Is SOA Essential training needed for SOA Suite 10g: Services Orchestration?

Is SOA Essential training needed for SOA Suite 10g: Services Orchestration? or Should I proceed with Services Orchestration?

No, essiantials is just a two day high level overview. The 5 day training is in-depth training on the SOA suite. I advice to do 5 day training.
Marc
http://orasoa.blogspot.com

Similar Messages

  • Appropriate windows platform for developer suit 10g release 2

    hi
    i've installed developer suit 10g on windows xp sp2 but it does not work properly
    can anyone tell me which is appropriate windows platform for developer suit 10g release 2
    thank U

    Hello,
    another solution : edit the file cauprefs.ora in ORACLE_HOME and modify the following values :
    Reports.root_ht = 480
    Reports.root_max = No
    Reports.root_wd = 640
    Reports.root_x = 0
    Reports.root_y = 0
    Regards

  • Requirements for JDBC Driver needed for SOA 8 }connection pool

    Hi,
    I have an AS400 jdbc driver. This driver is JDBC API version 2.x. Also is a Driver Type 4.
    What are the requirements of a JDBC Driver needed for connection pool in SOA 8?
    Thanks.
    Lorenzo Jimenez

    You can use pretty much any jdbc driver, including type 2 and type 4.
    You need to make sure your shared libraries needed by the driver are available to the appserver when you boot.
    Other than that, it is no different than configuring any other driver.

  • NEWBIE SOA Question:Appl Development for SOA

    This question may have been answered elsewhere; if so, my apologies.
    As a newbie to SOA, I am trying to wrap my head around the question of how app. development for SOA differs from traditional models. For example, non-SOA environments there are few external considerations when coding a process,
    but in SOA environments, I understand everything is a service.
    Can someone provide a few code snippets as to how they would look in each environment?
    I have read through several documents on SOA and have done the SOA tutorial, etc. but I have yet to see a side-by-side comparison of application code in SOA and non-SOA environments.
    How would an architect plan the translation and mapping of business objectives and functional requirements into a technical solution for SOA, architecting the SOA solution ?
    I would really appreciate any pointers (links to articles, etc.) in this direction. Thank you.
    Gordon

    Hello Gordon,
    SOA (Service Oriented Architecture) - as the name indicates, it's design is based on services. SOA is another integration technique which is used for small scale integration. SOA is an approach to have software resources in an enterprise available and discoverable on network as well defined services. Each service would achieve a predefined business objective and perform discrete units of work. The services are independent and do not depend on the context or state of the other services. They work within distributed systems architecture.
    Few links which may help you in understanding SOA and it's design patterns -
    http://blogs.oracle.com/jeffdavies/2008/10/architects_dictionary.html
    http://www.oracle.com/technology/tech/soa/mastering-soa-series/part1.html
    http://www.oracle.com/technology/tech/soa/mastering-soa-series/part2.html
    http://www.oracle.com/technology/tech/soa/mastering-soa-series/part3.html
    http://www.oracle.com/technology/tech/soa/mastering-soa-series/part4.html
    http://www.oracle.com/technologies/soa/docs/soa-bp-design-patterns-whitepaper.pdf
    http://www.oracle.com/technology/pub/articles/erl_soa_design_patterns_app_sequences.html
    http://www.oracle.com/technology/oramag/oracle/09-sep/o59architect.html
    http://www.oracle.com/technology/pub/articles/tech_arch.html#soa
    Regards,
    Anuj

  • Integrate Forms and Reports for Developer Suite 10g

    Hi all,
    One of my client is moving to Developer Suite 10g R2. Currently he is using Version 6i. I've converted the forms into 10g. Only one problem being faced by me is Reports. Our form which used
    to call the reports was using Run_Product. Now, I've changed the functionality to Run_Report_Object. The problem is i need to create a report node in the form for every report. I've 200 reports. If there is any
    way, where i can add the report node in the form module dynamically, this will reduce my work to a greater extent.
    Regards,
    Alok Dubey

    hello,
    It is quite easy to add a report node using the JDAPI.
    1) Put all the forms in a directory.
    2) Find the JDAPI example in the online help.
    3) Modify it in order to have the functionality: add report item
    4) IF you are certain there are no report nodes already attached, you don't need to loop through your form module in order to check for existing report nodes.
    If you are not tempted to write your own routine, you can use francois degrelle'S own JDAPI batch process.

  • Urgent!! Deploy reports for Developer suite 10g (Newbie)

    Hi All,
    I've generated few jsp report using report builder from developer suite 10g. I know in the developer suite 9i. I just copy these jsp files under \reports\j2ee\web. Then start OC4J Instance, and type in from browser as http://localhost:8888/reports/testreport.jsp?userid=username/password@dbconnection. However, it doesn't work for 10g. Is there any different in deploy report for 10g? Please help....
    Thanks,
    Best Regards,

    Andy,
    It's impossible to help us if you doesn't specify what error messages you get?
    If I should take a guess, you're using the wrong port number. Did you check if it's correct before posting your message? Most Developer Suite 10g installations comes with port number 8889.
    Regards,
    Martin Malmstrom

  • Download link for Developer Suite 10g 10.1.2 for Windows not working

    I cannot download Oracle Developer Suite 10g 10.1.2 for Windows. The link redirects to the Application Server download page following the license agreement.

    I downloaded it a few minutes ago and it opens ok.
    But the file size is 671 825 075 instead of the (626,122,752 bytes) written on the DS 10g for Windows page.

  • Configuration needed for SOA call to create PO in classic scenario

    Dear Experts,
    We are working in the SAP SRM 7.01 with backend system on ecc 6.0 Enhancement pack 5. The scenario configured is classic scenario.
    I want to know what are the configurations needed to use SOA calls to create a purchase order in the backend system.
    In the system landscape directory, when I use the system type "ERP_3.0" for backend system, the system uses the BAPI 'BAPI_PO_CREATE1' to create a purchase order in the backend system.
    When we use the system type "ERP_4.0", it does not use the BAPI 'BAPI_PO_CREATE1' to create purchase order. It tries to use SOA calls to create PO in the backend system. However, it fails to create one.
    Could you please let me know what are the settings we need to do to create a purchase order in the backend system?
    Thanks and regards,
    Ranjan
    Ranjan Sutradhar

    Hi Vardhan,
    Can you be a little clear? are you using PDP scenario as in your requirements are coming as PR from ECC into SRM as SC? Is this the scenario?
    Regards,
    Nikhil

  • Configuration needed for SOA ,BPM,OSB,BAM

    HI,
    Could any one suggest best configuration System to run all SOA products parallayly as shown below..
    SOA ---? (eg.2GB RAM)
    BPM--?
    OSB---? (1GB)
    BAM---?
    Database ---? (ForMeta data repository)
    do we have 64 bit software for above..I could see only 32 bit version in Oracle download page?
    Thanks
    Sivakumar
    Edited by: siva p on Jun 23, 2012 12:11 PM

    Hi Siva,
    I have ran all the softwares on my system with 8GB but had issues running all of them at the same time. I would say, go with 16 GB (6-8 cores) system in DEV.
    SOA ---? (eg.2GB RAM)2GB for DEV
    BPM--?2GB for DEV
    OSB---? (1GB)2GB for DEV
    BAM---? 1GB for DEV
    Database ---? (ForMeta data repository)1GB for DEV (use XE database); you would require 2-3 GB if you want to run Oracle 11g DB
    do we have 64 bit software for above..I could see only 32 bit version in Oracle download page?All the softwares are available in 64 bit and you can download them here: http://www.oracle.com/technetwork/middleware/soasuite/downloads/index.html
    Thanks
    Sivakumar
    Edited by: siva p on Jun 23, 2012 12:11 PMHope this helps!
    Cheers,
    NJ

  • Recoding to eliminate the need for PLSQL_NAME_RESOLUTION in 10g

    Up until now (in forms 6i) we've been using this workaround, as we have quite a lot of instances in forms libraries where a procedure in the library calls another procedure back in the form. We're now going to forms 10g and realise we need to recode, as this isn't recommended and the workaround isn't supported.
    I've already replaced quite a few of the procedure calls in the libraries with execute_trigger commands, but am not sure what to do about those with parameters. For example, in 1 of our libraries we have:
    procedure report_params(param1, param2) is
    begin
    null;
    end;
    further up in the library is a call to this proc. But this one's only there for compilation - at the moment, the procs in the forms (with the same name) override this one. They all have this library attached. For ones like this with no params, I've been using execute_trigger. But what's the neatest way to deal with the procedures with params?

    Package variables work great. Create a package spec in your PLL library with the variables you need to pass. Then, you can address these variables from both the PLL procedures as well as from anywhere in the form.
    However, be aware that each time you add another variable to the package spec, any form that uses any variable in the package spec must be recompiled.
    If you use form parameters from the PLL procedure, you will need to use the Copy built-in to set their values. Due to the above problem, if you expect to be changing the list of package variables often, then maybe the form parameters is a better solution.

  • Software need for oracle rac 10g r2

    Hi,
    Can any one please give the exact link to download the Oracle Rac 10g r2 for the setup of rac.
    Thanks & Regards,
    Poorna Prasad.

    Hi,
    On linux rhel4 we are installing the Rac .I am new to this high technology i need to create a rac set up on my own can any one please help me
    Here is the details of our san storage
    I am going to implement the RAC set up on my san storage .Here i am having 3 blades in my san and each blade is divided in to 4 parts as Vm1,vm2,vm3.vm4 virtual machines here i need to setup the rac database on vm4 virtual machine can any one please help me how to follow .
    Here first i need to configure the shared disk storage before installing the rac.
    And on vm3 virtual machine we have installed the oracle database 10g software.
    The rac configuration is between vm4 virtual machin on blade1 and vm4 virtual machine on blade2.
    Please help me.

  • Installation Guide needed for Oracle RAC 10G R2 Linux x86-64

    Hello All,
    Can someone point me to the Oracle documentation on installing Oracle RAC 10G R2 (10.2.1.0) for Linux x86-64?
    Seem unable to find the required doc.
    I greatly appreciate your help!
    Thanks!

    Additional to documentation which you can access and search from http://tahiti.oracle.com there are several good step by step installation articles which summaries documentation.
    http://www.oracle.com/technology/pub/articles/tech_dba.html#linux
    And you can find more similar articles at
    http://www.puschitz.com/
    http://www.oracle-base.com/articles/linux/ArticlesLinux.php

  • Endeca V11 - Need for restarting Endeca Tools Service After Promoting to Production

    Hello Friends,
    We have setup the process on staging where once the business user(S) promote content, it exports the Workbench content config & Search config to their respective ZIP files, and the production assembler/mdex gets updated... but for some reason, if there is a new page.... added in staging workbench.... prior to export... the new page doesnt appear in production without retstarting the ENDECA TOOLS SERVICE.
    Appreciate, all help / ideas?
    Regards,
    Keyur

    Hello Everyone,
    We have 2 CAS and 4 Mailbox server that were installed from SP1 and seeing the same issue.  This is a clean install still with no mailboxes migrated over as of yet.  Opened a case with MS.  also ran:
    Add-GlobalMonitoringOverride
    -Identity Exchange\ActiveDirectoryConnectivityConfigDCServerReboot  -ItemType Responder -PropertyName Enabled -PropertyValue 0 -Duration 60.00:00:00
    Waiting
    for MS to get back and to see how this workaround does.  Seems like the original issue was not resolved completely?
    Will
    post back when we get an update.  Changing the DirectoryActiveMonitoringContext.xml and the above workaround do not seem suitable for us.  We would like to see a complete resolution for this.
    Good
    luck!

  • Essential System Updates for Microsoft Windows Vista Service Pack 1 (SP1)

    Hi, I want to know if this is applicable to sp2 as well. I don't know why there is not one for sp2. I have a hpg60 laptop and this is listed on the drivers page.
    This question was solved.
    View Solution.

    It is just a rollup of Vista updates. All are included in SP2 so you can forget about it. Just apply SP2 (as you did) and run a full MS update and you will be fine.

  • Report on Training need management

    Hello,
    we have to report on training needs by employee with delivery method : we need a report to show booked and not booked for all training needs for all employees with the delivery method of the training.
    Is there a standard report? can we create a query?
    please advise
    BR,
    K.

    There is no standard report for this.
    You can create a query BUT your requirements won't be met in a single query. Report on employees booked for trainings is easy. Remember though, that ad hoc query only displays EXISTING records not records that are not there e.g. employee who ARE NOT booked to trainings with certain delivery method.
    Heres what you do: activate the Rel. BE Type/Att in V_T77KV_2 for Person (or other otypes you want to report on). You do this so that you'll have direct relationship between D and P. Remember that Delivery method is stored in the D object type not in E.
    You might have ideas on using E as start object in your infoset. Sure you can display the 'attended by' relationship between E and P but you won't be able to filter by Delivery Method because, like i said, it is stored in the D object type not E. You hear.
    Heres what you do next.
    1. Create a query for the employee population you want to report on e.g. all Permanent employees.
    2. Create infoset with starting object P. Include 034 relationship to D. And all infoytpes of D object.
    3. Create a query for all employee with that population (Permanent Employees) who have relationship P 034 D and then select the Delivery Method as parameter. The search result would show all employees who have attended that training with the delivery method you specified.
    4. You cross-check this list with the result in step 1 to get the list of employees who HAVE NOT attended the training and then wham bam thank you maam. now give me points. lol

Maybe you are looking for

  • How to use Harvester Only Using HarvesterSettings.xml on aia server

    Hi, I have a problem. I can not fix it. The following HarvesterSettings.xml I had to use. <?xml version="1.0" encoding="UTF-8"?> <tns:harvesterSettings xmlns:tns="http://www.oracle.com/oer/integration/harvester" xmlns:xsi="http://www.w3.org/2001/XMLS

  • How to get a dynamically created symbol to delete itself on click?

    Here's the setup... I want to have a dynamically created symbol appear upon click of a hotspot. In this case, you click on a pulsating hotspot and a popup box appears. Here's the code I'm using for that. //Create an instance element of a symbol as a

  • Lost library in iPhoto '08

    We recently purchased a MacBook Pro and have been using iPhoto to organize all of our family photos. All was going great until this evening. At first, iPhoto quit unexpectedly. Then, after we relaunched, the entire Mac froze. We powered down and rest

  • Import Incoming Payments that is partially paid (DTW)

    Hi, I would like to know how to import Incoming Payments with DTW when the invoice that is partially paid? Thanks

  • Constant selection and Reusability

    Hi Gurus, In BI 7.0,I am facing following problem. 1.I am using characteristic say ZSITE as constant selection and we use the data in a particular report. In Other report we are using ZSITE and expected to see different data but we are getting consta