Is SilverLight compulsory for running a Labview program?

Hi,
I am using a computer on which Silverlight isn't installed (the microprocessor doesn't have SSE instructions so I am not able to install it). While installing Labview 11 I got a message saying SilverLight isn't installed. I will test my labview program tomorrow (recording analog inputs with a Labjack U6 unit (usb connexion)).
Could anyone tell me if in this particular use of Labview (recording analog inputs + savind data to a file) SilverLight is compulsory?
If needed, here is the computer :
http://robosavvy.com/store/product_info.php?currency=EUR&cPath=39&products_id=1704
Thansk a lot
User
Solved!
Go to Solution.

What OS version are you using on this? 512MB for anything better but XP Embedded sounds really very short!
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

How to run a labview program(*.vi) in VB6?

Hi:
I use measurement studio 6 and VB6.I want to run a labview program(*.vi) which is no parameters to input to judge whether spectrum ananlyzer is in ready state.How can I run the program? Can the judgement be implemented through measurement studio 6?
Thanks for your help!

You can do this with VI Server. Here are a few articles and examples that you can look at to get started:
LabVIEW and Visual Basic - Example 3: Sharing Code with Visual Basic
Calling a LabVIEW Executable from Visual Basic
Calling a LabVIEW VI from Visual Basic through ActiveX
Passing Data between LabVIEW and Visual Basic Using the ActiveX Server
Calling LabVIEW as an ActiveX Server from Visual Basic
- Elton

Error when running the LabVIEW program

hello...........
I'm newbie in LabVIEW....I have a problem when i'm running the LabVIEW program...i want to analyse data using the LabVIEW through the real experiment....
My problem is, there is an Error when i try to start the program...This Error forced me to restart the program several times until it can run.......By the way, i'm using Picoscopes 3206 to connect the LabVIEW program in PC with the real experiment.....
Here, I'm attached the picture that I snap when the Error occur....
Attachments:
error.JPG ‏222 KB

You have to try to isolate the problem...
Use 'Diagram disable' or 'Case' structure to run special part of code or try write a specific code to access and manage your equipment.
Several questions could help:
- Are you up to date with your hardware driver?
- Do you call external ressources (ex: dll)? perhaps with instability
- Do you properly close connection with your equipment after using?
- With your offline mode, do you load all the code, including hardware driver or do you use a special method without no loading the specific code?
- When you are able to run after many tries, is the program stable? Can you re-start it without exiting LabVIEW?

JSP codes for running a JAVA program

hello...
does anyone know the JSP codes for running a Java program from my web page?? i mean i already have my java program compiled... and i just want this java program to run in the background when I click on a button or a link...
Any idea about this?
plz advice..
avi

yes... u r somewhat right... but this runs on Jakarta Tomcat...
i'm using the Apache Http Server together with the ServletExec AS which enable the Apache server to run JSP..
I've created a package where i've put my classes...
WEB-INF/classes/tbd(package name)/my classes
and i've added.. package name.. in my java program..
and then in jsp... i've written..
<%@ page import="tdb.*"%>
<jsp:useBean id="exec" class="tdb.textdb" />
<%exec.convert_data();%>
but when i run the page it says the package does not exist...
can anyone tell where to place the folder WEB-INF so that it can run fine?
thx
avi

Once running the labview program which contain DAQ Assistant ,the message of "ERROR-50405....." appear.

Once running the labview program which contain DAQ Assistant and can be run without any error before, the message box of "ERROR-50405....." appear which capture down in the attachment. We use PCI6221 and LabVIEW 8.0 in Windows XP. I also found that the Device Manager of Window have recognized the PCI6221.
Any help on this situation would be great.
Attachments:
labview error.JPG ‏145 KB

Hi~
This error is due to signal interference between the device and the computer. This could be environmental or due to the PCI Controller. You can on a different computer to see whether this problem persists.

HP4275A can not pass self test after running the labview program

I am using Labview to control HP4275A LCR meter. The Labview program is just the instrument driver for the HP4275A, and it works great. Before running the program, the instrument can pass both Open and Short test perfectly. But after running the program, it can not pass self test, neither Open nor Short. I don't know why?? Is it relative to my Labview program??
Thanks

Thank you so much for your help. Yes, the instrument is in Local after running the instrument driver. In normal Open self test, just choose Capactiance as the Display A, and leave the four output terminals open then press the Self Test button. The Open self test will start and "OP" will be shown in the DIsplay A window, after 2 seconds, the open test will be finished. If something abnormal, the number of the abnormal step is displayed in Display A. Similar with the Short test.
The problem I had was: before running the instrument driver, the self tests pass; but after running the instrument driver, the Open and Short test show abnormal, Open test is abnormal at step 17, and Short test is abnormal at step 24.
And the instrument driver is only write commands into the instrument and then read back measuring values from it. Nothing else. So I am not sure if the problem is my instrument driver.
The weird thing is the problems happened several times and then if I do the Open and Short self test again after running the instrument driver, both pass. I am not sure whether the problem will come back or not.
Ia there any help??
Big thanks

TPC 2215, new touch panel does not run normal labview programs?

We recently bought a PC (PPC-2115, normal win-XP) from NI for an industrial application. Now we heard that that unit is discontinued soon, so repair service will be very limited. We want to change to another iPC. NI suggests TPC-2215 touch panel with windows-7 embedded. But then they say that we need a special Touch Panel license to make exe-files for this PC.
If this is true it makes the TPC 2215 a very bad choice for us. Both that we have to pay a new licence, but most that new introduce a new taget. The exe-file we make for the TPC-2215 cannot be run on any normal PC (during tests, as backup if the TPC needs service etc.). Since we already have a bunch of normal iPC (different brands, including NI) we have to compile every program twice, one for touch panel, and one for normal labview runtime.
So is it really true that a normal labview program "hello-world.exe" will not run on the new TPC-2215?
(sampe question would apply to TPC-2206 and TPC-2212)

I can now confirm that I can use our normal license to make normal windows executable files. So I am happy!
Only the disk is a little too small, but I heard that should be changed soon.

Best Optimization settings on my PC for running Creative Suite programs?

Hi, I just downloaded the Creative Suite on my PC. I am afraid the my PC is not currently set for best optimization for running programs such as Photoshop and After Effects. While working in After Effects I had problems with pixelated images. I'm working with a Lenovo (IBM), Intel (R) Pentium (R) CPU G2030 3.00 GHZ Processor, 4.00 gb of RAM (3.90 available currently), 64 bit OS, x64 based processor. I know it's not the ideal system, but I don't use it for anything else but the Creative Suite. Any suggestions besides pitching it and purchasing a mac?

Sorry it was while working in Photoshop that I experienced pixelated images.

Panel for running a java program

Hi,
can any body guide me how can i create a JPanel for running another java class with main method. just like an IDE.
Thanks
paruchuri

Hi,
the following works. I don't know if it is an elegant way. I don't use it to start other Java-apps only for starting external Browsers and so on....
Process p;
try {
p = Runtime.getRuntime().exec("javaw yourApp.java");
} catch (Exception e) {

To write a perl script for running a java program from cgi of web server

I have to write a perl script to call a java program(.exe).I want to run this file through the cgi of the web server.
java myprogram
can anyone help me to write a perl script??

It depends on what the java program does. For example, does it parse HTTP headers from standard input, or what?
Are you sure it wouldn't be easier to turn the class into a servlet? etc.
Take a look at IPC::Open2 and IPC::Open3 though. You may need them. (That's just a guess.)

Machine environment for running a java program

Hi,
I am thinking about writing a client-server application. The communication between the server and the client and vice versa will be in RMI. My question is regarding the client machine environment - do I need to install JDK on the client machine in order to run the client? Can the client run on any environment?
Thanks

Hi,
I am thinking about writing a client-server
application. The communication between the server and
the client and vice versa will be in RMI. My question
is regarding the client machine environment - do I
need to install JDK on the client machine in order to
run the client? Can the client run on any environment?
ThanksHow do java programs run?
Compiled Java programs are stored in files as bytecode. As a Java program is running, the Java Virtual Machine (JVM), which is a piece of software, converts the bytecode into machine executable code for the particular platform on which the program is running. This code is what is executed by the processor. Bytecode is not specific to a particular platform, but the machine code generated by the JVM is.
[url http://www.webopedia.com/TERM/J/JVM.html] definition of JVM as per webopedia[ [/url]
Hopefully now you have an answer to your question.

What is the best solution for running windows based programs

I have one program that I need windows for. What is the best solution for doing this without painfully slowing down my mac.

Depends on your needs.
BootCamp requires reboot and uses all physical resources of the system. Only OSX *or* Windows can run. Better for gaming or memory intensive tasks. BootCampAssistant must set up the boot sector to make it work. Also BCA required to remove it.
VM (virtual machine) like Parallels which "hosts" Windows while still running OSX. You split RAM between the two environments. VM is just another program so no special boot sector changes needed, but not good for graphics or RAM intensive programs.
Other recommended alternates to Parallels (paid) are VM Fusion (paid) and VirtualBox (free download from Oracle.com).

Very Urgent !!!! Windows Crashing when running a LabVIEW Program using Comact DAQ Chassis

I am using a Compact DAQ Chassis with a AI and a DO Card. The chassis is connected to the USB post of the computer. ( There is no other device connected to the laptop.) When the program is running, WIndows crash and gives a stop error. This has happened several times. Please help.
Thanks.

Hi,
I have a few questions for you, so that we may better troubleshoot your issue.
1. Are you able to view the device in MAX and communicate with it?
2. Could you attach a screen shot of the error you are receiving?
3. Have you been able to use this cDAQ chassis without the modules in it? Do you see the same behavior?
4. Have you tried using this chassis with another laptop? Do you see the same behavior?
If you would like to speak with an Applications Engineer directly, please visit ni.com/ask and create a service request.
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

I have some software problems of running matlab script node in the LabVIEW program.

Hi there,
I wrote a simple matlab code, like x= 1, y = x*2. Then I tried to put them into matlab script node in LabVIEW.
However, when I ran the program, I couldn't run and Labiew show some error.
Then I tried the method talked before on this forum. Please see the following link.
http://forums.ni.com/ni/board/message?board.id=MathScript&thread.id=571
I followed the instruction and open the "command prompt," type some commands then I could run the program, and simultaneously, the LabVIEW program open "Matlab command line window" and run my labview code. However, if I didn't use the command prompt, the "matlab command window" will not be opened by running the labview program. It would just show some error. And even if I turn on the matlab program in advance, I still couldn't run the labview program.
Is there any effecient way to deal with this problem without using "command prompt?" Because I try another PC with both matlab and labview installed on it, I "can" run my simple matlab script node on it, and it will open the matlab command line window automatically by running my code. Therefore, I thought there might be some software linking problems in the previous PC I used . Do you have any ideas?
Thanks in advacne.

This board is for Mathscript, but you seem to have a matlab problem. You should probably post in the LabVIEW forum instead.
What is your LabVIEW version? What is you matlab version?
LabVIEW Champion . Do more with less code and in less time .

Auto Tune prior to running motion control program (LabVIEW)

Hi,
I am controlling Parker Compumotor (404-LXR) linear servo table via GV6 drive and PCI-7344 motion controller.
The problem is that I always have to run automatic tuning in MAX when I turn off all the system and restart it.
Before I use the automatic servo tuning in MAX, the servo table buzzes and oscillates wildly. Cabling seems to be successful as linear servo motor is completely controlled by LabVIEW after auto tuning in MAX.
I wonder how I can just run my LabVIEW program without running Auto Tune step.

Hello Gino,
Thank you for using our discussion forums. Yes, you can programmatic load the PID parameters from LabVIEW. Tune your servo using auto tune, once you are satisfied with the response look under the Control Loop tab for the PID parameters. In LabVIEW use the Load All PID Parameters.flx and use the tuned parameters from Measurement and Automation Explorer as the PID Parameters input for this VI. Place the VI before the multistart.vi. This will make sure the correct PID settings are used. I hope this helps you out. Have a nice day!
Regards,
Nipun M
Applications Engineer
National Instruments

Is SilverLight compulsory for running a Labview program?

Similar Messages

Maybe you are looking for