Is sign/pre-signing for your device necessary?

Hi, I'm an American living overseas and I recently bought an ipod online. The ipod will be shipped to a forwarding address in the U.S. The problem is that I can't sign or pre-sign for the delivery. Is there anything else I can do? Thanks.

That would be between you and the parcel carrier. If you ordered from the online Apple Store, it is possible for normal shipments to pre-sign for an order:
http://store.apple.com/us/help/shipping_delivery
but Apple does not ship to freight forwarders and most forwarders will not accept such forms, so that's probably not an option for you. As JEM24 suggested, it would be best if you can have the iPod shipped to a friend or relative in the US who can then resend it to you.
Regards.

Similar Messages

10.3 OS Upgrade error. An error has occurred while downloading software for your device. Please verify your internet connection or try again later

HELP ! HELP ! HELP ! "An error has occurred while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." appears while attempting to upgrade or install BlackBerry Device Software. upgrading my Z10 OS to 10.3 on both (link & web). but facing same problem again and again. plz help. internet speed is 1mbps and working fine.

I suggest you try the very clean and very forceful AutoLoader method:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

There must be a real solution to "Windows found driver software for your device but encountered an error installing"

"Windows found driver software for your device but encountered an error installing"
I've spent hours researching this error - Seems like many people have the same issue although there is no difinitive fix or known cause.
I'm hoping someone here has an answer.
Windows 7 Home Premium x64 OEM (HP)
This is not an upgraded Vista system.
It's not a specific driver related issue as it's the same response/effect be it graphics/chip set/usb/printer drivers.
Please dont suggest to flatten and re-install or run a repair install - It's not an option, I only have remote access to the unit
as it's currently in field use.
This is a machine specific issue - identical machine purchased at the same time and configured the same has no issue.
So the story.
User has been fine for weeks - no hardware of software changes except Windows Updates.
A Camera/USB connection that was working no longer does.
Tried in all USB ports
Plug in - windows announces found new hardware, tries to install drivers then fails
with "Windows found software for your device but encountered an error installing ...."
Device manager finds and identifies device although it is in the 'Unknown Device" category.
Manually updating drivers via search/internet or point directly at a driver has exactly the same effect.
Thinking this was just the camera drivers - I researched and downloaded new drivers from camera manufacturers sites
Fuji and Canon.
Same effect.
Deleted/uninstalled drivers completely, deleted/uninstalled all USB root hub and USB devices (hidden and visible)
SFC /Scannow finds no error
Cold boot finds USB and chipset(?) devices on boot attempts to reinstall then we get
"Windows found driver software for your device but encountered an error installing"
So now I have no usb devices at all - memory stick/card reader/printer...... nada.
in fact if I try to update any device driver I get the same message generated.
Restore point does not help either.
After much trawling I found reference to a permisions issue and stale driver cache data.
(This is using an administrator account - not user with admin permissions?)
I'm willing to try anything at this time
I deleted the infcache.1 and other .dat files under c:\windows\system32\driverstore
Copied the usb .inf and .pnf from the appropriate FileRepository directory into c:\windows\inf
Uninstalled all the usb/unkown devices from device manager again.
Rebooted
Takes a little longer to boot as I take it it's rebuilding the driver cache then
a very short hurrah!!!
I can now use usb memory card and pen drives - no issue
Plug in a camera or printer...
"Windows found driver software for your device but encountered an error installing"
Several attempt at this trying different driver versions.
It should not be vendor specific, the other field machine that works is using Microsoft drivers for these devices.
I even copied the drivers from one machine to the other - repeated everything above...
"Windows found driver software for your device but encountered an error installing"
And then the nail in my sanity
Try windows update....
Reboot
"Windows found driver software for your device but encountered an error installing"
but this time its different.
The device it thinks it cannot install is the generic MTP-PTP drivers (Photo Transfer Protocol -so am I getting somewhere)
so it still finds but cannot install.
The cameras are always found but appear as 'unknown devices' and cannot be accessed
Uninstall all USB/unkown again - reboot..
Same message and this time I've lost all the USB again.
Restore point to before Win Update gets me USB back again although I still have no cameras - so theres an update issue as well.
This has to be tied down to a file access/ registry problem although I'm loath to go cutting about without some guidance.
I'm no great believer in 'registry cleaners' unless anyone can point to a definitive/no ad's/sales version that really works.
As I said above, flattening/rebuild at this time is not an option - the user is not best pleased and I'm completley stumped.
If anyone has experienced(manu of you have) and fixed(still to find one) this issue please let me know how as soon as possible.
Chris

I know I am replying to an old thread - but I have the answer and resolved this error, and since this message comes up first in search results, and part of my answer came from this thread, I wanted to help someone else as this took an extra
12 hours and a lot of technical insight to resolve. See below for detailed explanation that others ask for above.
My original issue was that iTunes didnt reinstall. generating this error that said I am trying to access an unavailable network resource and to browse to find itunes64setup (again). This may partly have been due to me deleting old install version folders.
Research led me to completely uninstall apple products and reinstall per their instruction and fixed the issue with iTunes. see
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
The SAME error I had while updating itunes recurred while uninstalling it from my Windows 7 SP1 system...so I went to microsoft Fixit and attempted to correct and it properly uninstalled iTunes for me, which allowed the reinstall.
What didnt work was my USB web root/ root hub, which partly involved my older system and USB 1.0, and the delete/reinstall existing drivers with the c:\windows\winsxs folder as source of drivers (thank you Magon Liu!!!) which I had to figure out what/why
and how.
Then I had an intel chipset issue...my new Iphone wasn't recognizing in plug and play, and there was an error with installing the device drivers for my new iphone 6. Manual applications didn't work, even though a generic device showed in control panel -
device manager with a yellow !
Per above blog answer - I tried to remove and reinstall my USB controller or update the drivers (I have an Alienware M15 laptop - a few years old.) I discovered that the USB host controller - an Intel(R) 5 Series / 3400 Series Chipset family USB Enhanced
Host controller - (port) was not covered by current Intel chipset programs which are Series 6 and later, but did have an update (8/20/2009 v9.1.1.1020) that supported USB 2.0 (and therefore 3.0 backwards compatibility which as an issue with my new iPhone
and some USB thumb drives.) To find this I had to look at the Support - Downloads and Drivers - browse for drivers and somewhere found an option to look for older no longer supported drivers. I found infinst_autol.exe for my case.
Once downloaded I tried to install and failed. Found the log in C:\Intel\Logs and contains:
[InstallDev]
          [Device]
            Driver = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            INF = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            Installed INF =
            Previous driver package =
!           Warning 0xE0000235: DriverPackageGetPath failed.
            Difx = 64 bit
Execute command: C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\x64\Difx64.exe -DriverInf "C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf" -Flags 20 -KeyPath "Software\Intel\Difx64"
            Using RegDeleteKeyEx
!!!         ERROR 0xE0000246: DriverPackageInstall generated an unexpected error
HERE'S THE ADDED EXPLANATION TO BRIAN'S POST THAT EXPLAINS THE SECURITY ISSUE:
This turned out to be an error for two reasons. First, after manually running the command in an "run as administrator" window (same error result), thinking it related to my anti-virus (turned that off/disabled firewall and A/V), and from this thread
granting my user administrative rights to files in an install folder and trying to reinstall inf files and drivers from C:\Windows\winsxs vs my copied infinst_autol.exe expansion (as found from log in C:\Users\David Samuels\AppData\Local\Temp\IPMx7\WIN7 folder).....that
there was an easier solution as the reason this error actually happens is a permissions problem.
To access the proper windows system folders - you have to be the TrustedInstaller service - not just in the administrator group...or you have to be the actual "Administrator" account. To become actual administrator on
your own laptop, Open a command window "run CMD.exe as administrator", then execute command
> net user administrator /active:yes
This creates a local PC Administrator account with no password. Coincidentally it has proper permissions to windows directories for installing drivers. Log in as this user, go to device manager and update the USB hub and any other drivers. if updating the
USB root - it doesn't replace it right away as the system cant disable the currently resident in memory "running" driver - you have to update, then restart the system, log in as administrator and repeat at the next lower layer that has issues.
Once completed - log in as yourself again and disable the administrator account in a command window with > net user administrator /active:no
This in my case enabled all my USB 2.0 and 3.0 devices on my originally only USB 1.0 laptop and everything else works properly again - I hope this helps many of you to resolve your own issues that were difficult to find and resolve and that got as far as
this thread. Good luck!
Regards,
Dave Samuels

When I try to watch certain videos on my ipad2 it says Thanks for trying to access Flash Player. Unfortunately it is not available for your device because of restrictions that Apple has put in place. Can any tell me what app I can download to replace it.

When I try to watch certain videos on my ipad2 it says Thanks for trying to access Flash Player. Unfortunately it is not available for your device because of restrictions that Apple has put in place. Can any tell me what app I can download to replace adobe flash player.
Thanks

Use the iSwifter browser from the app store. Works for most flash content.

No additional applications designed for your device were found

Hello,
I tried to install my BB Application.
My env is -
Device BB 9700
Desktop Manager 5.0.1
The first time of load my .ALX file the desktop manager show the below error :
No additional applications designed for your device were found
I retry to load the same file then this work correctly.
You have an idea ?
Tks
\\ Luigi
Solved!
Go to Solution.

You said, "The first time I try to load my .ALX file..."
This makes me think you are developing the application. Try the development forums - I'll bet someone there has seen this.

"No additional applications designed for your device were found." w/ 9500/Storm bug

Hi Guys,
I've been having trouble transfering any files to my handset with a constant return of the error "No additional applications designed for your device were found."
Does anybody know of a patch/work arround for this?
BlackBerry 9500/Storm OS 4.7.0.65
BlackBerry Desktop Manager 4.7.0.25

Perform clean uninstall of existing Blackberry Desktop Manager.
Check this link for instructions: http://www.blackberry.com/btsc/KB02206
After that download and install the most recent version of Blackberry Desktop Manager.
You can get it here: http://na.blackberry.com/eng/services/desktop/

This is the messsage i get when trying to install nano 7th Generation........windows found driver software for your device but encountered as error whille attempting to install it .......what do i do plzs help.

This is the messsage i get when trying to install nano 7th Generation........windows found driver software for your device but encountered as error whille attempting to install it .......what do i do help plzs.

How to restart the Apple Mobile Device Service (AMDS) on Windows

I have using I phone 5c after connected with my HP elite book 6930p laptop, Automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.

I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed Window 7 32 bit). automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
I did install itunes and update also. but the above problem still same.
Kindly give me solution of it. awaiting.
Regards
Abbas Kader

try it with another computer to check if it shows up
if so
uninstall all apple software
reboot
use regedit to search and remove all itunes keys
reboot
resinstall apple software
if non of that helps then try another cable
if that don't help could be your phones connector is damaged

Message: No additional applications designed for your device were found

I'm trying to add a program onto my blackberry Pearl using Desktop manager & I get the message: No additional applications designed for your device were found. Help! Thanks in advance!
- Lola

Hi
I have the same problem with a 8310 on Vodaphone. I had a quick look on the link given but it didn't list my phone and doesn't appear to cover Vodaphone.
Do you know where I can find the software I need ?
Thanks
Thanks
Rog

Calendar sync problem: "the default service for your device's calendar has changed..."

When I go to sync, this window pops up: "The default service for your device's 'Calendar' has changed since the last time you synchronized. Click OK to use your new default service and combine your data, which might duplicate some entries. Click Cancel to stop...."
I haven't changed a thing. What's going on? I don't want to get duplicate entries.

Yes, I sync with Outlook. From what I understand, your default service should be your e-mail address for both mail & calendar.Spell Check

TS1702 adjusting the security and permissions settings for your device.

I Updated to the ios6, then tried to save a video to the camera roll. The app asked if I would allow it to have access to my photos, and I said "no" and now I can't save any videos made with that app to my camera roll. I contacted the support at vidrythum and they said I had to contact apple and ask how to adjust the security and permissions settings for your device. Any ideas??
thanks

WOOHOO!!
You are a diamond!!
All working now. Thanks mate.

Bbm music unavailable for your device.

bbm music unavailable for your device. Really? why? i used this in beta zone for two months discussed and helped with the bugs and now i cant download the oficial release? why why why!?

You should be ok, available for OS5+ devices.
Have you cleared the AppWorld Cache (type alt + rst in MyWorld)?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When I update apple driver, a pop-up error message "The folder you specified doesn't contain a compatible driver for your device. If the foldre contains a driver, make sure it is designed to work with Windows for x64-based systems."

When I update apple driver, a pop-up error message "The folder you specified doesn't contain a compatible driver for your device. If the foldre contains a driver, make sure it is designed to work with Windows for x64-based systems."

Hi,
Please also check Event Viewer if it identify this problem.
In addition, also check Device Manager, if similar driver already installed, try to uninstall them and reinstall new driver again for test.
Roger Lu
TechNet Community Support

No product available for your device.

When I try to download Norton Internet Security Suite I get this message "No product available for your device."
I recently got a new computer and wanted to install the security suite on it and got this message. Can anyone tell me why I got this message.

The compatibiity update for the Comcast version of Norton has not been released yet, but wil be released prior to the guesstimated release date of Win 10 (Juy 29th). Norton never has supported any OS prior to it's offfical roll out.
Addtional info in regards to the Beta testing of the retail version of Norton for Win 10 can be found in the following link:
https://community.norton.com/en/forums/NS_NSBU_Beta_Win10

This is the best fix for your device!

Giving us more details when posting a question please.
Device info
Your carrier:
Model info and OS version (Go to Settings, then Options, then about):
Add above to you profile if you dont want to type it in all the time.
Apps and free space
File free before and after a battery remove/replace. (Go to Settings, then Options, then status):
Did a battery pull fix your issue?
Apps installed and their version if possible. (Go to Settings, then Options, then applications):
BT device model/version (you will have to look at the BT device):
When writing your question
Any other details that would help us out with your issue:
Good description of what is really wrong and how to reproduce if possible. Details of what you did before:
What is worth a thousand words
Pictures of your issue if possible:
Screen capture if possible with this:
Free BlackBerry Screen Capture Program Zonasnap OTA from your device http://zonablackberry.com.ve/forum/download/desarrollo/javiergv/ZonaSnap_English_Version/ZonaSnap_OT...
With out this info, we are just going to ask you for it and delay your response.
A media card full of songs and pictures will take a long time to generate the thumbnails and song playlist, possibly making it slow up first use. Older apps transfered to the device with Device switcher can cause issue if not compatable with OS 6. On device go to Options, Device, Application Management is a great way to see what your apps are doing with your CPU usage on #Torch. Just slide top bar to CPU and see what is going on. Also touch the CPU menu to see other time variables. I found out that an app was eating away CPU cycles on mine and the charger was unable to keep up. My Torch and charger were both very warm and I noticed the charge indicator was not showing it being charged at times.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

I downloaded Capture It Version 1.4 Free BlackBerry Screen Capture! at http://m.thetechmogul.com and when I ran, it gives me an error message, "Uncaught exception: net.rim.device.api.system.ControlledAccessException". My only option to to select "Ok" button
I have a BB 9100 Pearl 3G with Telus, v5.0.0.604.
I get this message before and after a battery pull.

Is sign/pre-signing for your device necessary?

Similar Messages

Maybe you are looking for