Is Sap suitable for tours and travel industries?

It' a good question!
I am interested in knowing if any travel agency is using SAP travel management or not.

Similar Messages

SAP GUI for windows and HTML

Hello,
We have problem running a custom program, when it was integrated as Transactional iView with SAP GUI Type as SAP GUI for HTML.
But, the same program is running fine with SAP GUI Type as SAP GUI for Windows.
Is there any possibility to make some modifications to properties and make the SAP GUI for HTML working.
Thank you.

Hi,
We have a custom ABAP program, where we we can upload data through an excel file.
The xls file can be uploaded from local drive.
So, we have created a Transactional iView with SAP GUI Type as SAP GUI for HTML.
When we try to run the program with an excel file, we are receiving an error message - "Empty input file or input file not found"
Then we have created a Transactional iView with SAP GUI Type as SAP GUI for windows and was successful in uploading the xls file.
Just want to understand, if there is any possibility to make some modifications to properties and make the SAP GUI for HTML working.
Thanks in Advance.

SharePoint 2013 and SAP connectivity / SAP Gateway for Microsoft and Duet Enterprise 2.0

Hello,
we are investigating the connection possibilities of SharePoint 2013 with SAP.
The basic scenario in our cases involves the transfer of documents and/or metadata from SharePoint to SAP possibly through a Workflow in SharePoint.
From my research the most promising official (no 3d-party) interfaces that can be used are the Duet Enterprise 2.0 and the SAP Gateway for Microsoft.
From my understanding both interfaces allow only the consumption of Data from SAP to SharePoint and not vice versa. Moreover the interoperability of documents seems not be supported. Are CRUD operations from a SharePoint native lists to SAP supported?
Can someone please clarify this topics?
I have found lots of documentation concerning the interfaces but not a clear answer to this questions.
Many thanks in advance!
Ioannis

Hi Ioannis,
It seems that there is no built in method to get data from SharePoint list in SAP.
As a workaround, we can export SharePoint list to excel and then use that spread sheet as a source data in SAP.
http://scn.sap.com/thread/3467263
http://scn.sap.com/thread/3472110
As this issue is regarding to SAP, I recommend you to ask the question in the SAP:
http://scn.sap.com/welcome.
More experts will assist you, then you will get more information relation to SAP.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

SAP Cloud For Customer and Gmail Integration

Hi Experts,
Is it possible to integration SAP cloud for customer with Gmail ?
Please share your valuable thoughts on this post.
Many Thanks
Mithun

Hi Mithun,
There is no Add-In for Gmail as we have for Outlook and Lotus Notes in the current release of the system.
You can only integrate Gmail as you do for other email services:
http://scn.sap.com/community/cloud-for-customer/blog/2014/04/14/enabling-ios-push-notifications-on-cloud-for-customer
You can also integrate Gmail via IFTTT to enable iOS Push Notifications:
http://scn.sap.com/community/cloud-for-customer/blog/2014/04/02/guide-how-to-configure-workflow-to-send-email-notifications-and-create-tasks
Hope it helps.
Best Regards,
Cristiano

Need SAP GUI for Mac and process of how to install and configure

Hi Experts,
     I need SAP GUI for Mac. Also please explain the process of how to install, how to configure etc? Please help me.

You can download the SAP Presentation DVD that will have the SAPGUI Java version for OS X. After you install, just run the app from the Application Folder.
For config there are a few options:
1. To connect to a DI directly. After starting the app, click new and under the "Advanced" tab use the following string:
   conn=/H/(hostname)/S/(port / 3200 for instance ID 00)
2. To connect to a login group. After starting the app, open the "Preferences" / Configuration / Messageservers, you need to set a path to a file that has the message servers in the following string
(SID) :     /M/(hostname)/S/(message server port)
Then click "New" and on the first tab you can choose a system and login group.
Hope this helps.
Thank
matt

SAP Scripts for Training and Event Mgt

Dear All
The Following SAP Script ID
HR_ALL_BUCHSUPER
HR_ALL_FIXSUPER
HR_ALL_STORSUPER
HR_ALL_VORMSUPER
HR_TEM_NOTE_DISP
Usually SAP Script in Training and Event Mgt are connected with Output medium through transaction PP40 but the above mentioned is not there .
How to locate and get the same linked PP40 .
Regards
Raji

Hi,
Can you explain your requirement in more detail?
Regards,
Azaz Ali.

Which are the most popular reports in SAP BI for Purchasing and Sales

Hi Experts,
I'm looking to work on one completed BI content flow.
I wanted to work on 1 report from each module to activate the relevant objects.
Can anyone please let me know which reports in Purchasing and Sales are frequently used in SAP BI.
Thanks

Hi,
Please check table - RSRREPDIR
Report names which are related to purchasing - 0PUR_C0N_Q00Y, N and Y indicates number.
same for sales report names - 0SD_C0N_Q00Y .
Query tech names - 0PUR_C01_Q0021
Thanks

"standard" SAP roles for Sales and Operations Planning (SAP SOP)

Hallo,
I´d like to ask SOP specialists, if there are any "standard" SAP roles, which could be created when SOP is implemented into the SAP system.
If not, could you please send me advice, what is (are) the general role(s) for SOP (which SOP transactions and roles)?
Thank you for your effort,
Martin

-->
If you dont have the role --> open OSS
if you dont find it because there are so many:
Good luck :-)

SAP Code for 0CO_PC_ACT_02 and 0CO_PC_ACT_05

Hello Experts,
Is there a way to look at the code by SAP for the standard extractors 0CO_PC_ACT_02 and 0CO_PC_ACT_05?
Thanks
Rishi

Go to RSA3, select the debug mode and execute. It will take you to the Extractor code.
Also you can check RSA2 for datasource specific properties. In that, the extractor for the data source will also be mentioned.
Regards.

What are the AIA pack's needed for Biotechnology and pharma industries

Hello
We have a client in biotechnology & Pharma that needs AIA/PIP's to be installed.
Please suggest if any of them are available
Thanks
Sam

If you have experience in Java development and maybe have used other UI frameworks (using MVC pattern) you should be able to pick up WebDynpro pretty quickly.
There are a lot of articles and tutorials available for CE/BPM. Check out http://www.sdn.sap.com/irj/sdn/nw-ce as a starting point.
Edited by: Christian Loos on Aug 20, 2010 2:59 PM

SAP tables for stock and batch

hi MM guys
I have a requirement to check stock of the material before issuing to Process order. Can anybody pl.tell me the exact table for the stock and batch for that material.
Regards
Laxmikanth

Hi,
Thanks to all.I am getting the stock and batch but my requirement is to check total stock which is available on the day of posting.
Actually in COR6N in PP when they do goods movement even stock is not avilable still system is allowing to post the materials .And in MMBE it is showing negative stocks.
So pl.send the table which can give me total stock on a given date.
Regards
Laxmikanth

How I export from HDV to SD (DVD)... What about HD versions suitable for Macs and Pcs?

Hi,
      I have just finished editing a short movie based on some high res stills combined with some 1080i HDV footage.
   After completing the edit in CS4 (in a HDV 1080i environment) I went through Adobe Media Encoder in order to downsize and converting into an m2v file ready for my Encore project.
   As you probably well know this is far from satisfactory in terms of the down sampling capabities shown by AME as well as the lack of proper colour conversion.
So, after giving up on the Dan Isaacs method, AVI synth didnt seem friendly to this user... as well as the inability of CS4 to frameserve..
My solution was to exported the Microsoft AVI using the HUFFYUV codec at 100% - With Progressive scan, when ever I interlaced my output it showed obvious interlacing in my player, odd or even fields first...
I then used VirtualDub to do the down sizing
Finally Procoder 3 to convert to m2v.
The results still have no proper colour conversion properties but look much sharper than the regular CS4 encode using AME
   OK, that took an eternity to discover and still leaves me with another problem.
I want to export straight from CS4 to media type that can be played on both PC and Macs in HD.
Before I go down another gruop of dead ends and trial and error discoveries, could anyone here suggest a recomended and successful workflow?
   Many thanks,
Phil.

let me see if I can help out a little here.
The problem with converting 1080i to SD in software is that FCP seems to do a not-very-good job of downsampling the image, particularly when you are going directly to DV. Details get blurry, and other compression artifacts become quite noticeable. I have also experienced trouble with the HDV fields not getting processed correctly if I go to SD mpeg directly from an HDV timeline or movie file.
Your best bet is one of the following workflows:
Export a 1080i HDV or AIC movie file and re-import to FCP. Place this clip into an anamorphic SD sequence. It doesn't matter if the sequence is DV or Uncompressed if you send the sequence directly to Compressor from FCP, because this will ignore any rendered material and use an uncompressed image buffer as it encodes the mpeg. Do not letterbox your widescreen video if you are going to DVD - widescreen DVD video should always be full-frame anamorphic.
Your other option is to attempt to use Compressor to down-res the sequence or a self-contained movie of your HDV, starting with one of the advnace format conversion presets in Compressor. However, you'll have to cutstomize the preset by turning on the frame controls, and testing the settings to make sure you are happy with the result. Turning on frame controls will increase the ratio of your encoding time anywhere from 4 to 20:1.
I have tried all of these methods, and none of them look as good as capturing the downconverted video from the deck after mastering to HDV tape.
Hope this helps -
Max Average

New iMac suitable for FCP and/or Avid?

Hi all,
I'm a digital filmmaking student currently using FCP on my MBP (whilst minding my Ps and Qs, OK? LOL).
Next month we'll be learning Avid - no idea if I'll end up buying a copy of that, but it's quite possible.
I'm planning on buying a 24" iMac to also use for video editing, and most likely some music production using Logic Express as well.
I know the iMacs aren't considered "Pro" machines, but I really don't want a Mac Pro (for reasons of space, $$$, etc.).
I don't mind having to wait a bit longer for rendering, etc., but are there any other drawbacks to getting an iMac for this purpose? i.e. issues with the video card or anything...
Also, considering how I'll be using it, would it be worth the extra $500 to get the 2.8 GHz processor? Will there be a very noticeable difference?
TIA for your opinions-
-Dennis

Any of the new iMacs would be fine for FCP or Avid. FCP ran fine on Core Duo machines with a lot less horsepower than the new iMac. Nobody knows how much more powerful the new Core2Extreme is than the 2.4GHz Core2Duo in the base 24" configuration, because Intel hasn't made it generally available yet. If I were you, I'd buy the regular 24" iMac and buy some third party RAM to upgrade to 4GB (should set you back under $200), and get a large external Firewire/USB2 hard drive or two.

Apple Travel Adapter suitable for MBA?

In the Apple Store website, the products listed as suitable for the Apple Travel Adapter Kit includes the MacBook but does not mention the MacBook Air. (The MBA's MagSafe Power Adapter is 45W; the Mac Book's is 60W) Has anyone used any of the Apple adapters with an MBA? I'm going to be in Argentina next February and would like to use mine while there.
Hope someone can help me!
Warewolf

The travel adapter kit is only the detachable plugs that you can swap out on your brick. I have used the travel adapter kit appropriate attachments in Europe and UK and it works perfectly. The brick itself is the "converter" for your MBA. The travel adapter kit is just the interchangeable plugheads.

Error during DatabaseCopy using SAP tools for SQL Server (v7.12)

I'm trying to perform a system copy from PRD to QAS. The database has been mounted to QAS via detach and attach method. I did a DBCC on the database and everything looks OK. I'm running SAPINST (SAP Tools for MSSQL) and selecting the Database Copy option. The source database has a schema of DBO. Both PRD and QAS are running SAP 4.7/Basis 620. The target schema is QAS. SAPINST fails in step 2 (Define Params) with:
"This service cannot be used for a system with SAP ABAP release 620"
Is this message misleading? Has anyone receive this message before.
UPDATE:
I donwloaded the latest version of SAP Tools for MSSQL and now it failes during the execution phase on step, "Convert DB objects to new schema".
Here is the log:
Process environment
===================
Environment Variables
=====================
=::=::\
=C:=C:\Program Files\sapinst_instdir\MSS\CPY
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\r3tadm.STAG\Application Data
CLIENTNAME=TRAIMONOTEBOOK
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=STAG
ComSpec=C:\WINDOWS\system32\cmd.exe
DBMS_TYPE=MSS
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\r3tadm.STAG
LOGONSERVER=
STAG
MSSQL_DBNAME=R3T
MSSQL_SERVER=stag
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Dell\SysMgt\RAC5;C:\Program Files\Dell\SysMgt\oma\bin;C:\Program Files\Dell\SysMgt\oma\oldiags\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\usr\sap\R3T\SYS\exe\run
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 6, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f06
ProgramFiles=C:\Program Files
SAPINST_EXEDIR_CD=C:/STM/I386
SAPINST_JRE_HOME=C:/WINDOWS/TEMP/3/sapinst_exe.3012.1234409473/jre
SAPLOCALHOST=stag
SESSIONNAME=RDP-Tcp#25
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\WINDOWS\TEMP\3
TMP=C:\WINDOWS\TEMP\3
USERDOMAIN=STAG
USERNAME=r3tadm
USERPROFILE=C:\Documents and Settings\r3tadm.STAG
windir=C:\WINDOWS
User: STAG\r3tadm, Id: S-1-5-21-2727398557-1322528747-1943968026-1019
Working directory: C:/Program Files/sapinst_instdir/MSS/CPY
Current access token
====================
Could not get thread token. Last error: 1008. I assume that no thread token exists.
Got process token.
Privileges:
Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
Privilege SeUndockPrivilege, display name: Remove computer from docking station, not enabled.
Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, not enabled.
Privilege SeManageVolumePrivilege, display name: Perform volume maintenance tasks, not enabled.
Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
Groups:
Group count: 14
\LOCAL S-1-2-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Administrators S-1-5-32-544 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_OWNER
\Everyone S-1-1-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Users S-1-5-32-545 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_R3T_LocalAdmin S-1-5-21-2727398557-1322528747-1943968026-1021 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_LocalAdmin S-1-5-21-2727398557-1322528747-1943968026-1023 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\None S-1-5-21-2727398557-1322528747-1943968026-513 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\INTERACTIVE S-1-5-4 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\NTLM Authentication S-1-5-64-10 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\Authenticated Users S-1-5-11 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
\ S-1-5-5-0-36828865 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_LOGON_ID
NT AUTHORITY\REMOTE INTERACTIVE LOGON S-1-5-14 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\This Organization S-1-5-15 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_R3T_GlobalAdmin S-1-5-21-2727398557-1322528747-1943968026-1018 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
ERROR 2009-02-11 19:31:46.529 [sixxcstepexecute.cpp:984]
FCO-00011 The step MoveSchema with step key |SAPMSSTOOLS|ind|ind|ind|ind|0|0|MssSysCopy|ind|ind|ind|ind|4|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
TRACE 2009-02-11 19:31:46.544
Call block:CallBackInCaseOfAnErrorDuringStepExecution
 function:CallTheLogInquirer
is validator: true
WARNING 2009-02-11 19:31:46.544 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2009-02-11 19:31:46.544 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
TRACE 2009-02-11 19:31:46.544
A problem occurs during execution the inquirer callback. SAPinst will switch back to the standard behaiviour.
TRACE 2009-02-11 19:31:46.544 [iaxxgenimp.cpp:707]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service SAP Toools for MS SQL Server > Database Copy. You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY. </body></html>
TRACE 2009-02-11 19:31:46.544 [iaxxgenimp.cpp:1245]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Edited by: Tony Raimo on Feb 12, 2009 4:37 AM

This is looks like permission issue on source folder
Copy source in to your local drive and try again.
I had same issue and able to resolve after copy EXP1 EXP2 and EXP3 folder in to local drive C: with Everyone full access
Yogesh

Is Sap suitable for tours and travel industries?

Similar Messages

Maybe you are looking for