Is Stereo Mix available for the Satellite L300?

Hi,
I have been looking far and wide to see if I can find out how to get stereo mix for the L300 and I can't seem to find anything for it.
Is Stereo Mix available for the satellite L300?
Can I get it and if I can how?

Take a look here:
+Not possible to record sound from Internet+
http://aps2.toshiba-tro.de/kb0/TSB8A02HA0000R01.htm
At the end of this document you will find this:
+The Conexant Audio Device does not support "Stereomix" device.+
+This is specification of the Conexant hardware+.
If you have Realtek sound chip then the Stereo Mix is supported!!

Similar Messages

  • SB 5.1 VX, IS THERE ANY STEREO MIX AVAILABLE IN WIN 7

    IS THERE IS ANY SOLUTION? REGARDING THIS SB 5. VX,? THERE IS NO STEREO MIX AVAILABLE IN WIN 7 ?PLEASE HELP

    -Hi,
    I have downloaded the mentioned driver software. After downloading and installing it my woofer gives sound only when I disable CMSS-3D and only gives sound on LEFT-CENTER-RIGHT and woofer. and two speakers keep quiet. Please suggest friend , do I need to download any others software too to run smoothly. After downloading the application suggested by you my woofer gave sound . Thank you a lot. Please do mention next for other speakers.

  • I have a hard time understanding why I can't contact support about YOUR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the

    I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story...............         iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Need swappable CD rom drive for the Satellite 230CX

    After hours trawling the net, I still haven't found the part number for the swappable cdrom drive for the Satellite 230CX.
    Sadly a couple of sites say it's the PA2659U / XM-1402B, so I bought one from eBay, and it doesn't fit!
    Any help would be appreciated with either the straight answer or a pointer to a parts list.
    Cheers.

    Its an oldie.
    I dont found any information about this notebook.
    But usually it should be possible to order the supported and compatible CD rom part from the Toshiba service partner in your country.

  • I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

    I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

    Welcome to the Apple Community.
    Nobody here will have any information about that since the community is only made up of users like you or I. Anything else is mere speculation and speculation is not permitted here under the Terms of Use for these communities.
    Any responses you may receive may well be removed and would be wholly unreliable in any case.
    If you believe that Apple's product may be enhanced in anyway you can leave feedback here.

  • Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

    Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    And from the TOU of these forums:
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    If you are running Lion or later:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
    http://support.apple.com/kb/HT3381
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7.

  • I have Microsoft Office within my user name, but it is not available for the other 2 users. What do I need to do to allow them access?

    I have Microsoft Office within my user name, but it is not available for the other 2 users.  What do I need to do to allow them access to the software?

    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macstart/how-do-i-ena ble-office-for-all-users-on-one-mac/38bd94cc-d26c-41c9-8471-ee87d63ebfc9?msgId=0 fbd6314-a12a-4fed-85f9-d939208095ff

  • No Transfer Rule(s) available for the transfer structure 0FI_AR_4_DB in the

    Hi friends
      when i have trying to transport infocube 0fiar_c03 with infosource 0fi_ar_4 from development client.the following message has shown as error "No Transfer Rule(s) available for the transfer structure 0FI_AR_4_DB in the control table".pl let me know the possible cause of error.
    Rgds
    Tukuna

    dear Tukuna,
    it seems the transfer rules not transport.
    try in dev, change transfer rules,
    and from menu extras (beside go to) -> object directory entry -> transfer rules -> in next screen, check if package/development class is $TMP, click pencil icon, and choose your package/dev class, system will prompt request, create new request and transport.
    <b>if package/dev class isn't $TMP</b>, try following,
    rsa1->transport connection->left panel choose 'object type' and middle panel 'infosource' and 'select objects', and choose '0fi_ar_4' and 'transfer', then you will see 0fi_ar_4 in right panel, we will use this infosource to collect transfer rules.
    you may need to specify the source system assignment in transport connection when collecting objects, click 'source system assignment' and make sure your r/3 source system is marked.
    choose collection mode 'manual' and grouping 'in dataflow before', and 'execute', after objects collection finished, expand the infosource and make sure your transfer rules and datasources are there and marked. click transport (truck icon).
    also make sure you maintain the source system mapping in TARGET system (QAS), rsa1->tools->source system mapping (tcode rslgmp), fill 'orgsrcsys' with r/3 dev and 'trgsrcsys' with r/3 QAS, do the same for BW Prod with r/3 qas for 'orgsrcsys' and r/3 prod for 'trgsrcsys'.
    hope this helps.

  • Is there any type of HiFi Station available for the 2nd Gen. iPod shuffle?

    I was wondering if there is any type of HiFi Station available for the 2nd Gen. iPod shuffle.
    With HiFi Station I mean those docking stations which directly play the music from your iPod, so that you don´t need to connect to your Computer f.e.
    Does anybody know if something like this exist, or if it is only available for ALL other iPod models???
    Thanks already!
    Stefan

    YOu can use one of these with any other iPod "HiFi Station": http://www.griffintechnology.com/products/dockshuffle/
    Use your 2nd generation iPod shuffle in full-size Universal Dock devices.
    Your iPod shuffle is an incredible entertainment value in an incredibly small package. It delivers the music just like its full-size iPod cousins. But one thing it doesn't do is fit in the dock well in your made-for-iPod speaker system.
    That's why we made a Dock Adapter especially for 2nd generation iPod shuffle. The Dock Adapter is shaped just like the dock connector on the bottom of every full-size iPod. Plug it into your iPod shuffle's headphone jack, and suddenly the little guy fits in your iPod speakers just like the big guys.
    Take Griffin Dock Adapter with you, and you can play your iPod shuffle wherever there's a set of Universal Dock speakers.

  • I have recently updated to ios5 and when restoring apps etc it says my backup needs a password, i password that i cannot for the life of me remember...is there any 'forgotten password' option available for the backup please?

    i have recently updated to ios5 and when restoring apps etc it says my backup needs a password, a password that i cannot for the life of me remember...is there any 'forgotten password' option available for the backup please?
    i'm desperately in need as EVERYTHING my life revolvesaround is on there

    i have recently updated to ios5 and when restoring apps etc it says my backup needs a password, a password that i cannot for the life of me remember...is there any 'forgotten password' option available for the backup please?
    i'm desperately in need as EVERYTHING my life revolvesaround is on there

  • No repeat option available for the process step in process chain

    If the process chain failed at the ODS activation level, generally the repeat option will be available for activation and to continue the next step. But in some cases the repeat option will not be available for the process step.
    Is there any process to get the repeat option in the process chain?

    You can change this in RSPC > Settings > Maintain process types > Loading (or process of your interest) > put the check mark for Repeatable.

  • Is there an external graphics card available for the Mac Mini?

    Is there an external graphics card available for the Mac Mini?

    All you have to do is google your question.
    http://eshop.macsales.com/shop/Thunderbolt/

  • EDI: Partner profile not available for the Ack received

    Hi All,
    All the scenarios are IDOC -->XI --> File
    We have different scenarios of IDOC to File, where SAP sends IDOC to two (we have 5 here letu2019s say 2) diff FTP locations one say FTP1 and other FTP2 and we used 3 business systems in SLD.
    1)      one for Sender SAP system(say BS_SAP) and assigned a Logical System say LS_SAPCLNT100
    2)     Second one for the receiver FTP1 and assigned a Logical System LS_FTP1
    3)     Third one for the receiver FTP2 and assigned a Logical System LS_FTP2
    And we are getting the error in the Sender SAP System for the acknowledgement sent from the FTP1 server EDI: Partner profile not available for the LS_FTP1 when we send the IDOC to FTP1 and EDI: Partner profile not available for the LS_FTP2 when we send the IDOC to FTP2.
    This is because in SAP we do not have the Logical Systems for LS_FTP1 and LS_FTP2.
    Now my question is how to get rid of this? Do we need to create Logical systems in SAP for third Party Systems?
    If not how to overwrite and use a single LS for all of the third party Business Systems?
    Please suggest .
    Regards,
    Sridhar Reddy

    And we are getting the error in the Sender SAP System for the acknowledgement sent from the
    FTP1 server uF0E0EDI: Partner profile not available for the LS_FTP1 when we send the IDOC to FTP1 and EDI: Partner profile not available for the LS_FTP2 when we send the IDOC to FTP2.
    did you get a chance to go through the below threads:
    ERROR: idoc in R/3
    check out the blogs mentioned in the above link...
    Also check the last point (9) mentioned in the below blog:
    /people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi

  • What is the last version of Final Cut available for the G5 PPC & OS X 10.5?

    What was the last version of Final Cut available for the G5 PPC running OS X Leopard? I'd like to get a copy (from ebay or some other vendor).

    Final Cut Studio 2...FCP 6.0.6
    Shane

  • Is iBook application available for the Mac?

    Is iBook application available for the Mac?

    No. But there is a free application that can open eBooks called, Calibre - MacUpdate or CNET Downloads.

Maybe you are looking for

  • Help moving photos from starter edition 3.2 to Elements 11

    How do I move photos from Photoshop starter edition 3.2 to Photoshop elements 11?

  • Connection between 2 variables in bex variables screen

    Hi all, Can anyone help me please with the following scenario? I need to create a connection between 2 variables in BEx variables screen. Example: 2 variables in the selection screen: Prod Hier. 1 Prod Hier. 2 When a user make a selection in the firs

  • XL Reporter Add On Start Error

    hi. I could succesfully registed XL Reporter. When i restarted B1, its giving the following error: <b>Unalbe to Connect to XL Reporter Error! Unable to get document! Type: 1 Cause: Automation Error</b> Please suggest. thanks.

  • Open image in PSE organizer with PS CS3?

    Is there a way to change the full edit option to open files in Photoshop CS3 instead of Elements editor?

  • Nokia customer service

    Is there any way to escalate problems with Nokia customer service? I'm unable (over the last 3 weeks) to make any headway with Ovi email service and am unable to even connect to the voice support.