Is sessionnumber generated in the Hyperion Essbase Server is unque?

Hi All,
Is sessionnumber generated in the Hyperion Essbase Server is unque? how to get the session number in the CBS file? What is the code to get the Session number in Essbase Integration Services Shell?
Regards
Shakti

The windows service for essbase in 11.1.2.x is an OPMN service "Oracle Process Manager..."
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Hyperion essbase server installation problem

I had a problem while installing hyperion essbase. In the essbase server, I entered a username and while doing administrative configuration utility, I was asked to enter these details and when I entered it says that the information was incorrect. I tried several times but it was locked I guess. So, please help me how to change the user name and the pass word in the essbase server so that I can run the configuration utility with no problems?
Thanks in advance
Tejaswani

You might get a better/faster response in the Hyperion forum at Hyperion EPM
Srini

Monitoring the Hyperion Essbase Database through OEM.

Hi DBAs,
I have setup the Hyperion Planning application (on windows 2003 server 64bit) with Essbase DB and Oracle (10.2.0.3) RDBMS (on Linux 5.3 64bit). I want to monitor the Planning Applicatoin and Essbase DB through OEM Grid Control. I have already installed the agent on Windows and Linux Server. Only able to monitor the Oracle RDBMS.
Can someone guide me how I can monitor the Essbase DB? Also how can I setup the Hyperion Planning Application with OEM ?
Thanks
-Samar-

See the below link
http://www.oracle.com/technology/products/bi/epm/pdf/sys9_oem_integration.pdf
It may help,
Regards,
http://www.oracleracexpert.com
Click here to [Send EMAIL using UTL_MAIL in Oracle 10g |http://www.oracleracexpert.com/2009/11/send-email-using-utlmail-in-oracle-10g.html]
Click here for [Backup and Restore SPFILE and PFILE|http://www.oracleracexpert.com/2009/11/oracle-spfile-and-pfile.html]

Using the Hyperion (Essbase) Objects 6.5 Base Classes

Hi all,I am using Hyperion (Essbase) Objects 6.5 to report from an Essbase 6.5.3 database. Using the sample report.asp page as a guide, I want to use the "EssProperties" class to change the Essbase options for missing values and using aliases, however there no effect on the results returned when setting these properties.Has anyone out there had any success?

You need to set the EssProperties class you created into the EssOperations class:set oEssOperations.EssProperties = <your property class instance>Alternatively, you can modify, in place, the instance of EssProperties that EssOperations already has:with oEssOperations.EssProperties .MissingTextString = "Boo!" .UseAliases = trueend withThink of the Essbase Objects Base Classes sort of as a molecule.. The 'basic atom' of the molecule is the EssOperations class (which contains the normal retrieve/zoom/pivot type of operations). Attached to the 'basic atom' are the things that are needed for a successful operation.. First, a connection (the EssConnection object) is 'plugged into' the molecule. Next, properties (an EssProperties object) is plugged in.. Finally, you need a grid to display it on so you plug in a grid object (or, more technically, one of the components that implement the IEssGrid interface).Once you have all of the 'atoms' of the grid plugged in, you have everything you need to do a successful operation.Tim TowApplied OLAP, Inc

Installing Hyperion Essbase on linux 64 bit

Hi all,
I'm new to Hyperion Technology. What are the zip files I have to download for installing Hyperion Essbase on linux 64 bit.
Thanks and Regards
Sai

Hi John,
Totally I'm having four machines (Machine A,Machine B,Machine C,Machine D). With the help of these four machines I'm going to install Hyperion Essbase and Planning 11.1.2.1.0.
Machine A (Linux-64 bit) ----> I have planned to install and configure the Hyperion Essbase Server,EAS Console.
Machine B (Linux-64 bit) ----> I have planned to install and configure the Oracle Database.
Machine C (Windows-64 bit) ----> I have planned to install and configure Hyperion Planning.
Machine D (Windows-32 bit) ----> I have planned to install and configure Hyperion Essbase Client.
In my 3 machines i have 64-bit, and 1 has 32 bit, I do not know this would be working, if this is correct kindly tell me how to do.
Thanks and Regards
Sai

How to do configuration the Essbase server with shared services

We install Hyperion 11.1.2, we install Hyperion Essbase server and planning on UNIX box (64-bit) and FR Report, Essbase administration services and foundation services on windows 2008 (64-bit) server.
When I am doing the configuration on windows server it’s not asking anywhere Essbase server details.
How to do configuration with Essbase server and planning where these are on Unix box and foundation services are on windows server.
Help me !
Thanks
Dharm

I did the install as PTH0RC and my inventory.xml is configured correctly, but I get the following message trying to run a simple view
C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance>epmsys_registry view
com.hyperion.hit.registry.exceptions.RegistryException: reg.properties not configured.
at com.hyperion.hit.registry.Registry.getInstance(Registry.java:338)
at com.hyperion.hit.registry.regedit.RegEditUtility.main(RegEditUtility.java:101)
An error occured during the operation. Detailed Message is - reg.properties notconfigured.

Cannot add a New Essbase server into the EAS Console

Hi can someone assist me...........
I have installed Essbase on a new / additional server (that all went rather well, its not hard just pressing NEXT, NEXT, NEXT).
I then used a essadmin account to configure, i have to say its not the same as the other essbase server (so i am wondering if this was the start of my problems)!!. I did not use the same essadmin as the password is unknown its not known and the orginal installation was not recorded. I do however know and used the admin account for the shared services.
I then logged into EAS Console (single instance of the EAS, with a plan to add 3 new essbase servers to this console over the next couple of days.) i added the new essbase server, then externalised and all was happy with the world. SUCCESS :-)
I closed EAS, and went back in and thats where the fun started, it then stated that it could not connect and i recieved the invalid login message in essbase. I have read some forums and followed the advise of going into Shared Services and manually removing the new essbase server registry under projects, cleared down and replaced the essbase.sec file etc etc to the originals and stop/started the services.
So can anyone help on what my next steps should be?, I don't want to run off and re-register again via the console for shared services if i need to use the original essadmin password in my configuration. Any help will be gratefully recieved.

Hi can someone assist me...........
I have installed Essbase on a new / additional server (that all went rather well, its not hard just pressing NEXT, NEXT, NEXT).
I then used a essadmin account to configure, i have to say its not the same as the other essbase server (so i am wondering if this was the start of my problems)!!. I did not use the same essadmin as the password is unknown its not known and the orginal installation was not recorded. I do however know and used the admin account for the shared services.
I then logged into EAS Console (single instance of the EAS, with a plan to add 3 new essbase servers to this console over the next couple of days.) i added the new essbase server, then externalised and all was happy with the world. SUCCESS :-)
I closed EAS, and went back in and thats where the fun started, it then stated that it could not connect and i recieved the invalid login message in essbase. I have read some forums and followed the advise of going into Shared Services and manually removing the new essbase server registry under projects, cleared down and replaced the essbase.sec file etc etc to the originals and stop/started the services.
So can anyone help on what my next steps should be?, I don't want to run off and re-register again via the console for shared services if i need to use the original essadmin password in my configuration. Any help will be gratefully recieved.

Creating a new Essbase Cluster on the same Solaris server

Hi All,
I have two servers:
Server1: Foundation services, APS, EAS
Server2: Essbase Server, Essbase Studio Server on epminstance_1
Due to business requirements I need to "rename" the Essbase cluster from "EssbaseCluster-1" to something else.. I know this is not possible and from the below document I understand that I need to create a new instance on Server2 and configure Essbase and Essbase Studio on it.
"How to Rename Essbase Cluster (Doc ID 1434439.1)"
Goal: In EPM System Release 11.1.2.x, is it possible to rename the Essbase instance and cluster names after they are configured?
Solution: No, it is not possible to rename the Essbase cluster or instance names after the initial configuration. If you need to change the instance and cluster names, create new instance and cluster. Export the applications from the old cluster and import them into the new cluster.
My doubt lies with configuring the 2nd Essbase server as I am not clear how a single environment with two Essbase standalone instances on the same physical Solaris server, with each belonging to their own cluster will behave. I know that they are independent clusters and the concept of active/passive and active/active clusters are for Essbase instances part of the same cluster.
I plan to create a new epminstance_2 instance on Server2 and configure the 2nd Essbase server as follows: give it a *new* cluster name and not assign it to the existing Essbase cluster and deploy it in standalone mode.
1. Now I plan to use the 1st instance only as a backup option.. In an event where for some reason the new instance were to fail I would start up the services on the older essbase instance. Is this possible without any additional configuration or changes to OPMN?
2. Alternatively, say we want to remove the older instance. Kindly suggest ways in which I can safely "remove" the older cluster (other than uninstalling). Also when users log in using SmartView, they would see the older and new cluster.. Is there anyways I can get rid of the older cluster without having to uninstall everthing on Server2 and start fresh?
Thanks!

Thanks John!
I have a doubt which I hope you can throw some light now..
I created a new instance and configured Essbase Server and Studio server on it. So now I have two EPM instances on the same physical server both having Essbase server and Essbase studio server - both Essbase servers belong to different Essbase clusters. Now from the EPM docs I do not find any mention that we can or cannot have multiple instances of Essbase Studio on the same server. Kindly correct me if I am wrong..
In the deployment report I see two identical entries for the Essbase Studio server in the older epminstance but I do not see Essbase Studio of the 2nd Instance.
epmsystem_1 (Server2)
Essbase Studio Server - 9080
epmsystem_1 (Server2)
Essbase Studio Server - 9080
After I start up the 2nd Essbase Studio server I tried connecting to it from Essbase Studio Console and got the error "Read permission denied to object folder:\'system'."
Similarly when I run start_BPMS_bpms1_CommandLineClient.sh and issue the reinit command I get the same error.
So I stopped the 2nd Essbase Studio server on epmsystem_2 and started up the first Essbase Studio server on epmsystem_1. I was able to connect to it fine from Essbase Studio console and reinit worked too.. I ran a drill through report which worked fine.
-> So is it that we can have only one instance of Essbase Studio on a single server?
Also say I want to use the Essbase Studio on the 2nd instance.. Could I re-configure just Essbase server on epmsystem_1 and re-configure Essbase server and Essbase studio server on epmsystem_2 ?
Thanks,
Kent

Is Hyperion Essbase is working with ODI 11g under different Domain Range?

Hi All,
I installed ODI 11.1.1.3 with IP(172.x.8.21) and Hyperion Essbase (172.x.0.36). With different domain Range ODI(172.x.*8*.21) and Essbase(172.x.*0*.21) so will it work under different IP Domain ranges from 8 to 0?
Cause i was trying to develop Physical Data server for Essbase and i was not able to view Application Schema and other object in drop down list like: Catalog, Database Scheam etc.
Evening i am providing Correct Domain name, port and user name & passowrd. even i tried with providing direct IP address.
Server Details :
1- Hyperion Essbase server Name: Essbaseserver
2- Port: 1423
3- admin
4- xxxxxx
as u know guys Test Connection button is not working for Essbase its only works for RDBMS in ODI.
looking for your help.
Thank u

Yes it works though the dropdown will not be automatically populated and you can't click the test button as that is mainly for technologies that use JDBC, you will need to manually enter the app/db
Cheers
John
http://john-goodwin.blogspot.com/

Issues with Essbase Server configuration

Hi All,
- I have a simple environment with one foundation server with only foundation services running on it (only foundation components installed). On the single Essbase server, I have installed foundation (by default) and Essbase components.
- I'm facing an issue with the Essbase server configuration. All steps complete except for the last step: Deploying the web applications (APS and EAS) to the WebLogic server.
- FYI, I am deploying the web application to the existing domain created on the Foundation server. As all products need to be on the same domain..
During deploying, the WebLogic admin server reports the following error:
BEA-149003
Unable to access application source information in /opt/shared/apps/hyperion/Oracle/Middleware/EPMSystem11R1/products/Essbase/eas/server/AppServer/InstallableApps/Common/aps.ear for application ‘APS’.
The specified error is: No application files exist.
Now the above path and files exist on the Essbase server but not on the Foundation server. So after playing around with the WL admin console and reading Sandeep's post[1], I have come to the conclusion that:
1. The Essabase components have to be installed on the Essbase server, but not configured.
Now this implies that I need to install all components on the foundation server even though I will only be using it to deploy the foundation services which seems a bit silly?
2. Create a new domain on the Essbase server, so the EAS/APS will be deployed on the Essbase server - but won't be on the same domain as the other products.
Well I'm a newbie with WebLogic and would thus appreciate your valuable inputs!
Thanks in advance...
References:
[1]. http://sandeepseshan.blogspot.in/2009/02/weblogic-server-10-deployment-error.html

From the configuration docs -
"On the machine on which you plan to administer the WebLogic Server, you must install all Web applications for all applications you plan to deploy on any machine in the environment. (The WebLogic Administration Server is installed and deployed on the Foundation Services machine.)"
You shouldn't need to create a new domain for deploying on other servers and can use the existing one and only deploy the web applications on the servers you want them running on.
I am not sure which version you are installing but if it is 11.1.2.1 then I take it the OS is the same type on both machines
"All Web applications in an EPM System deployment must be deployed on either windows machines or on all UNIX machines."
There note has doesnt seem to be there in 11.1.2.2 so I assume it is not the rule anymore.
Cheers
John
http://john-goodwin.blogspot.com/

Accessing remove EJBs while debugging using the Embedded Application Server

I'm trying to configure to debug a multi-tier application (servlets + EJBs) where a servlet accesses EJBs set up on a second OC4J application server. I've set up rmi.xml in the embedded application server to reference my second application server by adding the line.
<server host="127.0.0.1" username="admin" port="23791" password="password"/>
When I run the embedded application server it seems to hang, with the stack in
the following state:
OC4J main()
OC4J launchOC4JCommandLine()
ApplicationServer launchCommandLine()
Thread join()
Thread join(0)
Object wait(0)
The following exception is generated on the second application server
C:\Program Files\Oracle\JDeveloper9i\j2ee\home>java -jar oc4j.jar
Oracle9iAS (9.0.2.0.0) Containers for J2EE initialized
java.lang.NullPointerException
java.lang.ClassLoader com.evermind.server.rmi.RMIInputStream.getClassLoa
der()
java.lang.Class com.evermind.server.rmi.RMIInputStream.resolveClass(java
.io.ObjectStreamClass)
java.io.ObjectStreamClass java.io.ObjectInputStream.inputClassDescriptor
java.lang.Object java.io.ObjectInputStream.readObject(boolean)
java.lang.Object java.io.ObjectInputStream.readObject()
int java.io.ObjectInputStream.inputObject(boolean)
java.lang.Object java.io.ObjectInputStream.readObject(boolean)
java.lang.Object java.io.ObjectInputStream.readObject()
void com.evermind.server.rmi.RMIConnection.handleBindObject()
void com.evermind.server.rmi.RMIConnection.run()
void com.evermind.util.ThreadPoolThread.run()
Has anyone got any ideas what is happening here and how I can fix it?
Thanks,
Mark.

This is an OC4J question. Try posting your message to the Products > Application Server > J2EE forum. Someone there should be able to answer your question.

Accessing remote EJBs while debugging using the Embedded Application Server

I'm trying to configure to debug a multi-tier application (servlets + EJBs) where a servlet accesses EJBs set up on a second OC4J application server. I've set up rmi.xml in the embedded application server to reference my second application server by adding the line.
<server host="127.0.0.1" username="admin" port="23791" password="password"/>
When I run the embedded application server it seems to hang, with the stack in
the following state:
OC4J main()
OC4J launchOC4JCommandLine()
ApplicationServer launchCommandLine()
Thread join()
Thread join(0)
Object wait(0)
The following exception is generated on the second application server
C:\Program Files\Oracle\JDeveloper9i\j2ee\home>java -jar oc4j.jar
Oracle9iAS (9.0.2.0.0) Containers for J2EE initialized
java.lang.NullPointerException
java.lang.ClassLoader com.evermind.server.rmi.RMIInputStream.getClassLoa
der()
java.lang.Class com.evermind.server.rmi.RMIInputStream.resolveClass(java
.io.ObjectStreamClass)
java.io.ObjectStreamClass java.io.ObjectInputStream.inputClassDescriptor
java.lang.Object java.io.ObjectInputStream.readObject(boolean)
java.lang.Object java.io.ObjectInputStream.readObject()
int java.io.ObjectInputStream.inputObject(boolean)
java.lang.Object java.io.ObjectInputStream.readObject(boolean)
java.lang.Object java.io.ObjectInputStream.readObject()
void com.evermind.server.rmi.RMIConnection.handleBindObject()
void com.evermind.server.rmi.RMIConnection.run()
void com.evermind.util.ThreadPoolThread.run()
Has anyone got any ideas what is happening here and how I can fix it?
Thanks,
Mark.

This is an OC4J question. Try posting your message to the Products > Application Server > J2EE forum. Someone there should be able to answer your question.

Adding of essbase server .

The new essbase installation is done in the new server on windows.
The installation is successful.
so was trying to add the new essbase server in the old server ,but getting this error while adding the server "Network error {10060} Unable to connect to new server name . The client timed out waiting to conect to Essbase Agent using TCP/IP.
I tried adding the essbase server using the ip address ,what else i can try ,
How to solve this issue

Have you not already asked the same question? - In the old server ,not able to add the New server Name.Under the new server name ,the applications are not coming .Gett…
Cheers
John
http://john-goodwin.bogspot.com/

Unable to login into Essbase server

Hi all,
I have installed Shared services and Essbase, I did "Externalize Users" in Essbase. It happened successfully. My understanding on this Externalize user is
"Essbase runs in Shared Services mode and in this mode Essbase create, Edit User permission becomes obsolete. You must be an Essbase administrator to manage users, and you must additionally be a Shared Services administrator to manage users from Shared Services"
Is this correct please validate. If this is correct, then if you change the password in shared services and sync the native directory in shared services, Essbase should work with new password but this is not happening when i try to connect the Essbase server it is throwing the below error.
"Error: 1051293: Login fails due to invalid login credentials"
Is there any other activity that has to be done in this process. I dont have clear idea on this Externalize users can any one explain.
Can any one help me in this urgent issue.
Regards,
Ramachandran J

Hi All,
Thanks for the reply. I have few more doubts.
At the time of configuring the Shared services the default login will be admin and password. But when i configure the Essbase with Shared services in Configuration Utility i had given the different user name as "essadmin".
So i have followed the following steps to do Externalize users in Essbase:-
1. Just created the same "essadmin" user in shared services
2. Done externalize users in Administration services first inside Essbase console, while doing that i have given my own password.
3. Then went into the specific Essbase server and right clicked security and externalized users there, here also while doing that i have given my own password.
By doing this step externalize users worked successfully and i can sink the user with shared services.
Can you let me know whether the above steps are correct or any other procedure is available??
And i have one more doubt....
Once externalize users has been done, all the essbase sample database and Analytic services got migrated to Shared services. Then i have created new planning application which reflected in both essbase and shared services.
Then i loged into shared services and created a new user, then granted only one specific sample application and planning application to that user and sinc with database and also i loged into planning application and refreshed database.
Then i logged into essbase with the newely created username and password... but i noticed that there is no Essbase server available with the new user login. So i added the same essbase server with "external authentation" ticked.
Once this is done all the availble application appeared in his login, Here it has Not restricted only to the applicaiton which i have given access to that user, it is showing all the application and also allowing to edit the application.
I just want to restrict a particular application to one particular user to edit the outline in essbase and this has to be acheived by giving access restriction in shared services.... now i am unable to acheive the same. Can any one help me in doing so???
Regards,
Ramachandran J

Hyperion Essbase 11.1.2 active/passive Clustering

Hello,
Has anyone successfully clustered Essbase 11.1.2 in an active/passive configuration? If yes, I have a few questions as I do not believe that the documentation is very clear on a few critical areas. I have already installed and configured Essbase on the first server and set the cluster name to EssbaseCluster-1 (I also shared out the essbaseserver1 directory so the second essbase server can access it). I also went and installed and configured Essbase on the second server (during the configuration, I configured to be a member of EssbaseCluster-1. I am not sure if I am supposed to put the share location in the full arborpath location (I did not)). When configuring the opmn.xml file the documentation states the following (from http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install.pdf pg 172):
Setting Up Active-Passive Essbase Clusters
If you set up an active-passive Essbase cluster using EPM System Configurator, you must perform
additional steps to set up Essbase failover on both nodes of the cluster.
ä To complete the setup of the Essbase active-passive cluster:
1 Update MIDDLEWARE_HOME/user_projects/epmsystem1/config/OPMN/opmn/
opmn.xml to specify the OPMN service failover network topology. In the <notificationserver
interface> section, add the <topology> section. For example:
<notification-server interface="any">
<ipaddr remote="*hostName*" />
<port local="*portNumber*" remote="*portNumber*" />
<ssl enabled="true" wallet-file="\Oracle\Middleware\user_projects
\epmsystem1\config\OPMN\opmn\wallet"/>
<topology>
<nodes list="*nodeName1:nodePort1,nodeName2:nodePort2*"/>
</topology>
</notification-server>
2 In the same section of the file, update hostName to match the nodeName for this machine.
Oracle recommends using a fully qualified name. "
So, with these instructions, I put the following into my own opmn.xml file on both of the essbase servers. (epmapp1 and epmdata1 are my two essbase servers, they are running on the default port 1423)
<notification-server interface="any">
<ipaddr remote="epmapp1"/>
<port local="*1423*" remote="*1423*"/>
<ssl enabled="false" wallet-file="E:\Oracle\Middleware\user_projects\epmsystem1\config\OPMN\opmn\wallet"/>
     <topology>
     <nodes list="*epmapp1:1423,epmdata1:1423*"/>
     </topology>
</notification-server>
When I go to start the essbase cluster through the opmnctl startproc command, I recieve the following. Anyone know what I am missing?
C:\Users\Administrator>echo %ORACLE_INSTANCE%
E:\Oracle\Middleware\user_projects\epmsystem1
C:\Users\Administrator>opmnctl startproc ias-component=EssbaseCluster-1
opmnctl startproc: starting opmn managed processes...
===============================================================================
opmn id=epmapp1:1423
no processes or applications matched this request
C:\Users\Administrator>
Edited by: 789316 on Nov 4, 2010 12:00 PM

Have you been able to resolve this issue?.. I am also facing the same problem..
Thanks
Bala

Is sessionnumber generated in the Hyperion Essbase Server is unque?

Similar Messages

Maybe you are looking for