAP RFC connection was fine.
    Tested and transfered the DataSources fine.
2 - though there was still an issue with table RSBASIDOC not showing Transfer Structure field.
Solution:
Read
     u2022     http://ecohub.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/908836c3-7f97-2b10-4cb8-e6790361c152?quicklink=index&overridelayout=true
     u2022     Setting up Connection between BW and R3 for Data.pdf
     u2022     Step by Step on Changing ECC SourceSystem without affecting Datamodel Objects in BW.pdf
Followed the post:
Step by Step on Changing ECC SourceSystem without affecting Datamodel Objects in BW
1. Go to WE20 and check whether Partner profile T90CLNT090 exist in LS type,if not just add Parnter profile with same and save.
Partner profile Name: T90CLNT090
TYPE: LS
Give:
Ty: US
User: User Name
Lang: EN
and Save.
2. Again re-click on Partner Profile: T90CLNT090
you will see ,there will be some entries in Inbound & out Bound Tabs.
Delete the following from outbound:
1.RSRQST
Delete the following from inbound.
1.RSINFO
2.RSSEND
and save your partner profile.
3. now execute - RSA1, it will ask to active Workbench. Just activate it . it will work now.... Cheers.

Is it possible to migrate two database with same name (e.g.DB1 and db1)?

Hi,
I am trying to migrate two Sybase databases "DB1" and "db1".
In sybase "DB1" and "db1" are two different database.
OMWB doesn't complain anything but i am not able to see objects of "db1" database.
I noticed one thing that OMWB metadata has two entries for objects in database "DB1"
e.g.:
atwal2ora_dsn> select * from REPUSER.SYBASE12_SYSUSERS order by name;
------------------------------------------------------------------------------------------------------------------------+
| DB_ID | SUID | UID | GID | NAME | ENVIRON |
------------------------------------------------------------------------------------------------------------------------+
| 5 | -2 | 16395 | 16395 | TEST_GROUP1 | |
| 5 | -2 | 16395 | 16395 | TEST_GROUP1 | |
| 5 | 4 | 3 | 16395 | TEST_USER1 | NULL |
| 5 | 4 | 3 | 16395 | TEST_USER1 | NULL |
Thanks for your time
Mohinder

Mohinder,
Yes, its possible, but you seem to be using non case sensitive db settings. DB1 and db1 may be different but when we get to capturing the metadata about the db, this is getting confused.
I'd recommend keeping 2 repositories, one for each database.
Barry

Is it possible to add items back with same item code if deleted through SQL

dear all,
My client has completely revised the item master. So about 1000 items are needed to be removed from the item master. As it will be tedious to remove it one by one from SAP, first I tried doing this in the test database.
What I did was using a query I deleted the items groups wise as a bulk. But if I try to add any one of the deleted item back again with the same item code it is saying that the item already exists even if it is deleted from SQL. How to add the items?
There must be a solution for this.. Experts please help me ASAP in this situation.
waiting for your valuable solutions...
Yeshwanth Prakash

Hi,
First at all, i like to say : it is not recommend to do a update or delete statement by a sql query!
What I did was using a query I deleted the items groups wise as a bulk.
That would be a big mistake! See my introduction statement.
But if I try to add any one of the deleted item back again with the same item code it is saying that the item already exists even if it is deleted from SQL. How to add the items?
It clearly says that the items already existing. I think you only delete from the OITM table, but items not only stored in this one table. Of course there are many other tables like ITM1..ITM9 or the financial tables.
Regards Steffen
Edited by: Steffen Kamphoff on Jan 10, 2009 6:07 PM

Sap standard report for delivery document block.

Hi,
We want to block delivery document for further processing that picking and PGI.
For that we are looking for sap standard report if available so we could provide it to client.
so we need
SAP standard report for blocked delivery document.

Hi,
As far as my understanding there is no such report but you can try with report MATERIAL WHERE USED LIST
Please find t-code for this as due to system unavailable i am not mentioning t-code for same
kapil

Good day sir. Im newbie in using SAP Crystal Report. I hope you can help me with my problem

PROBLEM EXPLANATION
Pretend that the attached excel file is a crystal report file
Column A is the details to be compared. Column B is the details that i will have to use a formula in sap crystal report.
as you can see cell B3 is same with the value in cell A2, B4 with A3, B5 with A4, B6 with A5 and so on.
How can i get the previous data of column A and put it in column B using formula in crystal report? either basic or crystal syntax
My Column
Colmun with formula
7000
0
7689
7000
9457
7689
8472
9457
2364
8472
12395
2364
18273
12395
84723
18273
57483
84723
493837
57483
2823747234
493837
226374
2823747234
7646363
226374
85826263
7646363
75756236324
85826263
1239534
75756236324
Message was edited by: Ludek Uher

Hi,
Use the 'previous()' function.
Example:
Previous({Column A})
-Abhilash

ECC 6.0 with NetWeaver Ehp 1 without Ehp 4

Hello
Is this combination possible?
ECC 6.0 with NetWeaver Ehp 1 without Ehp 4
Thank you very much!

That combination is not possible. The information below is taken from http://www.sdn.sap.com/irj/sdn/nw-70ehp1.
Regards,
John
What is the implementation strategy for SAP Business Suite?
With the unrestricted shipment of enhancement package 1 for SAP NetWeaver 7.0, only implementations within standalone installations of SAP NetWeaver 7.0 are supported (e.g. for BI, EP, etc.).
For existing installations of SAP Business Suite systems (i.e. SAP ERP 6.0, SAP CRM/SRM/PLM, ...) etc.) that are based on SAP NetWeaver 7.0, the SAP enhancement package 1 for SAP NetWeaver 7.0 shall not be installed separately, as it will result in malfunctioning of the installation procedure and/or the final system state.
Business Suite 7 (generally available since May 5th, 2009) is technically based on the SAP enhancement package 1 for SAP NetWeaver 7.0. All relevant parts of enhancement package 1 for SAP NetWeaver 7.0 are included in the respective SAP Business Suite 7 installation routines and will be installed automatically underneath the SAP Business Suite systems when an upgrade to SAP Business Suite 7 is performed. More information is available in this overview presentation, more details can be found at the service marketplace quick- link /ERP-EHP (SMP login required).
General note on the relation of enhancement packages for SAP Busiess Suite and SAP NetWeaver:
Customers who have implemented certain enhancement packages for SAP Business Suite might have to implement a certain enhancement package for SAP NetWeaver 7.0 as well. Please refer to the respective documentation of the SAP Business Suite for details.

Is it possible to have 2 tables with the same name in an Orable database?

Hello,
I'm a complete Oracle newbie so please excuse my question if it's stupid.
I was trying to create 2 tables with the same name using different tablespaces but it does not seem to work. Like this (second time just change the name of the tablespace):
CREATE TABLE test_tbl (
id INTEGER,
status VARCHAR2(10),
last_modified DATE DEFAULT SYSDATE
TABLESPACE tblspc1Is it in general in Oracle possible to acquire this goal?
Thanks a lot!
P.S. I have already created the needed tablespaces
CREATE TABLESPACE tblspc1 DATAFILE 'tblspc1.dbf' SIZE 10MEdited by: 808239 on 02-Mar-2011 02:18

It is not possible to create two tables with same name in same schema.
A user can own one schema with his own name and another with the schema name SYS.
For this you have to grant sysdba privilage to the user and then have to connect using sys password or with the password specified in password file.
But this still you have to access to the table in sys schema using sys.table_name.
Hope Answered tthe Question.

Is possible to see group currency data in SAP provide report or query ?

Dear experts:
Is possible to see group currency data in SAP provide report or query for Assets. When the Depreciation area currency is different with the group currency?
My SAP version is ECC 6.0.
Depreciation area currency: USD,
Company code currency: USD,
Second local currency: Group currency(TWD)

You must have defined an additional dep area for group valuation too.
then only you can get the asset values in TWD curency.

SAP Crystal Report 2013 SP03 - Connection error with SAP ECC tables, clusters

Hi,
I'm trying to connect SAP Crystal Report 2013 with SAP ECC but I'm getting below error. I've read some where that We need to install SAP integration kit but SAP BI 4.1 it comes default, also had to install the ABAP cystal report transport - How to do Install this on SAP side -
and on the ECC side we had to develop Crystal Authorization - how to develop this?
Can someone screenshot of these steps and please suggest if something else can be done.

Hi Pawan,
Search for the error and you should see many threads for this issue.
Anyway, this is what I found:
logon failed. you do not have the necessary rights to design reports
Crystal Reports 2008 and BW - Installation and Configuration - Business Intelligence (BusinessObjects) - SCN Wiki
The wiki should have answers to all your questions regarding Transports, Authorization et al.
-Abhilash

SAP standard report to show Inter Company transactions

Basically, we have two companies that are buying and selling between each other. One of the companies is a subsidery of the other. So, the parent(x) can sell or buy from it's sub(Y) and visa versa. At the end of the period, we need to consolidate both companies for reporting purposes, therefore there will be elimination entries which should be identified.
I need an SAP standard report to show these transactions which might still be sitting on each other books unsold

Dear :
We are using ECC 6 SAP version and we have the t code FBU3 for displaying all inter company transactions. Have you done necessary configuration in OBYF. You can display all related inter company transactions through FBU3.
Your 2nd query corresponds to same credit control area that was assigned to two company codes. In order extend credit limit for a customer who is extended on two company codes which have same credit area. It is not possible you distinguish credit limit for a customer who is extended on two company codes having same credit control areas. CCA is defined at organization structure level and for the distinction you will have to define new credit control area in customization at
enterprise level i-e
Enterprise Structure.... Definition.... Financial accounting....define credit control area
Assignment.....Assign credit control area to co code
Do necessary customization for SD module
and then in credit management for AR you will have to assign the credit control area to company codes i-e
Account Recv/A/c Payable.....Credit Management.... Assign permitted CCA to Co code
. This is the only way to to segregate customer credit limit for two company codes. Please revert in case of any confusion.
Regards

Excel Download of a Web SAP BW Report asks userid and password.please help

Dear BW folks,
Issue: When I run a specific SAP BW Report from Web and download the same into excel & csv.
When I open the excel file downloaded, it asks me user name and password to enter. csv file downloaded doesn't ask.
The report has 0cust_sales hierarchy and SBU hierarchy.
Is there any thing to do with these hierarchies that the excel download is asking user name and password?
Please help me out!!!!! This report needs to be downloaded into excel sent to my manager.....
Regards
Pavan

Hi Pavan
It is possible,please refer the below link
Report execution without prompting user id
Providing un-secured access to a web report.
Also, for the time being, you can run the query and save a workbook and sent across
These will resolve the issue
Thanks
Pavan Agarwal

CRYSTAL REPORT FOR ENTERPRISE ON ECC

Hi Everyone,
I have been trying to connect Crystal Report for Enterprise over ECC via universe as we don't have option
to connect CR4E directly to ECC.
So, I have made a universe in IDT and published it in repository.
Now, when I am using that universe in WebI Report and DashBoard then it is working fine but the same is throwing
the error while I am trying to connect with CR4E 'Failed to execute query: 'Fail to create an instance of Job : com/businessobjects/i18n/locale/BoLocale'.
The same error 'Fail to create an instance of Job : com/businessobjects/i18n/locale/BoLocale' was also coming when we try to save the IDT with Secure Connections is set to Server Middleware(Window -> Preferences->Information Design Tool ->Secured Connections ->Server Middleware).
Regards,
Raghwendra

Hi,
As per the SAP Note 2022008 - Crystal Reports for Enterprise gives error with ERP Universe this is is the bug in
SAP Crystal Reports for Enterprise 4.1 Support Pack 3 Patch 1
SAP BusinessObjects Business Intelligence Platform 4.1 Support Pack 3 Patch 1
This issue has been reproduced at SAP and is found to be a bug (ADAPT01725424).
Solution
This issue has been fixed with BI 4.1 SP3 Patch3.
Regards,
Amit

Multiple instances of Crystal Reports Viewer possible in WPF?

Hi, I've dragged and dropped three Crystal Reports Viewer controls on my WPF application. The goal is to be able to select up to 3 reports from a listbox and click run to generate the reports simultaneously. When I select just one report, it works fine. However when I select multiple reports it throws errors (object not found, etc). It seems there is a problem with multiple threads. Is it possible to have multiple instances of the Crystal Report Viewer display reports simultaneously? I am using version 13.0.9.1312 from the link below along with VS2013 C# WPF.
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads
Thanks,
Syed

I was able to quickly cobble together a two viewer app that looks like this:
The code is like this:
Public Sub New()
        ' This call is required by the designer.
        InitializeComponent()
        ' Add any initialization after the InitializeComponent() call.
        Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument
        crReportDocument.Load("C:\tests\formulas.rpt")
        CrystalReportsViewer1.ViewerCore.ReportSource = crReportDocument
        Dim crReportDocument2 As New CrystalDecisions.CrystalReports.Engine.ReportDocument
        crReportDocument2.Load("C:\tests\report1.rpt")
        CrystalReportsViewer2.ViewerCore.ReportSource = crReportDocument2
    End Sub
For more details see the document WPF Project Using the Crystal Reports WPF Viewer in 8 Easy Steps
Now a couple of things to keep in mind;
1) The report engine is based on 3 Concurrent Processor License (CPL) model. Meaning you can process at most three reports at the same time. In my test, doing the above code for four reports worked, but the reports are very, very simple - and with saved data. What a "real" world reports will do, I am not sure. I do know that in a web app, the reports are queued up until one report is done and thus a CPL is freed up. You will also need to keep in mind any database connection limits, etc.
2) There is also a Print Job limit. This by default is set to 75. In a nutshell, almost anything done with a report is a Print Job. E.g.; paging, zooming, drilling, searching, etc., etc. In addition subreports are considered to be Print Jobs. Thus a report with one subreport in a detail section that returns a thousand rows of data and therefore running 1000 subreports will error out.
You can read more about Print Job limits here:
Crystal Reports Maximum Report Processing Jobs ... | SCN
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Need to find All Custom Reports which are based on SAP standard reports

Hi Specialists,
I would like to find out all the customized reports which are a copy of SAP standard reports in the client's system.
For Eg. RPCP11G0 is the SAP standard report which has been customized & it's code has been re-written into a Custom report i.e. ZGBPPYMP001_P11D.
I would like to know all such occurences in the system.
Steps already done:
1) Tried searching with RPR_ABAP_SOURCE_SCAN & RS_ABAP_SOURCE_SCAN.
Please suggest .
Thanks
Abhinav.

it's only possible with an tool-program
when your developers have not change the line with the REPORT-command.
e.g.
standard-report is RAGITT01
copy is ZC_RAGITT01 or sth like this
but report line is unchanged in copy: "REPORT RAGITT01 MESSAGE-ID AB..."
solution:
select all reports from TRDIR/TADIR from your Z/Y-device classes
and analyse the reports with
read report ZC_RAGITT01 into wa.
and use find for searching 'report-command'.
and check whether the result of that finding is an standard abap
hope that helps
Andreas

Is SAP BI reporting is possible in ECC 6.0 with same client

Similar Messages

Maybe you are looking for