Is SPA8800 working without PSTN lines when integrated with BE3000 ?

Hi Guys,
I have a SPA8800 configured with static ip address 192.168.1.2/24 and BE3000 with ip address 192.168.1.250 in the same network. I would like to connect a fax machine to SPA8800's fxs port however there are no PSTN lines connected to FXO ports , will this fax machine work?
All the technical documents for spa8800 i can find online only tell you how to integrate SPA8800 with BE3000 with PSTN lines. thus, the connection type between BE3K and SPA8800 is "FXO". what if there are no PSTN lines available ? can the fax machine send or receive faxes via ISDN E1/T1 service on BE3K ?
if the answer is yes, where are the configuration document links ?

You can connect FAX machine to the FXS port of the SPA8800. There is no mandatory requirement to have FXO lines also connected to SPA8800. If you want to use E1-PRI line as PSTN connection for fax calls, that is fine as well.
One caveat is that fax-passthrough on E1 is supported.
Will review the admin guide to see if it requires update.
Thanks

Similar Messages

Working with Outlook 2011 for Mac, my mails are slow and I can work only on-line, when off-line, mail cannot be opened because it is only partially downloaded. How to solve??

working with Outlook 2011 for Mac, my mails are slow and I can work only on-line, when off-line, mail cannot be opened because it is only partially downloaded. How to solve??

Try http://www.microsoft.com/mac/support.

HT4519 how do i get my server email to send pictures. Email works without pictures, but when attaching a picture the mail will not send

Email works without pictures, but when attaching a picture the mail will not send

Hi,
In Mail > Preferences > Accounts to can find out which STMP server you are using for outgoing items.
This can be one account.
I do this with a dial Up account I still have access to.
I can "fetch" mail over DSL and now Fibre.
However I have to be Logged in via Dial up to actually use their Servers to Send.
As a Consequence I "send" via one of the other Accounts STMP servers. (I tend to add a signature that reflects this account change)
The other thing that might explain what you are seeing is the Full Name Box.
8:38 PM Monday; April 8, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Hi, I am having trouble using the smooth tool on a logo that I created. I have watched tutorials and something isn't working for me. When trace with the smooth the line just disappears and doesn't smooth anything out. Please help.

Hi, I am having trouble using the smooth tool on a logo that I created. I have watched tutorials and something isn't working for me. When trace with the smooth the line just disappears and doesn't smooth anything out. Please help.

Sorry, that's Monika with a k
On Tue, Nov 18, 2014 at 2:26 PM, Monika Gause <[email protected]>

Jittery lines when drawing with pencil tool in Flash

When drawing with the pencil tool using an Intuos Wacom tablet, the lines are jagged and create several points along the jagged line, making the pencil tool unusable. Does not occur with any other program. Using Flash CC Pro 2014.

Hi Jessy,
Can you please provide the following details to understand the issue .
What is mode of pencil you have set to draw like straihgten ,Smooth or Ink ,and if it smooth mode what is the smothing value you have set .
Wacom driver version.
do you see this problem in any previous version of Flash.
Thanks!
Latha

JSF output truncated when integrating with OpenCms

Hi all!
I'm quite new to JSF and am trying to integrate it with OpenCms, a JSP based content management system. In OpenCms all files reside in a virtual filesystem (VFS) and are accessed through the opencms-servlet which is mapped to "/opencms/*".
While trying to integrate JSF with OpenCms I added another prefix servlet mapping for the faces servlet: "/faces/*". When I now try to access a JSF-page I have to use a URL like this:
http://myserver:8080/mywebapp/faces/opencms/page1.jsp
For my understanding the faces servlet now tries to read a file /opencms/page1.jsp from the real filesystem, which does not exist. Is this correct? How could I get faces-servlet to obtain page1.jsp from the VFS? However, I do not get an exception or a message telling me that the resource page1.jsp is missing.
Instead the faces-servlet seems to do it's work and forwards to the opencms-servlet which in turn forwards to the JSP-servlet and processes the JSP. I'm sure the whole JSP is processed as I added log-statements from the beginning to the end, of which all are executed. However, the output of the JSP is truncated whenever there exists at least one JSF tag in the page.
Any ideas what's going wrong here?
Is my understanding of the executing order correct?
many thanks in advance for your help,
- martin

Hi!
Working with JSF 1.1 works, but now I want to switch to JSF 1.2, which does not work :-(
I have a simple demo application (webapp 2.4 and webapp 2.5) without OpenCms which works. OpenCms 7.0.2 without JSF works as a 2.4 and as a 2.5 webapp. As soon as I want to access a JSF-page with an URL like http://localhost:8080/opencms-7.0.24/faces/opencms/mypage.jsp I get only truncated output like the following:
<form id="j_id_jsp_2033902881_1" name="j_id_
{code}
Any Ideas what could cause the truncation?
There are now log messages and no exceptions in any logfile :-(
tia,
- martin

Throws exception while saving SCREEN DATA when integrated with CRMOD & OPA

I have integrated CRMOD with OPA and able to see my screens and enter data and review after submitting screen data, but when I click "Save" on TOP right of the Applet Test page throws below exception. Please help
===================================================================
0 [Thread-2] INFO com.oracle.util.plugins.PluginRegistry - Successfully created plugin factory: com.oracle.determinations.web.crmod.plugins.CrmodAdapter
21 [Thread-2] INFO com.oracle.util.plugins.PluginRegistry - Successfully created plugin factory: com.oracle.determinations.web.crmod.plugins.CrmodAdapter
91903 [http-8080-1] INFO com.oracle.determinations.web.crmod.config.ConnectorProperties - Config File path : configuration/crmod-data-adapter.properties
91934 [http-8080-1] INFO com.oracle.determinations.web.crmod.plugins.CrmodAdapter - Found mapping file ScreeningInterview-mapping.xml.
92045 [http-8080-1] INFO com.oracle.util.plugins.PluginRegistry - Successfully created instance of plugin: com.oracle.determinations.web.crmod.plugins.CrmodAdapter
92045 [http-8080-1] INFO com.oracle.determinations.interview.engine.local.LocalInterviewSession - Data adaptor plugin ( class com.oracle.determinations.web.crmod.plugins.CrmodAdapter ) found - attaching to session.
92045 [http-8080-1] INFO com.oracle.determinations.interview.engine.local.LocalInterviewSession - No Commentary plugin supplied - using default
92049 [http-8080-1] INFO com.oracle.determinations.interview.engine.local.LocalInterviewSession - No List provider supplied - using default
92051 [http-8080-1] INFO com.oracle.determinations.interview.engine.local.LocalInterviewSession - No DocGen plugin supplied - using default
175526 [http-8080-1] ERROR com.oracle.determinations.web.platform.servlet.WebDeterminationsServletUtility - com.oracle.determinations.interview.engine.exceptions.DataAdaptorException: CRMOD-OPA ERR [Missing or unparsable CaseId.]
com.oracle.determinations.interview.engine.exceptions.DataAdaptorException: CRMOD-OPA ERR [Missing or unparsable CaseId.]
     at com.oracle.determinations.web.crmod.plugins.CrmodAdapter.save(CrmodAdapter.java:95)
     at com.oracle.determinations.web.platform.controller.actions.SaveAction.doSave(SaveAction.java:133)
     at com.oracle.determinations.web.platform.controller.actions.SaveAction.getResource(SaveAction.java:61)
     at com.oracle.determinations.web.platform.servlet.WebDeterminationsServlet.doGet(WebDeterminationsServlet.java:80)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at com.oracle.determinations.web.platform.util.CharsetFilter.doFilter(CharsetFilter.java:46)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298)
     at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:861)
     at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:579)
     at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1584)
     at java.lang.Thread.run(Unknown Source)
========== MY ADAPTER PROPERTIES FILE : crmod-data-adapter.properties HAS BELOW DATA ============
## REQUIRED SETTINGS
## Properties for CRMOD Web Services
web-service-url                         =https://secure-ausomxapa.crmondemand.com/Services/Integration
## Supports WS1.0 and WS2.0
web-service-version                    =1.0
## Properties for Authentication
## Username and password must be encrypted using configuration-encrypter tool provided by the product.
## Please refer to Configuring CRM On Demand Connector for Web Determinations of Developer Help for more details.
username                              =Y3JtaXQtZGVtby9jcm1pdA==
password                              =T25EZW1hbmQ=
## OPTIONAL SETTINGS
## Set fixed-authentication to false if you want to implement other forms of authentication
fixed-authentication                =false
## Properties for the mapping file
mapping.load.from.rulebase           =true
## Set the mapping path if load from rulebase is set to false e.g. /configuration/mapping
mapping.location.path               =/configuration/mapping
========= MY Custom Web APPLET URL in CRMOD HAS BELOW ===============
http://localhost:8080/crmod-web-determinations?caseID=new

On Save click getting below error from CRMOD:
9816032 [http-8080-1] ERROR com.oracle.determinations.web.platform.servlet.WebDeterminationsServletUtility - com.oracle.determinations.interview.engine.exceptions.DataAdaptorException: CRMOD-OPA ERR [SOAP Response Parser: CRM On Demand errors found in the SOAP request for saving.
Internal Error: Session is not available. Aborting.]
com.oracle.determinations.interview.engine.exceptions.DataAdaptorException: CRMOD-OPA ERR [SOAP Response Parser: CRM On Demand errors found in the SOAP request for saving.
Internal Error: Session is not available. Aborting.]
=============
Phil Whitwell | Director Product Strategy Advised as to check SOAP Request using TCPMon. Then I followed the below steps:
Step 1) changed URL entry in crmod-data-adapter.properties file
## Properties for CRMOD Web Services
web-service-url =http://localhost:5049/Services/Integration
# earlier entry
#web-service-url =https://secure-ausomxapa.crmondemand.com/Services/Integration
Step 2) Restarted TOMCAT6
Step 3) Started TCPMon after setting tcpmon port as below
[My Tomcat is listening on 8080, I cannot bind tcpmon to listen there as well. the way to use tcpmon correctly is to set the target port to 8080 and set the listen port to some currently unused port (say 5049) and Setup My client – CRMOD As mentioned in Step 1]
Step 4) I got below SOAP Request XML after executing “SAVE” in CRMOD .
Below SOAP Request XML sent on “SAVE” option from CRMOD:
- <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns="urn:crmondemand/ws/account/10/2004" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Header />
- <SOAP-ENV:Body>
- <ns:AccountWS_AccountInsert_Input>
- <ListOfAccount>
- <Account>
<Location>UK</Location>
<AccountName>Phil</AccountName>
<Industry>BFSI</Industry>
</Account>
</ListOfAccount>
</ns:AccountWS_AccountInsert_Input>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
=======================================================
What is incorrect in the above SOAPRequest.xml, why CRMOD is throwing an error on "SAVE",
Can someone please advice?

Work flow in error when executed with a user decision.

Hi,
I am executing a workflow for notification of absence. It has a user decision step to Revise the request or to withdraw it when the absence request is rejected by the approver. When I am executing this the workflow is going into error state. User decision step is not starting at all. The first two steps create notification of absence and check notification are getting completed successfully.
Please let me know where I am going wrong.
Thanks & Regards,
Soumya.

Hi,
I believe the orginal poster is following the workflow tutorial in the sap help.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/fb/135962457311d189440000e829fbbd/frameset.htm
I'm following the instructions and pretty sure it's been followed exactly on each step but am hitting the same issue - see 'Unit 10 - third step'.
The log is reporting two errors
Work item 000000014093: Object FLOWITEM method EXECUTE cannot be executed
and
Error when processing node '0000000039' (ParForEach index 000000)
You reject the notification and then the work flow errors.
Can anyone help?

Implementing Security For ADF Pages when integrated with Oracle APPS

Hi,
Can anyone please let me know the solution to the below problem ?
I have an ADF application that is deployed on a weblogic server. An URL is generated to access the ADF Pages.
I have created one more simple jsp (Launch.jsp) which redirects to this URL on page load.
I am using Oracle APPS where:
->I registered a form function referring to Launch.jsp
->I am referring form function in a responsibility , attaching that to a menu
->When the valid oracle user logs in, I am sending all oracle apps environment variables (User id , Responsibility id, application id ) for that session
What my issue is :
->The URL along with the parameters that I am sending from the Launch.jsp to the ADF Page is visible to the user. So, even if the Oracle APPS user has not logged in, anybody who knows the URL can access the ADF Pages.
->So, Is there any way to implement the security so as, even if anyone knows the URL of the ADF Page cannot access the ADF Pages without the valid user being logged-in through the Oracle APPS.
I am using Jdeveloper 11g.
Please let me know if you need anymore details.
Thanks in advance,
Kavitha

Please help me out if anyone has a solution to this problem.
Thanks,
Kavitha

Network adaters -BlackBerry Device not working in windows 8 when coinnected with usb cable

I was unable to find my plabook in the network or any mounted volume when I connect w8x64 pro to the playbook via usb cable despite the blackberry device manager is loaded on connection
in devce mgmt I found
Device Type: Network Adapters
Manufacturer: Research In Motion
location: 0000.001d.0007.005.000.000.000.000.000
Device Status:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
------------------- Events Tab--------::
Driver Management concluded the process to install driver rimpb_rndis.inf_amd64_c255bed1a35b762a\rimpb_rndis.inf for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0x0.
Driver Management has concluded the process to add Service usb_rndisx for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0.
Driver Management concluded the process to install driver rimpb_rndis.inf_amd64_e3f4ab2c803293ee\rimpb_rndis.inf for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0x0.
Driver Management has concluded the process to add Service usb_rndisx for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0.
Driver version: 2.0.0.32
Itried to update the device but it's up to date
what Can I do?

hi Suman Shrestha,
Welcome to the Lenovo Forums.
Your issue might be similar to this thread.
Although this is for a Windows 7 machine, can you try the solution that was posted and see if the problem gets fixed.
Let me know your findings
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

EP5-work experience and Educational Qualifications integration with e Recru

Hi
The work experience and Educational Qualifications are already maintained for an employee at the ECC level. Does the EP5 system display this data for the same person as internal candidate?
Thanks in advance

Hi,
work experience - no
qualification - it is possible depending on the way of the qualification integration used. Check documentation on system parameter RECFA HRQUA (found in IMG node description for E-Recruiting -> Technical Settings -> Set System Parameters).
Kind Regards
Roman

Multi Language Display in EP when integrated with MDM

Hi,
Here is the situation:
I log into MDM Import manager in English Language and load the data.
I can see the data in MDM data manager "Language Detail" tab in all other languages(DE, ES, CN etc...) also irrespective of what langauge I log into MDM Data Manager.
But, when log into EP in German Langauge, I can't see the data.
Is there any way that we can display the data in EP even when we log in with different language other than English.
ANy help on this is appreciated.
Thanks a lot in advance!!
RK.

Hi Eduardo,
I tried the options you suggested, but the result is the same.
And I tried the following options also:
Scenario 1
Backend language was set to Arabic,
JCOs were set in Arabic
User Lang was set to English
Result: ESS Iviews are still displaying in Arabic.
Scenario 2
Backend language was set to English,
JCOs were set in Arabic
User Lang was set to English.
Result: ESS Iviews are still displaying in Arabic.
Scenario 3
Backend language was set to English,
JCOs were set in English
User Lang was set to Arabic
Result: ESS Iviews are still displaying in English.
Regards,
Srinivas

How do I repair lines when copying with my LaserJet 3050?

It is not my scanner I check it and it works fine, the problem is where the print itself is created. Almost like something is stuck like dirt or dust and it places it on every copy I make?
Thanks for your help!
Have A Great Day!
stormin

Hi stormin54,
What is the model number of your printer?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Does Adobe Connect 8 support all web browsers when integrated with Blackboard Learn?

When using Safari I get authenticated by Blackboard Learn, but when I attempt to create or enter a meeting, I'm continuously returned to the login screen to authenticate again.

I downloaded safari and tested to see wether I could log in and I had no problem. I created a virtual classroom and entered that too.... No problem. Is it not your firewall? If you can do everything else in AC (Adobe Connect) and the only problem is the virtual classroom can it not be the firewall? Do you use port 1935 for streaming the content in a virtual classroom? ... mmmm .... even if port 1935 were blocked it would not take you to the login page... mmm.. scrap that idea.
If anything I am able to connect to a virtual classroom via safari.

Gps won't work without data connection

does the gps feature need wifi or 3g to work cos i can't get it work without them.
and when i try to navigate to a destination it just says on "waiting for gps" even if i have wifi.
on my nokia E5

how long are you waiting for the gps and are you outdoors
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Is SPA8800 working without PSTN lines when integrated with BE3000 ?

Similar Messages

Maybe you are looking for