Is SQL Server 2008 R2 earliest version that can be used for RD Connection Broker in Windows Server 2012?
I am setting up redundancy for another RD Connection Broker? What is the earliest version of SQL that i can use in Windows Server 2012?
Hi,
SQL Server 2008 R2 is listed as the minimum version. I have not tried earlier versions for use with RDCB.
RD Connection Broker High Availability in Windows Server 2012
http://blogs.msdn.com/b/rds/archive/2012/06/27/rd-connection-broker-high-availability-in-windows-server-2012.aspx
-TP
Similar Messages
-
System Image Restore Fails "No disk that can be used for recovering the system disk can be found"
Greetings
- Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used diskpart clean to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails. It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385 write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385 write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524 Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.------- -
When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified. Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?
The only limit is that of the device. No restrictions on how much of it you can use for music. Is part of your music library unchecked?
tt2 -
Are there mac keyboard stickers that can be used for worn-out keyboards?
Are there Mac keyboard lette stickers that can be used on worn-out keyboards?
http://www.thekeyboardcompany.com/keyboard-stickers/replacement-keyboard-sticker s/?gclid=CPrkpciwtL4CFSsV7AodpBcA8w
http://www.amazon.com/REPLACEMENT-KEYBOARD-STICKERS-BACKGROUND-NOTEBOOK/dp/B003D T15D6 -
Is iTunes 6.0.1 The Latest Version That Can Be Used On G3 iMac 600?
I have a G3 iMac 600 using OSX 10.4.11 which is the latest OS it can support.
iTunes 6.0.1 appears to be the latest version supported by this iMac as I can't get anything newer via Software Update and iTunesX lists a G4 as minimum requirements.
Is this correct?Hi, Ian,
iTunes 8.2.1 is, I believe, the last version that would work on your G3:
http://support.apple.com/kb/DL857
Regards. -
How do I create DRM Licenses that can be used for Offline Playback?
[ Background ]
Typically, a license is acquired from the DRM license server when the client video player encounters a video that is DRM-protected. However, some use cases call for the ability for end-users to be able to play DRM content when a network connection is not available to the device.
For example - the user wants to download a video from their home, acquire a license to play the content, and then get onto a train/airplane where a network connection isn't available. On the train/airplane/etc..., the end user expects to be able to watch their video that they downloaded at home.
[ DRM Policy Requirements ]
For this use case to be possible, the DRM license must be acquired when the network connection is available. In addition, the DRM license must be allowed to persist on the device disk. For this to be possible, one value must be present in the DRM policy:
1. Offline License Caching must be set to 1 or higher. This policy parameter indicates how many minutes a license is allowed to be persisted to disk once it's been acquired by the license server.
[ Workflow ]
Now that the content has been packaged with a DRM policy that allows for offline caching (persistance) of a license, the video player simply has to acquire the license before the network connection is lost. This can be accomplished via the typical API calls that the Video Player Application Developer would use to do a normal DRM license acquisition (DRMManager.loadVoucher()).
For example, by using the DRMManager ActionScript3 API: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/drm/DRMManage r.html
For other platforms supported by Adobe Access DRM (iOS, Android, etc...), please refer to the appropriate documentation around playback of DRM content on how to pre-fetch the DRM license.
[ Workflow - iOS ]
Enabling offline playback using the Primetime Media Player SDK (PSDK) for iOS requires a bit of self-extraction & instantiation of the DRM Metadata from the m3u8. The reason for this is that as of PSDK v1.2, the PSDK APIs do not expose an mechanism for extracting the DRM metadata.
You must manually (outside of the PSDK) get access to the DRM Metadata, instantiate a DRMContentData, and then use the DRMManager class to obtain a license for your content. Afterwards, you may download your HLS content and stream it to your video player application locally. Since the DRM license was pre-acquired before playback of the downloaded HLS content, your video player application does not require a network connection to acquire a DRM license. Below is a code sample of obtaining the DRM Metadata from the m3u8 manifest and then using it with the DRMManager singleton.
/* Main entry points, playlistURL is url to a top level m3u8. */
void PlayContent(NSURL* playlistURL)
DRMManager* drmManager = [DRMManager sharedManager];
if ([drmManager isSupportedPlaylist:playlistURL])
// First we need a handler for any errors that may occur
DRMOperationError errorHandler = ^(NSUInteger major, NSUInteger minor, NSError* nsErr)
/* report error. */
/* Synchronous call to DRM manager to extract DRM metadata out of the playlist. */
[_drmManager getUpdatedPlaylist:playlistURL
error:errorHandler
updated:^(NSURL *newPlaylist, DRMMetadata *newMetadata)
(void) newPlaylist; /* updated URL is not used for this code sample. */
if (newMetadata)
Assumes we are going to try to satisfy requirements to acquire license on the first policy in the metadata.
If there are multiple policies in the metadata, only 1 of them need to be satisfied for the license request to
go through.
DRMPolicy* drmPolicy = NULL;
for (id object in newMetadata.policies) {
DRMPolicy* drmPolicy = (DRMPolicy*)object;
break;
if (drmPolicy == NULL)
/* report error, this metadata is malformed. DRM metadata must contain at least 1 policy*/
if (drmPolicy.authenticationMethod != ANONYMOUS)
However, please note that the above only describes the DRM license handling for offline playback. The actual playback of video using the Primetime client SDK is not officially supported. You will have to use your own mechanism of saving and playback back HLS content locally within the application.
Theoretically, it is possible to save the HLS stream to the app, and then embed an HTTP server to the app to stream the HLS content back into the application. However, the Primetime client SDK doesn't not expose a way to do this directly, since it's not yet supported.
cheers,
/Eric.no, the headers, here's a picture of the headers on this page. When I use SEO for Firefox, it sees them on every other page but never on my iweb sites.
Quickpost this image to Myspace, Digg, Facebook, and others! -
Method that can be used for multiple views
Hello,
I've got three tables: Person, Company, Adress. Each Person/Company can have mulitple adresses. So Adress has a foreign key to Person and Company. In ADF BC I've created two views for Adress: PersonAdressView, that has PersonView as Master and CompanyAdressView that has CompanyView as Master. Now I want a copy functionality, that validates and copies a given Adress row. I want this functionality for PersonAdressView and for CompanyAdressView. Is there a possiblity to write generic code that can do this?
The logic that works on CompanyAdressView/CompanyAdressViewRowImpl and on PersonAdressView/PersonAdressViewRowImpl is the same. But the java datatypes are in so many lines different that it is almost impossible to use common code. Is it possible to resolve this problem with common base classes? If it is, I have no idea how to create them.
regards
JörgHi,
create a custom version of ViewObject (extending ViewObjectImpl) and base the two ViewObjects on your custom VO (extend).
Frank -
We are planning to build a competency catalogue to be used in our company, which is an IT services organization. Is there a standard competency catalogue available in HCM which can be used by IT Services organization? Or should it be built from scratch using place holders available in HCM?
- VikramIs the database on the server with the Niagara chipset ? If so, there are known performance issues for this combination. See MOS Doc 781763.1 (Migration from fast single threaded CPU machine to CMT UltraSPARC T1 and T2 results in increased CPU reporting) for details.
Bottom line, the Niagara chipset is not recommended for database servers - they are fine for application or web servers.
HTH
Srini -
Hello , i have the game fifa by ea sport but is not compatibile with mac. How can i make it work with mac?
If you bought it for windows or an ios device it will not work on a mac. You need the Mac version
-
What technology that can be used for the creation of Need Definition?
Being on SAP SRM 4.0, we currently have a requirement for creation of Need Definition( Basically a build up for the contract ). Need being collected from the Backend systems need to be validated and approved by Buyers & Lead Buyers in the SRM system.
Technically, this task is broken down to below tasks.
1) Creation of need definition screen - Basically a template where a need can be created with Items, Sub Items and other related information
2) Selection Screen for Buyers and Lead Buyers - This enables the the Buyers to select the Need Definition assigned to them based on the status.
3) Report - List of all the Need Definition( Item and Sub Item)satisfying the selection of step 2. with the possibility to navigate to the Need Definition screen ( Step 1) upon selection.
Now the question is,
what technology is recommended for the above Tasks? We thought it would be BSP but do you guys have any suggestions...
Do we have any issues in displaying the report in BSP? please let me know
Remember we are version 4.0 of SRM.
Thanks in Advance..
Mohan.You can use conditional styles to address specific browser issues (this is more than likely the markup you noticed).
Here's a good guide:
http://www.quirksmode.org/css/condcom.html -
Does any know anything about an Hand Held device that can be used for Racing Apps?
I was reading a review of one of the Racing games from the Mac App store and someone mentioned something about an Hand Held Device. Look 4ward 2 hearing back from someone soon.
ThanxSearching the iTunes store (where you will find the apps for handheld devices such as the iPad, IPad mini, iPhone and iPod touch) for "racing" finds a huge number of hits.
Perhaps you could be more specific as to what you are looking for? -
I am using quickoffice pro on my ipod. I want to bring files from my mac to my ipod using file sharing on itunes. I read to select officepro under apps then select from there but though office pro shows as an app I have, it doesn't show up on the apps under file sharing. How do I get it there?
Check Apple's Home Sharing tutorial: iTunes: Setting up Home Sharing on your computer - Apple Support
-
Possible to use Azure SQL as database for RD Connection broker high availability?
I am looking in to setting up a highly available Remote Desktop services service on Azure and note that the high availability for the Connection Broker service needs a full SQL database (rather than the LocalDB used for one instance). Is it possible
to use an Azure SQL database for these purposes (i.e. opposed to VMs running SQL Server)?
Has anyone had any experience with this? This would be nice as I am not looking at thousands of users and the Azure SQL would provide the high availability for the database without creating multiple (expensive) VMs running SQL server.So far there's no such a feature in azure sql, you can vote for it
http://feedback.azure.com/forums/217321-sql-database/suggestions/423275-enable-sql-service-broker-in-sql-azure -
I have an Script mostly that is generated by SSMS which works with-out issue on SQL Server 2008, but when I attempt to run it on a new fresh install of SQL Server 2012 I get an Msg 8631. Internal error: Server stack limit has been reached. Please look for
potentially deep nesting in your query, and try to simplify it.
The script itself doesn't seem to be all that deep or nested. The script is large 2600 lines and when I remove the bulk of the 2600 lines, it does run on SQL Server 2012. I'm just really baffled why something that SQL Server generated with very
few additions/changes AND that WORKS without issue in SQL Server 2008 R2 would suddenly be invalid in SQL Server 2012
I need to know why my script which is working great on our current SQL Server 2008 R2 servers suddenly fails and won't run on an new SQL Server 2012 server. This script is used to create 'bulk' Replications on a large number of DBs saving a tremendous
amount of our time doing it the manual way.
Below is an 'condensed' version of the script which fails. I have removed around 2550 lines of specific sp_addarticle statements which are mostly just copy and pasted from what SQL Management Studio 'scripted' for me went I when through the Replication
Wizard and told it to save to script.
declare @dbname varchar(MAX), @SQL nvarchar(MAX)
declare c_dblist cursor for
select name from sys.databases WHERE name like 'dbone[_]%' order by name;
open c_dblist
fetch next from c_dblist into @dbname
while @@fetch_status = 0
begin
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 2400 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script =
null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509F, @identityrangemanagementoption = N''manual'', @destination_table = N''TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false'', @ins_cmd = N''CALL sp_MSins_dboTABLE_ONE'',
@del_cmd = N''CALL sp_MSdel_dboTABLE_ONE'', @upd_cmd = N''SCALL sp_MSupd_dboTABLE_ONE''
EXEC sp_executesql @SQL
SET @dbname = REPLACE(@dbname, 'dbone_', 'dbtwo_');
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 140 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''DB_TWO_TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''DB_TWO_TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script
= null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509D, @identityrangemanagementoption = N''manual'', @destination_table = N''DB_TWO_TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false''
EXEC sp_executesql @SQL
fetch next from c_dblist into @dbname
end
close c_dblist
deallocate c_dblist
George P Botuwell, ProgrammerHi George,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
If you have any feedback on our support, please click
here.
Allen Li
TechNet Community Support -
Hi all,
I used the following code to create a new Database (ScottChangDB) and a new Table (marvel) in my SQL Server 2012 Management Studio (SSMS2012) successfully:
-- ScottChangDB.sql saved in C://Documents/SQL Server XQuery_MacLochlainns Weblog_code
-- 14 April 2015 09:15 AM
USE master
IF EXISTS
(SELECT 1
FROM sys.databases
WHERE name = 'ScottChangDB')
DROP DATABASE ScottChangDB
GO
CREATE DATABASE ScottChangDB
GO
USE ScottChangDB
CREATE TABLE [dbo].[marvel] (
[avenger_name] [char] (30) NULL, [ID] INT NULL)
INSERT INTO marvel
(avenger_name,ID)
VALUES
('Hulk', 1),
('Iron Man', 2),
('Black Widow', 3),
('Thor', 4),
('Captain America', 5),
('Hawkeye', 6),
('Winter Soldier', 7),
('Iron Patriot', 8);
SELECT avenger_name FROM marvel ORDER BY ID For XML PATH('')
DECLARE @x XML
SELECT @x=(SELECT avenger_name FROM marvel ORDER BY ID FOR XML PATH('Marvel'))--,ROOT('root'))
SELECT
person.value('Marvel[4]', 'varchar(100)') AS NAME
FROM @x.nodes('.') AS Tbl(person)
ORDER BY NAME DESC
--Or if you want the completed element
SELECT @x.query('/Marvel[4]/avenger_name')
DROP TABLE [marvel]
Now I am trying to create my first XML Schema Collection to do the Validation on the Field Name (Column Title) of the "marvel" Table. I have studied Chapter 4 XML SCHEMA COLLECTIONS of the book "Pro SQL Server 2008 XML" written by
Michael Coles (published by Apress) and some beginning pages of XQuery Language Reference, SQL Server 2012 Books ONline (published by Microsoft). I mimicked Coles' Listing 04-05 and I wanted to execute the following first-drafted sql in
my SSMS2012:
-- Reference [Scott Chang modified Listing04-05.sql of Pro SQL Server 2008 XML by Michael Coles (Apress)]
-- [shcColes04-05.sql saved in C:\\Documents\XML_SQL_Server2008_code_Coles_Apress]
-- [executed: 2 April 2015 15:04 PM]
-- shcXMLschemaTableValidate1.sql in ScottChangDB of SQL Server 2012 Management Studio (SSMS2012)
-- saved in C:\Documents\XQuery-SQLServer2012
tried to run: 15 April 2015 ??? AM
USE ScottChangDB;
GO
CREATE XML SCHEMA COLLECTION dbo. ComplexTestSchemaCollection_all
AS
N'<?xml version="1.0"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="marvel">
<xsd:complexType>
<xsd:all>
<xsd:element name="avenger_name" />
<xsd:element name="ID" />
</xsd:all>
</xsd:complexType>
</xsd:element>
</xsd:schema>';
GO
DECLARE @x XML (dbo. ComplexTestSchemaCollection_all);
SET @x = N'<?xml version="1.0"?>
<marvel>
<avenger_name>Thor</name>
<ID>4</ID>
</marvel>';
SELECT @x;
GO
DROP XML SCHEMA COLLECTION dbo.ComplexTestSchemaCollection_all;
GO
I feel that drafted sql is very shaky and it needs the SQL Server XML experts to modify to make it work for me. Please kindly help, exam the coding of my shcXMLTableValidate1.sql and modify it to work.
Thanks in advance,
Scott ChangHi Scott,
2) Yes, FOR XML PATH clause converts relational data to XML format with a specific structure for the "marvel" Table. Regarding validate all the avenger_names, please see below
sample.
DECLARE @x XML
SELECT @x=(SELECT ID ,avenger_name FROM marvel FOR XML PATH('Marvel'))
SELECT @x
SELECT
n.value('avenger_name[1]','VARCHAR(99)') avenger_name,
n.value('ID[1]','INT') ID
FROM @x.nodes('//Marvel') Tab(n)
WHERE n.value('ID[1]','INT') = 1 -- specify the ID here
--FOR XML PATH('Marvel') --uncommented this line if you want the result as element type
3)i.check the xml schema content
--find xml schema collection
SELECT ss.name,xsc.name collection_name FROM sys.xml_schema_collections xsc JOIN sys.schemas ss ON xsc.schema_id= ss.schema_id
select * from sys.schemas
--check the schema content,use the name,collection_name from the above query
SELECT xml_schema_namespace(N'name',N'collection_name')
3)ii. View can be viewed as virtual table. Use a view to list the XML schema content.
CREATE VIEW XSDContentView
AS
SELECT ss.name,xsc.name collection_name,cat.content
FROM sys.xml_schema_collections xsc JOIN sys.schemas ss ON xsc.schema_id= ss.schema_id
CROSS APPLY(
SELECT xml_schema_namespace(ss.name,xsc.name) AS content
) AS cat
WHERE xsc.name<>'sys'
GO
SELECT * FROM XSDContentView
By the way, it would be appreciated if you can spread your questions into posts. For any question, feel free to let me know.
Eric Zhang
TechNet Community Support
Maybe you are looking for
-
Using I Photo I selected a photo of two people and tried to crop one out to make an 8x10 of that person. Have tried numerouse times and have used the effects selection trying to make face clearer with no luck. cropped photo is very fuzzy. any sugg
-
Cleanliness and operating temperatures
I've harped on the need to occasionally evict the dust bunnies from computer cases for cool running. I have some hard data now. In a bunch of stuff from my Dad's estate, I found a dual-read digital thermometer. It reads the temps at its case, has a l
-
How to specify version of Acrobat Distiller?
I am using FM9. I click File > Save as PDF and I get the message "To execute Save as PDF command, you must have Acrobat Distiller version 5.05 or higher installed". I have Adobe Acrobat 7.0 Professional, which includes Distiller. How can I direct Fra
-
Which of these 2 Laptops would be best with Premiere Pro?
Need opinions between two laptops I'm eyeing as portable options for editing footage from my Canon HF S100. Really just want a portable 14" laptop that I can do relatively basic editing AVCHD footage on Premiere Pro relatively smoothly when I'm trave
-
Hi, I have a requirement like this. When payment terms of a particular PO are changed, that PO should be on hold(should not allow changes) until it is approved by purchase dir user. When it is approved, it should come to the previous state. How to pu