Is "Start on Demand" possible?

Hi there,
Can anyone give me a suggestion on how to disable the autorun function of the Oracle 10g Xpress Edition ? Everytime I boot my pc, the oracle database service starts automatically.I want to "start it on demand" to avoid waste of memory when I am not working on the database .I know its not logical for a database, but I installed this XE edition to practice and learn , so I dont want it to run everytime I turn on my pc.
Any suggestion will be appreciated
Cheers
Alper

well yes it is possible...
in windows environment follow following steps...
go to run inside start tab...
write msconfig...
go to services...
just uncheck all oracle boxes...
click ok to apply settings...
restart your system to bring changes into action...
i hope this will work for u..

Similar Messages

Fast-Start On-Demand Roll Back

Fast-Start On-Demand Roll Back, how to enable it?
Regards
Neo

suzanne wrote:
Hi:
I'm sorry for not replying sooner but I have been away from home. I have found what you asked, I think. Can I just post it here or should I send it to you privately somehow? In other words, is there anything in this file which could pose a security risk if someone else sees it.
This morning, I was finally able to do a scan and then upgraded Sophos at which point I was able to turn on-access scanning back on without doing the things you suggested. Is this going to keep happening?
Many thanks,
Suzanne
Hello Suzanne,
Thanks for sending the logs to us, it was very valuable. The error that you (and probably others) are seeing is definitely an issue we've improved and likely fixed in the 9.4 release that is currently in preview. We expect to release this version to everyone at the end of this month, if everything goes to plan.
If you'd like to install it now, see this posting:
http://openforum.sophos.com/t5/Sophos-Anti-Virus-for-Mac-Home/Version-9-4-0-Preview-Now-Available/td-p/21401
Thanks again for your assistance, definitely helped show what went wrong and confirm its one of the issues addressed in the next update.

System start is not possible. Grey screen and demand for restart

After power-on I got a grey screen first, after approx. 15 secondes occurs a message "Restart the system". Unfortunately not more happens if I start the system from the HD. I have installed Mac OS X already new, but altrough the installation was sucessful I got the same result. Additinal I am not able to reject the DVD out of the DVD-drive.

Hi, tojapa - Welcome to Apple Discussions.
You are experiencing kernel panics.
In addition to the troubleshooting possibilities contained in the linked document, I wonder if you have you installed any after-market RAM? (If yes, then take it out and see if that helps.)
Do you have any peripherals beyond keyboard and mouse attached to this machine?
Are you able to boot into safe mode, holding down the Shift key immediately after the startup chime? (If you are able to boot into safe mode, you'll be able to eject the DVD.)
Also, how do you know the reinstallation of the system software was successful? Were you able to start up into the newly installed system?
Tuttle
1611/8319

SAP Netweaver 7.02 installation problem, "Start Instance" not possible??

Hello,
i need help with my "new" Problem during installation of SAP Netweaver, everything is ok until "Phase 21 of 24'" is reached,
here should the instance started, i receive this error:
"An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :ABAP processes of instance NSP/DVEBMGS00 [ABAP: STARTING] did not start after 10:10 minutes. Giving up.)."
I can see in the SAPmmc that msg_server.exe ist started and is green, but disp+work.exe is yellow and have a status:
"Running but dialog queue stand still."
That all make me confuse, why is there a such big difference in 32 and 64bit installtion?
I have this problem only on windows 7 64bit. on 32bit windows i nave never problems with installation.
Can anyone help me here please?
If need more information i can put here some logfiles?
Thanks for any help
Mirso

Here is the next file dew_w0:
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      00
M sid        NSP
M systemid   562 (PC with Windows NT)
M relno      7200
M patchlevel 0
M patchno    46
M intno      20020600
M make       multithreaded, Unicode, 64 bit, optimized
M profile    \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid        6896
M
M
M Thu Aug 07 20:23:20 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 6896) [dpxxdisp.c   1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm)        31696    (2264)
M DpShMCreate: sizeof(tm_adm)        5517056    (27448)
M DpShMCreate: sizeof(wp_ca_adm)        64000    (64)
M DpShMCreate: sizeof(appc_ca_adm)    64000    (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm)        584080    (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm)        156064    (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm)        268880    (80)
M DpShMCreate: sizeof(vmc_adm)        30128    (2152)
M DpShMCreate: sizeof(wall_adm)        (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm)    48
M DpShMCreate: sizeof(j2ee_adm)    3936
M DpShMCreate: SHM_DP_ADM_KEY        (addr: 000000000DD90050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DD90060
M DpShMCreate: allocated wp_adm_list at 000000000DD93030
M DpShMCreate: allocated wp_adm at 000000000DD93220
M DpShMCreate: allocated tm_adm_list at 000000000DD9AE00
M DpShMCreate: allocated tm_adm at 000000000DD9AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E2DDD60
M DpShMCreate: allocated appc_ca_adm at 000000000E2ED770
M DpShMCreate: allocated comm_adm at 000000000E2FD180
M DpShMCreate: allocated slock_adm at 000000000E38BB20
M DpShMCreate: allocated file_adm at 000000000E3B1CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E3F3730
M DpShMCreate: allocated vmc_adm at 000000000E3F37E0
M DpShMCreate: allocated gw_adm at 000000000E3FADA0
M DpShMCreate: allocated j2ee_adm at 000000000E3FADE0
M DpShMCreate: allocated ca_info at 000000000E3FBD50
M DpShMCreate: allocated wall_adm at 000000000E3FBD70
M DpCommAttachTable: attached comm table (header=000000000E2FD180/ft=000000000E2FD190)
M DpSesCreateTable: attached session table at 00000000029A0050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M
M Thu Aug 07 20:23:21 2014
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:23:23 2014
M ThInit: running on host BIG
M
M Thu Aug 07 20:23:24 2014
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.045) Unknown primary key (note 1459400)
C    (0.039) Define your own command buffersize (note 1340617)
C    (0.031) Dbm commands support added (note 1420733)
C    (0.027) Count of records for bulk insert optimized (note 1340617)
C    (0.021) Connect with special xuser key (note 1390464)
C    (0.018) Error handling for external update statistics changed (note 1340617)
C    (0.018) Dbsl procedure to update datasource information (note 1340617)
C    (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C    (0.013) Possibility to disable UPSERT statements (note 1340617)
C    (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C
C Thu Aug 07 20:23:25 2014
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK     : SQLDBC.H 7.7.4    BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1    BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data   : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams      : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY      : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel    7.8.01   Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators      : 1
C DB uses MVCC support          : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807202325, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX BC HC PRM RCT FRC TIM MAX OPT Date     Time   DBHost           Program
B 000 000 R/3              000000000 ACTIVE       NO NO NO YES NO NO 000 255 255 20140807 202324 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF            (addr: 0000000014830050, size: 4400000)
M SHM_ROLL_AREA        (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA        (addr: 0000000014C70050, size: 134217728)
M SHM_ROLL_ADM            (addr: 000000001CC80050, size: 2767448)
M SHM_PAGING_ADM        (addr: 0000000002E30050, size: 525344)
M ThCreateNoBuffer        allocated 548152 bytes for 1000 entries at 0000000002F70050
M ThCreateNoBuffer        index size: 3000 elems
M ThCreateVBAdm        allocated 30976 bytes (50 server) at 0000000002B00050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 00000000208D0160, size: 30000000, end: 000000002256C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022570160, size: 10240000, end: 0000000022F34160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F40170, size: 4194304, end: 0000000023340170)
B dbexpbuf: Buffer ESM   (addr: 0000000023350170, size: 4194304, end: 0000000023750170)
B dbexpbuf: Buffer CUA   (addr: 0000000023760170, size: 3072000, end: 0000000023A4E170)
B dbexpbuf: Buffer OTR   (addr: 0000000023A50170, size: 4194304, end: 0000000023E50170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 00000000133FFCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1500D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D150530
S    using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A               unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B   max_blocking_factor = 10, max_in_blocking_factor      = 127,
B   min_blocking_factor = 10, min_in_blocking_factor      = 127,
B   prefer_union_all    =   1, prefer_join                 =   0,
B   prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B   convert AVG         =   0, alias table FUPD            =   0,
B   escape_as_literal   =   0,
B   select *            =0x0f, character encoding          = STD / <none>:-,
B   use_hints           = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects        allocated 29124 bytes at 0000000002B20050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N ===   SAPSECULIB Version 5.4.28M-6
N =================================================
N
N Thu Aug 07 20:23:26 2014
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 720, [7200.0.46.20020600]
W    ITS Plugin: Int.version, [33]
W    ITS Plugin: Feature set: [23]
W    ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:23:27 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
    (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp    3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c    182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c    5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c   11087]
M
M Info for wp 0
M
M    pid = 6896
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    req.req_info =
M    req.tid = -1
M    req.uid = 4294967295
M    req.mode = 255
M    req.len = -1
M    req.rq_id = 65535
M    req.rq_source =
M    req.vm = no VM
M    last_tid = 0
M    last_uid = 0
M    last_mode = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ?                 tid -1    wp_ca_blk   -1      wp_id -1
M -IN-- action    -                 uid -1    appc_ca_blk -1      type -
M -IN-- new_stat NO_CHANGE         mode 255   len         -1      rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 6896) [dpnttool.c   339]
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      00
M sid        NSP
M systemid   562 (PC with Windows NT)
M relno      7200
M patchlevel 0
M patchno    46
M intno      20020600
M make       multithreaded, Unicode, 64 bit, optimized
M profile    \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid        7620
M
M
M Thu Aug 07 20:28:43 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7620) [dpxxdisp.c   1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm)        31696    (2264)
M DpShMCreate: sizeof(tm_adm)        5517056    (27448)
M DpShMCreate: sizeof(wp_ca_adm)        64000    (64)
M DpShMCreate: sizeof(appc_ca_adm)    64000    (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm)        584080    (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm)        156064    (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm)        268880    (80)
M DpShMCreate: sizeof(vmc_adm)        30128    (2152)
M DpShMCreate: sizeof(wall_adm)        (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm)    48
M DpShMCreate: sizeof(j2ee_adm)    3936
M DpShMCreate: SHM_DP_ADM_KEY        (addr: 000000000DE60050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DE60060
M DpShMCreate: allocated wp_adm_list at 000000000DE63030
M DpShMCreate: allocated wp_adm at 000000000DE63220
M DpShMCreate: allocated tm_adm_list at 000000000DE6AE00
M DpShMCreate: allocated tm_adm at 000000000DE6AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E3ADD60
M DpShMCreate: allocated appc_ca_adm at 000000000E3BD770
M DpShMCreate: allocated comm_adm at 000000000E3CD180
M DpShMCreate: allocated slock_adm at 000000000E45BB20
M DpShMCreate: allocated file_adm at 000000000E481CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E4C3730
M DpShMCreate: allocated vmc_adm at 000000000E4C37E0
M DpShMCreate: allocated gw_adm at 000000000E4CADA0
M DpShMCreate: allocated j2ee_adm at 000000000E4CADE0
M DpShMCreate: allocated ca_info at 000000000E4CBD50
M DpShMCreate: allocated wall_adm at 000000000E4CBD70
M DpCommAttachTable: attached comm table (header=000000000E3CD180/ft=000000000E3CD190)
M DpSesCreateTable: attached session table at 0000000002C50050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:28:45 2014
M ThInit: running on host BIG
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.045) Unknown primary key (note 1459400)
C    (0.039) Define your own command buffersize (note 1340617)
C    (0.031) Dbm commands support added (note 1420733)
C    (0.027) Count of records for bulk insert optimized (note 1340617)
C    (0.021) Connect with special xuser key (note 1390464)
C    (0.018) Error handling for external update statistics changed (note 1340617)
C    (0.018) Dbsl procedure to update datasource information (note 1340617)
C    (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C    (0.013) Possibility to disable UPSERT statements (note 1340617)
C    (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK     : SQLDBC.H 7.7.4    BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1    BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data   : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams      : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY      : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel    7.8.01   Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C
C Thu Aug 07 20:28:46 2014
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators      : 1
C DB uses MVCC support          : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807202845, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX BC HC PRM RCT FRC TIM MAX OPT Date     Time   DBHost           Program
B 000 000 R/3              000000000 ACTIVE       NO NO NO YES NO NO 000 255 255 20140807 202845 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF            (addr: 0000000014780050, size: 4400000)
M SHM_ROLL_AREA        (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA        (addr: 0000000014BC0050, size: 134217728)
M SHM_ROLL_ADM            (addr: 000000001CBD0050, size: 2767448)
M SHM_PAGING_ADM        (addr: 00000000124B0050, size: 525344)
M ThCreateNoBuffer        allocated 548152 bytes for 1000 entries at 0000000012540050
M ThCreateNoBuffer        index size: 3000 elems
M ThCreateVBAdm        allocated 30976 bytes (50 server) at 0000000002EF0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 00000000208B0160, size: 30000000, end: 000000002254C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022550160, size: 10240000, end: 0000000022F14160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F20170, size: 4194304, end: 0000000023320170)
B dbexpbuf: Buffer ESM   (addr: 0000000023330170, size: 4194304, end: 0000000023730170)
B dbexpbuf: Buffer CUA   (addr: 0000000023740170, size: 3072000, end: 0000000023A2E170)
B dbexpbuf: Buffer OTR   (addr: 0000000023A30170, size: 4194304, end: 0000000023E30170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 000000001334FCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1B00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D1B0530
S    using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A               unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B   max_blocking_factor = 10, max_in_blocking_factor      = 127,
B   min_blocking_factor = 10, min_in_blocking_factor      = 127,
B   prefer_union_all    =   1, prefer_join                 =   0,
B   prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B   convert AVG         =   0, alias table FUPD            =   0,
B   escape_as_literal   =   0,
B   select *            =0x0f, character encoding          = STD / <none>:-,
B   use_hints           = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects        allocated 29124 bytes at 0000000002F20050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N ===   SAPSECULIB Version 5.4.28M-6
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 720, [7200.0.46.20020600]
W    ITS Plugin: Int.version, [33]
W    ITS Plugin: Feature set: [23]
W    ===... Calling itsp_Init in external dll ===>
W      PpioRecoverLocks, table: 000007FFE04EDB30
W      PpioRecoverLocks, number of file locks 256
W      PpioRecoverLocks: file lock set to: 0000000000000000
W      PpioRecoverLocks: directory lock set to: 0000000000000000
W      PpioRecoverLocks: global lock set to: 0000000000000000
W      PpioRecoverLocks() done
W      PprcRecoverLocks, table: 000007FFE04EE020
W      PprcRecoverLocks: directory lock set to: 0000000000000000
W      PprcRecoverLocks() done
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:28:47 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
    (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp    3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c    182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c    5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c   11087]
M
M Info for wp 0
M
M    pid = 7620
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    req.req_info =
M    req.tid = -1
M    req.uid = 4294967295
M    req.mode = 255
M    req.len = -1
M    req.rq_id = 65535
M    req.rq_source =
M    req.vm = no VM
M    last_tid = 0
M    last_uid = 0
M    last_mode = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ?                 tid -1    wp_ca_blk   -1      wp_id -1
M -IN-- action    -                 uid -1    appc_ca_blk -1      type -
M -IN-- new_stat NO_CHANGE         mode 255   len         -1      rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 7620) [dpnttool.c   339]
trc file: "dev_w0", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      00
M sid        NSP
M systemid   562 (PC with Windows NT)
M relno      7200
M patchlevel 0
M patchno    46
M intno      20020600
M make       multithreaded, Unicode, 64 bit, optimized
M profile    \\BIG\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_BIG
M pid        7828
M
M
M Thu Aug 07 20:33:43 2014
M kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7828) [dpxxdisp.c   1314]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm)        31696    (2264)
M DpShMCreate: sizeof(tm_adm)        5517056    (27448)
M DpShMCreate: sizeof(wp_ca_adm)        64000    (64)
M DpShMCreate: sizeof(appc_ca_adm)    64000    (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm)        584080    (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
M DpShMCreate: sizeof(slock_adm)        156064    (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880
M DpShMCreate: sizeof(file_adm)        268880    (80)
M DpShMCreate: sizeof(vmc_adm)        30128    (2152)
M DpShMCreate: sizeof(wall_adm)        (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm)    48
M DpShMCreate: sizeof(j2ee_adm)    3936
M DpShMCreate: SHM_DP_ADM_KEY        (addr: 000000000DD90050, size: 6812336)
M DpShMCreate: allocated sys_adm at 000000000DD90060
M DpShMCreate: allocated wp_adm_list at 000000000DD93030
M DpShMCreate: allocated wp_adm at 000000000DD93220
M DpShMCreate: allocated tm_adm_list at 000000000DD9AE00
M DpShMCreate: allocated tm_adm at 000000000DD9AE50
M DpShMCreate: allocated wp_ca_adm at 000000000E2DDD60
M DpShMCreate: allocated appc_ca_adm at 000000000E2ED770
M DpShMCreate: allocated comm_adm at 000000000E2FD180
M DpShMCreate: allocated slock_adm at 000000000E38BB20
M DpShMCreate: allocated file_adm at 000000000E3B1CD0
M DpShMCreate: allocated vmc_adm_list at 000000000E3F3730
M DpShMCreate: allocated vmc_adm at 000000000E3F37E0
M DpShMCreate: allocated gw_adm at 000000000E3FADA0
M DpShMCreate: allocated j2ee_adm at 000000000E3FADE0
M DpShMCreate: allocated ca_info at 000000000E3FBD50
M DpShMCreate: allocated wall_adm at 000000000E3FBD70
M DpCommAttachTable: attached comm table (header=000000000E2FD180/ft=000000000E2FD190)
M DpSesCreateTable: attached session table at 0000000002990050 (len=161328)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M DpVmcSetActive: set vmc state DP_VMC_ENABLED
M DpVmcSetActive: set vmc state DP_VMC_ACTIVE
M DpVmcInit2: o.k.
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Thu Aug 07 20:33:44 2014
M ThInit: running on host BIG
M
M Thu Aug 07 20:33:45 2014
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45)
B New connection 0 created
C
C DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.045) Unknown primary key (note 1459400)
C    (0.039) Define your own command buffersize (note 1340617)
C    (0.031) Dbm commands support added (note 1420733)
C    (0.027) Count of records for bulk insert optimized (note 1340617)
C    (0.021) Connect with special xuser key (note 1390464)
C    (0.018) Error handling for external update statistics changed (note 1340617)
C    (0.018) Dbsl procedure to update datasource information (note 1340617)
C    (0.015) Special describe handling on MaxDB systemtables (note 1382175)
C    (0.013) Possibility to disable UPSERT statements (note 1340617)
C    (0.013) Check for external update statistics changed (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK     : SQLDBC.H 7.7.4    BUILD 009-123-173-450
C SQLDBC Runtime : libSQLDBC 7.8.1    BUILD 014-121-233-288
C SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data   : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams      : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY      : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel    7.8.01   Build 014-121-233-288
C Database release is SAP DB 7.8.01.014
C INFO : Database 'NSP' instance is running on 'minisap'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators      : 1
C DB uses MVCC support          : 0
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: minisap-NSP, since=20140807203345, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX BC HC PRM RCT FRC TIM MAX OPT Date     Time   DBHost           Program
B 000 000 R/3              000000000 ACTIVE       NO NO NO YES NO NO 000 255 255 20140807 203345 minisap
C INFO : SAP RELEASE (DB) = 702
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M vmcj/sgc_options: switch on template cleanup before cloning
M vmcj/sgc_options: switch off delayed session cleanup during shared gc
M ThVmcInitWaitForVm: th_maxWaitForVmTime=30
M ThVmcInitMaxErrCount: th_max_error_count=5
I MtxInit: 0 0 0
M SHM_PRES_BUF            (addr: 0000000014760050, size: 4400000)
M SHM_ROLL_AREA        (addr: 000007FEC3B40050, size: 268435456)
M SHM_PAGING_AREA        (addr: 0000000014BA0050, size: 134217728)
M SHM_ROLL_ADM            (addr: 000000001CBB0050, size: 2767448)
M SHM_PAGING_ADM        (addr: 0000000005930050, size: 525344)
M ThCreateNoBuffer        allocated 548152 bytes for 1000 entries at 0000000005A60050
M ThCreateNoBuffer        index size: 3000 elems
M ThCreateVBAdm        allocated 30976 bytes (50 server) at 0000000002BC0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000020890160, size: 30000000, end: 000000002252C4E0)
B dbtbxbuf: Buffer TABLP (addr: 0000000022530160, size: 10240000, end: 0000000022EF4160)
B dbexpbuf: Buffer EIBUF (addr: 0000000022F00170, size: 4194304, end: 0000000023300170)
B dbexpbuf: Buffer ESM   (addr: 0000000023310170, size: 4194304, end: 0000000023710170)
B dbexpbuf: Buffer CUA   (addr: 0000000023720170, size: 3072000, end: 0000000023A0E170)
B dbexpbuf: Buffer OTR   (addr: 0000000023A10170, size: 4194304, end: 0000000023E10170)
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M CCMS uses Shared Memory Key 73 for monitoring.
M
M Thu Aug 07 20:33:46 2014
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 000000001322FCE0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002D1900D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002D190530
S    using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 22076kb, dir_size: 21360kb.
A Attached to PXA (address 000007FED3B70050, size 300000K, 1 fragments of 277924K )
A PXA allocated (address 000007FED3B70050, size 300000K)
A *** WARNING: INTERNAL_KERNEL_VERSION of message server
A               unknown yet.
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|264|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FFDF0EE000 leng=20955136 end=000007FFE04EA000)
A >> Shm MMADM area (addr=000007FFDF5E2970 leng=242368 end=000007FFDF61DC30)
A >> Shm MMDAT area (addr=000007FFDF61E000 leng=15511552 end=000007FFE04E9000)
A RFC Destination> destination BIG_NSP_00 host BIG system NSP systnr 0 (BIG_NSP_00)
A RFC Options> H=BIG,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:720.00]):
B   max_blocking_factor = 10, max_in_blocking_factor      = 127,
B   min_blocking_factor = 10, min_in_blocking_factor      = 127,
B   prefer_union_all    =   1, prefer_join                 =   0,
B   prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B   convert AVG         =   0, alias table FUPD            =   0,
B   escape_as_literal   =   0,
B   select *            =0x0f, character encoding          = STD / <none>:-,
B   use_hints           = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects        allocated 29124 bytes at 0000000002BE0050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\NSP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is C:\usr\sap\NSP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="C:\usr\sap\NSP\DVEBMGS00\sec"
N ===...loading of Security Toolkit successfully completed.
N ===   SAPSECULIB Version 5.4.28M-6
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegister in process-driver OK
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 720, [7200.0.46.20020600]
W    ITS Plugin: Int.version, [33]
W    ITS Plugin: Feature set: [23]
W    ===... Calling itsp_Init in external dll ===>
W      PpioRecoverLocks, table: 000007FFE04EDB30
W      PpioRecoverLocks, number of file locks 256
W      PpioRecoverLocks: file lock set to: 0000000000000000
W      PpioRecoverLocks: directory lock set to: 0000000000000000
W      PpioRecoverLocks: global lock set to: 0000000000000000
W      PpioRecoverLocks() done
W      PprcRecoverLocks, table: 000007FFE04EE020
W      PprcRecoverLocks: directory lock set to: 0000000000000000
W      PprcRecoverLocks() done
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume BIG_NSP_00
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
E Enqueue Info: enque/use_pfclock2 = FALSE
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Aug 07 20:33:47 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3271]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1340
    (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp    3271]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c    182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c    5120]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c   11087]
M
M Info for wp 0
M
M    pid = 7828
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    req.req_info =
M    req.tid = -1
M    req.uid = 4294967295
M    req.mode = 255
M    req.len = -1
M    req.rq_id = 65535
M    req.rq_source =
M    req.vm = no VM
M    last_tid = 0
M    last_uid = 0
M    last_mode = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ?                 tid -1    wp_ca_blk   -1      wp_id -1
M -IN-- action    -                 uid -1    appc_ca_blk -1      type -
M -IN-- new_stat NO_CHANGE         mode 255   len         -1      rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 7828) [dpnttool.c   339]
// END OF FILE
i hope that we can bring my sap to runing?
best regards
mirso

Computer won't boot to windows - Fail in Start-Up Tests - Possible Hardware Issue

My mate has given me his laptop to try and fix but when i runf the hp start up tests id comes up with this:
can anyone help?

Hi,
Now the image is viewable, it would look like the Hard Drive has failed and will need to be replaced.
As a further test, if you wish to rule out a possible ( although far less likely ) problem with the sata controller, you try the following.
1. Create a bootable Ubuntu CD - a guide on creating an Ubuntu CD and the download can be found Here.
2. When created, follow the guide on the link below to Try Ubuntu.
http://www.ubuntu.com/download/help/try-ubuntu-before-you-install
The 'Try Ubuntu' option runs the OS from the CD without the need to install on your HDD. If this runs Ok ( it will be slow running from a CD ), this would tend to confirm that the problem is just with the HDD.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

IBook G3 start-up issues, possible logic board failure?

For the past few months the screen of my iBook G3 has been skipping and flashing and jumping at random times, quite often. If I move the screen to and fro it usually stops. I assumed this was just a bad connection with the LCD display and have basically ignored it.
Today, however, my screen froze completely while I was running Safari. Even the finder was frozen so I had to turn off the iBook by holding down the power button. When I restarted, it went through the usual start-up motions but after the grey start-up screen, it went to a blank blue screen. Only the mouse's cursor showed up at this point and nothing else. I was not asked to log in. Nor could I see my desktop.
I was just now browsing this board and found that the jumping screen issue I've been dealing with may have been logic board failure. Could this new blank blue screen problem also be a symptom of that? Or is it part of an overall hard drive failure?
The computer is quite old. I bought it in early 2002 and there's only about 2GB of space left on it at this point. So is it possible that the hard drive has crapped out?
I'm trying to restart right now in safe mode but it's been stuck at the grey start-up screen with rotating dial for about 40 minutes. Don't know what to do and I'm a little distraught at the idea of possibly having lost all of my files.
Any advice is appreciated. Thank you very much.

Hi, Christopher. Welcome to Apple Discussions.
Try booting into Safe Mode. This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
If this works you will see your normal desktop. Once completely started up in Safe Mode, try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
Select the named boot volume in the left sidebar, ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
If Safe Mode doesn't work, you will need to try repairing the hard drive from your Tiger Install disc.
Every time you have to do a forced shutdown instead of a normal one, there is a chance of hard drive damage and you should repair the hard drive, either by booting into Safe Mode OR by starting up from the Mac OS X Install Disc by inserting the disc and restarting your computer, holding down the C key as the startup chime is ending. Then click 'Next' at the language screen and choose Utilities > Disk Utility and select the hard drive in the left column. Choose the First Aid tab. Click Repair Disk to test and repair the hard drive.
Once you have repaired the hard drive with either Safe Mode or the Install disc's Disk Utility, then start up normally and repair permissions from Disk Utility in the Utilities folder on the hard drive.
Here's hoping that a little hard drive maintenance will help. Good luck.

Not starting MakBook Pro (possible SSD failure)

Not starting MakBook Pro with message "com.apple.launchd 1 com.apple.coreservices.appleevents 63 Exit timeout elapsed (1 seconds). Killing". Is there a way to do something at home, or just give it to service?

I am very new to this. Can I just RMA it with such little fuss? There should be about a month left on the warranty. Do I just ring them up and see what they say? What hardware do I need to purchase if they do not solve my problem? (Things like this never end happily in my experience).
Surely I could just replace both of the SSDs with a single one? The super raid card should work with just one SSD in it, right? Would I have to buy two? I don't like the idea of relying entirely on MSI allowing me to RMA it, it has to be fixable surely?
It would be nice to put a single msata SSD into the super raid card and just have one SSD so there's less things to break. Would that work?

Hp lalptop # QE334UA#ABA START UP PROBLEM POSSIBLE HARD DRIVE PROBLEM

COMPUTER willl not start up it has an error or failure ID UCQ9AC-5SC7AD-MFKR5G-609603. DOES ANYONE KNOW WHAT THIS CODE MEANS?

2000-329WM is the common model name.
Yes, that is a hard drive failure and means you need a replacement.
Post back with more questions and how you wish to proceed. If you wish to procure and install and configure a new hard drive let us know what country you live in and whether you have recovery disks.

Bootstrap with Java Web Start: is it possible?

I'm developing a chat for my university and I want to use Java Web Start. For the application client-side, I've write a class, named URLClientBootstrap.java, put it into a jar file, and my jnlp file refers to it.
This class does a bootstrap of another class of the server codebase, named AutClient.java and it's correctly throw thanks to JWS. But, if I click on a button, I need to make another bootstrap so, from AutClient.java, I need to bootstrap a class named RegClient.java but this doesn't append.
Why? I can make only one bootstrap? Or maybe JWS doesn't allow me to start another applet?

Hi,
Your concern is legitimate.
Basically to work with SLD you will not face any problem while creating the Business system but your main intention is to use it in configuration and that is in ID which is a client application and that needs Java Webstart to run on your local machine. Definitely you can create the Business system in SLD but to work with that one you need JavaWebstart
Java Web Start:
Using Java Web Start technology, standalone Java software applications can be deployed with a single click over the network. Java Web Start ensures the most current version of the application will be deployed, as well as the correct version of the Java Runtime Environment (JRE)
cheers,
Abhishek.

IPad not starting...possible drool connection

So, I left the room to get some laundry out of the dryer. My eight year old was with his baby brother. Baby brother started fussing, so eight year old (without my knowledge) put the iPad on the floor for him and walked out of the room when that seemed to calm him down. When I walked in a couple minutes later, the baby was on top of the iPad--along with his drool. I picked it up, and wiped it off. The drool didn't seem to be near any buttons or anywhere that it could have seeped into the unit. A couple hours later, I picked up my iPad to check my e-mail, and it would not turn on! It's been hours, now and it still won't turn on! What should I do?

Have you tried rebooting the ipad by pressing the home and off button together until the apple appears(about 10 secs) ignore the slider. this does not affect any of the data or settings

RT app doesn't start on power-up or re-boot

Hi Again, Gang:
This one is stumping me. I've finished a cRIO application, and am now in the process of getting it ready for distribution. The RT part of the app runs fine when I upload it from the host PC. When I set the app to run at startup from NV RAM, it doesn't run. Well, actually, to make matters worse--it DID run ONCE! This morning I powered the cRIO, then did other things for a while. I later looked at the unit and saw the user LED was flashing the sequence that says it's working.
I've read through the troubleshooting stuff on the web site. I've FTPd into the box and it looks like it's set up right. The dip switches are all off. I've waited for 10 mins to see if comes up after a while. I've experimented with the FPGA upload settings to see if that's the issue. (The RT won't get very far if the FPGA doesn't start) Is it possible that something with the shared variable engine is holding it up?
I'm about out of ideas. I really hope that someone can give me some!
Thanks in advance!
Roger

hi!!
Have you got any solutions. it seems there some bugs in lv2010. we are facing similar problems. some times every thing works but after restart it shows some error(blinking of yellow LED on RT).some time variable are not being published .i am working with mutltiple target in a single project. i have tried all options like auto deploy variable(ON/OFF)
seperate libraries for each target eventhough applications is similar for all targets. Just shareing my experience(pain)
Regards
Nageswar

Want to Completely Start Over

Hi,
This is my first post here. I searched around and couldn't find an exact answer.
I use Windows XP. I got an iPhone about 2 months ago, and before that I had never used iTunes before.
I'm a musician and a music lover, so I'm always wanting to transfer music to and from my iPhone. When I first got my phone, I downloaded iTunes and proceeded to create a huge clusterf*ck. It was transferring every single audio file on my computer to my phone, which I do not want to happen.
I must say that, so far, I've found iTunes incredibly non-intuitive and incredibly confusing.
Anyway, what I would like to do is completely start over if possible. And I'm not just talking about uninstalling and re-installing iTunes. (I've already done that probably 5 or 6 times for various reasons.)
I mean that I want to completely restore my iPhone to its factory settings and start completely over with iTunes as if I'd never used it before.
My biggest complaint is that it's a total, f*cking mess. It searched my entire computer for audio files, and so everything (little sketch recordings of song ideas, etc.) on my PC is showing up in iTunes, which I do not want. I only want the files that are in my "My Music" folder to show up, because those files are neatly organized into folders of albums, etc. As it is now, I have this mess of 283 items in the "song" category in iTunes, and most of them are not songs---they're just scratch recordings or whatever (things I only want on my computer).
So ... I know there's a way to bring the iPhone back to factory settings. But is there a way to do this with iTunes? I remember that the first time I installed it, it asked me some things like where I wanted to look for audio files and things like that. But now when I reinstall it, it doesn't do that anymore.
I really hate the iTunes interface, and I've tried several other alternatives. Sharepod seemed perfect, because I would just love a simple drag/drop interface like that. But unfortunately, it won't work properly for me. It won't recognize my photos, my purchased songs, or my voice memos. And it won't work when I try to copy a song from the PC to my phone.
And, of course, iTunes won't let you copy a song from the phone to your computer (does anyone know why?).
I just want a way to do both of those things in an easy fashion.
For the record, here are the alternatives I've tried, and none of them have worked completely for one reason or another:
Sharepod
Copytrans Manager (this works well, but it won't let you copy songs from the phone to the computer)
iFunbox (worked great for me on everything except music)
Is there a way to completely restart on iTunes as well as my iPhone? If I do this, will I lose the apps I've purchased? Or are they always available to me now from the app store to redownload?
I know this is much more of a ramble than a question, but I'm so frustrated at this point.

No one has any ideas on this?
Thanks

Search in start menu don't work, Windows 7, sp1.

Hi guys!
I have this really annoying problem with my newly install Win7 pro, sp1.
The Start Menu Search doesn't work. All I get are 3 files that look like categories (Programs, Control Panel and Files).
The normal search , in file explorer, works though.
What I've tried so far:
I have enabled search in the Start Menu Settings. In Customize Start Menu I have enabled "Search with public folders" and "Search programs and Control Panel".
I have reset my search indexing several times. I have tried different registry tweaks suggested in forums like these like these:
http://social.technet.microsoft.com/Forums/windows/en-US/cc594db0-dbe8-4255-a259-5c1914318c3d/search-in-start-menu-stopped-working
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/windows-7-start-menu-search-not-working/1b0bf595-a246-4397-8d05-73e117f046fe?page=6
Non of these suggestions worked for me. I tried importing the registry keys below as suggested by some posts above:
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\{ef87b4cb-f2ce-4785-8658-4ca6c63e38c6}]
"CanonicalName"="StartMenu"
"Mode"=dword:00000001"
PerceivedType"=dword:00000000
"Theme"="default"
"MostRelevant"="prop:System.Author;System.Keywords"
"LayoutType"=dword:00000001
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\{ef87b4cb-f2ce-4785-8658-4ca6c63e38c6}\TopViews]
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\{ef87b4cb-f2ce-4785-8658-4ca6c63e38c6}\TopViews\{00000000-0000-0000-0000-000000000000}]
"Name"="NoName"
"Order"=dword:00000000
"GroupBy"="System.StartMenu.Group"
"PrimaryProperty"="System.StartMenu.Group"
"SortByList"="prop:-System.Search.Rank;-System.DateModified;System.ItemNameDisplay"
"LogicalViewMode"=dword:00000001
This also didn't do anything.
I can't find anything else online that addresses this problem. Now I'm getting a little desperate. I'm no novice when it comes to Windows. I have spoken to seasoned Windows tech support people (not from MS). None of them nor I have ever seen this problem
before. There is very not much help online. Can anybody please help pointing me in the right direction.
Cheers

Hi,
Anything recorded in the event log? You can check the event viewer.
Regarding to the index option you mentioned, verify that the Start Menu is in the list of indexing option, then check the selected location under indexed location of start menu
If possible, I suggest you create a new user account, then copy the old files to the new user profile, please refer to this link
Fix a corrupted user profile
http://windows.microsoft.com/en-in/windows/fix-corrupted-user-profile#1TC=windows-7
Yolanda Zhu
TechNet Community Support

Error 229771 occurred at DAQmx Start Task - only in Labview project

Labview 2011 sp1
os: W7 32bits
DAQmx 9.7.0f0
ni-PCI 6251
Hi,
I'm working with a ni-PCI 6251 card. I got the error : Error -229771 occurred at DAQmx Start Task. Possible reasons :Internal sofware error occured in MIG software ... when I'm trying to launch my data acquisition vi. This error was already reported in this post :
http://forums.ni.com/t5/Academic-Hardware-Products-NI/Error-229771-occurred-at-DAQmx-Start-Task/td-p...
I tried to reinstall DAQmx as explained in the post but it unfurtunatly it did'nt fix my issue.
I've notice the following points :
1. This error appears randomly, after several reboots the vi will finally run without error
2. The error only appears when the vi is included in project
I will really appreciate any kind of help.
sebastian
Attachments:
test_daq_2.vi ‏23 KB

Bonjour,
Je vous invite à jeter un oeil sur le lien suivant :
http://digital.ni.com/public.nsf/allkb/03123D0E8A36C48E862577A4005B6BAA?OpenDocument
Il devrait résoudre votre problématique.
Cdlt,
Matthieu RICORD
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Été de LabVIEW 2014
12 présentations en ligne, du 30 juin au 18 juillet

Need Best way to start learning Oracle 11g DBA

Hi.This is Tejaswi.
I want to learn Oracle 11g DBA.I've downloaded all software's and Documentation for Orcl 11g R2. Now. i want to start Learning DBA. Can any one suggest me the best way to Start learning DBA?
Please suggest me the good books For Oracle Architecture and SQL.......

Hello Tejaswi,
The advice you got about reading the Oracle Concepts and 2 Day DBA documentation is very good advice.
I found that knowing some SQL*Plus and SQL Developer was also very helpful as, they both provide a way to interface with the database and try the things you read about. For SQL Plus, I used the book:
Oracle SQL*Plus: The Definitive Guide, 2nd Edition
By Jonathan Gennick
Publisher : O'Reilly
ISBN : 0-596-00746-9 I openly recommend it. It is easy to read, the book is very well thought out, it covers what you really need to know (and more too). The author explains the subjects very well. I would definitely learn some SQL Plus and SQL developer before getting into the 2 Day DBA document (make those 2 days about 7 days each if not more).
To learn SQL, I "sort of" used (I say "sort of" because I only read some parts of it available online and at the local bookstore):
Oracle SQL by Example
By Alice Rischert
Publisher: Prentice Hallit probably has more SQL than you'd need as a DBA but, it is an excellent book you may want to consider.
If you are starting from scratch, as I did, you'll find that you need to learn multiple things at the same time. I believe SQL Plus is the best place to start, along with possibly the Concepts document. That will give you a base to build upon.
HTH,
John.

Is "Start on Demand" possible?

Similar Messages

Maybe you are looking for