Is Sharpening Amount Different in LR from PhotoShop?

Is the Amount scale different in LightRoom than it is in PhotoShop.
The scaling is either different or viewing is different between the
two programs, because an amount of 100 in LR is much greater than in
PS.
CS3

Yes.

Similar Messages

Is there a way to export different button states from Photoshop to Edge Reflow? (eg., normal, hover, hit)

Is there a special naming convention I can use for layers to have the Photoshop to Edge export tool automatically recognize a button with various states? Rather than have static images, is it possible to have normal, hit, and hover states?
Thanks.

No, there's not a way to do this from Photoshop.
VIc

Colours different on illustrator from photoshop for example white is grey

hi
I was wondering if anyone could help me with a illustrator colour problem. I place images from ps into illustrator and they print out darker and more faded for example a image with white in it comes out grey?! does anyone know how to prevent this?
regards,
Helen

Helen,
FAQ #21: http://www.adobeforums.com/webx/.eed5198.2cd0f59f

Different Colors when printing from Photoshop and InDesign CS3

Different Colors when printing from Photoshop and InDesign CS3
I have the following problem:
When printing from Photoshop or InDesign to a PostScript printer, Adobe recommends to let Photoshop handle the colors (I use the German version, so I don't know the exact term used, it changes slightly in all CS3 apps anyway).
The manufacturer however told me to let the PostScript printer handle the colors.
When I chose this option in Ps's print dialog and then choose ISO Coated as the printer pfofile, the results are fine.
But when I place the exact same image in an InDesign file and print from InDesign or export to PDF and print via Acrobat, again using "Printer handles colors", the results are the exact same as if I had used Ps and chosen to let Ps handle the colors (way too saturated and a bit too red).
·Photoshop CS3
·InDesign CS3
·Test image is a TIFF in CMYK Fogra 27 Coated (which is also the working color space in Ps and ID.
·Printer: Xerox Docucolor 3535
·Printer profile: ISO Coated
How can I make sure the printer handles the colors in other CS3 apps than Ps? I tried it with ID's print dialog (translated from the German version: Color Management > Options > Color Handling: PostScript-printer decides colors).
Thanks a lot!

RE: "You don't indicate what Xerox printers you have"
In my first post I named it, is that the information you need?
Docucolor 3535 using Splash 3535
That's interesting, so I have to find a way to turn off the printer's Color Management function? I mailed them, hope they can tell me how to do it easily. They usually just tell me to not use any profiles and so on, but that's the general rule in this area, I'm really tired of hearing it. Everybody seems to think profiles and LAB mode are nuclear science and I should stay away from it.
Anyway, the test image I'm using is a simple photograph (size A3, 300dpi), so no transparencies at all. I'm placing this image into an equally large ID file and print it from ID, then export it to PDF-X/3 and print it from Acrobat. Hope that helps.

File displaying different from Photoshop to Illustrator

I have a simple chalkboard background I made in Photoshop and I'm importing into Illustrator. My issue is the file displays completely different from Photoshop to Illustrator. See image below.
I've had this happen to other files but this one is so incredibly different, I can't understand what's happening and I can't manage the design with it being this different. Any ideas?
Thanks in advance for your help!
Rachel

Thanks again Monika. I can't figure this out. The color management is all synchronized among all my Adobe applications. Yes the file is in layers and when I view the JPG in Photoshop, it looks as it should. It's only when I bring it into Illustrator does it look like that. I opened up a new Illustrator doc and placed the same JPG (as well as dragged the PSD file directly from the Photoshop window into Illustrator) and it looks better and more like it should. My other doc was a new doc too so I'm not sure what happened. At any rate, I can't explain what happened and I'm just hoping it doesn't happen again.
Thanks for your help!

What is Lightroom for? How is it different from Photoshop?

What is Lightroom for? How is it different from Photoshop?

Hi stephen,
for detail information, read this : https://forums.adobe.com/message/4568487
regards

What settings are best to export sharpened images from Photoshop to use in Final Cut?

I need to give a professional photographer the correct dimensions to export her images from Photoshop for me to use in Final Cut. I told her:
1080 x 1920, 300 dpi, and also to Convert Images to Apple RGB (Final Cut doesnt work well with Adobe RGB, I am told). Her images have alot of heavy sharpening on them--she is an artist--and when i import them into Final Cut, many of the lines that should be crisp are zig-zagged, and if I apply motion to them, they "shake."
My problem is specific to images that have been highly sharpened in Photoshop; i have imported lots of professional images before with no problem. I am on deadline and hope someone out there will see this.

You were right about trashing the finalcut plist. As well as a very specific set of directions I now have put together from what you and others have said elsewhere, and this is it, i hope it helps others with their Canon XHA1 and Final Cut Express HD:
Trash the final cut preferences (plist) in your Home - LIbrary.
go into the Canon XHA1 menu, make sure that you're not set to down-convert to DV.
Get out of the menu. Shut the camera off,
plug in the firewire cable to both the camera and computer,
and turn the camera back to VCR mode.
Open up Final Cut, and go to Easy Setup ,
choose HDV- Apple Intermediate Codec 1080i60
This worked beautifully but took me nearly four hours to figure out, including researching the web and experimenting in FCE HD

Redemption code from Photoshop Elements 12 purchased from Best Buy does not work 'Oops! This code doesn't seem to be active. Please contact the retailer you purchased the card from, or use a different code.' I have an invoice and the pickup notice from

Redemption code from Photoshop Elements 12 purchased from Best Buy does not work 'Oops! This code doesn't seem to be active. Please contact the retailer you purchased the card from, or use a different code.' I have an invoice and the pickup notice from Best Buy. What other information does Best Buy need? What will they do? Will I get a new box? What happened to the days of just typing in a simple s/n?

Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

Placed bitmaps in Illustrator from Photoshop have different colour breakdown?

When I place a bitmap in illustrator from Photoshop the colour breakdown changes. In photoshop, it could be set up using a 100% Solid black using CMY 0% and K100% but when I place this in illustrator the breakdown changes to say C:78.89%, M:80.45%, Y:88.90% K:90.45%.
Does anyone know why this happens and how to prevent it?
Thanks!!

You cannot read the exact color values of a placed bitmap in Illustrator, you have to open the imaeg in photoshop. Never use SHIFT eyedropper if you desire color accuracy.
To prove this to yourself, you can use seperations preview to verify there is no CMY in your placed image, or print seperations to a laser printer.
Below are the values I get using shift eyedropper.
But look there is no CMY.

Printing problem from Photoshop CS2 to HP 3500CP plotter

I am running Photoshop CS2 on the computer connected to my 3500CP plotter. I have for the past few years had no problem printing. This past several days tried to proint a banner for my daughter's birthday and whenI go from Print with Preview to start the print it shows the plotter is receiving the file. The plotter automatically does a printhead check and then shows it is printing but then just starts rolling a blank page out until I stop it and reset everything. I have run several tests on the plotter and all come back good so I am guessing it is coming from Photoshop though I am doing nothing different than I have before. I hope someone has a suggestion sisnce I need this banner before Friday. My daughter turns 33 on 11/11/11. Thank you in advance.

Well... I fixed the problem a little differently. I got a 100% + costs refund from HP themselves and bought an Epson! Boy, was that ever the right decision to make. I've had not a single problem with the Epson where the HP gave me a litany of endless drama. I can't understand why a printer maker needs to create faulty and bug ridden software that wants to take control over both Windows and Photoshop and then they try and blame everyone except themselves.
The HP Z5400 postscript printer proved one important thing to me... You only ever get what you pay for. I run canvas about4 to 5 hours a day with the Epson. I had to stay at work past 8 hours a day just to get the same amount of work out of the HP. For speed, I've never had anything faster than a Canon 8100 but the hidden costs of ownership are horrendous. The HP was the cheapest printer I've had and the slowest. The Epson is economical to run, performs at a reasonable speed and doesn't have any hidden costs.
After 5 months of hassling HP to get the "next day, on-site" support I paid $1200 extra for and never got, I can guarantee you I'll never , ever own another Hewlett Packard product again. I had to go to the Asian Pacific head off to get anyone who'd listen to me. The Australians wanted me to sign a form I'd keep my mouth shut and sacrifice nearly a grand I'd put into it before talking about a refund. Then I discovered they'd been fined 3 MILLION bucks by the competition and consumer watch dog in Australia over telling someone who bought a $200 printer to go take a walk when it dropped its guts a few weeks after buying it. That mob is pure poison for consumers.

Printing banner images from photoshop CS3

Hi, I have successfully printed banners 1200mm x 297mm from my Xerox Phaser 7750 and Illustrator (Vector art). When I try to print a photographic image from Photoshop it all prints fine except the last 300mm or so. The image has white bars and properly printed image evenly spaced from top to bottom of the print. I have reduced the resolution and file size but the problem is still there with wider bars the lower the resolution. The original image was 160mb but I have the same issue with a 20mb image. ALso tried placing in Illustrator but get similar problems.
I assume this is a memory issue but I thought lowering the file size drastically would fix it, yet it doesn't. The Printer has a relatively low amount of memory (384mb) but I would like to know if this is the real cause before I dive and buy more memory - big chips are still expensive on this.
Any help would be very welcome.
Thanks. Ant

Hi, I will try printing from inDesign but I have managed to get an image to print out by changing the quality in the print driver to standard - it was previously on 'Enhanced' or 'Photo'. I had tried from Illustrator and had similar problems (printed OK with Illy created art though) so thought it may be a printer memory issue which does seem to be the case. I assumed that by reducing the file size/resolution it would print but it seemed to be the image quality that uses more computing power than the pixel count of the file. I guess a different RIP may also help as it could use the much higher RAM of the Mac rather than the printers meagre 384mb.
I had originally thought it may be a P/Shop issue as I had problems printing to Epson inkjet some months ago and then Epson and Adobe seemed to blame each other!
Thanks for the reply.

Can't export an EPS file from Photoshop CS5 and open in Illustrator CS5.

I'm on Mac OS X Lion 10.7.5
I am making DVD covers for print. The barcodes for the DVD covers have to be done in Illustrator. But the original designs are done in photoshop including the text. For years this hasn't been a problem. Right before adding the barcodes I create an EPS file from photoshop, open that file in Illustrator and all my text is automatically coverted to perfect crisp clean vectors, viola! I add the barcodes and export the PDF for the printers.
But now I can't open my EPS files in Illustrator CS5 even though I'm exporting them the same way I always have from Photoshop CS5. Illustrator says... "The operation cannot complete because of an unknown error." --> Note it does not give an error number after this warning like I see it does for so many other people.
I have been trying to fix this for over 10 HOURS spanning 2 days! I'm infuriated I can't get help from Adobe on this and have read all the forums and don't see my problem listed anywhere.
I've tried:
- Deleting the .plist file and the Settings folder & resetting my permissions
- Uninstalling and Reinstalling Illustrator
- Turning off all other applications
- Creating more disk space on my hard drive (even though I have 200gb available)
- Restarting the computer
- Disabling my Font book and still I can't open the EPS file
I thought maybe it's possible it's the font I'm using Fontesque OT so I even tried converting text to objects prior to exporting the EPS file from photoshop to illustrator and turning off my font book, but still it won't open. And if I open the PSD directly in Illustrator, text comes out a bit fuzzy in the PDF I export.
If anyone can provide any solutions I would be so grateful! I'm at my wits end here, this should have taken under an hour to do and now it's ruining my entire weekend. I'm completely panicked because I was suppose to have these to my client over the weekend so they could turn them in for Print frist thing on Monday morning and of course Adobe provides no chat support or phone support after 7pm on weekday or on the weekend which is when this all started.

I never even thought of reinstalling photoshop, but I think this was a font issue. I'd never saved an EPS with Fontesque OT Regular enabled, only Fontesque OT Bold. Somehow I think the font was causing the problem because ridding the font from the equation allowed me to open the EPS file.
After 12 HOURS of trying different things I found a WORK AROUND...
I had to:
- Select the Text in Photoshop (with Fontesque OT enabled) --> Select Create Work Path --> Covert to Shape on each of the text items
- Save EPS file out of Photoshop
- Disable Fontesque OT font in Font Book
- Then open EPS in Illustrator add in my Barcodes and export the PDF
(the barcodes have to be added in Illustrator because they need to be pure 100% black with no CMYK color in them. You can't save them out of Photoshop that way, only Illustrator, otherwise I would have made my pdf straight out of photoshop like any other normal human
This work around is the only way I could get the EPS files to open in Illustrator and still have the text remain super crisp like a vector.
NOTE to others in the future about crisp text from Photoshop to Illustrator:
- Simply "converting to shape" did not preserve the vector. You have to Select Create Work Path --> then Covert to Shape on each of the text items (with the font enabled) for this to work and preserve the crispness of the text. Even creating "smart object" did not truly preserve my vectors or the text crispness in the EPS file once I imported it into Illustrator.
DrStrik9 thank you SO MUCH for trying to help me. You did give me ideas that helped me figure out the workaround and also helped me feel not so alone as I struggled through this. I'm going to follow up with your other suggestions about reinstalling photoshop and also checking my RAM, etc. But I just want to that you so so so SOOOO much for all your time and consideration in this matter. I hope you have a wonderful amazing week ahead and that someone does something very nice and thoughtful for you too

Can't print from Photoshop or Lightroom

OS: Mac, Intel, OS X 10.6.7 (Snow Lepoard)
Photoshop CS5, v12.0.4, x64
Lightroom 2: v2.7
Printers: Epson colour inkjets, HP LaserWriter, Brother colour inkjet
Hello All.
I am at a lost with this issue which has only started in the last month or so on two different computers.
I am unable to print any doucments from Photoshop or Lightroom to any o my printers. All other applications print just fine to all printers. No error messages, the print job just nevers gets to the print drivers. I can print the documents by saving to the desktop and dragging the desktop file to the printer 'print queue' window.
I have spent the last week searching online for a solution, but can't seem to find one.
Any assistance grately appreciated.
W.

Hi - thanks for responding! Is this any help to you?
Faulting application name: Photoshop.exe, version: 15.2.2.310, time stamp: 0x5480338c
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
Exception code: 0xc0000374
Fault offset: 0x00000000000c4102
Faulting process id: 0x16d8
Faulting application start time: 0x01d01acda5db80f6
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: 3a523491-86cc-11e4-a766-6cf0490a797e

Can't Print to Epson Printers from Photoshop

Hey everyone - for some reason I am unable to print from Photoshop CS6 to two different Epson printers - an Epson 9800 and an Epson 7880. I have tried to print from three different computers (OS 10.6 and OS 10.8) and have also tried three different USB cables. Each time I get the same results - the computer acts like it sends the data to the printer, but the printer never prints anything. I am not getting any error messages. I am attepting to print a 3960x2160, 720 DPI RGB TIF image. I tried printing from Preview as a test but that didn't work either.
This is a new problem as I have been printing to these printers for years with no issues.
I have tried reinstalling drivers, turning the computer and printers on and off, cleared my caches and repaired permissions, but so far no luck.
However there is ONE situation in which I am able to print - if I save the image as PDF and print it from from Acrobat, specifically with "Acrobat Color Management" selected, it WILL print. If I try to print from Acrobat with "Printer Manages Colors" selected, it will not print.
This is really driving me mad and I would love to find a solution. Major thanks to anyone who can help!

Success! I have no idea what the issue here is but I tried printing a completely different file as a test, and lo, that file prints fine. The other file does not. Since the file I'm trying to print is a rasterized Illustrator file, I just rasterized it again so I'm working with a new file, and it prints! I am so pleased.

Photoshop CC 2014 freezes after 20 minutes of use. I can only minimize it. It even crashes sometimes. Trying to get help from Photoshop GPU FAQ but in vain.

I have formatted my laptop, Reinstalled all my Adobe softwares and still the same problem continues.
Photoshop sometimes gets stuck in between while working no matter what the file size and dimensions. Its not about lagging. The screen is just stationary and I can't access any of Photoshop's commands for the stationary period of some seconds or a minute. I can only minimize it. Photoshop even crashes at times.
I have latest wacom drivers installed 5.3.5-5, Bamboo dock installed, and NVIDIA, GT 740M version 347.52. I have verified the problem with Wacom but they say the tablet doesn't have a problem. I have even tried using Intuos 5. When I use the zoom command with mouse the document zooms in and out continuously without any control.
I tried to get help from Photoshop CS6 GPU FAQ
but in vain.
Bamboo Create Medium CTH 670/K0 C
Windows 8.1 with NVIDIA graphic card and Intel R HD graphic card

If you have both a Nvidia GPU and Intel GPU on your machine have you disabled the Intel GPU in windows Device manager. Adobe in the GPU FAQ clearly state that you may have Photoshop problems if your running machine configuration has multiple GPU that are different GPU.

Is Sharpening Amount Different in LR from PhotoShop?

Similar Messages

Maybe you are looking for