Is student version released at the same time with the full version?

I downloaded the LR4 to see how it compares to a LR2 I have at the moment. Adobe clearly states that users testing the beta can get the full version after March 31, but I did not find any information regarding the the student version release. Has adobe released the student versions simultaneously with the full versions, upon product release?

In the past, the student version has been the same price as the upgrade, and it has been possible to upgrade to a standard version from a student version. If that continues to hold, you'll be able to get LR4 immediately for the equivalent of the student price. Notice the "if" in that statement.
Hal

Similar Messages

I want to teach adobe illustrator to my students. If I buy CC-illustrator, Can we work in the same time with each devices with my ID ?

I want to teach adobe illustrator to my students. If I buy CC-illustrator, Can we work in the same time with each devices with my ID ?

No you have your own ID number

Is it possible to get 2-ch signals from TDS2012 oscilloscope at the same time with LabVIEW "7.0"?

Hi, everyone.
I've been trying to get the signals from 2-ch of Tektronix TDS2012 oscilloscope at the same time using IVI connection with LabVIEW "7.0"
I've already searched this developer zone for the answer.
I've tried the famous example: "IviScope - Acq Dual Wfm Edge Triggered.vi"
and it gave me the error message like:
Error -1074110451 occurred at IviScope Initialize With Options.vi
Possible reason(s):
Driver Status: (Hex 0xBFFA600D) Primary Error: (Hex 0xBFFA600D) The Config Server module is not present on the system.
I think I've installed all~ the required softwares for IVI. For example, ICP 2.2, IVI engine 2.0.46, and tktds1k2k ivi (instrument driver for tds2012, in fact this one is for LabVIEW "7.1"... :-P)
TDS2012 and my computer is connected through HPIB(GPIB) and it is shown on the MAX (a GPIB instrument as well as an IVI hardware asset)
I've tried GPIB connection but it gives me asynchronous signals...
Is it possible to get 2 signals at the same time with LabVIEW 7.0(not 7.1 or higher) by any means?
What in the earth is the "Config Server" in this case?
I don't need to sticking to IVI and any method to achieve my goal will be welcome.
Could anyone give me the hint for this problem, plz?

I think your problem is that the instrument specific driver is version 7.1 and you are using the class driver with 7.0. You can create your own 7.0 driver by downloading the LabWindows driver and using the Import CVI Instrument Driver under the Tools>Instrumentation menu.
Since you don't seem to have a good reason to use IVI, why don't you try the native LabVIEW driver at http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9139659CE034080020E748.... I believe you have all of the functions to setup each channel and then when you trigger the scope, both channels will be captured. You would then transfer each waveform separately. The data is always read sequentially but that's not important as long as both channels are triggered at the same time.

Can you use 2 bluetooth headphones at the same time with ipad?

I'd like to purchase 2 bluetooth headsets for my elderly parents to use with their ipad for FaceTime. They both typically use FaceTime at the same time to talk to their grandkids, but have difficulty hearing just using the ipad speaker. Is it possible to utilize 2 bluetooth headsets at the same time with ipad. If not, what's the best alternative? (Wired headsets will not work as they also are often caring for another young grandchild at the time and can't be tethered)

You can only pair to one BT headset at a time.
As an alternative, have you considered a BT speaker so you can increase the volume of the Facetime call?

Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc)?

Would like to use 4nr iPads as an autocue system. Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc) and the others operating as slaves? Can this be done without the use of 3G or a remote Wifi hub? I would appreciate your input.................

Open the document in Acrobat Reader and use the menu Window > New Window.

Can you use 2 sets of bluetooth headphones at the same time with the Ipad 4?

Hi, I was wondering if anyone could tell me if I can use 2 sets of bluetooth headphones at the same time with the Ipad?
It is so my children can watch a film or listen to music together.
Thanks

No

I have created a form which needs to be completed once a week for 6 weeks. On completing week 1, weeks 2 - 6 are completed at the same time with week 1 information. please help?

I have created a form which needs to be completed once a week for 6 weeks. On completing week 1, weeks 2 - 6 are completed at the same time with week 1 information. please help?

Hello, thanks for replying.
Yes they just copy to the next page, the fields are the same. The document is an observation to school lessons so it needs to be consistent but with different data on.

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

16 channels of audio recording at the same time with a MAC BOOK?

Hi,
I want to know how many channels of audio I can record at the same-time with a MAC BOOK (2.16GHz Intel Core 2 Duo, 1GB memory 120GB hard drive, Double-layer SuperDrive), firewire audio device and Logic Pro 8?
You see I am aiming to record a live gig and I want to come into a firewire recording interface with 16 channels of audio all at the same time (24-bit, 44Khz) Does anyone know if this is possible? Or am I looking for trouble? No plug-ins will be used just record straight in. Anyone have some experience with this?
Thanks.

Ok, like this:
Macbook - FW Port - FW Cable -In- MOTU Traveler -Out- External Harddrive.
Firewire is capable of chaining units.
Also plugged into your motu traveler will be an optical cable coming from the ADA.
This will carry the 8 channels of audio it outputs.
Also another good thing to do is to also have an optical cable FROM the optical output of your Traveler into the Behringer's input.
That way you can sync the Behringer's digital clock to that of the Traveler, giving you a slightly better sounding signal that if you were to sync the traveler to the Behringer. This is simply because the traveler has a better quality digital clock than the Behringer unit so it's best to use that. To do this you just select "Adat input" on the back of the Behringer, and leave the Travelers sync to "Internal Clock". It is only a very very slight difference and you may not be able to notice the difference but for the cost of an optical cable it's worth doing.
It will all make a lot more sense when you have the two units and the harddrive all plugged in.

Do I have the chance to get Photoshop for free if I'm a student? I mean the full version and not the trial.

Do I have the chance to get Photoshop for free if I'm a student? I mean the full version and not the trial.

No. Just the student rate on a permanent or subscription license. Some places do include Photoshop and other products as part of the tuition, but it is a separate arrangement and most likely temporary.
The Photography Plan is a fine deal at $10 a month. Creative Cloud Photography plan | Adobe Creative Cloud
Otherwise there are free and paid lower cost Photoshop alternatives you can look into.

My ipod has a black screen. I have tried to hold the sleep/off button and menu button at the same time with no luck. I connected to my computer and tried restore on itunes - still with a black screen a voice said "screen locked' code 542

My ipod has a black screen. I have tried to hold the sleep/off button and menu button at the same time with no luck. I connected to my computer and tried restore on itunes - still with a black screen a voice said "screen locked' code 542

Is the iPad charged? Plug it in with the charger/wall outlet for half an hour and try again to reboot by holding both the power and home buttons until the apple logo appears.

Acquire Analog and Digital inputs at the same time with 6025E card

I have 6025E DAQ card, all the analog channels are used
up. There are several digital signals, such as flowmeter. Can I acquire both kinds of data at the same time with my 6025E card? Thanks for your help.

I suggest you search the examples that ship with LV
Digital
Find Examples>>>Hardware Input and Output>>>Digital Input and Output>>>8255
for doing each type of I/O seperately.
When you have found two examples. Just try to run the two at the rate use need in your final app.
Post follow-ups Q's here. I am not personally familiar with that deveice so I can not speak from experience.
I would generally expect that if you sample rate is low (i.e. <10Hz) you maybe happy with the results. If you want to run faster or have the PC do something else at the same time, the timing of the signals form the DIO lines may be suspect.
So...
It depends.
Trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Can I record video and line in mixer at the same time with iPod touch?

Can I record video and line in mixer audio at the same time, with the iPod touch?

What is a "line in imxer audio" You can use an externeral mic plugged into the headphone jack to record auid for a video using the 4G iPod's camera.

How to control 8 current sources in the same time with labview?

Hi,
I'm a French student who have to create a program which is able to control 8 current sources in the same time.the aim is to plug the currents sources in the input of a laser.
If someone has an idea, it would be very nice to inform me !!!
Thanks in advance.
Nico31dcu

Is it really Tektronik or is it Tektronix. Tektronix is a major test equipment manufacturer. I can't find any reference to that model number on their site, though.
There are several resources for learning instrument control. One good place to start is http://zone.ni.com/devzone/cda/tut/p/id/4357.
Assuming that you have a NI GPIB controller for the pc, you will be using the Instrument I/O Assistant or the VISA commands to send/recieve data from the current sources. Without having access to the programming manual, I can't give specifics on what commands you need to send. Your topic mentions controlling them at the same time. Truly simultaneous control is possible in only a few situations. If you have a couple current sources in the same mainframe, you may be able to send a single command to set them all. It will really depend on the commands that the vendor has implemented. With separate mainframes, you will send commands first to one, and then another, etc. Again, depending on what the vendor has implemented, it may be possible to sequentially program all sources to a ready state and then trigger all simultaneously.

Run in the same time with watching the result?

I have a question
how can I get 2 or more VI's in the same program run simultaneously, each has several SubVI, and if I press a button then I get the result of a VI and without stopping at the same time on another button and I get the result from other VI?

Natsheh,
thank you for your interest in learning LabVIEW. There are two possible ways of approaching your task:
a) using global or shared variables which store the data and can be accessed from the subVIs as well as from the main VI, or
b) using VI Server methods to query the actual values of indicators from the subVIs in your main application window.
Using global variables is the easiest implementation, and a good starting point. When your LabVIEW skills advance, you will want to also look at VI Server technologies, as they provide a more flexible way to access subVI data.
To get you started, let me please recommend the following introduction to LabVIEW:
Getting Started with NI LabVIEW Student Training
http://zone.ni.com/devzone/cda/tut/p/id/7466
Module 6 of this online training deals with global variables, and should give you a first overview.
If you are already familiar with LabVIEW Projects, you may as well use Shared Variables. They are introduced here:
Using the LabVIEW Shared Variable
http://zone.ni.com/devzone/cda/tut/p/id/4679
Also, I would like to point you to our "real-world" training courses which are held thoughout the world. The LabVIEW courses Basics I & II together not only cover these aspects (SubVIs, Variables, VI Server calls, ...), but also give you a good start in "thinking LabVIEW" :-)
Best regards,
SFK

Is student version released at the same time with the full version?

Similar Messages

Maybe you are looking for