Is sgen available on Solaris 7?
Does anyone knows if the sgen (scsi generic driver) available on Solaris 7. It's available on the Solaris 8 but I couldn't find it on the 7.
See the doc for linux..
[Install and configure ASM in 10g|http://www.oracleracexpert.com/2009/08/install-and-configure-asmlib-in-10g.html]
Similar Messages
-
Is "SCSI Generic" driver available for Solaris 10?
I just wanted to know whether "SCSI Generic" driver is available for Solaris 10? And if yes then is it freely available?
weblinks for download would be very much helpful.
Thanks..sgen is the driver that exports the uscsi api. I would presume that uscsi and sg would be similar, but annoyingly different. You can see the uscsi interface here: http://docs.sun.com/app/docs/doc/817-5430/6mksu57l0?l=en&a=view&q=uscsi
-r -
Is ASMlib available on Solaris? How to use it?
We are going to create RAC with ASM on Solaris 10 by using 10.2.0.1 and upgrading it to 10.2.0.4. I heard there is an option of using ASMlib to prepare for ASM disk group. I saw all the cases are for lunix. Is that available to Solaris? If so, is it a must to use to prepare for install ASM and how to use it?
Thanks for advice,See the doc for linux..
[Install and configure ASM in 10g|http://www.oracleracexpert.com/2009/08/install-and-configure-asmlib-in-10g.html] -
Workshop (WebLogic 10.2 MP1) not available for Solaris 10 SPARC 64 bit?
Hi All,
When Workshop for WebLogic 10.2 MP1 will be available for Solaris 10 SPARC 64 bit.
I could find "WebLogic 10.2 MP1 for Solaris 10 SPARC 32 bit" but not for SPARC 64 bit!!
otherwise guide me to download page.
Thanks and Regards
Arunachalam.C
Edited by: arungoin on Feb 16, 2011 4:55 PMI found by issue "mount -v" that our disk slices are
UFS type. So we don't need apply patch 5257399,
right? Please confirm. Thanks!!!For your information, you are asking the user community to confirm, not Oracle. Some (many?) of us are not employed by Oracle.
Therefore, the only answers you can get are from 'friends'. Nothing would be official and Oracle (and Oracle Support) would not be legally responsible.
Your safest bet would be to escalate the request wityh Oracle Support. -
How to check no. of NIC cards which are available in Solaris 9 server.
How to check no. of NIC cards which are available in Solaris 9 server.
Regards,
Dinesh.Hi
For list network cards that was sometime registered in system:
grep network /etc/path_to_inst | awk ' { print substr($3,2,length($3) -2 ) $2 } '
ifconfig -a show all network interfaces that curently configured
For check that interface that was listen at first comand available or not: Try
ifconfg <interface_name> plumb
ifconfg <interface_name> unplumb
Do not touch already configured interface or lost network connection.
Regards. -
The latest Instant Client release is currently not available for Solaris Sparc 32-bit.
Does anyone know when it will be available?
Thank you.It is available now.
-
Oracle SOA Suite is also available for Solaris, HP-UX, IBM
Oracle SOA Suite is also available for Solaris, HP-UX, IBM
http://www.oracle.com/technology/software/products/ias/htdocs/101310.htmlHi-
You can use below manual installation proceeds as follows :
Step 1. Download a setup for Windows and run it on a Windows machine.
Step 2. Once the setup is finished, FTP all the following files and folders from your Windows machine to you Sun Solaris server :
the entire 'bin' folder (excepting the '.bat' files) - ASCII transfer mode
the entire 'lib' folder - BINARY transfer mode
the entire 'drivers' folder - BINARY transfer mode
Step 3. Once you have transferred all the files, do not forget to configure the odiparams.sh file according to your environment. Also add the appropriate files, used by ODI to connect to your technologies, to the 'drivers' folder.
Does it helpful?
Thanks,
Saravanan Rajavel -
Is ODI available for Solaris platform?
Hi,
I would like to know is there ODI available for Sun Solaris platform. I found in the installation document it says it is compatible with Sun Solaris. But I dont find any downloadbles available sun Solaris Platform.
In the Installation Document i found like
Minimum System Requirements:
This configuration is typically for 2 Oracle Data Profiling/Quality users and an overnight data
quality processing load.
�� 2 GB RAM
�� Disk space depends on the data processes, we recommend 1,5 GB plus 2 to 5 times the size
of the data sources.
�� Operating Systems:
UNIX:
�� AIX 5L (v5.1, 5.2, and 5.3)
�� Solaris 8, 9 or 10
�� HP-UX 11.i V1 (PA RISC), HP-UX 11.i V2 (IA64)
�� Linux Red Hat Enterprise Linux 2.1 and above
Windows:
�� Windows: Windows 2000 Server with SP 3
�� Windows Server 2003 Standard Edition with SP 1 (32 bit)ux Suse Version 9.2 Professional and above
so can I install ODI for unix in SolarisHi-
You can use below manual installation proceeds as follows :
Step 1. Download a setup for Windows and run it on a Windows machine.
Step 2. Once the setup is finished, FTP all the following files and folders from your Windows machine to you Sun Solaris server :
the entire 'bin' folder (excepting the '.bat' files) - ASCII transfer mode
the entire 'lib' folder - BINARY transfer mode
the entire 'drivers' folder - BINARY transfer mode
Step 3. Once you have transferred all the files, do not forget to configure the odiparams.sh file according to your environment. Also add the appropriate files, used by ODI to connect to your technologies, to the 'drivers' folder.
Does it helpful?
Thanks,
Saravanan Rajavel -
Hi
Does any of you know when 11.1.0.7 for "Solaris Operating System (SPARC) (32-bit)" will be available for download on http://www.oracle.com/technology/software/tech/oci/instantclient/index.html ?
The reason for my question is that 11.1.0.6 contains a bug (at least on Solaris) causing it to reserve approx 180M swap for each client started!
Regards
MadsJust became available on http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/solsoft.html
-
[OTN |http://www.oracle.com/technetwork/oem/enterprise-manager/downloads/index.html?origref=http://www.oracle.com/technetwork/oem/grid-control/index.html] Hi All,
EM Binaries updated with bundle patch1 are now available on OTN
OMS and Management Agents for platform ::: Solaris (SPARC), Solaris (x86-64), and IBM AIX (64-bit)
Management Agents for platform::: HP-UX, or HP-UX Itanium
The BP1 workbook is updated with various use-cases specific to these platform. We strongly recommend you to follow the instruction from the workbook to apply BP1 patches. If you have any doubts feel free to drop me an email.
http://docs.oracle.com/cd/E24628_01/doc.121/e35229/toc.htm
Regards
AkankshaOracle Instant Client was a "feature" introduced with Oracle 10g. There is no 9i version.
Code that links with Oracle 9i libraries should be able to be linked with Instant Client 10gR2.
The resulting application will be able to connect to databases from Oracle 8.1 onwards. -
Availability of Solaris 9 Docs for download
Hello Friends,
I am an SCSA 8. And I have been working as SA Now I am planning to work with Solaris 9.
Whwn I am trying to down load the Solaris 9 pdf Docs it is asking for username and password.
Where can I get them? I mean where shall I register for that?
I will be grateful to you for ur info.
Thank you very much in anticipation
SreeramaSolaris 9 has been released, so the pdfs on docs.sun.com are available.
-Greg -
Availability for Solaris Intel or MacOS X Intel?
if there is , how stable it is to run this software over a compatibility layer on top of these OSs ?
This is what you have available in OTN.
Oracle8i Enterprise Edition Downloads
Note: Oracle9i, Oracle's newest database, can be downloaded here.
Linux
Oracle8i Enterprise Edition Release 3 (8.1.7.0.1) for Linux (Intel), with OPS
Windows
Oracle8i Enterprise/Standard Edition Release 3 (8.1.7) for Windows 2000/NT
Solaris
Oracle8i Enterprise Edition Release 3 (8.1.7) for Sun SPARC Solaris (64 and 32 bit)
UNIX
Oracle8i Enterprise Edition Release 3 (8.1.7) for AIX-Based systems (64 and 32 bit)
Oracle8i Enterprise Edition (64-bit) Release 3 (8.1.7) for HP 9000 Series HP-UX
Oracle8i Enterprise Edition Release 3 (8.1.7) for Compaq Tru64 UNIX
http://otn.oracle.com/software/products/oracle8i/index.html
Joel Pérez -
Nested virtualization not available in Solaris 11.2
Hello!
Anybody know why virtual hardware virtualization is not available for my Solaris 11.2 guest?
I want to be able to use Solaris kernel zones.
Host environment:
SuperMicro A1SRM-2758F, 32GB RAM
ESXi-5.5 (build 2302651)
I know the CPU (Atom C2758) supports both VT-x and EPT that is required for 64bit virtualization nesting
And browsing to:
https://myip/mob/?moid=ha-host&doPath=capability
Shows me that the (unsupported) feature is available:
nestedHVSupported
boolean
true
I have created a VM with vHardware vmx-10, selected 'Expose hardware assisted virtualization to the guest OS' and installed Solaris-11.2 as a guest.
I have also checked that 'vhv.enable = "TRUE" ' is to be found in the vmx file.
But from the Solaris guest Kernel zone are not available:
# virtinfo
NAME CLASS
vmware current
non-global-zone supported
# uname -a
SunOS global1 5.11 11.2 i86pc i386 i86pc
Anybody have any ideas why this is not available. Worked fine in VMware Fusion.
Best regards,
- Morten Green Hermansen, FanitasHello jmattson!
I tried to add:
vvt.etmt.uc = "TRUE"
to the vmx file and according to the log it got picked up:
2015-03-31T20:03:40.790Z| vmx| I120: DICT
featMask.vm.hv.capable = Min:1
2015-03-31T20:03:40.790Z| vmx| I120: DICT
vhv.enable = TRUE
2015-03-31T20:03:40.790Z| vmx| I120: DICT
vvt.etmt.uc = TRUE
2015-03-31T20:03:40.790Z| vmx| I120: DICT sched.scsi0:4.throughputCap = off
2015-03-31T20:03:40.790Z| vmx| I120: DICT sched.scsi1:3.throughputCap = off
But Solaris will still not support kernel zones:
# virtinfo
NAME CLASS
vmware current
non-global-zone supported
Will I then need to upgrade to ESXi-6 - and downgrade to the Web Client :'( for this to work?
Best regards and thank you SO much for your help!
- Morten Green Hermansen, Fanitas -
When will 11gR2 be available for Solaris?
It's been three weeks since the release so I'm curious if anyone knows of a date for when 11gR2 for Solaris will be released?
Thanks!Hans Forbrich wrote:
Solaris 8 is supported officially until March 2012
Solaris 9 is supported officially until October 2014
Oracle's policy has been to ensure all supported versions of an OS are treated the same at the time of an Oracle s/w release - if they are available, all features for an Oracle release will have been tested and, as far as feasible, will work the same with the exception of performance.
I admire Oracle's consistency.
I am saddened by people who seem to not accept that Oracle customers may be at a wide variety of supported versions of an OS and should be supported by Oracle product.You certainly have a respectable viewpoint.
I personally was (and am) most saddened at no 11g release at all on the Solaris x86_64 platform. I sometimes wonder if that was political reasons rather than technical or straightforward business decisions.
I generally think that for most Solaris customers moving to 11gR2 the business case would be overwhelming to move to Solaris 10 at the same time (exception might be a client only install). 11gR1 and lower are available to customers wishing to remain below Solaris 10.
What moving to solaris 10 would give is the ability to ensure concentration was made to intergrate well with the Solaris SMF facility rather than a dual SMF/legacy approach; and I'm not sure Oracle can really put in the resources to support both well.
I really dont think are in the upgrade catch-22 that used to occur (but I may be wrong here) .... for instance when Sun ultrasparcs needed Solaris 2.5/2.51 and that Oracle 7.1.4 was not supported on that release (7.1.4 was only supported to Solaris 2.4) . However 7.1.6.2 (which ws the terminal 7.1 release) would not run Oracle Forms 2.3 correctly for existing applications (it finally would (and would do so excellently) with a few patches but 7.1.6.2 had burnt a development DBA badly by that point, nd 7.3 was not an option as that was not compatible with forms 2.3). The upgrade plans for the E-Business Suite on a Sparc 1000 containing dev/test/prod on same Solaris 2.3 server were even more of a nightmare in that era.
Edited by: bigdelboy on 24-Sep-2009 00:40:
Having said that the main pain would probably be that some Solaris 8 / Solaris 9 servers out there may be tight for space on partitions containing root, /usr and /var and an upgrade to solaris 10 might require some shunting and shuffling. If overall server space is an issue then IMHO going to 11gR2 needs to be thought carefully anyway.
Hans - you've made me feel guilty :_| ... I :x all of Solaris 2.4/2.51/2.6/8/9/10u3+ -
DataSocket library available for Solaris 8
We are in the process of evaluating LabView and/or Labview/CVI for our application. One of the questions I have is whether a DataSocket library is available for use on a Solaris 8 platform so we can receive LabView data (via a DataSocket) there? If it is available, is there some sort of evaluation copy I can get ahold of to validate our concept??
Thanks
Jim Galbraith
Idaho National Engineering and Environmental Library
[email protected]Jim,
The DataSocket(DS) library is available for use on a solaris 2.8 platform with the only limitation that the DS server is not available. You can request online evaluation versions for NI-Software at the following link:
http://sine.ni.com/apps/we/nioc.vp?pc=res&cid=1380〈=US&p_0=eval
Cyril
Cyril Bouton
Active LabVIEW Developper
Maybe you are looking for
-
Using table filters with transient VO attributes
Hi, I have a the following use case and I cannot seem to find a valid solution on my own without falling into deep depression and/or psychotic delirium. Anyway, I'm sure there's a solution and that it's pretty simple, and hopefully someone here will
-
ABAP Proxy Receiver Asynchronous EOIO
Hi, Is it possible to Guaranteeing the Sequence of Asynchronous Messages for ABAP Proxy Receiver(EOIO)? If yes, how can I configure? Thanks, Kiara.
-
Hi I want to develop a Java program to solve Sudoku puzzles My program must be able to: �Read in a puzzle (from the predefined file format � see below) �Display the unsolved puzzle �Solve the puzzle �Display the solved puzzle File Format The file con
-
I have a rotating carousel that I would like to have rotate image by image by pressing buttons rather than by mouse position. Anyone know how to do that?
-
Hello All, I have a lotus note client installed on my my machine. I want to build a java code, which will automatically sends an email in the background. For eg. a JFrame application with a submit button. When I click a button, a mail should be sent