Is Solaris Cluster 4.0 Free?. whether we need any license for using it?

I am able to Download the Solaris Cluster from the Oracle Site. But need to know whether we need any license to use it?

Hello 1577859,
and if you like to get the support updates you need a contract to get access to the Solaris Cluster support publisher.
Hth,
Juergen

Similar Messages

Is oracle lite free or is there any license for Oracle Lite 10g for product

Is oracle lite free or is there any license for Oracle Lite 10g for production use ??
-Thanks-

Please note that Oracle Lite is no longer being actively developed, and no further releases are planned. The recommended small footprint database from Oracle is Berkeley DB.
http://www.oracle.com/technetwork/products/berkeleydb/overview/index-085366.html
Eric

I am trying to change the email address associated with my existing account to free up my university email address for use in obtaining Creative Cloud.

I am trying to change the email address associated with my existing account to free up my university email address for use in obtaining Creative Cloud. Every time I go to the account settings of my existing account (which currently uses my university email, as I set it up years ago and had no idea it'd eventually cause problems), I enter a different email to use for that account but I continuously receive an error message saying "account changes cannot be saved." It makes me think that it's because the email isn't verified (funny, it actually is verified since it has been the alternate email on the old account for years), but when I click the "send verification email" nothing happens (that is, no email is sent to that other email address).
Anyway, my university is now requiring that faculty create new accounts using our university email addresses in order to register/use Creative Cloud. Am I able to delete my old account, or can anyone help me actually change the email address associated with my old account without getting a "changes can't be saved" error?

This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
or
Make sure that EVERY DETAIL is the same in every place you enter your information
-right down to how you spell and punctuate the parts of your name and address
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html

Is mysql a free open source database or do you need a license for it in prd

is mysql a free open source database or do you need a license for it in production.

Hi,
It should be free under GPL (General Public license).Usually it will comes with your operating system distribution (eg:RHEL)
If you download it from Oracle site, it should have the commercial license tied to it, and you need to pay for that if it is in use for production.
http://www.mysql.com/about/legal/licensing/index.html
regards,
mrak

Any samples for using JMX for displaying cluster statistics 3.6 ?

Hi,
Our Coherence 3.6 cluster is configured in the WLS domain and controlled using WLS node manager. This is all working well. We have created a WLS console extension to show the actual live cluster topology (rather than the configured topology) so we can ensure all the domains are configured correctly and there are no nodes in the cluster that there should not be (we have many domains/environments).
I can show basic cluster statistics and show the members etc using the CacheFactory. But for each cluster member I would like to show if it is storage enabled and free memory and other statistics. I was expecting to get that from the Member or Cluster objects returned from the CacheFactory methods but it seems not. It seems that JMX is the way to go. Does anyone have any sample JMX code they might share that would connect to the cluster and retrieve stats and info that is not available from the CacheFactory api ?.
TIA
Martin

Hi Revanth,
The issue seems to be with the JMX URL value defined in the 'server URL' property.
Apparently I ran into the same issue as I was unable to access the Admin Server URL from the SMA.
Changing the Host and Port value properly resolved the issue for me.
Regards,
Anandraj

Installing SOA Suite 10.1.3.4.0 on a Solaris cluster (2 nodes)

Hi All,
I have been looking for guidance on the installation of SOA Suite 10.1.3.4.0 on a Solaris cluster, and have been unable to find any. Does anyone have any info on this task? Or as an alternate question, how different is the cluster setup on Solaris from Linux?
Thanks
Sami

There is no difference on installing a cluster on Solaris or Linux. The main difference are the required O/S packages. The you could follow my approach on installing a cluster:
http://orasoa.blogspot.com/2009/04/soa-cluster-installation.html
Marc

Solaris Cluster - two machines - logical host

Good morning!
I am a complete dummie Solaris Cluster, buuuuuuuuuuuuuuuuuuuut... I need to create a cluster and install an application:
I have two V440, with Solaris 10;
I need to put the two machines in the cluster;
I have CE0 of each of the machines plugged into the network;
I have CE1 and CE2 of each machine connected together via a crossover cable;
According to the documentation "Oracle Solaris Cluster HA for Alliance Access" there are prerequisites (http://docs.oracle.com/cd/E19680-01/html/821-1547/ciajejfa.html) as creating HAstoragePlus , and logical host resource group;
Could anyone give me some tips on how to create this cluster and the prerequisites?
tanks!
Edited by: user13045950 on 05/12/2012 05:04
Edited by: user13045950 on 05/12/2012 05:06

Hi,
a good source of information for the beginner is: http://www.oracle.com/technetwork/articles/servers-storage-admin/how-to-install-two-node-cluster-166763.pdf
To create a highly available logical IP address just do
clrg create <name-for-resource-group>
clrslh create -g <name-for-resource-group> <name-of-ip-address> # This IP address should be available in /etc/hosts on both cluster nodes.
clrg online -M <name-for-resource-group>
Regards
Hartmut

Does solaris cluster 3.3 need to install veritas vxvm software?

hello buddy
I read the document for solaris cluster 3.3 , and see it need to install veritas vxvm.
why need veritas vxvm if I have solaris cluster ?
Thanks

You need to use either Solaris Volume Manager, or Veritas Volume Manager. With clustering you need a disk manager that is cluster aware, iow, it needs to know that one disk can be accessed by more than one server at a time.
Have a look at chapter 3 in the Cluster installation manual for the steps to use Solaris Volume Manager. It's iportant to use the /dev/did disk names
http://www.oracle.com/technetwork/documentation/solaris-cluster-33-192999.html

How to know whether there is any change in a transaction in ic webclient

Hi,
There is one activity screen in the ic web(CRM 5.0). There is two button(Change, Save , Sendnotification) on that screen.
Sendnotification: if i click this button then it will check whether there is any change done using below logic and will send the noti..:
DATA:lv_transaction   TYPE REF TO if_bol_transaction_context,
lv_entity       TYPE REF TO cl_crm_bol_entity.
lv_transaction = lv_btorder->get_transaction( ).
      IF lv_transaction->check_save_needed( ) EQ 'X'.
         then save the changes and send notification
      ENDIF.
Question:
Now i clicked on the Change button and did some changes.Then saved.
Then again i did some changes, now i clicked on the Sendnotification button.It sent an notification.
Now i again clicked on the Sendnotification(this time i didnt do any changes), it sent the same notification again.
So how to know that actully changes done or not & how to write code if there is no changes?
During debugging , i found that the method check_save_needed always returns 'X' as long as i am in the chage mode of that activity. As a result if i dont do any changes also in the activity and click the button , it sends the notification.
please suggest how to restrict using coding........
Thanks
sudhansu

Not solved.

Solaris cluster 3.2 Sparc

Hi folks
First things first. I may not have great knowledge about Solaris clusters, so please be merciful :)
Here it is what I have:
- 2 x Netra T1 AC200 each with 1GB Ram, 2x18GB disks, 500 MHZ Sparc Cpu, 4 port ethernet card
- 1 array netra d130 3x36 GB
-- cable et all, switches , you name it
So, I set up the OS, all ok. I set up the cluster, all SEEMS to be ok.
But when I define my resources and stuff like that all goes fine, except when I try top bring the resource group on line.
On another configuration I teste the shared logical hostname and works fine.
Group Name Resources
Resources: ingresc nodec ingresr
-- Resource Groups --
Group Name Node Name State Suspended
Group: ingresc node2 Unmanaged No
Group: ingresc node1 Unmanaged No
-- Resources --
Resource Name Node Name State Status Message
Resource: nodec node2 Offline Offline
Resource: nodec node1 Offline Offline
Resource: ingresr node2 Offline Offline
Resource: ingresr node1 Offline Offline
scswitch: (C969069) Request failed because resource group ingresc is in ERROR_STOP_FAILED state and requires operator attention
Now, in /var/adm/messsages I spotted this :
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_stop> for resource <nodec>, resource group <IngresNCG>, node <node2>, timeout <300> seconds
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_stop>:tag=<IngresNCG.nodec.1>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
A little bit of research points in the direction of a bug (see CR 6565601)
Here it is what I see as my options:
1 - reinstall Solaris OS, but not the Solaris Cluster 3.2, instead using Solaris Express 10/07 or 2/08. But will this combination work ? Or will it work only in the combination Solaris Cluster Express and Solaris Express Developer Edition ? If the later, which versions will work together ?
2 - Beg for a Solaris Cluster 3.2 patch, although in my humble opinion, this should be free since it looks to me that once you write your own stuff, you run in the bug, and after all it is education
Any ideas, help, greatly appreciated
Many thanks
Armand

Although names are different since I used two setups, this is the relevant part of /var/adm/messages.
It looks to me Ingres resource is failing:
Mar 6 17:08:03 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_prenet_start> for resource <nodec>, resource group <IngresNCG>, node <node2>, timeout <300> seconds
Mar 6 17:08:03 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_prenet_start>:tag=<IngresNCG.nodec.10>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 6 17:08:05 node2 svc.startd[8]: [ID 652011 daemon.warning] svc:/system/cluster/scsymon-srv:default: Method "/usr/cluster/lib/svc/method/svc_scsymon_srv start" failed with exit status 96.
Mar 6 17:08:05 node2 svc.startd[8]: [ID 748625 daemon.error] system/cluster/scsymon-srv:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Mar 6 17:08:09 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_prenet_start> completed successfully for resource <nodec>, resource group <IngresNCG>, node <node2>, time used: 1% of timeout <300 seconds>
Mar 6 17:08:09 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_PRENET_STARTED
Mar 6 17:08:09 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_STARTING
Mar 6 17:08:09 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_start> for resource <nodec>, resource group <IngresNCG>, node <node2>, timeout <500> seconds
Mar 6 17:08:09 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_start>:tag=<IngresNCG.nodec.0>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource nodec status on node node2 change to R_FM_ONLINE
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource nodec status msg on node node2 change to <LogicalHostname online.>
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_start> completed successfully for resource <nodec>, resource group <IngresNCG>, node <node2>, time used: 0% of timeout <500 seconds>
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_JUST_STARTED
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_ONLINE_UNMON
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource IngresNCR state on node node2 change to R_STARTING
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_MON_STARTING
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource IngresNCR status on node node2 change to R_FM_UNKNOWN
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource IngresNCR status msg on node node2 change to <Starting>
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/ingres_server_start> for resource <IngresNCR>, resource group <IngresNCG>, node <node2>, timeout <300> seconds
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_monitor_start> for resource <nodec>, resource group <IngresNCG>, node <node2>, timeout <300> seconds
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</global/disk2s0/ing_nc_1/ingresclu/bin/ingres_server_start>:tag=<IngresNCG.IngresNCR.0>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 6 17:08:11 node2 Cluster.RGM.rgmd: [ID 268902 daemon.notice] 45 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_monitor_start>:tag=<IngresNCG.nodec.7>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 6 17:08:12 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_start> completed successfully for resource <nodec>, resource group <IngresNCG>, node <node2>, time used: 0% of timeout <300 seconds>
Mar 6 17:08:12 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_ONLINE
Mar 6 17:08:13 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource IngresNCR status msg on node node2 change to <Bringing Ingres DBMS server online.>
Mar 6 17:08:30 node2 sendmail[534]: [ID 702911 mail.alert] unable to qualify my own domain name (node2) -- using short name
Mar 6 17:08:30 node2 sendmail[535]: [ID 702911 mail.alert] unable to qualify my own domain name (node2) -- using short name
Mar 6 17:08:31 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource IngresNCR status msg on node node2 change to <Bringing Ingres DBMS server offline.>
Mar 6 17:08:45 node2 SC[Ingres.ingres_server,IngresNCG,IngresNCR,stop]: [ID 147958 daemon.error] ERROR : HA-Ingres failed to stop.
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource IngresNCR status on node node2 change to R_FM_FAULTED
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource IngresNCR status msg on node node2 change to <Ingres DBMS server faulted.>
Mar 6 17:08:46 node2 SC[Ingres.ingres_server,IngresNCG,IngresNCR,start]: [ID 335575 daemon.error] ERROR : Stop method failed for the HA-Ingres data service.
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 938318 daemon.error] Method <bin/ingres_server_start> failed on resource <IngresNCR> in resource group <IngresNCG> [exit code <1>, time used: 11% of timeout <300 seconds>]
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource IngresNCR state on node node2 change to R_START_FAILED
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 529407 daemon.notice] resource group IngresNCG state on node node2 change to RG_PENDING_OFF_START_FAILED
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource IngresNCR state on node node2 change to R_STOPPING
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_MON_STOPPING
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource IngresNCR status on node node2 change to R_FM_UNKNOWN
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource IngresNCR status msg on node node2 change to <Stopping>
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/ingres_server_stop> for resource <IngresNCR>, resource group <IngresNCG>, node <node2>, timeout <300> seconds
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_monitor_stop> for resource <nodec>, resource group <IngresNCG>, node <node2>, timeout <300> seconds
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</global/disk2s0/ing_nc_1/ingresclu/bin/ingres_server_stop>:tag=<IngresNCG.IngresNCR.1>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 6 17:08:46 node2 Cluster.RGM.rgmd: [ID 268902 daemon.notice] 45 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_monitor_stop>:tag=<IngresNCG.nodec.8>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 6 17:08:47 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource IngresNCR status msg on node node2 change to <Bringing Ingres DBMS server offline.>
Mar 6 17:08:48 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_stop> completed successfully for resource <nodec>, resource group <IngresNCG>, node <node2>, time used: 0% of timeout <300 seconds>
Mar 6 17:08:48 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_ONLINE_UNMON
Mar 6 17:09:00 node2 SC[Ingres.ingres_server,IngresNCG,IngresNCR,stop]: [ID 147958 daemon.error] ERROR : HA-Ingres failed to stop.
Mar 6 17:09:02 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource IngresNCR status on node node2 change to R_FM_FAULTED
Mar 6 17:09:02 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource IngresNCR status msg on node node2 change to <Ingres DBMS server faulted.>
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 938318 daemon.error] Method <bin/ingres_server_stop> failed on resource <IngresNCR> in resource group <IngresNCG> [exit code <2>, time used: 5% of timeout <300 seconds>]
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource IngresNCR state on node node2 change to R_STOP_FAILED
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 529407 daemon.notice] resource group IngresNCG state on node node2 change to RG_PENDING_OFF_STOP_FAILED
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 424774 daemon.error] Resource group <IngresNCG> requires operator attention due to STOP failure
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_STOPPING
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource nodec status on node node2 change to R_FM_UNKNOWN
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource nodec status msg on node node2 change to <Stopping>
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_stop> for resource <nodec>, resource group <IngresNCG>, node <node2>, timeout <300> seconds
Mar 6 17:09:03 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_stop>:tag=<IngresNCG.nodec.1>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Mar 6 17:09:04 node2 ip: [ID 678092 kern.notice] TCP_IOC_ABORT_CONN: local = 192.168.005.085:0, remote = 000.000.000.000:0, start = -2, end = 6
Mar 6 17:09:04 node2 ip: [ID 302654 kern.notice] TCP_IOC_ABORT_CONN: aborted 0 connection
Mar 6 17:09:04 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource nodec status on node node2 change to R_FM_OFFLINE
Mar 6 17:09:04 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource nodec status msg on node node2 change to <LogicalHostname offline.>
Mar 6 17:09:04 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_stop> completed successfully for resource <nodec>, resource group <IngresNCG>, node <node2>, time used: 0% of timeout <300 seconds>
Mar 6 17:09:04 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource nodec state on node node2 change to R_OFFLINE
Mar 6 17:09:04 node2 Cluster.RGM.rgmd: [ID 529407 daemon.notice] resource group IngresNCG state on node node2 change to RG_ERROR_STOP_FAILED
Mar 6 17:09:04 node2 Cluster.RGM.rgmd: [ID 424774 daemon.error] Resource group <IngresNCG> requires operator attention due to STOP failure
Mar 6 17:09:04 node2 Cluster.RGM.rgmd: [ID 663692 daemon.error] failback attempt failed on resource group <IngresNCG> with error <resource group in ERROR_STOP_FAILED state requires operator attention>
Mar 6 17:09:10 node2 java[1652]: [ID 807473 user.error] pkcs11_softtoken: Keystore version failure.Thank you
Armand

Solaris Cluster 4.1 Quorum Configuration Best Follows metaset OR ZFS?

Solaris Cluster 4.1 Quorum Configuration Best Follows metaset OR ZFS?

If you want to use a quorum device - in contrast to a quorum server - then you'll need a LUN to configure your quorum device on.
It does not matter whether this LUN will be used later as a zpool or as an SVM metaset.
There is one exception, that should be mentioned in the docs. If the LUN used for the quorum device is later used as a disk for a zpool, and this disk gets a new EFI label, then, I think, the quorum information can get overwritten. So be careful in this specific situation and consult the docs before doing so.
Hartmut

Grid installation: root.sh failed on the first node on Solaris cluster 4.1

Hi all,
I'm trying to install the Grid (11.2.0.3.0) on the 2 node-clusters (OSC 4.1).
When I run the root.sh on the first node, I got the out put as follow:
xha239080-root-5.11# root.sh
Performing root user operation for Oracle 11g
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /Grid/CRShome
Enter the full pathname of the local bin directory: [/usr/local/bin]:
/usr/local/bin is read only. Continue without copy (y/n) or retry (r)? [y]:
Warning: /usr/local/bin is read only. No files will be copied.
Creating /var/opt/oracle/oratab file...
Entries will be added to the /var/opt/oracle/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /Grid/CRShome/crs/install/crsconfig_params
Creating trace directory
User ignored Prerequisites during installation
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding Clusterware entries to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'xha239080'
CRS-2676: Start of 'ora.mdnsd' on 'xha239080' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'xha239080'
CRS-2676: Start of 'ora.gpnpd' on 'xha239080' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'xha239080'
CRS-2672: Attempting to start 'ora.gipcd' on 'xha239080'
CRS-2676: Start of 'ora.cssdmonitor' on 'xha239080' succeeded
CRS-2676: Start of 'ora.gipcd' on 'xha239080' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'xha239080'
CRS-2672: Attempting to start 'ora.diskmon' on 'xha239080'
CRS-2676: Start of 'ora.diskmon' on 'xha239080' succeeded
CRS-2676: Start of 'ora.cssd' on 'xha239080' succeeded
ASM created and started successfully.
Disk Group DATA created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk 9cdb938773bc4f16bf332edac499fd06.
Successful addition of voting disk 842907db11f74f59bf65247138d6e8f5.
Successful addition of voting disk 748852d2a5c84f72bfcd50d60f65654d.
Successfully replaced voting disk group with +DATA.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE 9cdb938773bc4f16bf332edac499fd06 (/dev/did/rdsk/d10s6) [DATA]
2. ONLINE 842907db11f74f59bf65247138d6e8f5 (/dev/did/rdsk/d8s6) [DATA]
3. ONLINE 748852d2a5c84f72bfcd50d60f65654d (/dev/did/rdsk/d9s6) [DATA]
Located 3 voting disk(s).
Start of resource "ora.cssd" failed
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'xha239080'
CRS-2672: Attempting to start 'ora.gipcd' on 'xha239080'
CRS-2676: Start of 'ora.cssdmonitor' on 'xha239080' succeeded
CRS-2676: Start of 'ora.gipcd' on 'xha239080' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'xha239080'
CRS-2672: Attempting to start 'ora.diskmon' on 'xha239080'
CRS-2676: Start of 'ora.diskmon' on 'xha239080' succeeded
CRS-2674: Start of 'ora.cssd' on 'xha239080' failed
CRS-2679: Attempting to clean 'ora.cssd' on 'xha239080'
CRS-2681: Clean of 'ora.cssd' on 'xha239080' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'xha239080'
CRS-2677: Stop of 'ora.gipcd' on 'xha239080' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'xha239080'
CRS-2677: Stop of 'ora.cssdmonitor' on 'xha239080' succeeded
CRS-5804: Communication error with agent process
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Grid Infrastructure stack
Failed to start Cluster Synchorinisation Service in clustered mode at /Grid/CRShome/crs/install/crsconfig_lib.pm line 1211.
/Grid/CRShome/perl/bin/perl -I/Grid/CRShome/perl/lib -I/Grid/CRShome/crs/install /Grid/CRShome/crs/install/rootcrs.pl execution failed
xha239080-root-5.11# history
checking the ocssd.log, I see some thing as follow:
2013-09-16 18:46:24.238: [    CSSD][1]clssscmain: Starting CSS daemon, version 11.2.0.3.0, in (clustered) mode with uniqueness value 1379371584
2013-09-16 18:46:24.239: [    CSSD][1]clssscmain: Environment is production
2013-09-16 18:46:24.239: [    CSSD][1]clssscmain: Core file size limit extended
2013-09-16 18:46:24.248: [    CSSD][1]clssscmain: GIPCHA down 1
2013-09-16 18:46:24.249: [    CSSD][1]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2013-09-16 18:46:24.250: [    CSSD][1]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2013-09-16 18:46:24.250: [    CSSD][1]clssscExtendLimits: The current soft limit for locked memory is 4294967293, hard limit is 4294967293
2013-09-16 18:46:24.250: [    CSSD][1]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2013-09-16 18:46:24.250: [    CSSD][1]clssscSetPrivEnv: Setting priority to 4
2013-09-16 18:46:24.253: [    CSSD][1]clssscSetPrivEnv: unable to set priority to 4
2013-09-16 18:46:24.253: [    CSSD][1]SLOS: cat=-2, opn=scls_mem_lockdown, dep=11, loc=mlockall
unable to lock memory
2013-09-16 18:46:24.253: [    CSSD][1](:CSSSC00011:)clssscExit: A fatal error occurred during initialization
Do anyone have any idea what going on and how can I fix it ?

Hi,
solaris has several issues with DISM, e.g.:
Solaris 10 and Solaris 11 Shared Memory Locking May Fail (Doc ID 1590151.1)
Sounds like Solaris Cluster has a similar bug. A "workaround" is to reboot the (cluster) zone, that "fixes" the mlock error. This bug was introduced with updates in september, atleast to our environment (Solaris 11.1). Prior i did not have the issue and now i have to restart the entire zone, whenever i stop crs.
With 11.2.0.3 the root.sh script can be rerun without prior cleaning up, so you should be able to continue installation at that point after the reboot. After the root.sh completes some configuration assistants need to be run, to complete the installation. You need to execute this manually as you wipe your oui session
Kind Regards
Thomas

HOWTO: Create 2-node Solaris Cluster 4.1/Solaris 11.1(x64) using VirtualBox

I did this on VirtualBox 4.1 on Windows 7 and VirtualBox 4.2 on Linux.X64. Basic pre-requisites are : 40GB disk space, 8GB RAM, 64-bit guest capable VirtualBox.
Please read all the descriptive messages/prompts shown by 'scinstall' and 'clsetup' before answering.
0) Download from OTN
- Solaris 11.1 Live Media for x86(~966 MB)
- Complete Solaris 11.1 IPS Repository Image (total 7GB)
- Oracle Solaris Cluster 4.1 IPS Repository image (~73MB)
1) Run VirtualBox Console, create VM1 : 3GB RAM, 30GB HDD
2) The new VM1 has 1 NIC, add 2 more NICs (total 3). Setting the NIC to any type should be okay, 'VirtualBox Host Only Adapter' worked fine for me.
3) Start VM1, point the "Select start-up disk" to the Solaris 11.1 Live Media ISO.
4) Select "Oracle Solaris 11.1" in the GRUB menu. Select Keyboard layout and Language.
VM1 will boot and the Solaris 11.1 Live Desktop screen will appear.
5) Click <Install Oracle Solaris> from the desktop, supply necessary inputs.
Default Disk Discovery (iSCSI not needed) and Disk Selection are fine.
Disable the "Support Registration" connection info
6) The alternate user created during the install has root privileges (sudo). Set appropriate VM1 name
7) When the VM has to be rebooted after the installation is complete, make sure the Solaris 11.1 Live ISO is ejected or else the VM will again boot from the Live CD.
8) Repeat steps 1-6, create VM2 and install Solaris.
9) FTP(secure) the Solaris 11.1 Repository IPS and Solaris Cluster 4.1 IPS onto both the VMs e.g under /home/user1/
10) We need to setup both the packages: Solaris 11.1 Repository and Solaris Cluster 4.1
11) All commands now to be run as root
12) By default the 'solaris' repository is of type online (pkg.oracle.com), that needs to be updated to the local ISO we downloaded :-
+$ sudo sh+
+# lofiadm -a /home/user1/sol-11_1-repo-full.iso+
+//output : /dev/lofi/N+
+# mount -F hsfs /dev/lofi/N /mnt+
+# pkg set-publisher -G '*' -M '*' -g /mnt/repo solaris+
13) Setup the ha-cluster package :-
+# lofiadm -a /home/user1/osc-4_1-ga-repo-full.iso+
+//output : /dev/lofi/N+
+# mkdir /mnt2+
+# mount -f hsfs /dev/lofi/N /mnt2+
+# pkg set-publisher -g file:///mnt2/repo ha-cluster+
14) Verify both packages are fine :-
+# pkg publisher+
PUBLISHER                   TYPE     STATUS P LOCATION
solaris                     origin   online F file:///mnt/repo/
ha-cluster                  origin   online F file:///mnt2/repo/
15) Install the complete SC4.1 package by installing 'ha-cluster-full'
+# pkg install ha-cluster-full+
14) Repeat steps 12-15 on VM2.
15) Now both VMs have the OS and SC4.1 installed.
16) By default the 3 NICs are in the "Automatic" profile and have DHCP configured. We need to activate the Fixed profile and put the 3 NICs into it. Only 1 interface, the public interface, needs to be
configured. The other 2 are for the cluster interconnect and will be automatically configured by scinstall. Execute the following commands :-
+# netadm enable -p ncp defaultfixed+
+//verify+
+# netadm list -p ncp defaultfixed+
+#Configure the public-interface+
+#Verify none of the interfaces are listed, add all the 3+
+# ipadm show-if+
+# run dladm show-phys or dladm show-link to check interface names : must be net0/net1/net2+
+# ipadm create-ip net0+
+# ipadm create-ip net1+
+# ipadm create-ip net2+
+# ipadm show-if+
+//select proper IP and configure the public interface. I have used 192.168.56.171 & 172+
+# ipadm create-addr -T static -a 192.168.56.171/24 net0/publicip+
+#IP plumbed, restart+
+# ipadm down-addr -t net0/publicip+
+# ipadm up-addr -t net0/publicip+
+//Verify publicip is fine by pinging the host+
+# ping 192.168.56.1+
+//Verify, net0 should be up, net1/net2 should be down+
+# ipadm+
17) Repeat step 16 on VM2
18) Verify both VMs can ping each other using the public IP. Add entries to each other's /etc/hosts
Now we are ready to run scinstall and create/configure the 2-node cluster
19)
+# cd /usr/cluster/bin+
+# ./scinstall+
select 1) Create a new cluster ...
select 1) Create a new cluster
select 2) Custom in "Typical or Custom Mode"
Enter cluster name : mycluster1 (e.g)
Add the 2 nodes : solvm1 & solvm2 and press <ctrl-d>
Accept default "No" for <Do you need to use DES authentication>"
Accept default "Yes" for <Should this cluster use at least two private networks>
Enter "No" for <Does this two-node cluster use switches>
Select "1)net1" for "Select the first cluster transport adapter"
If there is warning of unexpected traffic on "net"1, ignore it
Enter "net1" when it asks corresponding adapter on "solvm2"
Select "2)net2" for "Select the second cluster transport adapter"
Enter "net2" when it asks corresponding adapter on "solvm2"
Select "Yes" for "Is it okay to accept the default network address"
Select "Yes" for "Is it okay to accept the default network netmask"Now the IP addresses 172.16.0.0 will be plumbed in the 2 private interfaces
Select "yes" for "Do you want to turn off global fencing"
(These are SATA serial disks, so no fencing)
Enter "Yes" for "Do you want to disable automatic quorum device selection"
(we will add quorum disks later)
Enter "Yes" for "Proceed with cluster creation"
Select "No" for "Interrupt cluster creation for cluster check errors"
The second node will be configured and 2nd node rebooted
The first node will be configured and rebootedAfter both nodes have rebooted, verify the cluster has been created and both nodes joined.
On both nodes :-
+# cd /usr/cluster/bin+
+# ./clnode status+
+//should show both nodes Online.+
At this point there are no quorum disks, so 1 of the node's will be designated quorum vote. That node VM has to be up for the other node to come up and cluster to be formed.
To check the current quorum status, run :-
+# ./clquorum show+
+//one of the nodes will have 1 vote and other 0(zero).+
20)
Now the cluster is in 'Installation Mode' and we need to add a quorum disk.
Shutdown both the nodes as we will be adding shared disks to both of them
21)
Create 2 VirtualBox HDDs (VDI Files) on the host, 1 for quorum and 1 for shared filesystem. I have used a size of 1 GB for each :-
*$ vboxmanage createhd --filename /scratch/myimages/sc41cluster/sdisk1.vdi --size 1024 --format VDI --variant Fixed*
*0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%*
*Disk image created. UUID: 899147b9-d21f-4495-ad55-f9cf1ae46cc3*
*$ vboxmanage createhd --filename /scratch/myimages/sc41cluster/sdisk2.vdi --size 1024 --format VDI --variant Fixed*
*0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%*
*Disk image created. UUID: 899147b9-d22f-4495-ad55-f9cf15346caf*
22)
Attach these disks to both the VMs as shared type
*$ vboxmanage storageattach solvm1 --storagectl "SATA" --port 1 --device 0 --type hdd --medium /scratch/myimages/sc41cluster/sdisk1.vdi --mtype shareable*
*$ vboxmanage storageattach solvm1 --storagectl "SATA" --port 2 --device 0 --type hdd --medium /scratch/myimages/sc41cluster/sdisk2.vdi --mtype shareable*
*$ vboxmanage storageattach solvm2 --storagectl "SATA" --port 1 --device 0 --type hdd --medium /scratch/myimages/sc41cluster/sdisk1.vdi --mtype shareable*
*$ vboxmanage storageattach solvm2 --storagectl "SATA" --port 2 --device 0 --type hdd --medium /scratch/myimages/sc41cluster/sdisk2.vdi --mtype shareable*
The disks are attached to SATA ports 1 & 2 of each VM. On my VirtualBox on Linux, the controller type is "SATA", whereas on Windows it is "SATA Controller".
The "--mtype shareable' parameter is important
23)
Mark both disks as shared :-
*$ vboxmanage modifyhd /scratch/myimages/sc41cluster/sdisk1.vdi --type shareable*
*$ vboxmanage modifyhd /scratch/myimages/sc41cluster/sdisk2.vdi --type shareable*
24) Start both VMs. We need to format the 2 shared disks
25) From VM1, run format. In my case, the 2 new shared disks show up as 'c7t1d0' and 'c7t2d0'.
+# format+
select disk 1 (c7t1d0)
[disk formated]
FORMAT MENU
fdisk
Type 'y' to accept default partition
partition
0
<enter>
<enter>
1
995mb
print
label
<yes>
quit
quit26) Repeat step 25) for the 2nd disk (c7t2d0)
27) Make sure the shared disks can be used for quorum :-
On VM1
+# ./cldevice refresh+
+# ./cldevice show+
On VM2
+# ./cldevice refresh+
+# ./cldevice show+
The shared disks should have the same DID (d2,d3,d4 etc). Note down the DID that you are going to use for quorum (e.g d2)
By default, global fencing is enabled for these disks. We need to turn it off for all disks as these are SATA disks :-
+# cldevice set -p default_fencing=nofencing-noscrub d1+
+# cldevice set -p default_fencing=nofencing-noscrub d2+
+# cldevice set -p default_fencing=nofencing-noscrub d3+
+# cldevice set -p default_fencing=nofencing-noscrub d4+
28) It is better to do one more reboot of both VMs, otherwise I got a error when adding the quorum disk
29) Run clsetup to add quorum disk and to complete cluster configuration :-
+# ./clsetup+
=== Initial Cluster Setup ===
Enter 'Yes' for "Do you want to continue"
Enter 'Yes' for "Do you want add any quorum devices"
Select '1) Directly Attached Shared Disk' for the type of device
Enter 'Yes' for "Is it okay to continue"
Enter 'd2' (or 'd3') for 'Which global device do you want to use'
Enter 'Yes' for "Is it okay to proceed with the update"
The command 'clquorum add d2' is run
Enter 'No' for "Do you want to add another quorum device"
Enter 'Yes' for "Is it okay to reset "installmode"?"Cluster initialization is complete.!!!
30) Run 'clquorum status' to confirm both nodes and the quorum disk have 1 vote each
31) Run other cluster commands to explore!
I will cover Data services and shared file system in another post. Basically the other shared disk
can be used to create a UFS filesystem and mount it on all nodes.

The Solaris Cluster 4.1 Installation and Concepts Guide are available at :-
http://docs.oracle.com/cd/E29086_01/index.html
Thanks.

Common Agent Container Problem on New Solaris Cluster 3.2 (1/09)

Hi,
I have just installed Solaris Cluster 3.2 u2. Getting following error when run cluster check or sccheck -v 2:
cluster check
cacaocsc: unable to connect: Connection refused by peer
cluster check: (C704199) unable to reach Common Agent Container
sccheck -v 2
sccheck: Requesting explorer data and node report from node1.
sccheck: Requesting explorer data and node report from node1-cl.
sccheck: node1: Additional explorer arguments: -w !default,cluster,disks,etc,messages,nbu,netinfo,patch,pkg,sds,lvm,sonoma,sysconfig,var,vxvm,vxfs,vxfsextended -c "/usr/cluster/lib/sccheck/vfstab-global-mount-points" -c "/usr/cluster/lib/sccheck/netapp-nas-quorum-devices"
sccheck: node1: WARNING: EXP_CONTRACT_ID not set!
sccheck: node1: WARNING: EXP_REPLY not set!
sccheck: node1:
sccheck: node1: 2 warnings found in /etc/opt/SUNWexplo/default/explorer
sccheck: node1:
sccheck: node1: Mar 07 21:56:15 node1[5519] explorer: ERROR explorer
sccheck: node1: Mar 07 21:56:15 node1[5519] explorer: ERROR Module or alias sds does not exist.
sccheck: node1: Explorer run failed:
sccheck: node1-cl: Additional explorer arguments: -w !default,cluster,disks,etc,messages,nbu,netinfo,patch,pkg,sds,lvm,sonoma,sysconfig,var,vxvm,vxfs,vxfsextended -c "/usr/cluster/lib/sccheck/vfstab-global-mount-points" -c "/usr/cluster/lib/sccheck/netapp-nas-quorum-devices"
sccheck: node1-cl: WARNING: EXP_CONTRACT_ID not set!
sccheck: node1-cl: WARNING: EXP_REPLY not set!
sccheck: node1-cl:
sccheck: node1-cl: 2 warnings found in /etc/opt/SUNWexplo/default/explorer
sccheck: node1-cl:
sccheck: node1-cl: Mar 07 21:56:15 node1-cl[3851] explorer: ERROR explorer
sccheck: node1-cl: Mar 07 21:56:15 node1-cl[3851] explorer: ERROR Module or alias sds does not exist.
sccheck: node1-cl: Explorer run failed:
sccheck: node1 error: Unexpected early return from server.
sccheck: node1-cl error: Unexpected early return from server.
sccheck: Unable to run checks on: node1,node1-cl
Even when I try to run Cluster Manager from web I am getting following error:
"A communication problem was encountered by the system"
Following is the version I am using:
root@node1 #
root@node1 # cacaoadm -V
2.2.0.1
root@node1 #
root@node1 # smcwebserver -V
Version 3.1
root@node1 #
root@node1 #
root@node1 # svcs -a | grep container
online 21:30:30 svc:/application/management/common-agent-container-1:default
root@node1 #
root@node1 #
root@node1 # svcs -a | grep webconsole
online 21:20:29 svc:/system/webconsole:console
root@node1 #
root@node1 #
root@node1 #
root@node1 # cat /etc/release
Solaris 10 5/08 s10s_u5wos_10 SPARC
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 24 March 2008
root@node1 #
root@node1 #
root@node1 # cat /etc/cluster/release
Sun Cluster 3.2u2 for Solaris 10 sparc
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
root@node1 #
root@node1 #
Do you have any idea or tips to solve this problem?
Thanks
Edited by: shmozumder on Mar 8, 2009 1:50 AM

Hi Tim,
Yes - it's running:
default instance is ENABLED at system startup.
Smf monitoring process:
29410
29411
Uptime: 0 day(s), 0:14
dssdbgen03p1 # svcs -a |grep -i comm
disabled 17:03:06 svc:/network/rpc/mdcomm:default
online 13:20:53 svc:/application/management/common-agent-container-2:default
uninitialized 16:58:32 svc:/application/management/common-agent-container-1:default
I also get messages like the following in the /var/adm/messages file when starting cacaoadm :
Jul 7 13:20:52 dssdbgen03p1 java.lang.ClassNotFoundException: Cannot find class com.sun.cacao.rmi.impl.RMIModule in module com.sun.cacao.rmi
Jul 7 13:20:52 dssdbgen03p1 java.lang.ClassNotFoundException: Cannot find class com.sun.cacao.invoker.impl.InvokerModule in module com.sun.cacao.invoker
Jul 7 13:20:52 dssdbgen03p1 java.lang.ClassNotFoundException: Cannot find class com.sun.cacao.snmpv3adaptor.SnmpV3AdaptorModule in module com.sun.cacao.snmpv3_adaptor
Jul 7 13:20:52 dssdbgen03p1 java.lang.ClassNotFoundException: Cannot find class com.sun.cacao.dtrace.impl.DTraceModule in module com.sun.cacao.dtrace
Jul 7 13:20:52 dssdbgen03p1 java.lang.ClassNotFoundException: Cannot find class com.sun.cacao.rbac.impl.RbacModule in module com.sun.cacao.rbac
Jul 7 13:20:52 dssdbgen03p1 java.lang.ClassNotFoundException: Cannot find class com.sun.cacao.instrum.impl.InstrumModule in module com.sun.cacao.instrum
Jul 7 13:20:52 dssdbgen03p1 java.lang.ClassNotFoundException: Cannot find class com.sun.cacao.commandstream.CommandStreamAdaptorModule in module com.sun.cacao.command_stream_adaptor

Oracle ASM Configuration on Solaris Cluster - Oracle 11.2.0.3

Hi,
I want some clarifications!
I need to set Active and Passive Cluster settup on Solaris 10 SPARC Operating System, the HA software is Solaris Cluster and Oracle 11.2.0.3.
1) I understand "Single instance Oracle ASM is not supported with Oracle 11g release 2" so we need to go for Clustered ASM - is it required to use RAC framework in this case?
2) When i use the RAC framework, do i need to have license for RAC?
Am new to Oracle, any help is appreciated.
Regards,
Shashank

Hi,
I want some clarifications!
I need to set Active and Passive Cluster settup on Solaris 10 SPARC Operating System, the HA software is Solaris Cluster and Oracle 11.2.0.3.
1) I understand "Single instance Oracle ASM is not supported with Oracle 11g release 2" so we need to go for Clustered ASM - is it required to use RAC framework in this case?
2) When i use the RAC framework, do i need to have license for RAC?
Am new to Oracle, any help is appreciated.
Regards,
Shashank

Is Solaris Cluster 4.0 Free?. whether we need any license for using it?

Similar Messages

Maybe you are looking for