Is SAP NetWeaver Developer Studio 2004s Supported on SUSE Linux

Hi,
Is SAP NetWeaver Developer Studio 2004s supported on Linux? It appears you can get a trail version of SAP NetWeaver Developer Workplace 2004s for Linux but there are no installation guides (SAP NetWeaver Developer Workplace nor SAP NetWeaver Developer Studio) to be found anywhere.
Thanks,
Luke

Hi Sajesh,
The SAP NetWeaver Developer Studio Installation Guide does not say Linux is supported (see below).
Luke
1 Overview
Purpose
This document describes how to install the SAP NetWeaver Developer Studio as a standalone version. To install as part of the SAP NetWeaver Developer Workplace, see the installation guide Developer Workplace for SAP NetWeaver 2004s.
You can see the SAP NetWeaver installation guides at service.sap.com/instguides.
Platforms
You can install the SAP NetWeaver Developer Studio on:
Windows 2000
Windows XP
Web Browser
You require Internet Explorer 5.5, or higher.
Minimum Hardware Requirements
The SAP NetWeaver Developer Studio requires approximately 500MB disk space, 512MB RAM, and an 800MHz processor.

Similar Messages

  • Is SAP NetWeaver Developer Studio 2004s Supported on Linux?

    Hi,
    Is SAP NetWeaver Developer Studio 2004s supported on Linux? If so, where is it in the PAM (Product Availability Matrix) and Linux specific installation guide(s)? Everything I can find does not talk about running and or installing SAP NetWeaver Developer Studio 2004s on Linux.
    Thanks,
    Luke

    Thanks Jordan!
    Luke

  • SAP NetWeaver Developer Studio Support Portlet Development

    Hi Everybody,
    Do we create portlet with SAP NetWeaver Developer Studio SAP. NetWeaver Application Server, Java(TM) EE 5 Edition support or it does not support Portled development.
    Is there any portlet plug-in for NWDS to develop portlet.
    Thank You
    Syed Saifuddin

    Hi Syed,
    From your post I can understand that you want to use standard portlets in EP6. Unfortunately this is not supported in NetWeaver 04s which you are probably using because of EP6.
    These portlets, that are compliant with JSR168, are supported in the next release – NetWeaver CE 7.1 (JEE 5) and the portal that will be shipped with it.
    However how to write a Hello World portlet you can learn from the following article: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/14b5d01e-0e01-0010-24aa-f12ee5940060
    Regards,
    Diyan

  • Error during installation SAP SAP NetWeaver Developer Studio

    Hello,
    Can somebody help installing SAP SAP NetWeaver Developer Studio?
    I get the message:
    SAP NetWeaver Developer Studio 2.0.0. Setup Wizard not Completed
    The SAP NetWeaver Developer Studio 2.0.0 Setup has not successfully installed all selected components on your computer, either because a component could not be installed or the process has been aborted.
    Click Finish to exit the wizard.
    The following program files could not be installed:
         c:\documents and settings\all users\documenten\sap\workspace\.metadata\.plugins\org.eclipse.jdt.launching\vmconfiguration.xml
    The installed applications may not function correctly until all program files are successfully installed. For detailed error descriptions, please open file://D:\IDE\setup\saplogvw.exe .
    The following program files could not be installed:
         c:\documents and settings\all users\documenten\sap\workspace\.metadata\.plugins\org.eclipse.jdt.launching\vmconfiguration.xml
    The installed applications may not function correctly until all program files are successfully installed. For detailed error descriptions, please open file://D:\IDE\setup\saplogvw.exe .
    It looks like a Windows XP problem, because manually I can't copy or create a file in de directory:
    C:\Documents and Settings\All Users\Documenten
    So the following directory doesn't exits:
    c:\documents and settings\all users\documenten\sap\workspace\.metadata\.plugins\org.eclipse.jdt.launching\
    It's weird that I don't have access to the "Documenten" directory (this is the dutch Shared-documents-directory) , because I never changed it.
    When I right-click the directory "Documenten", and I go to Properties, then I don't see a tab setting access groups.
    How can I get access again to the "Documenten"-directory?
    Kind regards,
    Alwin.

    Sunil,
         There is a NW-DS version on the NW4 test drive DVD given out at TechED which I believe was also posted on the ftp.sap.com before TechEd '04 for CeBit 2004. I personally would like to put my vote out there for getting preview versions to the hands of admins to install and kick the tires before we try to convince management to buyin to purchase a product. Another way SAP reduces TCO?
    Bill

  • SAP NETWeaver Developer Studio

    Dear All.
        Does any one know where can i order the CD  that have the SAP Netweaver Developer Studio 2.0.15?
    BesT Regards
    Thanks in Avanced.
    PMR

    Please go to service.sap.com,  click the SAP Support Portal, enter credentials.  Click "Downloads" from menu bar.  Click "search for all categories" on the left.  In the search term box,  enter JIDE15P_1-10002804.SAR  and click search.  Here is the download, click on the JIDE15P_1-10002804.SAR and you should get a popup for credentials again,  then a download dialog.  Click save.
    Regards,
    Rich Heilman

  • SAP Netweaver Developer Studio (Software) needed

    Dear all,
    I found out that the Developer Studio is not a part of the SAP Netweaver 200s SR1.
    Could someone tell me where I can find the
    1) "Software of SAP Netweaver Developer Studio" ?
    2) a link for Installation?
    We already installed Netweaver with usage Type (MI,DI, NWA, PI).
    Thank you in advance.
    Hanse

    Hi,
    I am using Netweaver 2005s SR1 SP 6 (sap.com/SAP-JEE  7.00 SP6 (1000.7.00.6.0.20060306103300) ).
    So I think the Correct one is:
    000008      JIDE06_0-10003480.SAR   SAP Netweaver Developer Studio 7.00 SP06 
      Support Package NW DEVELOPER STUDIO 7.00 Win32
    Am I  right?
    Because the download takes a long time so I want to be sure bevore I los time again.
    Thanks in advance
    HanseAtik

  • Installation SAP NetWeaver Developer Studio X Windows VISTA

    Hi,
    I'm about to buy a Win VISTA licence desktop and before decide for this OS I want to be sure that the SAP NetWeaver Developer Studio is completely compatible with.
    There is any documentation about this ?
    I've checked some docs, but they only refer to Win 2k and Win XP.
    Kind regards,
    Eduardo Arantes

    Hello Marlo,
    I had the same issue with RFC models in NWDS on Windows Vista. Fortunately I was able to find a simple solution which you find here: Re: Can't create model in Web Dynpro. Basically this solution lets NWDS think it is running on XP.
    I've worked with NWDS (version 2004s, SP 14) on Vista for more than 3 months now and I haven't encountered any other issues, except for some general bugs...
    Regards,
    Hans de Boer

  • Where to download entire SAP NetWeaver Developer Studio ?

    I'm a rookie ,I have searched all  the internet ,but couln't find the correct download address for entire SAP NetWeaver Developer Studio .
    For example ,
    I use  a new windows xp professional to begin develop,
    my target product is sap netweaver 2004 with EP and KM.
    where to download the environment.
    I'm downloading the Patches  for service.sap.com/swdc:
    "SAP Netweaver Developer Studio 7.00 SP11 "
    and
    "Patch for SAP Netweaver Developer Studio 2.0 SP12 "
    but which is correct ,what is the deffrence between version 7.0 and version 2.0 ?
    this two archive is the entire software or is only the patch?

    Hi,
    Path for download :
    Installations and Upgrades" SAP NetWeaver" SAP NETWEAVER" SAP NETWEAVER 04 --> NW04 SR1 SAP NW DEVELOPER STUDIO 2.0
    From SAP Netweaver 2004s -- Netweaver developer stidio version is 7.0 and for Netweaver 2004 - its version is 2.0
    Thanks,
    Tanuj

  • Download of SAP Netweaver Developer studio

    Hi,
    I want to download SAP Netweaver developer studio.
    I searched on service.sap.com where I could find some support packages but not any installable.
    Where will I find the full installable(exe)
    Can I install SAP netweaver developer studio using these support packages. How do I install using the support packages.
    We have SAP MI 2.5 SP09 installed on our system. Which service pack of SAP Netweaver developer studio should I install.
    Regards
    Raja Sekhar

    hi Raja,
    There are already some posts in WebAS general on how to upgrade your WebAS. kindly search for them. As far as i know there are no documentation available for upgradation.
    At the max, it should take only 10-14 hours to upgrade.
    The upgradation goes like this :-
    *. Stop the server
    1. Kernal Patch - after this start the server.
    2. SPAM Patch - Transaction code SPAM in client 000 user DDIC.
    3. ABAP Patch - Transaction code SAPM in client 000 user DDIC.
    4. J2EE Patch - A Installable like SAPinst.exe file
    You can jump from sp09 to sp14 for J2EE stack right away.
    But for ABAP patches, you should go step by step. ie. you have to add patches 09,10,11,12,13,14 - all of it can be found from Service.sap.com/swdc. you may do it at one go - by putting them in a queue in SAPM and let the system do it one by one. The same procedure for SPAM Patches (level 19) - yours will be in level 17.
    Kernel patch is just copy pasting the files into its directory. it will get over in no time.
    Regards
    Arun.

  • SAP Netweaver Developer Studio SP16 - download

    Please let me know where I can download SAP Netweaver Developer Studio SP16 - is it available on SDN or do we have to be a SAP partner to get this version?
    I tried the full SP16 Java Edition (4 files) but it doesn't contain Studio. The only version of Studio I can find is SP9.
    Thanks,
    Alastair

    Please could you let me know where I can download it. I have tried the following packages from SDN; results are as stated.
    SAP NetWeaver Application Server
    - Developer Studio without Web Dynpro projects    
    SAP NetWeaver Application Server J2EE 5
    - Developer Studio without Web Dynpro project
    Slim Java Edition-Trial (minimized memory consumption)
    - Developer Studio with Web Dynpro v. SP 9
    Full Java Edition-Trial
    - no Developer Studio included
    SAP NetWeaver 2004s Java Trial Version
    - no Developer Studio included; it is available only as a separate download and is v. SP 9
    Thanks,
    Alastair Calderwood

  • Issue about SAP NetWeaver Developer Studio download!

    Hi, all
    as mentioned in the topic , where can i get the SAP NetWeaver Developer Studio installer  package.
    coz currently, i am studying Adobe interactive form.
    thanks very much!

    David,
    You will need a Markeplace id to access the downloads section as mentioned by Arafat.
    Ask your Basis guy to create one for you and then goto following path to download the NWDS:-
    http://service.sap.com/swdc
    --> Click on downloads
    --> Support Packages and Patches
    --> SAP NetWeaver
    --> SAP NETWEAVER
    --> SAP NETWEAVER 7.0
    --> Entry by Component
    -->  Developer Studio
    As far as I know there is no trial version NWDS but you can download complete NetWeaver 7.0 release from [here |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60d6c8b7-5d8f-2910-31bf-ebdf74fefd8b] which contains the NWDS.
    Chintan

  • From Where can i install ABAP plug-in in SAP Netweaver Developer Studio 7.3?

    Hello,
    I have Installed SAP NetWeaver Developer Studio 7.3 and I was trying to install ABAP plug-in but i couldn't found the link to install.
    Later i found SAP Development Tools for Eclipse this link but its not working. As i came to know it will work only for Luna (4.4) or Kepler (4.3).
    Would you please let me know how to install ABAP plug-in in SAP NetWeaver Developer Studio 7.3.
    Thanks and Regards,
    Shaik Shabeer Ahmed.

    Hello Ahmed,
    Use the links in that page:
    NWDS Download Links - Java Development - SCN Wiki
    And here also an installation guide:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80a100d2-109f-2e10-e996-c2b80803740b?overridelayout=t…
    Best regards,
    Serhat

  • How to download project template into the SAP NetWeaver Developer Studio

    Hi,
          I want to download project template into the SAP NetWeaver Developer Studio related to invoice detail get detail,get list etc.
    How to do so?Actualy my requirement is to create an iView whcih contain the detail about the invoice.
    Thank,
    Kundan

    Hi
    If you have zip file of the project then unzip it into your project  location where all projects are there .then in NWDS go to file->import->multiple existing project into workspace->browse the file where you have saved it and select the comp folder inside the project folder->click finish.Now you are able to see the webdynpro project in the webdynpro explorer.If its not appearing then go to Navigatore and right click on project and click on open project, it will open the project in webDynpro explorer.
    Thanks
    Susmita

  • Is SAP NetWeaver Developer Studio  Version: 7.0.12 Compatable with JDK 1.5

    Hi
    I want to user Java SDK version 1.5 instead of 1.4.
    Is SAP NetWeaver Developer Studio Version: 7.0.12 compatible with this or not.
    Please let me know

    Hi
    If you are using EP 7.0, then NWDS 7.0.YY version need to be used. //YY depends on your  patch of EP7 .As you have mentioned your are using NWDS 7.0.12, that means your portal SP level is SP12.
    In my prject i am using JDK 1.4 for NWDS 7.0.15 and its works fine.I have asked two of my colleagues , they told that in their project they are using JDK 1.5 for EP 7.0 server and application is working fine for them.
    So
    Thanks
    Susmita

  • How to configure oracle to SAP NETWEAVER DEVELOPER STUDIO STEP RAGARDING

    hi
    can u help me on this
    i got problem
    regarding configuring oracle to sap NetWeaver developer studio what i have deployed any thing studio
    that would reflected to database
    bye

    Hi,
    Check this,
    WebDynpro and Oracle Connection
    WebDynpro and Oracle Connection
    Regards,
    Vijayakhanna Raman

Maybe you are looking for