Is SAP-OSS RFC Configuration required for Technical Monitoring ?

Hi Experts,
I have not configured the SAP-OSS rfc connection.Is it required for setting up the technical monitoring(Tcode : SOLMAN_SETUP).
If Yes can you please help me in solving the above problem.Our aim is to configure  technical monitoring for  system and self-monitoring.
Thanks In Advance,
Satheesh E

Hello,
I am assuming you are speaking about 100 concurrent users and not the entire company userbase.
Core i5 (although is dual core underneath) is generally meant for desktops, having said this, please note that its difficult to arrive at any recommendation based on simply userbase. You need to have more data with you with respect to amount of transactions, concurrent users, peak period, load during peak period etc.
You need to use SAP's quicksizer to calculate the amount of SAPS for your production servers, SAPS is the unit used to calibrate your hardware for running SAP Applications.
If you provide your SAPS value to hardware vendor, they will advise what CPU rating and how many CPUs you need. They will infact tell you the entire configuration that you need.
you can also buy the following book:
http://www.sap-press.com/products/Sizing-SAP-Systems.html
Regards,
Siddhesh

Similar Messages

  • Configurations required for IDOC to File

    Can any body suggest me the configuration required for integrating remote R/3 system with the XI Server.
    I want to know the following.
    1) How and where to configure R/3 with the XI server.
    2) What are the configurations required for Outbound and Inbound IDocs in R/3 and XI Servers.

    Hi Rajeshwar,
    take a look over here:
    https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/weblogs/topic/16
    you'll find at least 5 weblogs that show the idoc configuration
    Regards,
    michal
    XI FAQ - http://www.bcc.com.pl/netweaver/sapxifaq

  • SAP Web Dispatcher Configuration guide for Windows

    Hi,
    I am searching for SAP Web Dispatcher Configuration guide for Windows. It is WAS 6.4, SP14 and JAVA. If any one knows this mean please guide.
    Thanks.

    Hi  Mahesh,
    check out the help pages here:
    http://help.sap.com/saphelp_nw04/helpdata/en/f5/51c7d170bc4a98b1b5a0339213af57/frameset.htm
    Regards,
    Pascal

  • What are the backend configuration required for photo upload from portal?

    Hi all,
    When i am trying to upload the photo from portal  it is giving error
    can not archive the photo
    we are using portal 7 and  ecc 6.0
    I want to know
    What are the backend configuration required for photo upload from portal
    Can any but help me out
    Rajendra

    Hi,
    Are you using the standard iview. If that's the case you need to configure in the backend. Meaning you need to store the photo in the Org management(HR) which the HR functional guys will do. You just need to add the iview to your role.
    Let me know if you require further informationn.
    Award points if helpful.
    Cheers,
    sathya

  • Is there is any way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory

    Hi
    Can Configuration Manager provide a way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory. How can I know what amount of data is consumed during that process

    Place archive_reports.sms in %systemroot%\ccm\inventory\temp\ for both 64-bit and 32-bit computers.
    There are two situations where you can use this depending on the type of client:
    1. To keep inventory reports on a client (that is not an MP), create the following file:
    %systemroot%\ccm\inventory\temp\archive_reports.sms
    2. To keep inventory reports on a MP (that is also a client), create the following file:
    <x>:\sms_ccm\inventory\temp\archive_reports.sms
    The XML file will be saved in the inventory\temp folder.
    More information on the above here: http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx

  • Sql Server configuration requirements for SAP ECC 6.0

    Dear  All,
    I am using Sql server 2005 Enterprise as data store for Sap ecc 6.0.There are certain configuration requirements to be done while installing it so that sapinst.exe (sap installer) is able to use it to create its own DB's.
    For eg it requires a collation of SQL_Latin1_General_CP850_BIN2 whereas the default that gets installed is SQL_Latin1_General_CP1_CI_AS.
    Like this there are other requirements which I am not aware of.Most of the docs available on the Internet are talking of ecc 6.0  with Oracle 10.2G which is the most common combination.I am having docs for this combination.
    I am installing ecc for the first time.
    *I am unable to download docs from sap. marketplace as it requires a login given to certified users or sap purchasers.I am neither.*
    Can anyone help me with this.If anyone has ECC 6.0 installation guide with sql server it will be serve my purpose.
    Thanks for your efforts.

    "Excuse me?
    What he is doing is illegal , you know what that means, right? If you don't believe me, read the license that comes on the first installation DVD.
    Actually, I even think it's kind of barefaced to ask in the forum of the software vendor for help! I mean, it's like asking in a bank forum how to rob and fraud the bank! You - and many others - may think that it's right and ok to do that. I tell you: it is not. Not for "home use", not for personal use, not at all.
    You can use the software available here in the SDN to lean and study, that's why it's there.
    If you deal at all with copied software, then just be smart enough to make other people not notice. He can be happy if he's not prosecuted (which would legally be possible)."
    Do u understand what is legal or illegal? Have u read the license in full?
    The license does not put any limit on the number of users.So if I am using it means that one more user has been added by the license holder.
    Therefore there is nothing illegal about it.
    It would have unethical (not illegal) if the software is being used for a business purpose other than for which it has been purchased.
    Since it being used for training purpose the above does not hold good.
    In fact it is SAP who is benefited in the long run bec' after a person learns it technology because  he is going to implement it somewhere, for which the concerned user will have to purchase a license.Therefore I am helping SAP to increase its business.
    But there are some stupid people who don't understand these things but are ready to shout at the top of their voice thinking themselves to be intelligent.
    Edited by: coolmind26 on Jun 5, 2011 10:57 AM

  • Reg: RFC / IDOC required for doing CIDX Scenario

    Hi! Gurus,
    This is Amar Srinivas Eli. I have task here to work and implement CIDX Scenario succesfully. There are some business cases as per the CIDX standards from that I was selected one Business case i,,e, FORECASTING.
    But inorder to implement that scenario I need some RFC's or  IDOC lists from SAP side whether it may be a source or target side..what ever it may be...and other side will be CIDX format.
    Here I need your help in the below mentioned tasks. Kindly help me out in a detailed step by step guide and do the needful to me.
    1. How to get RFC / IDOC name from R3 System and I know that I can get RFC from SE37 and IDOCs 
        from WE05 but I need whether all the required fileds are statisfying in the RFC's or not.
    2. My first preference is only for STANDARD SAP RFCs or IDOCs.
    3. Please let me know how to see the inner fields present in those RFC's
    4. ALso please provide any configuration guide which contains screen shots if you already worked
        earlier on CIDX Scenario I mean step by step and also for testing
    5... tell me if there is any other tool other than STK kit for testing CIDX messages.
    6.  Is there any Freeware STK tool kit is there or not...
    Also share your experience and errors that you have faces while doing this CIDX Scenario.
    Regards:
    Amar Srinivas Eli

    Hi! All,
    Thanks for your fast response..
    Hi! Raja,
    I gone through your points. Here I have few doubts on those please clarify that.
    1. Coming to testing i didt used any testing tool , but you can comre your output using XML Spy or Stylus studio.*
    *CIDx Documents,you wil find in SDN please search in SDN.
    Means Without using STK Tool or else some other tool How can I get the CIDX response for my request in the Testing environment. See I am not doing this in  real time I am trying to findout the solution for Business cases so I need one testing environment tool right ? Is that ALTOVA XML spy will give no right ?
    Note: You told that you have done that business case IDOC--CIDX Order change / req Will you please share the information documentation I mean step  by step procedure for end to end doc...based on your scenario ?
    2. I know those R3 and PI settings I mean configurations means ports and RFC destinations and all those..but only thing I dono is "How you got that IDOC I mean on what basis and how did u search the IDOC?"
    3.  See Here I am working on topic FORECASTING it includes so many sub tasks like Deman PLan req and response, supply plan req and response and replenishment order and etc....so based on that how can I get those related RFC's or IDOC's in order to communicate from R3 Side
    If Suppose I have seen one RFC/IDOC and for example out of 10 fields few are there in one IDOC and another few are there in another IDOC then in that case I need to go for Multimapping IDOCs I mean 2 Senders to one Receiver if yes Is it possible?
    My first requirement is based on the above mentioned business cases how can I get the corresponding RFC's or IDOCs ?
    Regards:
    Amar Srinivas Eli
    Edited by: Amar Srinivas Eli on Jan 5, 2009 12:19 PM

  • Configuration require for SOLMAN after installation

    Dear all,
    I have successfully install Solution Manager 7.0 EHP1 on Windows Server 2008 Oracle 10g database.
    Now I cant understand what are the configuration require and from where shall i start?
    Please help me as I am a beginner.
    Thanks
    Nurujjaman

    Hi,
    Follow the steps from the configuration guide for basic configuration activities:
    https://service.sap.com/~sapidb/011000358700000308502009E/SM_CONF_SPS23.pdf
    Also check http://service.sap.com/~sapidb/011000358700001735062008E to get a visual help.
    For advanced configuration, follow the RKT at http://service.sap.com/rkt-solman
    Regards,
    Srikishan

  • Configuration required for attached for a file in a PO in ECC 6.0

    Hi All,
    1) Is any configuration/setting required for attaching  a file in a PO/PR ECC 6.0.
    2) How we can mail /send that file, is any enhancement required
    Kunwar

    Hi,
    In One ID for any PO ,when go sytem in toolbar --> sevices for object,I am getting the services for object and showing the attachment ,but in another ID with same server ,computer ,it is showing "No services avaiable"
    please guide any configuration/ setting missing?
    Kunwar

  • Status Profile: Configuration required for authorisation based on user

    hi friends
    from the sale order , i configured the status profile for authorisation for release the item level .
    so what i do for cofiguration to give authorisation particular user(manager) and also not required for user(end user)
    with regards
    dinesh
    Edited by: code acess on Feb 28, 2011 6:22 AM

    hi ram
                     thanks, how i give authorisation for particular user.. i need configuration setting for authorisation. i dont know what i tell to Basis for authorisation.
    Consultant
    with regards
    dinesh

  • SAP Netweaver RFC SDK bindings for Node.js

    Hi all,
    I have just completed a first version of bindings to the SAP Netweaver RFC SDK for [Node.js|www.nodejs.org].
    You are encouraged to inspect and download the source code on [https://github.com/jdorner/node-sapnwrfc|https://github.com/jdorner/node-sapnwrfc]. For further convenience, I have also supplied a package for use with the node package manager (npm). Nevertheless, you will have to download the SAP NW RFC SDK beforehand. Thus, you should carefully read the README on GitHub for more detailed instructions.
    Please let me know if you have problems installing/compiling the module. At the moment it has only been tested on a x86_64 linux platform.
    Regards,
    Joachim

    Thanks Mike,
    For example we want to executie Function Module and need to prepare/allocate TABLE parameter.
    In doing so we need to invoke function RfcGetStructureDescHandle is described in doc.
    However, we cannot find it anywhere in H files under SAP NW SDK 7.10 dir structure.
    Do you have an example of how to create a TABLE parameter (export for example).
    We are going to reproduce the symptom with the demo source distributed with the SDK.
    Any help/suggestions is greatly appreciated,
    Alfonso

  • Configuration guide for Technical Resource / Technical data in BRIM Provider Contract

    Hi Experts,
    I am trying understand the concept of Technical Resource / Technical data described in the BRIM process. The help describes the configuration of schema on the product master. But I could not find any info on how this is linked to the Provider Contract.
    We are looking at opportunity to replace the Ibase info associated with the Service Contract and are exploring if the Provider Contract - Technical Resource info.
    Thanks for any help you can provide.
    Regards,
    Mandar

    Hello Mandar,
    normally you should be able to capture the resources without any further activities...
    Just for confirmation: You try to capture the resoruces for a provider order? Service contracts do not support Technical Resources. Provider Contracts do, but don't allow manual changes - all changes are captured via Provider Orders.
    So I would start analysis to find out if the issue is on UI level (view not displayed or something) or if the API layer does not work at all.
    You could start checking in CL_CRM_TC_ORDER_CHANGE=>SET_TECH_RES_DEFAULT() and see if your schema is picked up correctly and if the default entries are generated.
    Do you see the view for technical resources at all? If yes...:
    If you create resources with min quanity = 0, a little pitfall is that the "create" buttons in the table for technical resources are little difficult to observe. But for each resource type the table for technical resources should containt a button according to your schema to create the entries...
    Best regards
    Stefan

  • STEP BY STEP  Configuration require for setup SLD Connections

    hi I have installed the sneak preview 7.0 netweaver.
    I would like to set up the SLD connection for R/3 system.
    kindly provide the step by step configurations requied to set upd the SLd connection to R/3 server
    Regards
    Vijay

    Hi,
    Refer to this document - [SLD Configuration guide for SAP NW7.0|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50924080-0627-2a10-2b89-8cb87b972fb1]
    For more info on SLD refer to this link - [SLD|System Landscape Directory (SLD)]
    Regards
    Srikanth KV

  • Configurations Required for Excel download in IR

    Hi,
    Please let me know the configurations req for enabling Excel download feature from Interactive report.
    Currently i see only CSV and PDF options in report attributes page.
    Regards,
    CKLP

    Hi,
    You need advanced printing engine e.g. BI publisher
    You can start check these links
    http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html
    http://carlback.blogspot.com/2007/03/apex-cocoon-pdf-and-more.html
    http://ubuntuforums.org/showthread.php?t=1004742
    Search more information e.g. Apache POI and FOP from this forum
    Br,Jari

  • Where do I set the polling frequency for Technical monitoring in Solution Manager 7.1 SP10 ??

    Hi All,
    I am customizing my technical monitoring templates and would like to know :
    1. Where we can set the polling frequency for each metrics for triggering alerts through Technical monitoring in Solution Manager 7.1 SP10 ??
    2. Is it like each time our threshold is breached, it will send an alert irrespective of polling frequency ??
    I know the data collection interval time for each metrics in technical monitoring template but the as per my observation the polling frequency is different.
    Need your guidance.
    Regards,
    Manish K

    Hi Javier,
    Refer to the documentation 'MAI Alert Consumer BAdI Interface' under
    http://wiki.scn.sap.com/wiki/display/TechOps/Alert+Consumer+BAdI+Interface link for information on the input to the BAdI.
    Kind regards,
    Roland

Maybe you are looking for