Is SQL Server Engine failover service spported for Orchestrator databases?
Hi there,
I have the following question:
Is SQL Server Engine failover service spported for Orchestrator 2012 R2 databases?
Thanx in advance.
Regards,
Chris
Hi,
yes, the issue that Orchestrator does not reconnect when the SQL server is restarted is has been fixed in System Center 2012 Orchestrator Service Pack 1 (http://support.microsoft.com/kb/2768366)
Orchestrator requires "only "the basic SQL Server features found in the Database Engine Service. No additional features are required.
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu
Similar Messages
-
SQL Server and Reporting Services
What is the best practice for replicating the same reports for different clients using different databases in the same SQL Server and Reporting Services?
For example:
Create a single database for each client.
Create a single data source in Reporting services for each client.
Create a folder in Reporting Service for each client, and replicate all the report and point each report to its correct data source.
Is there an easier method for this type of solution.Hi acedenoBI,
According to your description, you have reports which has same structure for each user. Now you want to have a folder for each client to keep their reports. And each client should have a single database and single data source. Right?
In Reporting Service, if we need one data source to connect different database dynamically, we may need to use parameter and create dynamic connection string. However, in this scenario, since we need to have a single folder and data source for each
client, so we can just make copies of the whole project. Modify the Connection string in each data source, change the Initial Catalog to be the corresponding database for the client. This can be an easy way to meet the requirement.
If you have any feedback on our support, please click
here.
Best Regards,
Simon Hou -
What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?
only below details found in error log
07:26:44.170 spid60
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:26:45.720 spid51
Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
07:26:45.730 spid51
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:28:57.840 spid64
Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
07:28:57.840 spid64
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
and below error on agent log
2014-01-01 07:26:28 - ? [131] SQLSERVERAGENT service stopping due to a stop request from a user, process, or the OS...
2014-01-01 07:26:43 - + [188] Scheduler engine timed out (after 15 seconds) waiting for 1 jobs(s) to stop
2014-01-01 07:26:44 - + [098] SQLServerAgent terminated (forcefully)
RahulWhat would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?
only below details found in error log
07:26:44.170 spid60
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:26:45.720 spid51
Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
07:26:45.730 spid51
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:28:57.840 spid64
Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
07:28:57.840 spid64
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
and below error on agent log
2014-01-01 07:26:28 - ? [131] SQLSERVERAGENT service stopping due to a stop request from a user, process, or the OS...
2014-01-01 07:26:43 - + [188] Scheduler engine timed out (after 15 seconds) waiting for 1 jobs(s) to stop
2014-01-01 07:26:44 - + [098] SQLServerAgent terminated (forcefully)
Rahul
Can you post the output of below query
select @@version.
If you are using SQl server express edition ,SQL server agent feature is not available.It seems from errorlog that you can start it but actually you cannot.But first confirm what is version and edition of your SQL server
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005
Description: "Internal error: An unexpected error occurred (file 'pcxmlacommon.cpp', line 43, function 'PCFault::RaiseError').
I'm getting above error in the pre- execute phase of a DFT when I'm trying to fetch data from a SSAS cube using mdx query.
I'm using OLE DB provider for connecting to cube.
I got one resolution for Error Code 0X8004005, which asked me to add 'Format= Tabular' in cube's connection string. It does not seem to work either. Can any one help me out on this???You are probably missing an update.
I saw a MS Connect post https://connect.microsoft.com/SQLServer/feedback/details/250920/error-using-oledb-or-datareader-to-get-analysis-services-data where that suggestion was proposed as a fix, but is for an older SQL Server version.
So do there is a question if you pull data from SQL Server 2012 SSAS using SSIS 2012 (so no other build is involved).
Arthur My Blog -
Microsoft OLE DB Provider for SQL Server 2012 Analysis Services Error Code = 0x80040E05
I've been running a package for 6 months without any issues that pulls data from a cube via MDX and moves it to a database.
We've recently moved to a new server x64 and the connections all succeed but at runtime (in 64 = T&F) I get the following error:
[SRC AdExchange [87]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
[SSIS.Pipeline] Error: SRC AdExchange failed the pre-execute phase and returned error code 0xC0202009.
I've installed SQL_AS_OLEDB, SQL_AS_ADOMD from Microsoft® SQL Server® 2012 SP1 Feature Pack
Why is my connection failing?The server has a 10Gbps network connection.
I've installed CU6 for SQL Server 2012 SP1
http://support.microsoft.com/kb/2874879/en-us#hfi
I'm still getting the same error at runtime in BIDS:
[SRC AdExchange [87]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
[SSIS.Pipeline] Error: SRC AdExchange failed the pre-execute phase and returned error code 0xC0202009.
Looking at the errorlog, everything looks normal until:
Launched startup procedure 'sp_ssis_startup'.
Attempting to load library 'xpsqlbot.dll' into memory. This is an informational message only. No user action is required.
Using 'xpsqlbot.dll' version '2011.110.2100' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required.
Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
Using 'xpstar.dll' version '2011.110.3000' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Using 'xplog70.dll' version '2011.110.2100' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
AppDomain 2 (SSISDB.dbo[runtime].1) created.
Unsafe assembly 'microsoft.sqlserver.integrationservices.server, version=11.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil' loaded into appdomain 2 (SSISDB.dbo[runtime].1).
Unsafe assembly 'microsoft.sqlserver.integrationservices.server, version=11.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil' loaded into appdomain 2 (SSISDB.dbo[runtime].1).
AppDomain 3 (master.sys[runtime].2) created.
Software Usage Metrics is enabled.
SQL Server is terminating because of a system shutdown. This is an informational message only. No user action is required.
Service Broker manager has shut down.
Error: 17054, Severity: 16, State: 1.
The current event was not reported to the Windows Events log. Operating system error = (null). You may need to clear the Windows Events log if it is full.
.NET Framework runtime has been stopped.
SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
The SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [ MSSQLSvc/XXXXXXXXXX.com ] for the SQL Server service. Error: 0xffffffff, state: 63. Administrator should deregister this SPN manually to avoid client authentication
errors.
The SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [ MSSQLSvc/XXXXXXXXXX.com:1433 ] for the SQL Server service. Error: 0xffffffff, state: 63. Administrator should deregister this SPN manually to avoid client authentication
errors.
Wondering about the unsafe assembly in SSIS and deregistering the SPN..
Anyone have any ideas on how to resolve this?
Thanks! -
Security Update for SQL Server 2008 R2 Service Pack 2 (KB2977320)
So i have been trying to install this update on one of our servers since it is showing up on our MBSA scans but it has been failing on one of our machines with the error code: 0x80070643
I downloaded the update and tired to install it manually. The installer returned: There are no SQL Server instances or shared features that can be updated on this computer. If that was true then why is SCCM still pushing the update to the machine and why
is the MBSA showing that it needs the update? Any advice would be helpful. Thanks!Hi David,
Based on my understanding, the error code: 0x80070643 was thrown out when you install KB2977320 with MBSA. And installation also failed when you download and install update manually.
Regarding the error code: 0x80070643, it can be caused if the MSI software update registration has become corrupted, or if the .NET Framework installation on the computer has become corrupted. To fix this issue, we can follow these methods:
Fix MSI software update registration corruption issues
Repair the .Net Framework
Uninstall and reinstall the .Net Framework
For more information, please refer to this link:
http://support.microsoft.com/kb/976982.
Besides, the security update is released for SQL Server 2008 R2 Service Pack 2, please check the version of SQL Server you are using. About how to check the SQL Server version, please refer to this article: How to tell what SQL Server version you are running
(http://www.mssqltips.com/sqlservertip/1140/how-to-tell-what-sql-server-version-you-are-running/). Then please download the Security Update for SQL
Server 2008 R2 Service Pack 2 from this link (http://www.microsoft.com/en-us/download/details.aspx?id=43957), and retry install it manually.
Best regards,
Qiuyun Yu -
I keep getting error code 0x80070643 when I try to install Sql Server 2008 R2 Service Pack 1 (KB2528583)
Operating System is Windows 2008 R2 64 bitHi JamesRead,
According to your description, when you install SQL Server 2008 R2 service pack 1, we need to verify if
you must have administrative rights on the computer.
There are multiple files available for the download, you will be prompted to select the files you need. We need to verify if you run the SQLServer2008R2SP1-KB2528583-x64-ENU.exe. Or you can install SQL server updates from the command
prompt and check if it can install successfully.
You can prepare an installation of database engine instance to include product update:
setup.exe /q /IAcceptSQLServerLicenseTerms /ACTION=PrepareImage /UpdateEnabled=True /UpdateEnabled=True /UpdateSource=<path where the update is downloaded> /INSTANCEID=<Instance ID> /FEATURES=SQLEngine
For more information, you can review the following article about installing Updates from the Command Prompt.
http://technet.microsoft.com/en-us/library/dd638066.aspx
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support -
Install Guide - SQL Server 2014, Failover Cluster, Windows 2012 R2 Server Core
I am looking for anyone who has a guide with notes about an installation of a two node, multi subnet failover cluster for SQL Server 2014 on Server Core edition
Hi KamarasJaranger,
According to your description, you want configure a SQL Server 2014 Multi-Subnet failover Cluster on Windows Server 2012 R2. Below are the whole steps for the configuration. For the detailed steps about the configuration, please download
and refer to the
PDF file.
1.Add Required Windows Features (.NET Framework 3.5 Features, Failover Clustering and Multipath I/O).
2.Discover target portals.
3.Connect targets and configuring Multipathing.
4.Initialize and format the Disks.
5.Verify the Storage Replication Process.
6.Run the Failover Cluster Validation Wizard.
7.Create the Windows Server 2012 R2 Multi-Subnet Cluster.
8.Tune Cluster Heartbeat Settings.
9.Install SQL Server 2014 on a Multi-Subnet Failover Cluster.
10.Add a Node on a SQL Server 2014 Multi-Subnet Cluster.
11.Tune the SQL Server 2014 Failover Clustered Instance DNS Settings.
12.Test application connectivity.
Regards,
Michelle Li -
SQL Server Agent Job intermittently running for packages on SSISDB
I created an SSIS package to pull data from OLAP Cube and push it into SQL Server using SSIS 2o12. I deployed the same on the SQL Server SSIS DB and created a SQL Server Agent Job to run the package. I have an account configured to run the job (not by
creating proxy in the job, but SQL Server Agent is running under that account), that has access to the OLAP Cube. The job is running sometimes and failing sometimes. Why the job behaving weirdly. Any help on the issue will help me a lot. I am using SQL Server
2012 SP1 enterprise edition (11.0.3000.0) (if it helps). The error message which pops up when it fails is :
OLE DB Source failed the pre-execute phase and returned error code 0xC0202009
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: ""Microsoft OLE DB Provider for SQL Server 2012 Analysis Services."" Hresult: 0x00000001 Description: ""Error Code = 0x80040E05, External Code = 0x00000000:."".
"Hi,
You are using Execute SQL Task to run a MDX query, right? If so, here is an approach/workaround for your reference. If the MDX query doesn’t have parameters, you can create a view in SQL running the MDX query and make the Execute SQL Task to get data
from that view. If the MDX query has parameters, you can try a Function and create a stored procedure, and then set the Execute SQL Task to execute that stored procedure.
Regards,
Mike Yin
TechNet Community Support -
An error occurred attempting to install SQL Server 2008 Express Service Pack 1
i have Setup application with complete prerequisite requirement package create from Visual Studio 2010 setup application.And yes this setup working fine in windows 7 and windows vista but not working in windows xp service pack 3.and getting error when install "An error occurred attempting to install SQL Server 2008 Express Service Pack 1"Give me solution as soon as possible.I have listed summery.txt and log.txt. please refer it.Summery.txt
===============================================================Component SQL Server 2008 Express has failed to install with the
following error message:
"An error occurred attempting to install SQL Server
2008 Express Service Pack 1."
The following components were successfully
installed:
- Microsoft .NET Framework 4 Client Profile (x86 and
x64)
The following components failed to install:
- SQL Server 2008
Express
See the setup log file located at
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\install.log' for more
information.Install.log
==========================================================================The following properties have been set:
Property: [AdminUser]
= true {boolean}
Property: [InstallMode] = HomeSite {string}
Property:
[ProcessorArchitecture] = Intel {string}
Property: [VersionNT] = 5.1.3
{version}
Running checks for package 'Windows Installer 3.1', phase
BuildList
The following properties have been set for package 'Windows
Installer 3.1':
Running checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running
operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1':
true
Result of checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is
'Bypass'
'Windows Installer 3.1' RunCheck result: No Install
Needed
Running checks for package 'Microsoft .NET Framework 4 Client Profile
(x86 and x64)', phase BuildList
Reading value 'Version' of registry key
'HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Client'
Unable to read
registry value
Not setting value for property
'DotNet40Client_TargetVersion'
The following properties have been set for
package 'Microsoft .NET Framework 4 Client Profile (x86 and x64)':
Running
checks for command 'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe'
Result of
running operator 'ValueEqualTo' on property 'InstallMode' and value 'HomeSite':
true
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe' is 'Bypass'
Running checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running
operator 'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Running checks for package 'SQL Server 2008 Express', phase
BuildList
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotExists' on property 'VersionNT': false
Result of running operator
'VersionLessThan' on property 'VersionNT' and value '5.1.2': false
Result of
running operator 'VersionEqualTo' on property 'VersionNT' and value '5.2.0':
false
Result of running operator 'VersionEqualTo' on property 'VersionNT' and
value '5.2.1': false
Result of running operator 'ValueEqualTo' on property
'AdminUser' and value 'false': false
Result of running operator
'ValueEqualTo' on property 'SQLExpressChk' and value '-1': false
Result of
running operator 'ValueEqualTo' on property 'SQLExpressChk' and value '-2':
false
Result of running operator 'ValueEqualTo' on property 'SQLExpressChk'
and value '-3': false
Result of running operator 'ValueEqualTo' on property
'SQLExpressChk' and value '-4': false
Result of running operator
'ValueLessThan' on property 'SQLExpressChk' and value '-4': false
Result of
running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value
'Intel': false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '1': true
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
Running checks for
command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
'SQL Server 2008 Express' RunCheck result: Install Needed
EULA
for components 'Microsoft .NET Framework 4 Client Profile (x86 and x64)' was
accepted.
EULA for components 'SQL Server 2008 Express' was
accepted.
Copying files to temporary directory
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
Downloading files to
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
(11/15/2014 3:59:51 PM)
Downloading 'DotNetFX40Client\dotNetFx40_Client_setup.exe' from 'http://go.microsoft.com/fwlink/?linkid=182804'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 3:59:53 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
(11/15/2014 3:59:53 PM) Downloading
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' from 'http://go.microsoft.com/fwlink/?LinkID=153228&clcid=0x409'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 4:00:22 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Running checks for package 'Microsoft .NET
Framework 4 Client Profile (x86 and x64)', phase BeforePackage
Reading value
'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Unable to read registry value
Not setting value for
property 'DotNet40Client_TargetVersion'
The following properties have been
set for package 'Microsoft .NET Framework 4 Client Profile (x86 and
x64)':
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe'
and parameters ' /q /norestart /ChainingPackage ClientX64ClickOnce /lcid
1033'
Process exited with code 0
Running checks for package 'Microsoft
.NET Framework 4 Client Profile (x86 and x64)', phase AfterPackage
Reading
value 'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Read string value '4.0.30319'
Setting value
'4.0.30319 {string}' for property 'DotNet40Client_TargetVersion'
The
following properties have been set for package 'Microsoft .NET Framework 4
Client Profile (x86 and x64)':
Property: [DotNet40Client_TargetVersion] =
4.0.30319 {string}
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Result of running operator 'VersionGreaterThanOrEqualTo' on property
'DotNet40Client_TargetVersion' and value '4.0.30129': true
Result of checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe' is
'Bypass'
'Microsoft .NET Framework 4 Client Profile (x86 and x64)' RunCheck
result: Install Succeeded
Running checks for package 'SQL Server 2008
Express', phase BeforePackage
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
'SQL Server 2008 Express'
RunCheck result: Install Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
and parameters '/q /hideconsole /action=Upgrade /instancename=SQLEXPRESS
/skiprules=RebootRequiredCheck'
Process exited with code
-2068578302
Status of package 'Microsoft .NET Framework 4 Client Profile (x86
and x64)' after install is 'InstallSucceeded'
Status of package 'SQL Server
2008 Express' after install is 'InstallFailed'
S S ManneHi Manne,
As your description, you come across an error when trying to install SQL Server 2008 express Service Pack 1 on windows XP Service Pack 3 machine. From your error log, I get the error(unable to read registry value). As my analysis, the issue could be due
to that your account doesn't have access to registry. Below are the recommendations for troubleshooting the issue.
1. Make sure that you log in as an administrator of the machine.
2. Please follow the steps below to make sure that you have granted the right permission to registry.
a. Located HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server in registry.
b. Right click and go to Permission, then you could see user accounts or groups. If your user account is not in the list, you could click Add to add your account there.
c. Select your account and Click on Advance.
d. Check on both check box ('Include inheritable permissions from this object's parent'.
and 'Replace all child object permissions with inheritable permissions from this object'), click OK.
e. Click OK again.
Regards,
Michelle Li -
SQL Server 2012 Reporting services Report Builder ClickOnce in SharePoint integrated mode
Hi
I've installed SSRS 2012 in Integrated Mode with SharePoint 2013.
I've created RS Application, I have the Content types for Report Builder Report but when I try to create a new Report Builder Report from a document library (using ribbon) it try to lauch the following url
http://sp2013/bi/_layouts/15/ReportServer/RSAction.aspx?RSAction=ReportBuilder&FileUrl=http://sp2013/_layouts/15/ReportServer/rs.rsapplication&SaveLocation=http%3A%2F%2Fsp2013%2Fbi%2FDocuments&Source=http%3A%2F%2Fsp2013%2Fbi%2FDocuments%2FForms%2FAllItems%2Easpx
which gives an 404 Not found error
I've installed Report Builder 3.0 as standalone because from SQL installation I didn't get an Report Builder
What else should I do ?
I've noticed that ReportBuilder_3.....application is in webservices folder of sharepoint
Please help
Sorin SanduHi Sorin,
SQL Server 2012 Reporting Services (SSRS) includes stand-alone and ClickOnce versions of Report Builder. The ClickOnce version can be used with Reporting Services installed in native or SharePoint integrated mode. For more information about how to start
Report Builder, please see:
http://msdn.microsoft.com/en-us/library/ms159221(v=sql.110).aspx
Reference:
SharePoint 2010 – SQL 2012 Reporting Services
SharePoint 2010 - SQL 2012 Reporting Services Part 2
Hope this helps.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support -
"SQL Server 2008 Reporting Services does not support map report items"
Hi,
I am trying some new feature that are introduced in SQL Server 2008 R2 version. While I try to use "Map" control within it, it threw the following error:-
"Error 1 The map, Map1, was removed from the report. SQL Server 2008 Reporting Services does not support map report items. "
-Also, similar kind of error I am getting for "Indicator" control.Hi Tej,
I think you get this error message when you are deploying a report to report server using BIDS, correct? If not, please provide more details on your scenario :-)
If I guessed correctly, then this message is a result of trying to deploy a map report (a SSRS 2008 R2 feature) to a non-R2 2008 report server. When deploying a report of RDL2010 format to a non-R2 report server, BIDS will downgrade the file to RDL2008 format, so that the non-R2 report server can process it. Any report elements using features not supported in RDL2008 will be dropped during this downgrade process.
BIDS gets the server version from a report project property called TargetServerVersion:
http://technet.microsoft.com/en-us/library/ee635898(SQL.105).aspx
If your report server is indeed the 2008 R2 version, then the TargetServerVersion property should be set to "SQL Server 2008 R2 Reporting Services." The project property page also has a "Auto Detect..." option if you are uncertain about the version of your report server.
Hope this helps!
Cheers,
LawrenceThis posting is provided "AS IS" with no warranties, and confers no rights. -
Hi
I'm working on upgrading sharepoint 2010 to sharepoint 2013 with sql server 2008 r2. I've ran into some problems but have been able to get a test farm upgraded. However to run SSRS 2013 it seems Sql Server 2012 Reporting Services are required. Upgrading
to a full sql server 2012 database isn't an option. I know that sql server 2012 reporting services can use sql server 2008 r2 as a catalog and content database so I was wondering could this be a workaround? Importantly would I need a separate machine/virtual
machine to host sql server 2012 reporting services? or could it live on the sql server 2008 r2 machine? Any pointers appreciated. Thanks DanRemember that SSRS must be deployed on the SharePoint server. Having said that, yes you can install SSRS 2012 SP1 on a server running SQL 2008 R2. And yes, you can use 2008 R2 as your Database Engine server while SSRS 2012 SP1 runs on the SharePoint server.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
SQL Server Agent Windows Service
I have created a override for parameter, Alert only if service startup type is automatic in monitor SQL Server Agent Windows Service to false, as my SQL Admin informs that this service startup type is Manual. As SQL servers are clustered, even SQL agent
service runs on even node and odd SQL agent service runs on the odd node. Should this resolve the issue my SQL Admin's are complaining they were not receiving notifications for SQL Agent stopping. Or, should it create noise as I should expect alerts from odd
SQL Agent service that are not running on even node and vice versa.
From SQL Server end,
Thanks, Harry :-)Hi,
The below article should be helpful:
Monitoring Clusters by Using Operations Manager
http://technet.microsoft.com/en-us/library/hh212773.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Share Data Source between multiple report projects in Microsoft SQL Server 2012 Reporting Services
I have a reports solution in 2012 which contains multiple report projects one each for target deployment folder and we use TFS 2012 for report deployment.
We have a template project which has a bunch of template reports and all the datasources used in different reports.
When I develop a report, I cannot "Preview" in TFS but, for deploy this used to work fine util the reports solution was in TFS 2010 & Visual Studio 2008 R2. Since we moved to TFS 2012 & SSRS 2012 not being able to deploy till I create all
the necessary datasources for each project and now all the developers complaining that they cannot develop reports in TFS itself as they cannot preview (this problem was existing previously) and now not being able to deploy as it errors for each report "Could
not find specified rds file". I tried messing around with the .rptproj file DataSources tag that did not help either by modifying it like below.
<DataSources>
<ProjectItem>
<Name>DB.rds</Name>
<FullPath>Template\Data Source\DB.rds</FullPath>
</ProjectItem>
</DataSources>
Is there a way I could share a Data Source between multiple projects in Microsoft SQL Server 2012 Reporting Services?
Thanks in advance.............
IoneHi ione721,
According to your description, you want to create a shared data source which works for multiple projects. Right?
In Reporting Services, A shared data source is a set of data source connection properties that can be referenced by multiple reports, models, and data-driven subscriptions that run on a Reporting Services report server. It must be within one project.
We can't specify one data source working for multple projects. In this scenario, we suggest you put those reports into one project. Otherwise you can only create one data source for each project.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
Maybe you are looking for
-
Photos Open in 64 bit version rather than 32
I installed CS5 yesterday and have both the 32 bit and 64 bit versions on my computer. I copied my plug-ins and they are located in the 32 bit version, so I prefer to have my photos open in that version of CS5. My problem is that if I have a photo
-
Planing connection for FR..
Hi all, I am creting a planning connection in FR to show cell text and supporting details entered, but it is giving me error while creating a planning connection. *"Error connecting to database connection support1: Error: Error getting CSS support in
-
Hello all! Present: Oracle Solaris 10 9/10 x86 and Solaris Studio 12.2 Whether there is at whom skeleton for С\С ++ OpenGL application. I can not find the decision - how to begin
-
Anyone got NTP working with a Windows 2008 NTP server?
Hello, I'm trying to sync the time on our routers and swithces with a Windows 2008R2 server, but it doesn't work. Has anyone managed to do this: Config: ntp master ntp update-calendar ntp server 192.168.2.164 sh ntp associations address re
-
Creating a Windows 7 Image using AIK
Hey All I am currently in a process of trying to create an image in my company that I can deploy on identical machines (Toshiba R830). I have currently re-installed one laptop from manufacturer’s partition, but I would like to now create an identica