Is SunMC the tool of choice?

Hello, world!
I'd like to hear your oppinon: is SunMC the tool of choice, and if so, what modules do I need?
I'd like to have my Sun server hardware monitored, in addtion to the Solaris monitoring we already have with BMC Patrol.
The tool should tell me about
* partial power loss/power supply failure
* fan defects
* over-temperature-events
* disk failure.
* other possible hardware failures (if there are some left to be monitored)
The marketing sheets for SunMC don't state clearly that this kind of monitoring can be done with SunMC, so I'd like to ask the community: what do you think.
Thank You!
Peter

Hi Peter,
SunMC is definitely what you're looking for... but my opinion is biased because I install a lot of it for many customers :)
You should also consider SunMC->BMC integration. If you're primarily a Patrol shop then you can use SunMC as a black-box just for the Sun hardware errors, and have those errors feed to BMC so you're not stuck looking at a SunMC Console all day. Patrol will treat it as just another supplemental source of alarms, so you can use any existing procedures or notification rules you have set up.
http://www.halcyoninc.com/products/AdapterPEM/index.php
Regards,
[email protected]
http://www.HalcyonInc.com

Similar Messages

How do i get to the tool bar choices for safari

Where do i find the choices to add to the tool bar for safari in Lion
how do i get to it?
also anyone know how we can customize the left side panel on mail??

I cannot access the PRIVACY menu from the Tools-Options menu to make changes to cookies and history. I can access every other menu on that page (General, Tabs, Content, Applications, Security, and Advanced. But Not PRIVACY. Please help.

I need to reset/change/clear my cookies, probably clear my cache, and change my history preferences. When I use the Tools-Options choice to bring up the appropriate menu (General, Tabs, Content, Applications, Privacy, Security,and Advanced) all allow me access to make changes (or not), the PRIVACY tab does not open up. It does no allow access to any info contained there in. It is like it doesn't exist or isn't even there. Also, in the Tools menu on the Firefox toolbar, both "Stop Private Browsing" and "Clear Recent History" are grayed out. What gives? Thank you for your help.

This can be caused by in incompatible/malfunctioning add-on. To test if this is the case follow the procedure in the [[troubleshooting extensions and themes]] article.

When I click on the Tools tab, the Sync Set Up is not an option. The only choice is "sync now". When I click this option, nothing happens. Why is this happening?

I have the latiest version of Firefox. The tools tab does not contain a Sync Set Up option. Why?

It looks as if Sync was already set up. what you can do is go Tools, the options, then into the sync tab. See if an account is already connected to the computer or not.

When I open a drop down menu from the tool bar, and move the pointer down the list of choices, they become constantly "darkly highlighted" and the typefaces change to black making them unreadable.

As the pointer is moved down the list of choices in a drop down box, once the pointer passes each choice, that choice becomes constantly “darkly highlighted” and the type face of that choice turns black. So, as the pointer moves down the list of choices all of the choices become a block of darkly highlighted black text, making it impossible to read the choices which were passed over by the pointer.
It is though the HTML, JavaScript or Java attribute of ''*<code>onMouseover</code>'' is missing the attribute of ''*<code> onMouseout</code>'', thereby when the user moves the pointer off the boundaries of the element, that element retains the CSS given it by the''*<code> onMouseover</code>''

I should probably add that i am working in asp!

"load module" is grayed out in the "Tools menu" (SMC 3.5)

Hello,
I've installed SMC 3.5 Update 1 on a Solaris 8.
There is no problem when creating a new node. But when selecting the "Tools" menu to load a module, the choice "Load module..." is grayed out. So I can't load modules into any node.
When I try a "right-click" on the node, and select "Attribute Editor", I only have "Infos" and "Security" in the new window, but no "Module Manager" and other things as specified in the Sun docs.
During the installation, only the "Advanced System Monitoring" add-on has been selected.
Thanks in advance for your help.

Can you tell me what kind of files can be
missing on the server? When you ran the SunMC install script (es-inst) it would have prompted you to install several different bundles (Advance System Monitor, Performance Reporting Manager, etc...). The bundle you need to say "y" to is the "Workgroup Server" package. (http://docs.sun.com/app/docs/doc/817-4071/6mjke3qv6?a=view)
If you're not sure how you answered, es-inst logs to a /var/opt/SUNWsymon/install/(es-inst+timestamp) file you can grep through.
If in doubt, simply run /opt/SUNWsymon/sbin/es-inst again on your SunMC Server (it will prompt for the location of your install files) and the script will re-prompt you for any packages you said no to last time.
If that doesn't fix it, or if you just want to get it working now, there's a workaround to the blue-folder issue:
http://www.halcyoninc.com/support/faq-sunmc2.x.php#Q408
Regards,
[email protected]
http://www.HalcyonInc.com

How do I turn off my pop-up blocker I can't find the tools icon

I can't find the tools icon I have shockwave and Java plugin 1.6.0

Click Firefox button > Options > Options > Content tab.<br />
You can still use the Menu Bar, with the Tools choice. To temporarily display the Menu Bar, press the ALT key or the F10 key and make selections from the Menu Bar while it is displayed. You can also permanently display the Menu bar if you prefer it to the Firefox button menu (see ''Common questions after updating Firefox'' below).
*See --> [https://support.mozilla.com/en-US/kb/Options%20window%20-%20Content%20panel Options window-Content panel]
*See --> [http://support.mozilla.com/en-US/kb/Pop-up+blocker Pop-up blocker]
*See --> [https://support.mozilla.com/en-US/kb/common-questions-after-updating-firefox Common questions after updating Firefox]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

WHERE IS THE TOOL BAR ON THE ELEMENT 13 PAGE.

CLICKED ON WINDOWS AND SELECTED TOOLS. TOOL ICONS CAME UP ON LEFT OF PAGE. I NEED "AUTO BLEND LAYERS"

You can click on the tool options button at the bottom. If you have a tool with multiple options e.g. clone tool, the choices can be selected from the tool options bar.
Auto-blend is usually available when using Photomerge, found under the Enhance menu; for example when stitching a panorama from several images.

XML Schemas & XML SCHEMA COLLECTIONS: XSD.exe & the tool in C:\Program Files (x86)\Microsoft SDKs\Windows\v7..0A\Bin\x64?.

Hi all,
I just read Pages 346-348 of the book "Microsoft SQL Server 2012 Bible" written by A. Jorgensen, P. LeBlanc, J. Chinchilla, J. Segarra & A. Nelson (published by Wiley) regarding XML Schemas and XML SCHEMA COLLECTIONS: Step 1. create and
save orderxml.xml
<Order OrderID="1">
<Item>
<ItemNumber>V001</ItemNumber>
<Quantity>1</Quantity>
<Price>299.99</Price>
</Item>
</Order>
Step 2. using the tool in the following location:
C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Bin\x64
Open a command prompt, and navigate the preceding directory. The syntax for creating schema is: Xsd.exe C:\temp\orderxml.xml /outputdirectory:c:\temp to create the orderxml.xsd file.
Step 3. Copy all the contents of the orderxml.xsd file to the clipboard, and create a new query window in SQL Server Management Studio, pasting in the content of the clipboard. To create the XML Schema Collection, you need to add the CREATE XML SCHEMA COLLECTION
statement to the beginning of the schema as shown below:
--MSss2012bibleP348.sql for XML Schema Collection OrderInformationSchemaCollection
-- Copied and executed by SHC (Date & Time): 24 April 2015 8:05 AM
USE ScottChangDB
GO
Create XML SCHEMA COLLECTION OrderInformationCollection AS
N'<?xml version="1.0" encoding="utf-16"?>
<xs:schema id="NewDataSet" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:msdata="urn:schema-microsoft-com:xml-msdata">
<xs:element name="Order">
<xs:sequence>
<xs:element name="Item" minOccurs="0" maxOccurs="unbounded".
<xs:complexType>
<xs:sequence>
<xs:element name="ItemNumber" type="xs:string" minOccurs="0" />
<xs:element name="Quantity" type="xs:string" minOccurs="0" />
<xs:element name="price" type="xs:string" minOccurs="0" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
<xs:attribute name="OrderID" type="xs:string" />
</xs:complexType>
</xs:element>
<xs:element name="NewDataSet" msdata" msdata:IsDataSet="true"
msdata:UseCurrentLocale="true">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="unbounded'>
<xs:element ref="Order" />
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>' ;
/* Apply it to the table/columns */
ALTER TABLE ItemInfo
ALTER COLUMN ItemData xml (OrderInformationCollection)
GO
I prepared (i) the orderxml.xml file for Step 1 and Step 2, and (ii) the MSss2012bibleP348.sql file for Step 3. But I am not sure that I can do the Steps (i) and (ii) in my PC that does not have the regular version of Microsoft SQL Server 2012 and Microsoft
Visual Studio 2012. Furthermore, I have difficulties to do Step 2 and Step 3 in my PC that is the part of Windows 7 Lan Computer System in my office: I navigated to my C:\Program Files (x86)\Microsoft SDKs\v7.0A\Bin\, I did not see the x64
thing in the Bin folder, but, I saw the xsd.exe in the Bin folder. If I click the xsd.exe and I get the following in the bottom of the PC screen:
xsd.exe Date modified:12/122011 12:55 PM    Date created: 12/12/2011 12:55 PM
Applicaion    Size:81.8 KB
Also, I see my PC screen flashes (and it looks like a dialog box with black background to flash for me to type the command) quickly. I am lost completely in this step and I don't understand the whole thing in doing Step 1, Step 2, and Step 3
I briefly summarized/described/presented above.
I need the following help from the experts of XML Schemas and XML Schema Collections in Microsoft SQL Server 2012 Management Studio:
Help #1: I don't understan the concept of Step 1, Step2 and Step 3 to do XML Schema, XSD.exe, and XML Schema Collection in the SQL Server 2012!!?? I just have the SQL Server 2012 Management Studio (SSMS2012) in my PC.
Help #2: How can I execute the xsd.exe in my C:\Program Files  (x86)\Microsoft SDKs\Windows\v7.0A\Bin\ folder?
Help #3: I just learned the basic things of creating XML SCHEMA COLLECTIONS in my SSMS2012 directly. Is the MSss2012P348.sql (I created and presented above) right for the task? How can I use clipboard to create the XML Schema Collection in my ScottChangDB
database?
Please kindly help and give me the answers/comments for Help #1, Help #2 and Help #3.
Thanks in advance,
Scott Chang

Hi Scott,
Help #1: I don't understan the concept of Step 1, Step2 and Step 3 to do XML Schema, XSD.exe, and XML Schema Collection in the SQL Server 2012!!?? I just have the SQL Server 2012 Management Studio (SSMS2012) in my PC.
Step1 and Step2 not that related to SQL Server, you can get the XSD from a given XML with an online XSD generator.
Google search: XSD generator
Help #2: How can I execute the xsd.exe in my C:\Program Files  (x86)\Microsoft SDKs\Windows\v7.0A\Bin\ folder?
Please see the link in the #1
Help #3: I just learned the basic things of creating XML SCHEMA COLLECTIONS in my SSMS2012 directly. Is the MSss2012P348.sql (I created and presented above) right for the task? How can I use clipboard to create the XML Schema Collection in
my ScottChangDB database?
See the syntax and example in
create XML schema collection
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

Is there a way to access all the items in the tools section without seeing all the options? That is to say can one use keyboard for functions? My tools menu doesn't scroll down, only goes from left to right for one page and no more options.

I can't seem to view web pages. I noticed when I clicked on the tools menu I don't get the usual drop down menu of choices. I get a horizontal listing of options with a white background. I suspect the issue may be somewhere in some settings of my tool bar or the way the system displays web pages.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />
<br />
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Camera Raw 8 the same cropping choices as are in Lightroom and Photoshop?

Seriously, how hard would it be to give Camera Raw 8 the same cropping choices as are in Lightroom and Photoshop (i.e., Fibonacci, Triangle, Diagonal, etc.)? This disparity in features is inexcusable and embarrassing. Surely the teams communicate?

I don't have CC nor LR. Just be sure you are comparing apples to apples
That is a nice statement for a Windows guy…
I never use crop in ACR because I like this feature more in PS itself. Also the inability to save crop presets in ACR makes it very limited. The ACR engine for PS and LR are the same, the body differs.
Thanks to hard yelling people we now have about the same crop tool in PS as in LR. Although I still don't like it in PS, after having used it years and years I now have to move the image instead of the crop.
Sadly the ability to rotate crop and having adjust it automatically to the borders is a very nice option. If it wasn't for this I would stay with the old classic mode.
But the OP is right, many features in different Adobe Products have somewhat the same result but sometimes very different approaches, options and tools.
Until the Adobe HQ is going to settle in Utopia we might be better off trying to learn living with it

Why the pages 09 can't display the tool bar when I use the full vision?

I have found that the numbers and the keynote always show the tool bar on the top, but pages can not,when I use the full screen.

BL,
Contrary to mende1's experience, I do not see the Toolbar in Fullscreen mode, even when accessing the Menu and Format lines by moving the cursor to the top of the screen.
I guess that the designers figured that you may not want the toolbar to come down in what is a minimalist mode. A design choice that you can object to, if you wish, by submitting Feedback from the Pages menu.
Jerry

How can I change the tool cursor from a gun sight to a circle?

Usually the tool cursor is a circle the size the tool is set to, that is, it will be 60 pixels in diameter when the tool size is set to 60 pixels. Sometimes, the tool cursor changes to a gun sight-like icon. I have no idea what I'm doing to cause that, but I'd like to know in order to 1) stop doing it, and 2) maintain my sanity. One problem is that I don't even know what to call it in order to research it. I'd be grateful for any help.

Right you are, R_Kelly. Thanks, that did the trick. Ukgaurav also pointed out some choices in the Displays and Cursors Preferences with which I fine-tuned the tool cursor appearance.

ColdFusion 11: cfclient in the context of the CFML language, not the tooling

G'day:
I am reposting this from my blog ("ColdFusion 11: <cfclient> in the context of the CFML language, not the tooling") at the suggestion of Adobe support:
@dacCfml @ColdFusion Can you post your queries at http://t.co/8UF4uCajTC for all cfclient and mobile queries.— Anit Kumar Panda (@anitkumar85) April 29, 2014
I have edited this in places to remove language that will be deemed inappropriate by the censors here. Changes I have made are in [square brackets]. The forums software here has broken some of the styling, but so be it. There is worthwhile discussion in the comments of the article on my blog: perhaps go have a read.
G'day:
This article could end up being a complete waste of space, as I am operating under more real-world re-interpretation of the raison d'être of <cfclient>, as described by Ram:
ColdFusion [11] has added support for client side CFML (<cfclient>) and this code is translated to JavaScript
Mike Henke has pointed out that the first part of this "CF11 has added support for client-side CFML" is actually ******** (my wording, not his):
"ColdFusion Splendor has added support for client side CFML" is probably phrased wrong and gave me flash backs to VBScript or CFML running in the client browser.
Maybe this is better verbiage. "ColdFusion Splendor has added support for CFML to generate JS".
Because... there's not such thing as "client-side CFML". That would imply CFML actually running on the client (ie: the browser, or the mobile device, as is the target of <cfclient> as a concept). This is absolutely not true. I know Ram went on to qualify what he meant there, but the messaging from Adobe on <cfclient> has been inaccurate. Possibly I think to the point of actual misrepresentation (in the legal sense, I mean).
What <cfclient> does is... convert CFML code to JavaScript. So let's look at that idea.
Why I say this article could be a complete waste of space is that I dunno if this is the intent of <cfclient>; because, really, the messaging from Adobe as to what <cfclient> is for is very muddied. In general the narrative about it is bundled-in with various features of ColdFusion Builder 3.0, in regards to mobile application creation and packaging (and debugging, and all sort of stuff that sounds quite nice but I don't care about as I don't use CFB).
However <cfclient> has to stand on its own merit in the CFML language, completely decoupled from CFB features. And as far as I can tell, Mike is right: as far as CFML goes, <cfclient> is a tag which tells ColdFusion to - instead of compiling to byte code - compiles the enclosed CFML code to JavaScript instead.
This of course just sets my alarm klaxons going. Because Adobe are (I choose my words carefully) [not very good] at converting CFML to client-side code. This has been borne out by <cfform>, <cflayout>, <cfpod> etc. Back in the days of CFMX7 the "CFML-to-client-side" wizards had some merit, because the client-side arena was still immature, and the team at Macromedia actually had some exposure to the idea of "website development", so they knew where the pain points were that they could possible ameliorate. Times have changed, and the client-side of things is probably now more mature an environment than CFML is - Javascript is probably are more coherent language than CFML is, now - and it is very very very clear that the current Adobe ColdFusion Team don't know the first thing about web development (they can't even write decent CFML for their own documentation, before we get onto how they'd be doing web work!), so they are completely out of their depth when it comes to addressing pain points that web devs might have these days. Not only have they not walked a mile in a web dev's shoes, they don't even - as far as I can tell - know what shoes are, or why someone would be wearing them.
And <cfclient> is a far more "meta" solution than <cfform> or <cfpod> were... at least the CFML-to-client-side solution there had a tangible target in mind. <cfclient> has removed the targets, and is just a tag designed for converting general CFML to general JS. Yikes.
600-odd words in, here's some code. This is the first-ever code I have written using <cfclient>:
<cfclient> <cfset msg = "G'day World"> <cfoutput>#message#</cfoutput> </cfclient>
So I'm off to a false start: I admit I'm sitting in the pub and I've had a few pints (probably four, I guess; this is "having some drinks before deciding to actually drink this evening" sort of level for me), and I inadvertently [messed-up] my variable names here. And this did not yield a compile error. The error just fell through to JS, where it did error
Uncaught ReferenceError: message is not defined gdayWorld.cfm:4
If, in contrast, I tried this in CoffeeScript, I'd get this:
coffee> msg = "G'day world"
'G\'day world'
coffee> alert msg
undefined
coffee>
alert message
ReferenceError: message is not defined
at eval (eval at (http://larryng.github.io/coffeescript-repl/js/main.js:96:26), :1:9)
Important note: I know nothing about CoffeeScript - it seems like a solution to a non-existent problem to me - so I just googled "hello world coffeescript" and REPLed the code on http://larryng.github.io/coffeescript-repl/.
The point is here is that ColdFusion, during the "compile" process should actually notice I am referencing a variable that doesn't exist. I'm OK with this being a runtime error in the normal CFML-compile process, because there could be many moving parts (and other files) involved in the runtime environment, but I don't think this is a valid notion with <cfclient>? Or maybe it is?
Update:As Ray points out and Aaron agrees with below: I was being unduly harsh here... it's entirely reasonable for variables to be declared in other JS code elsewhere in the response.
Anyway, once I actually write my code properly, I get this:
G'day World
On the screen. What CF actually sends back in the response is this:
<script type="text/javascript" src="/CFIDE/cfclient/cfclient_main.js"></script> <script type="text/javascript" src="/CFIDE/cfclient/cffunctions.js"></script> <meta name="viewport" content="width=device-width"> <script type='text/javascript'>globalDivStruct=null;var _$gdayWorld_func=function(){var self=this;var variables={};self.__init=function(){var localdivstruct=globalDivStruct;var __output_var="";var tmpVarArray={};message="G'day World";localdivstruct.outputvar+=message;return""}}; function __startPage__$gdayWorld(){document.write("\x3cdiv id\x3d'__cfclient_0'\x3e\x3c/div\x3e");window.ispgbuild=false;var clientDivStruct={divId:"__cfclient_0",outputvar:""};globalDivStruct=clientDivStruct;try{_$gdayWorld=new _$gdayWorld_func;_$gdayWorld.__init()}catch(__eArg){if(__eArg!=="$$$cfclient_abort$$$")throw __eArg;}__$cf.__flush(clientDivStruct)}__startPage__$gdayWorld(); </script>
[Blimey]. To output a string variable? Really? That's what you compile my CFML down to?
Gobsmacked.
And [forget] emotive things like "gobsmacked"... if one looks at the size of the response, it's 128kB to represent "G'day World" on the screen. 128kB might not be a great deal these days when it comes to a web page, but when it comes to rendering "G'day world", it's lunacy. And on a mobile phone - which intrinsically might be in an area in which one is paying a premium for data - it's just irresponsible. This is before we get to the point that it seriously should not take 128kB of data to render 11 bytes.
Blimey. To be honest I was gonna try some more tricky CFML and see how it compiled, but I've run out of will to live (and I have to concede the beer is getting the better of me, and my laptop battery is almost dead). I'll continue this, but I will let this article stand or fall on its own merit; something <cfclient> certainly seems to be unable to do, thusfar.
I'll be back on the case with this tomorrow.
Adam

The functions defined in the cffunctions.js are not namespaced. If it is namespaced, you would have to add the namespace while using a function inside cfclient.
These functions are not namespaced, so that you can use the same syntax for using a function inside and outside the cfclient block.
This is indicative of everyone's concern that you guys would just implement / encourage poor practice in your <cfclient> implementation.
How is it - given you're "compiling" the CFML anyway - you cannot translate source code that says "listlen()" into "compiled" JS that is CF.listLen() or something? Thus good CFML can be translated into good JS.
You seem to think that there's a one-to-one mapping between what the CFML says and what the resultant JS needs to be.
You've basically written a mechanism for a CFML developer to write bad JavaScript.
Well done.
Adam

In Bridge CS6, the "Tools" tab is missing the "Photoshop" option to batch process image

Hello!
Does anyone know why in Bridge cs6 under the "Tools" tab, my "Photoshop" option is missing? That is how I have always batch processed images. In Bridge, I choose the images to process, go to the "Tools" tab, down to the "Photoshop" option then to "Image Processor" and process. Now when I go into my "Tools" tab it only has the options: Batch Rename, 4 kinds of Metadata related options and Cache. Can someone tell me why this has happened and how to fix it? Thank you!!!
Eric

Hello Omke,
This problem lasted for two days. I tried many suggestions but nothing worked immediately. Suddenly I turned my computer on last night and it was fixed...inexplicably. Not sure what worked but something did. I appreciate you taking the time to offer advice.
Best,
Eric

Is SunMC the tool of choice?

Similar Messages

Maybe you are looking for