Is skype web supports on google chrome in linux

is there any way to open skype web in google chrome in linux

Yes, you should be able to open https://web.skype.com on Chrome on Linux. Calling is not yet supported though.
Are you facing any problems when you open Skype for Web?

Similar Messages

Just bought an iPhone 5C.. Safari is non-functional! A blank frozen screen! Any one else experience this? Horrid design Apple! It's your freaking web browser! Google Chrome works but not Safari! I may simply return this "upgrade" unless someone can help

Just bought an iPhone 5C.. Safari is non-functional! A blank frozen screen... What gives? Safari is Apple's browser for gods sakes! Google Chrom works but not Safari? This is nuts. This is an "upgrade"?? Anyone else experiencing this? Or should I just give up and return this

Are you always like this?
First try a Reset: Hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons.

Lack of support for Google Chrome in forced-use email app

If this isn't resolved, I will cancel all Verizon services. Am seeing a consistent decline in VZ services:
1. ghosting and massive digital artifacts in HD programming, INCLUDING "Premium" channels
2. HD set top box quality is very poor
3. High pricing
4. VZ has terminated use of preferred browser (Chrome, which is SECURE and much faster than any others) in new forced-use email client.
As expected, VZ is acting once again as if they were "the phone company".
Not true.
Expect this post to be taken down quickly.

Going to side with Justin here as well (and those of us who have been here for a while know, like ourselves, that he isn't a Verizon employee) ... the issues being described are indicative of a local inside wiring problem (poor cabling, loose connections, unterminated/noise introducing cable outlets, etc.). Since the TV is indicating problems, it's likely also interfering with the MoCA signal to the modem which would result in internet issues as well.
I can second my experience with Chrome as well ... it works just fine with Verizon webmail. Just tried it again to be sure.
If you are encountering problems, it would be helpful if you could be more specific. I suspect the you have an anti-virus / malware product that is probably set to block certain kinds of traffic (like Javascript, etc.) that is potentially interfering. The solution in such cases is to whitelist the Verizon site as a known location -- how to do that however is a function of your anti-virus/anti-malware product.
As for cost, I've been a customer for several years now. My rate went up by $10 once in that time and I ended up rebundling my STB's and essentially negating that increase. Compared to my cable provider -- who I continue to evaluate every year for cost/speed (while I like FiOS, I believe in fair competition and the best price / speed will always win my business) -- they are still the best deal for my money (don't get me wrong, cheaper or more bundle optons would be better!). YMMV.

E4200 Web-based User Interface having problems in Google Chrome 8 web browser

Setting up a new E4200. My main web browser is Google Chrome (and Chrome has worked well with all of my other Linksys products, and that's a lot of products .
The problems:
1) The warning message that pops up (when using IE8) about changes in the Web UI breaking Cisco Connect's ability to manage the router does not appear.
2) The "DHCP Reservation" button on 'Setup / Basic Settings' does not pop-up, making it impossible to make changes to the DHCP table in Chrome. Works fine in IE8.
NOTE: The "DCHP Client" button on 'Status / Local Area Network' does work, so it appears that some pop-ups are working but not all.
NOTE: I don't customize my Google Chrome settings with regards to pop-ups and haven't seen this problem with any other site (well, except for some Oracle web applications that are years old, but those don't work in FireFox either and appear to have IE6-specific code).
Platform: Windows 7 Ultimate 64-bit, Google Chrome 8, E4200 firmware 1.0.0
(Mod note: Edited for guideline compliance.)

i use chrome and firefox but 99.8% is used on chrome. i have no issues. i do not use the cisco connect CD. it causes more harm than good. the warning is correct. you can break some things on the web based UI if you use the CD...

PTWC in google chrome

I just tested out a portlet that I wrote using the pt web controls in google chrome.
Inside the portlet, i put styles specific to the portlet, usign the $$TOKEN$$ method
When i submit the postback, the styles come back and it looks like chrome comments them out. when I inspect the element, the <style> tag in the portlet is surrounded in comments. Have you seen this before?

had to include it in teh head..... i like how chrome forces you into best practices:)
<span xmlns:pt='http://www.plumtree.com/xmlschemas/ptui/'>
<pt:common.includeinhead>
<pt:namespace pt:token="$$TOKEN$$"/>
<style type="text/css">
#pt-portlet-$$TOKEN$$ .my_class
</style>
</pt:common.includeinhead>
</span>

Google Chrome constantly crush on Yosemite

I got the "trash can" model of Mac Pro for about a month and upgraded to the new Yosemite OS. I'm actually surprised to find that the mac pro is not in new OS by default.
Anyway, I found that I Google Chrome constantly crush especially when I'm browsing video websites.
Not "sometimes" but constantly crush. On average, I need to force restart about more than twice every single day.
I remember when I used google chrome on macbook air years ago..... I never had any crush problems let along freeze and force restart.
Why is this happening on the flagships of mac?
I could only think of there possible reasons:
1. Bad support of google chrome (or generally google product).
    However, as I stated above, I never had google product issue when using my old macbook air.
2. If it is working fine on my old mac then the problem might be the new Yosemite OS?
   Isn't newer OS usually better? I can still remember how good I felt when I just switched from snow leopard to Lion.
3. If the problem is not in OS then Mac Pro?
    So a pro line work station cannot out perform macbook air in browsing websites?
4. Maybe due to the fact that I use a 4K monitor? Since I notice full screen youtube is not fluent on my 4k monitor.
    As we all know apple still not annoying a official 4K monitor. Maybe this is the reason why it preform bad on mine. But wait, isn't is written on the website that mac pro can actually handle 3 4k monitors at once? So using 1 is not supported?
I really think its a awesome mac when I work on my video and photo softwares, but constantly crush when using google chrome is just a pain in the S.
It's usually fine using Safari but I think chrome is faster and the extensions are so versatile compare to Safari.
ZYZ

Chrome is a resource hog, which may be why you are having problems with it.

[SOLVED] Google Chrome vs Chromium

A few months ago while visiting Youtube, I noticed it was asking me to install google chrome. So I realized the Linux version is finally out. So I googled for it and installed it on my Ubuntu laptop under the name of google-chrome. Then I tried to install it on my 64 bit Arch Linux machine. I googled for it, but didn't find anything. I tried to search for it on pacman, but I only found Chromium. I installed it, and it looked exactly the same as my google-chrome on ubuntu.
Today, I got confused whether or not chromium is the same as google-chrome. I read somewhere that chromium is the ported version of windows google-chrome for Linux while there's a separate version of google-chrome for linux, named google-chrome. I don't find any differences between my google-chrom on ubuntu and chromium on Arch, but I'm really confused.
Would be glad if someone tells me what is what.
Thanks in advance.
EDIT: I just found my answer at: http://code.google.com/p/chromium/wiki/ … ogleChrome
Last edited by mohtasham1983 (2010-02-04 23:23:30)

Yep that link explains it all straight from the horses mouth so to speak.
Basically chromium is the open source projected created by Google and google-chrome is a slightly modified version, google branded version of the browser that comes in binary form.

I cannot send a web page while in Safari. I get a message saying Google Chrome will not support it? Help1

I cannot sent a web page while in Safari. I get a message saying that Google Chrome will not support it. Help!

Launch the Mail application and select Mail > Preferences > General > Default email reader: Mail

Google Chrome Web App

Ich habe mir Ski Safarie aus dem Google Chrome Web App runtergeladen. Dies ist ein Online-app. Welches Programm muss ich runterladen um dies spielen zu können??
http://lostforgames.com/games/ski-safari/?play
das ist der Link zu diesem Spiel.

December 2014, Microsoft released a CU that blocked LWA and displayed "Google Chrome no longer supports Lync Web App":
https://support.microsoft.com/en-us/kb/3025563 in preparation for Chrome blocking NPAPI plugins in January 2015.
February 2015, Microsoft released a CU to bring back the functionality:
https://support.microsoft.com/en-us/kb/3038437 by working around the Chrome blocking of NPAPI plug-ins and prompting the user for an "External Protocol Request" acceptance.
As of Chrome version 42 (April, 2015), the default setting is to disable NPAPI. Scott has a great blog posting about this and workarounds:
http://blogs.technet.com/b/scottstu/archive/2015/04/16/potential-impact-on-lync-and-skype-for-business-meeting-join-experience-when-google-chrome-is-the-default-browser.aspx
The removal of NPAPI from Chrome was first announced in September 2013 and my understanding is the new Skype For Business Web App Plug-in doesn't use this API anymore. I've joined a few Microsoft meetings using the new Plug-in and have had no issues in Chrome.
That being said, until the server product is released you can never be sure what will be included at RTM.
Additional details of NPAPI:
http://venturebeat.com/2014/11/24/google-chrome-will-block-all-netscape-plugin-api-plugins-in-january-drop-support-completely-in-september/
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

WHY CAN'T I LOGIN TO MANY WEB SITE WITH FIREFOX BUT CAN WITH INTERNET EXLORER 8 AND GOOGLE CHROME

I just installed firefox 3.6.8 on a new computer, it worked fine for a few days but now I cannot login to several sites that require usernames & passwords. (citezens bank online, (chase freedom credit cards online) medco mail order prescripions online. etc. Some of the sites say that I must have java script enabled, but if I go to firefox tools/options/content it shows java script enabled. I can login fine with internet explorer 8 and google chrome. I have firefox 3.6.8 on my old computer that has dial up internet access and it works fine. On the citizens bank web page the words "login" appear in a box, but when I click on it nothing happens & no boxes for usename or password show up. on the medco login page no lotin related words appear. They do with IE8 & google chrome. On chase freedom the login boxes are there but when I enter my password, after a few seconds the password disappears & nothing happens. The other browsers work fine . I believe that on one of the sites there is a message about "scripting being necessary" I cannot find any info about scripting it I do a search for it.

Hello.
Hopefully this support article is what you need:
http://support.mozilla.com/en-US/kb/Cannot+log+in+to+websites

OWA 2013: Insecure Content javascript error in Google Chrome when attempting to launch Edit in Excel from Office Web Apps 2013

I'm unable to launch an excel file in the Client App from OWA using google chrome. I am able to open the excel file in the web application, but when clicking "Edit Workbook" and selecting "Edit Excel" the file never opens.
Opening developer mode shows a javascript error. This error comes back as:
[blocked] The page at 'https://owa.mysite.com/x/_layouts/xlviewerinternal.aspx?ui=en%2DUS&r…g%2Fsites%2Fmiketest%2Ftestlib%2FForms%2FAllItems%2Easpx&wdEnableRoaming=1' was loaded over HTTPS, but ran insecure content from 'ms-excel:ofv|u|https://intranet.mysite.org/sites/miketest/testlib/SitePageVerification.xlsx':
this content should also be loaded over HTTPS.
Both sites are using https, so I'm unsure what the error is about. Any ideas?

Hi Michael,
According to your description, my understanding is that you got an error when you tried to edit excel in client application with Chrome.
Per my knowledge, when you open or edit documents(from SharePoint library) in client application, it requires Open Documents ActiveX controls. Open Documents ActiveX controls limitations on browsers which do not support ActiveX. Currently only 32-bit versions
of Internet Explorer support this functionality. So , for resolving your issue, I suggest you use IE 32-bit.
More indormation, please refer to the link below:
http://technet.microsoft.com/en-us/library/cc263526.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

I am trying to watch videos online, but a message saying "You are currently browsing the web with Google Chrome..."

I have a MacBook Pro, which I just bought in August.
When I try to watch videos on my computer, a message pops up saying, "You are currently browsing the web with Google Chrome and your Video Player might be outdated." I know it's a pop up, but I don't know how to get rid of it and watch videos on my computer. I did look it up online and I downloaded the TSM Adware Removal Tool, which removed some adware files. Then I also downloaded Bitdefender Virus Scanner from the app store to scan my entire computer - nothing came up.
Please help me solve this problem. Thanks.

The update alerts are fake, and are intended to dupe you into installing malware or disclosing private information so that your identity can be stolen.
You might get the alerts when visiting a website that has been hacked. Don't visit the site again. If applicable, notify the site administrator of the problem, but don't send email to an unknown party.
If you get the alerts when visiting more than one well-known website, such as Google, YouTube, or Facebook, then they're almost certainly the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to those sites are redirected to a server controlled by the attacker. It's possible, but less likely, that the DNS server used by your ISP has been attacked, but you should assume that the router is at fault until proven otherwise.
The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert the end of a straightened paper clip or a similar tool and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
After resetting the router, quit the web browser and relaunch it while holding down the shift key. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Do the equivalent if you use another browser. Open the Downloads folder and delete anything you don't recognize.
Then go through the router's initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option. Most do.
2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits. Don't use the default password or any other that could be guessed. Save the password in your keychain. Any password that you can remember is weak.
3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set a different strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts.
Check the router manufacturer's website for a firmware update.
If you downloaded and installed what you thought was a software update, ask for instructions.

Google Chrome and Skype Won't Start / Crashing After 10.9.2 Update

I installed 10.9.2 today and am unable to start Google Chrome, Google Chrome Canary, or Skype. All 3 of them seem to be failling on the same piece of code ("FillInSystemVersionInfoFromString"). Has anyone else seen this issue? Could it be related to some other conflicting software? I don't see the issue with any other installed applications, and the same thing happens when I try starting the apps from a brand new user account. I also already tried to re-seat the 4 RAM sticks, no dice.
Chrome crash report:
Process:         Google Chrome [1781]
Path:            /Applications/Google Chrome.app/Contents/MacOS/Google Chrome
Identifier:      com.google.Chrome
Version:         33.0.1750.117 (1750.117)
Code Type:       X86 (Native)
Parent Process: launchd [1575]
Responsible:     Google Chrome [1781]
User ID:         502
Date/Time:       2014-03-03 15:51:26.020 -0500
OS Version:      Mac OS X 10.9.2 (13C64)
Report Version: 11
Anonymous UUID: 9A44A608-31C5-4660-44AD-1A225FD73339
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000fffc4085
VM Regions Near 0xfffc4085:
    Stack                  00000000bf7ae000-00000000bffae000 [ 8192K] rw-/rwx SM=COW
-->
    Submap                 00000000ffff0000-00000000ffff1000 [    4K] r--/r-- SM=PRV process-only VM submap
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_c.dylib                  0x9826111e __svfscanf_l + 3887
1   libsystem_c.dylib                  0x982693b2 vsscanf_l + 952
2   libsystem_c.dylib                  0x9825a3ec sscanf_l + 41
3   com.apple.HIServices               0x91d1a78d FillInSystemVersionInfoFromString + 183
4   com.apple.HIServices               0x91d193c8 _RegisterApplication + 5582
5   com.apple.HIServices               0x91d17df3 INIT_Processes + 65
6   com.apple.HIServices               0x91d3d15c ProcessInformationCopyDictionary + 173
7   com.google.Chrome.framework        0x00843750 0x5a000 + 8296272
8   com.google.Chrome.framework        0x001be735 0x5a000 + 1460021
9   com.google.Chrome.framework        0x02faf949 0x5a000 + 49633609
10 com.google.Chrome.framework        0x02fb513c 0x5a000 + 49656124
11 com.google.Chrome.framework        0x02faf32a 0x5a000 + 49632042
12 com.google.Chrome.framework        0x007de7b3 0x5a000 + 7882675
13 com.google.Chrome.framework        0x007df25f 0x5a000 + 7885407
14 com.google.Chrome.framework        0x007de620 0x5a000 + 7882272
15 com.google.Chrome.framework        0x0005cc59 ChromeMain + 41
16 com.google.Chrome                  0x00053f78 main + 24
17 com.google.Chrome                  0x00053f55 0x53000 + 3925
Skype crash report:
Process:         Skype [1943]
Path:            /Applications/Skype.app/Contents/MacOS/Skype
Identifier:      com.skype.skype
Version:         6.12 (6.12.0.438)
Code Type:       X86 (Native)
Parent Process: launchd [1575]
Responsible:     Skype [1943]
User ID:         502
Date/Time:       2014-03-03 16:07:22.271 -0500
OS Version:      Mac OS X 10.9.2 (13C64)
Report Version: 11
Anonymous UUID: 9A44A608-31C5-4660-44AD-1A225FD73339
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000fffc4085
VM Regions Near 0xfffc4085:
    __LINKEDIT             00000000d0006000-00000000d0008000 [    8K] r--/rwx SM=COW /Applications/Skype.app/Contents/Frameworks/Skype.framework/Versions/A/Skype
-->
    Submap                 00000000ffff0000-00000000ffff1000 [    4K] r--/r-- SM=PRV process-only VM submap
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_c.dylib                  0x9826111e __svfscanf_l + 3887
1   libsystem_c.dylib                  0x982693b2 vsscanf_l + 952
2   libsystem_c.dylib                  0x9825a3ec sscanf_l + 41
3   com.apple.HIServices               0x91d1a78d FillInSystemVersionInfoFromString + 183
4   com.apple.HIServices               0x91d193c8 _RegisterApplication + 5582
5   com.apple.HIServices               0x91d17df3 INIT_Processes + 65
6   com.apple.HIServices               0x91d17d8e GetCurrentProcess + 29
7   com.apple.HIToolbox                0x90210218 MenuBarInstance::GetAggregateUIMode(unsigned long*, unsigned long*) + 40
8   com.apple.HIToolbox                0x9000fb0f MenuBarInstance::IsVisible() + 49
9   com.apple.HIToolbox                0x9000f918 IsMenuBarVisible + 19
10 com.apple.AppKit                   0x9ae6c506 _NSInitializeAppContext + 62
11 com.apple.AppKit                   0x9ae6b6ab -[NSApplication init] + 746
12 com.apple.AppKit                   0x9ae6b1da +[NSApplication sharedApplication] + 153
13 com.skype.skype                    0x0000fff4 0x1000 + 61428
14 com.skype.skype                    0x000035d5 0x1000 + 9685

Here is my etrecheck output as well:
Hardware Information:
    iMac (27-inch, Late 2012)
    iMac - model: iMac13,2
    1 3.4 GHz Intel Core i7 CPU: 4 cores
    32 GB RAM
Video Information:
    NVIDIA GeForce GTX 680MX - VRAM: 2048 MB
System Software:
    OS X 10.9.2 (13C64) - Uptime: 0 days 1:35:4
Disk Information:
    APPLE HDD ST3000DM001 disk1 : (3 TB)
        EFI (disk1s1) <not mounted>: 209.7 MB
        disk1s2 (disk1s2) <not mounted>: 3 TB
        Recovery HD (disk1s3) <not mounted>: 650 MB
    APPLE SSD SM128E disk0 : (121.33 GB)
        EFI (disk0s1) <not mounted>: 209.7 MB
        disk0s2 (disk0s2) <not mounted>: 120.99 GB
        Boot OS X (disk0s3) <not mounted>: 134.2 MB
USB Information:
    Apple Inc. FaceTime HD Camera (Built-in)
    FiiO FiiO USB DAC-E17
    Razer Razer DeathAdder
    Apple Inc. MacBook Air SuperDrive
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
    Apple Inc. thunderbolt_bus
Kernel Extensions:
    org.virtualbox.kext.VBoxDrv    (4.3.2)
    org.virtualbox.kext.VBoxUSB    (4.3.2)
    org.virtualbox.kext.VBoxNetFlt    (4.3.2)
    org.virtualbox.kext.VBoxNetAdp    (4.3.2)
Launch Daemons:
    [System]    com.livescribe.PenCommService.plist 3rd-Party support link
    [System]    com.microsoft.office.licensing.helper.plist 3rd-Party support link
    [System]    com.oracle.java.Helper-Tool.plist 3rd-Party support link
    [System]    org.virtualbox.startup.plist 3rd-Party support link
Launch Agents:
    [System]    com.oracle.java.Java-Updater.plist 3rd-Party support link
User Login Items:
    None
Internet Plug-ins:
    QuickTime Plugin: Version: 7.7.3
    Default Browser: Version: 537 - SDK 10.9
    o1dbrowserplugin: Version: 5.1.5.17733 3rd-Party support link
    SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
    npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
    googletalkbrowserplugin: Version: 5.1.5.17733 3rd-Party support link
    JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
    Java 3rd-Party support link
Old Applications:
    Solver:    Version: 1.0 - SDK 10.5 3rd-Party support link
        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
    /Users/dkerrigan/Library/Application Support/WebEx Folder/1324
        convertpdf:    Version: 1.2 - SDK 10.5 3rd-Party support link
        Cisco WebEx Meeting Center:    Version: 1301.05.2809.0 - SDK 10.5 3rd-Party support link
        asannotation2:    Version: 1206.25.2804.0 - SDK 10.5 3rd-Party support link
        atmsupload:    Version: 1209.12.2806.0 - SDK 10.5 3rd-Party support link
    /Users/dkerrigan/Library/Application Support/WebEx Folder/1326
        Cisco WebEx Event Center:    Version: 1209.12.2806.0 - SDK 10.5 3rd-Party support link
        convertpdf:    Version: 1.2 - SDK 10.5 3rd-Party support link
        asannotation2:    Version: 1206.25.2804.0 - SDK 10.5 3rd-Party support link
    Audacity:    Version: 2.0.5.0 - SDK 10.4 3rd-Party support link
        /Applications/Audacity/Audacity.app
    /Applications/Microsoft Office 2011/Office
        Microsoft Graph:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        Microsoft Database Utility:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        Microsoft Office Reminders:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        Microsoft Upload Center:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        My Day:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        SyncServicesAgent:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        Open XML for Excel:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        Microsoft Alerts Daemon:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        Microsoft Database Daemon:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        Microsoft Chart Converter:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        Microsoft Clip Gallery:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
    /Applications/Microsoft Office 2011
        Microsoft PowerPoint:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        Microsoft Excel:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        Microsoft Outlook:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        Microsoft Word:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        Microsoft Document Connection:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
    Microsoft Language Register:    Version: 14.3.9 - SDK 10.5 3rd-Party support link
        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
    Microsoft AutoUpdate:    Version: 2.3.6 - SDK 10.4 3rd-Party support link
        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
    XLD:    Version: 20131102 - SDK 10.4 3rd-Party support link
    Livescribe Desktop:    Version: 2.8.3 - SDK 10.5 3rd-Party support link
Time Machine:
    Time Machine not configured!
Top Processes by CPU:
        19%    firefox
         6%    WindowServer
         2%    EtreCheck
         0%    mdworker
         0%    coreservicesd
Top Processes by Memory:
    492 MB    firefox
    328 MB    mds_stores
    164 MB    WindowServer
    164 MB    com.apple.IconServicesAgent
    131 MB    softwareupdated
Virtual Memory Information:
    26.01 GB    Free RAM
    2.57 GB    Active RAM
    1.69 GB    Inactive RAM
    1.73 GB    Wired RAM
    1.38 GB    Page-ins
    0 B    Page-outs

I can open the web site (Chemistry) but the links within won't work, however they will in Google Chrome

I can open the web site (Chemistry) but the links within won't work, however they will in Google Chrome.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I have 9 Soundcloud widgets on my web page, none of them work. They use HTML 5 which works on Google Chrome and Internet explorer. Do you have a fix for this ?

I have 9 Soundcloud widgets on my web page, none of them work. They use HTML 5 which works on Google Chrome and Internet explorer. Do you have a fix for this ? I am using Firefox V 20.0.1

Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Is skype web supports on google chrome in linux

Similar Messages

Maybe you are looking for