Is Scanjet G3110 supported in Windows 10?

Anyone using Scanjet G3110 on Windows 10?
Any problems?
Can't get clear answer from HP on whether or not it is supported.
Just get scripted reply that send me to links that don't answer the question.

Welcome to the HP Community , I understand you are looking to find out if the Scanjet G3110 is supported on Windows 10. Although I cannot find any sort of confirmation that it is supported, the best you can do is try installing the Windows 8.1 driver, to see if that works. Click this link, click "Edit" on the right side of the page to change the OS to Windows 8.1, and download the full driver there. HP Scanjet Full Feature Software and Driver Good luck

Similar Messages

HP scanjet G3110 in windows 7 64 bit, XP mode (Twain Driver)

Hallo
I have just installed my "HP scanjet G3110" windows 7 64 bit, I have installed CorelDraw in XP mode and it work OK. When I try to scan an image I get a popup saying: "Could not find a Twain driver that matches the function of the application"
Can some one please tell how can I get the scnner to work in XP mode?
regards
kesart

Hello @kesart,
Thank you for visiting the HP Support Forums! I see you are running into some problems with your HP ScanjetG3110, and your Corel program, you get an error 'Could not find a Twain driver that matches the function of the application'. I would like you to try the following the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstalling the Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /regserver, and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
Restart the computer
Download and install the software for your Scanjet again; setup_full_G3110_14-5.exe
I will watch for your reply, please keep me posted.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Setting up Scanjet G3110 to scan on a Windows 8.1 operatinig system

Downloaded driver to run the scanjet g3110 scanner. Scanner is not operatiing. What does it take to get this scanner operating?

Welcome to the forums wterpy
I understand your Scanjet G3110 is no longer working for you. I would first like you to see the guide below to see if the steps will help. If the steps do not help, please respond with some more information about the problem, for example, are you seeing error messages, did the installation complete successfully? Is the device powering on, etc.
Scanner has stopped working properly
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Scanjet G3110 top-deck buttons don't work on Win 7 Pro 64-bit

Scanjet G3110
Windows 7 Pro SP1 64-bit
Downloaded and installed new drivers (2014-01-15 , Version14.5). Scanner works, but the top-deck buttons don't.
No errors or warnings either during installation or while trying to use the scanner, but in the Application Event Log, I see two entries from MsiInstaller, in the order they occurred:
Product: hpg3110 -- Error 1904.Module C:\Program Files (x86)\Common Files\Hewlett-Packard\Scanjet\DriverStore\hpgtg311.dll failed to register. HRESULT -2147220473. Contact your support personnel.
Product: hpg3110 -- Error 1905.Module C:\Program Files (x86)\Common Files\Hewlett-Packard\Scanjet\DriverStore\hpgtg311.dll failed to unregister. HRESULT -2147220472. Contact your support personnel.
No idea if this is related or even important.

Well, I know why the buttons don't work, but I still don't know what a real fix would be.
The Windows Image Acquisition service starts at boot time as it should (its startup type is set to "Automatic") but then stops after about 5 minutes. When it's not running, the buttons don't work.
If I start the service again, the buttons will work. It appears that once I've started the service manually, it will continue to run until the machine's shut down.

Scanning software for ScanJet G3110 not installing

I have downloaded the latest version of the recommended software directly from the HP support site. OS is Win7 64 bit. The setup ends in few instants with no error messages but I have not desktop shortcut icons. The setup creates folder: "C:\Program Files (x86)\HP\" with just two subfolders: "Temp" and "Digital Imaging". Inside Digital Imaging folders I can't found many application files and there isn't the \bin\hpqkygrp.exe application.
On a pc with windows VISTA and default CD installer evertything works fine.
I noticed that many files missing from setup, like Common folder. The pc is in a network domain and I launched the setup as both domain user and domain administrator.
I tried many times in different days/months/updates... please help.
This question was solved.
View Solution.

Hi @MauroRulli
I would like to help you with the software troubles you are having. Please try the following steps;
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstalling the Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /regserver, and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
Restart the computer
Download and install the software for your Scanjet again. HP Scanjet G3110 Full Feature Software and Driver
Please let me know the outcome of your efforts. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

ScanJet N6010 Issues With Windows 7/8.1

Hi, I'm trying to install a ScanJet N6010 on a Windows 7 PC but it seems to be having a bit of trouble! Pressing the Scan To PDF button on the front pops up a window on the PC but not the correct one for scanning to PDF. Going into the 'HP Scanner Tools Utility' to configure the buttons doesn't seem to work either - the window loads but the four drop down menus (for each button) are empty, no values can be selected.
Screenshot:
I've also tried this on a Windows 8.1 PC with the same result. Plugging it back into the original PC (which is also Windows 7 x64) and it works and the drop downs are also populated!
Is there anything I can try? According to the support matrix it's still a device that's supported by HP within Windows 7.
Thanks
Andy

i would suggest a system refresh. that happened to me as well and the refresh sorted it. A lot of gremlins seem to appear on windows 8.1 at first. but yes try a system refresh. and it should help. Waylen Watts

Scanjet G3110."The system cannot find the path specified" when trying to import.

scans fine but won't import.
This question was solved.
View Solution.

Hi @lynn22233 ,
I see that you are having issues importing the scans. I will do my best to assist you with this issue.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
I would uninstall and reinstall the scanner if you are still having issues.
HP Scanjet G3110 Photo Scanner Drivers.
Select your operating system, click next and click on the software to download and install.
What operating system are you using?
How to Find the Windows Edition and Version on Your Computer.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

No drivers for scanjet 4570c scanner for windows 8x

no drivers for scanjet 4570c scanner for windows 8x
Sure, it's old- but, many PC accessories last a long time. This old scanner is working perfectly. I shouldn't have to junk it because HP, a multi billion dollar company doesn't want us to continue to use old accessories. I used to program- I know that it wouldn't be that big a deal to update the drivers for this old scanner to work on windows 8x.
A nation that prematurely throws out resources is a nation that will soon be second rate.
Joe

You need to provide Win7 with device drivers for all the Mac-specific hardware, just like when you tried out BootCamp. In order to do so, use the BootCamp Assistant to download the latest Windows drivers and place them on media the Win7 installer can use.
Run BootCamp Assistant, click Continue to skip initial screen. Check the Download latest Windows support... box, uncheck all others. Click Continue. Select to burn to a DVD/CD or store in an external drive (USB Flash?). Click Continue. Allow the disk image to download, may take awhile. Burn or copy the image onto media, as per your previous choice. Then, when the Win7 installer says there are no drivers, use the media you prepared to install them.
Note that the above explanation is when using the diskless world of Lion. If you are using Snow Leopard, there should be a BootCamp disk you can use and not have to wait.

HP- scanjet G3110

I installed the new CD from Hewlett/Packard for the HP-scanjet G3110 (L2698-10008) for Windows 7 OS, but do not have an icon/shortcut or anyway to get in and use the scanning program. The computer says that it's installed and functioning properly but I'm still unable to use it.

Hello herb430 Welcome to the forums!
I saw your post about how you have ran the installation CD for your Scanjet G3110 however, you do not see an icon on your desktop to use the scanner.
I would suggest trying the online download to see if that will install the scanner properly.
HP Scanjet Full Feature Software and Driver
Here is a guide for you if you run into installation issues: Scanner installation troubleshooting
Enjoy your Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Is office 2010 officially supported on windows server 2012 R2

hello,
can someone tell me if office 2010 is officially supported on windows server 2012 R2 RDS?
This link only talks about Windows server 2012 not R2.
Thanks in advance.
Regards
Anthony

Hi Anthony,
I successfully installed Microsoft Office Professional Plus 2010 on Windows Server 2012 R2 before in my testing environment.
So yes, Office 2010 is supported on Windows Server 2012 R2.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Is Exchange 2010 supported on Windows Server 2012 R2?

According to the
Understanding Exchange 2007 upgrade prerequisites, https://technet.microsoft.com/en-US/Library/ee958305
these are the supported windows operating systems
64-bit edition of Windows Server 2008 Standard Service Pack 2
64-bit edition of Windows Server 2008 Enterprise Service Pack 2
64-bit edition of Windows Server 2008 Standard R2
64-bit edition of Windows Server 2008 Enterprise R2
has this list been
upgraded to include Windows server 2012 R2?? I am planning to migrate my Exchange 2007 server to 2010.
I have a downgrade license to 2008 STD R2, so i am wondering if i will have to downgrade the OS.
Thanks
B
Bobby

It's supported on Windows Server 2012 but NOT R2
https://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx

Is SharePoint 2010 Supported on Windows 2012 R2

Hi
I have read Trevor Seward's responses to various questions on this subject :-
http://social.technet.microsoft.com/Forums/en-US/ad4e17ee-83de-41d6-a974-244ceccb8a63/is-sharepoint-2010-sp1-is-supported-by-windows-server-2012-currently-i-have-os-version-of-server?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/en-US/e7539d34-aaa2-4d9c-a44c-e65d388d8944/support-for-sharepoint-foundation-2010-on-windows-server-2012-r2?forum=sharepointadminprevious
However, we have a farm which is currently SP2010 SP1 which we are about to upgrade to SP2010 SP2 running on Windows Server 2008R2 and SQL Server 2008 R2. So the farm is currently not supported by Microsoft.
We are now looking to upgrade this farm to SP2013 SP1 running Windows Server 2012 R2 and SQL Server 2012.
We plan to start this process of by upgrading Windows Server 2008 R2 to Windows Server 2012 R2.
Will SharePoint 2010 SP2 run on Windows 2012 R2 (or will we need Windows 2012) ?
Once Server 2012 R2 (or Server 2012) is up and running, we will upgrade SP2010 SP2 to Sp2013 SP1.
Finally upgrade SQL Server 2008R2 to SQL Server 2012.
So the part I don't know is will SharePoint 2010 SP2 run on Windows 2012 R2 or Windows 2012 ?
Thanks
Nigel
Nigel Price NJPEnterprises

Not a question for the Windows Server people. This is a question for the SharePoint people. You may want to try asking in a SharePoint forum like
http://social.technet.microsoft.com/Forums/en-US/home?forum=sharepointadminprevious
. : | : . : | : . tim

C00D118E: You device is using an outdated driver that is no longer supported by Windows Media Player

Hi,
I have Treo Pro trying to sync with my library in WMP 11... I'm getting error "C00D118E: You device is using an outdated driver that is no longer supported by Windows Media Player"... Tried to install pTune with no luck... Tried to Google it with no luck...
Connecting the other device "i-mate Ultimate 9502" with no issues even using same memory cardin Palm Treo Pro...
My temporary solution is to put the memory card in the 9502, sync my multimedia files and then reinsert it in Treo Pro... You help is highly needed and appreciated...
Abutaleb
Post relates to: Treo Pro T850U (Unlocked)

I have searched the internet and have found the following regarding your issue.
http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5145&id=C...
Try using the steps in the article to see if you can resolve the issue.
Post relates to: Palm i705

Hp laserjet 1022 = this printer is not supported under windows 7 shares?

hp laserjet 1022 => this printer is not supported under windows 7 shares?

Yes I understand, but this printer is not installed on a network share. Always remain sown printing in the print queue. Consequently, I ask if you can type HP 1022 printer in Windows 7 share?

Level of local SQLCE/other DB support in windows phone 8.1/using linq to sql from dll?

I have had a mixed opinion for SQLCE support in windows phone 8/8.1. Is their still support for a local SQLCE or other database in windows phone 8.1? (A lot of different blog articles created their own handlers it appears and one used
an visual studio app called SQLmetal) I am hoping to at least figure out the libraries to use for Linq to SQL in windows phone 8.1 in order to access a local Database. I only need to retrieve data from a simple Database with one -
two tables and one of the tables has three fields.
I wish to access the local DB from a dll file even if I have to use Linq to SQL. The reason for this is to store data for a simple game while the app is running. However, I may need to send data to the database and would like to separate that
from the main application if possible. The only other question is: how do I add local database support to a dll file in windows phone 8.1? (This is my main objective but I need to know my database options first)
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - "Sherlock holmes" "speak softly and carry a big stick" - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering
- Yoda. Blog - http://www.computerprofessions.co.nr

Windows Phone Silverlight 8.1 apps can still use LINQ to SQL (System.Data.Linq) see:
http://msdn.microsoft.com/en-us/library/windows/apps/hh202860(v=vs.105).aspx
For Windows Phone 8.1 [runtime] app you would need to use an external library like
SQLite
There is a jumpstart training talk on using SQLite in Windows Phone 8.1 apps here:
http://channel9.msdn.com/Series/Building-Apps-for-Windows-Phone-8-1/19
I'm not sure what you mean by: "...access the local DB from a dll file..." Do you mean you want the library used to access the database to be portable across
platforms?
Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
your votes for existing suggestions.
I saw the first link and I think I have already been through some of that tutorial on channel 9 already.
I'm not sure what you mean by: "...access the local DB from a dll file..." Do you mean you want the library used to access the database to be portable across platforms?
This would be a yes. I need use it to submit an application to the store (I wish to have the data and business logic in the dll file while having the GUI separate). I am currently using the portable dll but if you think using another dll type would help
I will try that. I am a VB.NET programmer and so I can see where some programmers get their worries about SQLCE (It seems a lot of VB and VB.NET programmers like it from my time helping on the VB.NET forums second to SQL Server only).
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - "Sherlock holmes" "speak softly and carry a big stick" - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering
- Yoda. Blog - http://www.computerprofessions.co.nr
Nevermind, I changed the dll type to "Silverlight" and I can use the System.Data.Linq reference at least.
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - "Sherlock holmes" "speak softly and carry a big stick" - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to
suffering - Yoda. Blog - http://www.computerprofessions.co.nr

Is Scanjet G3110 supported in Windows 10?

Similar Messages

Maybe you are looking for