Is SPAN port not allowed in Nexus FEX Port ?
Hi
Customer want me to defined a SPAN port on N2K, it is a fex port. when I configure I got the following statement from the switch.
Is there any way to solve the problem?
n5k-N2K(config-monitor)# destination ?
interface Configure interfaces
n5k-N2K(config-monitor)# destination interface eth102/1/18
ERROR: Eth102/1/18: Configuration not allowed on fex interface
N5K VERSION
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2009, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
BIOS: version 1.2.0
loader: version N/A
kickstart: version 4.0(1a)N2(1)
system: version 4.0(1a)N2(1)
BIOS compile time: 06/19/08
kickstart image file is: bootflash:/n5000-uk9-kickstart.4.0.1a.N2.1.bin
kickstart compile time: 2/25/2009 0:00:00 [02/25/2009 08:29:12]
system image file is: bootflash:/n5000-uk9.4.0.1a.N2.1.bin
system compile time: 2/25/2009 0:00:00 [02/25/2009 08:56:57]
Hi,
A FEX port cannot be configured as a SPAN destination. Only a switch port can be configured and used as a SPAN destination.
See link below for more info:
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/release/notes/Rel_5_1_3_N2_1/Nexus5000_Release_Notes_5_1_3_N2.html
HTH
Similar Messages
-
My usb port not work and hot usb port aria please help me
my usb port not work and hot usb port aria please help me
Hi
Please find the link givenbelow might help you to fix your issue.
USB Device Troubleshooting
Fix Windows 7 “USB Device Not Recognized” Error
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
SOAMANAGER create logical port not allowed / forbidden
Hi all,
when trying to create a logical port, the window goes blur and the mouse pointer changes to a forbidden traffic sign, and I am not allowed to do anything else than reload the page and go to frontpage of SOAMANAGER. However I can see in the backgroud the "Web Service Administrator" page.
We are in SAP BASIS 700 P0026.
I don´t find any log file entry, neither ICM trace entry regarding this. I have tryed also all kind of web browsers and information on internet did not result in any similar case.
Any help is very usefull. Thanks,
PedroHi Eitan,
Please refer this link this might help you.
discussion:http://scn.sap.com/thread/1379938
Thanks,
Vidyasagar -
MSI GAMING 5 - ALL USB ports not working
hello
how are you every one
i have problem with rear usb port i can use it in safe mod and bios only but it does't work when the operition system start i try to slove the problem i updated bios i have other pc and same specification and it's work without any problem but with this mother borad rear USB ports not work also the USB ports on the case ALL USB PORTS NOT WORKING
Mouse and keyborad work in bios but if the system run don't work ! and trun off
and all usb devices
in safe mod work
rellay i don't know where is the problem !
CPU : Intel Core i5-4690K
M.B : MSI Z97 GAMING 5
RAM : G.Skill Ripjaws X 8GB DDR3 Kit
GPU : Gigabyte GeForce GTX 970 G1 GAMING
SSD:Corsair force LX 256 GB
HARD: Seagate Barracuda 1 T.B 7200 RPM
CPU COOLER : Cooler Master Hyper 212 Evo
PSU : Cooler Master GM-Series 750 watt
CASE : NZXT Phantom 410
Thank youQuote from: Nichrome on 28-January-15, 00:18:47
Hi,
What about if you try to install drivers from your product's page?
http://uk.msi.com/support/mb/Z97-GAMING-5.html#down-driver
And when exactly it starts to fail to work? Did you try to have OS just installed, restart it and see if it works then? Are you able to determine which driver installation causes USBs to stop working?
thank you
i just remove USB3 controller driver and work
thank you all :D -
Intrusion-detection-module 7 data-port 2: Capture not allowed on a SPAN destination port
Hi all
I have 2 switches Cat6509E. each with IDSM module
I have on first switch this commands
intrusion-detection module 7 data-port 1 capture
intrusion-detection module 7 data-port 2 capture
intrusion-detection module 7 data-port 1 capture allowed-vlan 4,6,16,17,66
intrusion-detection module 7 data-port 2 capture allowed-vlan 68,70,74,134,145
And when I trying to put the same on second switch I will get this error message
Intrusion-detection-module 7 data-port 2: Capture not allowed on a SPAN destination port
What does it mean?
Output "sh monitor" is the same on both switches
Session 1
Type : Service Module Session
Modules allowed : 1-9
Modules active : 1,7
BPDUs allowed : Yes
Session 2
Type : Local Session
Source VLANs :
Both : 4
Destination Ports : analysis-module 8 data-port 1
PeterHi Peter,
The first switch that you mention is configured (judging from the "intrusion-detection" commands) to use the VACL capture method of sending traffic to the IDSM-2 for inspection. You can read about this method here:
http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/cli/cli_idsm2.html#wp1030828
In short, you configure a VACL to define the traffic you want to capture and apply it to the appropriate VLANs. When traffic matches the VACL, it's copied to the IDSM-2 ports that have been configured with the "intrusion-detection module 7 data-port 1 capture" commands.
On the second switch it appears that there is a monitor session setup SPANing traffic to the IDSM-2 port. This is an alternative method of sending trafic to the IDSM-2 for inspection and is mutually exclusive with the VACL method on a particular IDSM-2 interface. You can read about the SPAN method here:
http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/cli/cli_idsm2.html#wp1030816
This method, in short, simply involves configuring a SPAN session with the IDSM-2 interface as the desination.
You'll need to choose one method or the other for configuring the second switch. If you want it to match the configuration on the first switch, simply remove the monitor (SPAN) session that's currently configured.
Best Regards,
Justin -
I just added 2 vlans Port-channel10 on two of my Nexus 5000's that go from the to a 6509 Catalyst switch. I get this error when I do a show log:(VLANs 133-134 on Interface port-channel10 are being suspended. (Reason: Vlan is not allowed on Peer-link) When I do a sh int trunk I see Po10 (int Eth1/3) that Vlans Err-disabled on Trunk. Another odd thing when I do an spanning tree summary neith 133 or 134 is added in to the summary? Why would spanning-tree be ignoring these two new vlans?
They are configured as so:
interface port-channel10
description "vpc 10 eth1/3 to 6506 po10 ten5/4"
switch port mode trunk
switchport trunk native vlan 999
switchport trunk allowed vlan 130.,133-134,139,145,155,160-175,239,242,254,999
vpc10
What can I do to get 133 and 134 vlans to stop erroring on Port-channel 10 on both Nexus 5000's?Firstly I should say I have not used Nexus switches so the following advice should be treated with caution.
Have you added the same vlans to the allowed vlans on your vPC peer link. That is what the error message seems to be telling you ie. they are not currently allowed.
They need to be allowed otherwise the vlans are suspended which is what is happening.
As I say I haven't used these switches so I can't say for sure if there is any downtime/disruption when you modify the allowed list but I think that is your problem from what I can see.
Jon -
Nexus 3548 : vlan is not allowed on peer-link
Hi, I had posted earlier but I think I have almost figured out the issue.. just not how to resolve it.
I have two nexus switches connected together with PO5.
Each nexus has a PO6 to connect to a single Cat3750
VLAN 46 on one of the switches is showing
%ETHPORT-3-IF_ERROR_VLANS_SUSPENDED: VLANs 46 on Interface port-channel6 are being suspended. (Reason: Vlan is not allowed on Peer-link)
Oddly the other switch seems to ok with VLAN 46.
I also see this
show vpc consistency-parameters vpc 6
... Local Remote.
Allowed VLANs - 1,31,34,46,200,600-605 1,31,34,46,200,600-605
Local suspended VLANs - 46 -
I just dont get it. Both switches are almost identical in their running configs.
Any thoughts?well the funny thing about the nexus configs is that I compared them in notepad ++ and they are the same.
vrf context management
ip route 0.0.0.0/0 10.31.0.9
vlan 1
vlan 31
name VLAN0031-VOIP
vlan 34
name vlan_nutanix
vlan 46
name VLAN0046-MITEL
vlan 200
name VLAN0200-ExchDAG
vlan 600
name VLAN0600-VMOTION
vlan 601
name VLAN0601-DMZ1
vlan 602
name VLAN0602-DMZ2
vlan 603
name VLAN0603-DMZ3
vlan 604
name VLAN0604-DMZ4
vlan 605
name VLAN0605-PNET
vpc domain 1
role priority 110
peer-keepalive destination 10.31.61.11 source 10.31.61.12
auto-recovery
interface port-channel5
switchport mode trunk
spanning-tree port type network
speed 10000
vpc peer-link
interface port-channel6
switchport mode trunk
spanning-tree port type normal
speed 1000
vpc 6
interface port-channel11
switchport mode trunk
switchport trunk allowed vlan 1,31,34,46,200,600-605
spanning-tree port type edge trunk
speed 10000
vpc 11
interface port-channel12
switchport mode trunk
switchport trunk allowed vlan 1,31,34,46,200,600-605
spanning-tree port type edge trunk
speed 10000
vpc 12
interface port-channel13
switchport mode trunk
switchport trunk allowed vlan 1,31,34,46,200,600-605
spanning-tree port type edge trunk
speed 10000
vpc 13
interface port-channel14
switchport mode trunk
switchport trunk allowed vlan 1,31,34,46,200,600-605
spanning-tree port type edge trunk
speed 10000
vpc 14
interface port-channel15
switchport mode trunk
switchport trunk allowed vlan 1,31,34,46,200,600-605
spanning-tree port type edge trunk
speed 10000
vpc 15
interface Ethernet1/1
switchport mode trunk
speed 1000
channel-group 6 mode active
interface Ethernet1/2
switchport mode trunk
speed 1000
channel-group 6 mode active
interface Ethernet1/3
description Nutanix
switchport mode trunk
switchport trunk allowed vlan 1,31,34,46,200,600-605
spanning-tree port type edge trunk
channel-group 11
interface Ethernet1/4
description Nutanix
switchport mode trunk
switchport trunk allowed vlan 1,31,34,46,200,600-605
spanning-tree port type edge
channel-group 12
interface Ethernet1/5
description Nutanix
switchport mode trunk
switchport trunk allowed vlan 1,31,34,46,200,600-605
spanning-tree port type edge
channel-group 13
interface Ethernet1/6
description Nutanix
switchport mode trunk
switchport trunk allowed vlan 1,31,34,46,200,600-605
spanning-tree port type edge
channel-group 14
interface Ethernet1/7
description Nutanix
switchport mode trunk
switchport trunk allowed vlan 1,31,34,46,200,600-605
spanning-tree port type edge trunk
channel-group 15
interface Ethernet1/47
switchport mode trunk
channel-group 5 mode active
interface Ethernet1/48
switchport mode trunk
channel-group 5 mode active
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
3750 confing
interface Port-channel6
switchport trunk encapsulation dot1q
switchport mode trunk
interface GigabitEthernet1/0/33
description ch nexus1-1
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 6 mode active
interface GigabitEthernet1/0/34
description ch nexus1-2
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 6 mode active
interface GigabitEthernet1/0/35
description ch nexus2-1
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 6 mode active
interface GigabitEthernet1/0/36
description ch nexus2-2
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 6 mode active
interface Vlan46
ip address 172.17.16.1 255.255.255.0 -
FEX 2232TM not recognized by Nexus 5010P
Hi there,
I don't have any clue what this problem might be so please help.
I have a brandnew FEX 2232TM which is connected to a NEXUS 5010P running the following firmware:
oftware
BIOS: version 1.5.0
loader: version N/A
kickstart: version 5.2(1)N1(1)
system: version 5.2(1)N1(1)
power-seq: Module 1: version v1.2
BIOS compile time: 11/30/10
kickstart image file is: bootflash:///n5000-uk9-kickstart.5.2.1.N1.1.bin
kickstart compile time: 7/12/2012 19:00:00 [07/13/2012 02:08:13]
system image file is: bootflash:///n5000-uk9.5.2.1.N1.1.bin
system compile time: 7/12/2012 19:00:00 [07/13/2012 03:23:16]
According to the Cisco download page it is the latest version and should definitely support the 2232TM.
The problem is that the FEX is completely not recognized by the parent Nexus.
It is connected via 8 FET modules. But when ich check the light on both sides I only have light on the NEXUS side never on the FEX side on all modules.
From my understanding this should be the root cause of the issue because no light = no link.
I tried standard 10GBase-SR and Twinax cables as well. Same behavior - the FEX is not recognized.
The status LED if of course orange on the FEX.
This is the FEX related config ont he NEXUS:
feature fex
fex 101
pinning max-links 8
description "FEX0101"
interface Ethernet1/1
switchport mode fex-fabric
fex associate 101
interface Ethernet1/2
switchport mode fex-fabric
fex associate 101
interface Ethernet1/3
switchport mode fex-fabric
fex associate 101
interface Ethernet1/4
switchport mode fex-fabric
fex associate 101
interface Ethernet1/5
switchport mode fex-fabric
fex associate 101
interface Ethernet1/6
switchport mode fex-fabric
fex associate 101
interface Ethernet1/7
switchport mode fex-fabric
fex associate 101
interface Ethernet1/8
switchport mode fex-fabric
fex associate 101
Can anyone give me a hint what I am missing here??
Any help is really appreciated.
Thanks a lot!I have a two lab switches running 5.2.1.N1.1 and connected in vpc with 2232TM and I am able to see the fex online without any problems. One side I have SFP-10G-SR and other side I have 3M Cisco Twinax cable.
here is the output from my lab,
5010-1# show fex
FEX FEX FEX FEX
Number Description State Model Serial
100 FEX0100 Online N2K-C2232TM-10GE SSI15380CPM
5010-1# show fex 100 detail
FEX: 100 Description: FEX0100 state: Online
FEX version: 5.2(1)N1(1) [Switch version: 5.2(1)N1(1)]
FEX Interim version: 5.2(1)N1(1)
Switch Interim version: 5.2(1)N1(1)
Extender Serial: SSI15380CPM
Extender Model: N2K-C2232TM-10GE, Part No: 73-13626-03
Card Id: 164, Mac Addr: 28:94:0f:2e:12:82, Num Macs: 64
Module Sw Gen: 21 [Switch Sw Gen: 21]
post level: complete
Pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth1/1
FCoE Admin: false
FCoE Oper: true
FCoE FEX AA Configured: false
Fabric interface state:
Po100 - Interface Up. State: Active
Eth1/1 - Interface Up. State: Active
Fex Port State Fabric Port
5010-1# show interface e1/1 transceiver details
Ethernet1/1
transceiver is present
type is SFP-H10GB-CU3M rev A
name is CISCO-MOLEX INC
part number is 74752-9026
revision is A
serial number is MOL12240343
nominal bitrate is 12000 MBit/sec
Link length supported for copper is 3 m
cisco id is --
cisco extended id number is 4
DOM is not supported
5010-2# show fex
FEX FEX FEX FEX
Number Description State Model Serial
100 FEX0100 Online N2K-C2232TM-10GE SSI15380CPM
5010-2# show fex 100 detail
FEX: 100 Description: FEX0100 state: Online
FEX version: 5.2(1)N1(1) [Switch version: 5.2(1)N1(1)]
FEX Interim version: 5.2(1)N1(1)
Switch Interim version: 5.2(1)N1(1)
Extender Serial: SSI15380CPM
Extender Model: N2K-C2232TM-10GE, Part No: 73-13626-03
Card Id: 164, Mac Addr: 28:94:0f:2e:12:82, Num Macs: 64
Module Sw Gen: 21 [Switch Sw Gen: 21]
post level: complete
Pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth1/1
FCoE Admin: false
FCoE Oper: true
FCoE FEX AA Configured: false
Fabric interface state:
Po100 - Interface Up. State: Active
Eth1/1 - Interface Up. State: Active
Fex Port State Fabric Port
5010-2# show interface e1/1 transceiver details
Ethernet1/1
transceiver is present
type is 10Gbase-SR
name is CISCO-AVAGO
part number is SFBR-7700SDZ-CS2
revision is B5
serial number is AGD133133S4
nominal bitrate is 10300 MBit/sec
Link length supported for 50/125um OM2 fiber is 82 m
Link length supported for 50/125um OM3 fiber is 300 m
Link length supported for 62.5/125um fiber is 26 m
cisco id is --
cisco extended id number is 4
SFP Detail Diagnostics Information (internal calibration)
Current Alarms Warnings
Measurement High Low High Low
Temperature 44.18 C 75.00 C -5.00 C 70.00 C 0.00 C
Voltage 3.26 V 3.63 V 2.97 V 3.46 V 3.13 V
Current 6.48 mA 10.50 mA 2.50 mA 10.50 mA 2.50 mA
Tx Power -2.62 dBm 1.69 dBm -11.30 dBm -1.30 dBm -7.30 dBm
Rx Power -2.80 dBm -- 1.99 dBm -13.97 dBm -1.00 dBm -9.91 dBm
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning
So dont believe we have any interoperability issue with 5010 and 2232TM here. Before we swap out this fex, can you please open a case with Cisco support or let me know when you are available and I can do a webex to look at this switch to see if there is something more to this problem than what we already know ?
Thanks,
Vinayak -
FEX ports in SDP timeout/SFP Mismatch 6.2(2a) - Nexus 7009
Hi ,
kinldy help me to get rid of this problem , when i try to enable fex port in individual port or port channel it give me this error. I have rebooted and erase/renew the configuration but could not succeed. Appreciate your help and advise.
Regards,
RaghuHI Madhukrishnan,
Please find below details.
Ethernet3/11 is down (SDP timeout/SFP Mismatch)
admin state is up, Dedicated Interface
Hardware: 1000/10000 Ethernet, address: 5087.8942.6ec6 (bia 5087.8942.6ec6)
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, medium is broadcast
Port mode is fex-fabric
10 Gb/s auto-duplex,, media type is 10G
Beacon is turned off
Auto-Negotiation is turned on
Input flow-control is off, output flow-control is off
Auto-mdix is turned on
Rate mode is dedicated
Switchport monitor is off
EtherType is 0x8100
EEE (efficient-ethernet) : n/a
Last link flapped 00:03:04
Last clearing of "show interface" counters never
0 interface resets
Load-Interval #1: 30 seconds
30 seconds input rate 2960 bits/sec, 0 packets/sec
30 seconds output rate 0 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
Rack-23_N7k-1# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html
Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy
==========================
Secondary:
Rack-24_N7k-2# sh interface ethernet 3/11
Ethernet3/11 is down (Link not connected)
admin state is up, Dedicated Interface
Hardware: 1000/10000 Ethernet, address: 0008.2f2d.3226 (bia 0008.2f2d.3226)
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, medium is broadcast
Port mode is fex-fabric
10 Gb/s auto-duplex,, media type is 10G
Beacon is turned off
Auto-Negotiation is turned on
Input flow-control is off, output flow-control is off
Auto-mdix is turned on
Rate mode is dedicated
Switchport monitor is off
EtherType is 0x8100
EEE (efficient-ethernet) : n/a
Last link flapped 00:00:09
Last clearing of "show interface" counters never
0 interface resets -
I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content. Any Suggestions?
You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.
-
SSL problem: SSL Forbidden or 12204 SSL port specified is not allowed
Hello there,
we have a BIG PROBLEM on a production system.
Some user on internet using IEXplore 5.0x could'nt access our https page.
Error reported are:
SSL Forbidden
SSL port specified is not allowed
We are using SSL on port 7002
This is the weblogic properties reagrd SSL:.
weblogic.security.ssl.enable=true
# SSL listen port
weblogic.system.SSLListenPort=7002
Any suggestion?
Is there a possibility to use port 80 both for https and http?
Any help will be apprciated.
THANK'S!I think you need to setup your proxy server to allow 7002 port,
or use port 443 for SSL ( it is the default proxy secured port)
Hope this will help
Mohds
"Paul Patrick" <[email protected]> wrote:
If this is a production problem, you should file a problem report with BEA
Support.
But I didn't see any certificates for the server registered. Without
certificates and a private
key the SSL protocol will not work.
Paul Patrick
"Antimo" <[email protected]> wrote in message
news:3a12cc80$[email protected]..
Hello there,
we have a BIG PROBLEM on a production system.
Some user on internet using IEXplore 5.0x could'nt access our https page.
Error reported are:
SSL Forbidden
SSL port specified is not allowed
We are using SSL on port 7002
This is the weblogic properties reagrd SSL:.
weblogic.security.ssl.enable=true
# SSL listen port
weblogic.system.SSLListenPort=7002
Any suggestion?
Is there a possibility to use port 80 both for https and http?
Any help will be apprciated.
THANK'S! -
I purchased a new vehicle and the older ipod nano I have will not work through the USP port, only works through the aux plug. Is there a download i can get toput into the nano that will then allow me to use the USP port instead of the aux port?
Check with your dealer and see if there is a special cable available for connecting your iPod. It should have a dock connector on one end and USB and miniplug on the other.
-
Bypassing TCP port 25 restriction (i.e. worst ISP EVER; Mail is not allowed
Hi
The private company that runs my DOES NOT ALLOW Smtp connections on its "hi speed internet connection".
Meaning that Mail cannot function and I have to check via webmail.
I'm serious.
Their FAQ states:
Can I use email clients such as Microsoft Outlook or Outlook Express to send and receive emails?
No, you will only be able to use web browser based email such as Hotmail or Gmail; this is due to limitations (on TCP port 25) which have been implemented to protect you against other computer users sending unsolicited bulk emails (SPAM) via your computer.
Does anyone know a way to get around this as I NEED the functionality of Mail.....
Also,
Are all British ISPs this ridiculous?
Dieing to find a solution to this....... Many Many Many Many Thanks
PS. I already paid extra ($250USD) to enable 'super' internet which doesnt throttle VOIP, STREAMING, gaming, P2P etc.
LukeBeginning January 1, 2006 Port 587 has been standardized as the port to use for authenticated SMTP servers although most will still work with Port 25 as well. More and more ISPs are blocking port 25 as various jurisdictions are holding them responsible for spam and/or viruses originating on their network. With unauthenticated SMTP anyone can send using that server whether they have an account or not. So the ISPs block that port with the sole exception of their own SMTP server so they can scan the messages for spam and viruses. With an authenticated SMTP server where a valid account id and password are required to send messages the provider of the server assumes the responsibility for scanning all traffic through their server thus relieving the ISP of the liability.
Whether you think this is a big brother step or not, with estimates that spam on the internet is running as high as 70% of all email traffic, if it weren't for restrictions like this email would rapidly become an unusable tool. The only annoying thing I have found about this is how few ISP Tech Support people know about this. To often their solution is "you can only use another email provider through their webmail interface." -
Our IT Director will not allow the appropriate TCP and UDP ports to be opened on the district WAN
I have about 30 Apple TV Units and our IT Director will not allow the appropriate TCP and UDP ports to be opened on the district WAN. When our teachers try to log on to Apple TV to broadcast lessons, websites, etc., they are booted off the network after about 20 minutes.
Any ideas for how I might solve this without having to hard-wire the Apple TV Units?Honestly, you do not.
Either the IT director will cave and allow the appropriate ports or it doesn't work.
Hard wiring the ATVs will not rectify the problem. -
What kind of is this and how do I exterminate it?
“Not allowed to use restricted network port”
< Edited by Host >If you have anti virus software installed, try disabling that and try turning off the Firewall.
System Preferences - Security / Firewall.
Maybe you are looking for
-
Display message to user from sub vi to main vi
Hi, I have got a question of which I am pretty sure it has come across before, but I could not find it via the search function nor with Google. On my main vi I have got a link to a sub vi, this sub vi checks something and then gives a message to the
-
Wireless printer adapter issue
I purchased an HP802.11b/g Wireless Printer Adapter for an HP H470wbt printer; I installed the driver on a laptop with Windows Vista; I could never get the printer to work wirelessly; I recently purchased a new laptop with Windows 7 and attempted to
-
Sorting problem with baseball averages
Please help. I am new to iworks and am learning as I go. Overall I really just love it. Here is the proect that I am working on: I am doing a spreadsheet with the statistics for my son's baseball team. The spreadsheet looks really great. What I
-
Calling two BAPIs from single input field from Webdynro for ABAP
Hi experts , here i hve a small problem . i hve two BAPIs , both having olly one import parameter and hving messages as the export parameters . so how i hve to call them , give the correct method . thanks in advance setu
-
Simple auditing question...
Hello, We are running 11.2.0.2 on AIX 7.1. I'm trying to understand why our auditing is not behaving the way I think it should. First, we have the default auditing turned on as part of 11GR2. It seems to be capturing some things, but not always every